MAMostafa Abouelsoud

Mostafa Abouelsoud

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mostafa Abouelsoud has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A review on utilizing nanofluid in solar collectors: modeling, materials, challenges, and applications

    by Mostafa Abouelsoud, Saad Yassin, Ahmed Nagah, Hamouda Mousa

    Solar energy is a clean, sustainable, and renewable alternative energy source that offers a promising solution to global energy challenges. Solar collectors are one of the most effective technologies for harnessing solar energy, particularly for heating applications. Among the various types, flat plate solar collectors stand out due to their simple design, affordability, and widespread use. However, despite their advantages, these collectors suffer from efficiency limitations that need to be addressed to maximize their potential. In recent years, nanofluids—suspensions of nanoparticles in base fluids—have shown considerable promise in enhancing the thermal performance of flat plate solar collectors. This review explores the latest developments in flat plate solar collector technology, focusing on design innovations, mathematical modeling, and the role of nanofluids in improving heat transfer efficiency. Additionally, the review addresses the key challenges of using nanofluids, such as stability, cost, and potential environmental impacts, and discusses their applications across various industries. The findings conclude that while nanofluids significantly enhance collector efficiency, more research is needed to ensure long-term stability and cost-effectiveness, paving the way for future advancements in solar energy technology.


  • Open Access

    Experimental Investigation of Performance, Combustion Efficiency and Emissions of SI Engine for Several Octane Numbers

    by Hamada Mohassab, Mostafa Abouelsoud, Ahmed Nagah Shmroukh, Nouby Mahdi Ghazaly

    This research work gives a detailed study of the effect of engine speed, load, and octane number on performance and emission parameters on a four-cylinder four-stroke internal combustion spark ignition engine. Numerous tests were performed making use of a broad spectrum of engine speeds (800-3000 rpm), engine loads (0%, 25%, 50%, 75%), and octane numbers (80, 92, 95). The results revealed that higher RPMs and loads significantly enhance combustion power and thermal efficiency, while simultaneously reducing specific fuel consumption (BSFC) and carbon monoxide (CO) emission. As RPM was raised from 800 to 3000 under no-load conditions, the CO concentration was found to reduce by approximately 80%, while under full load conditions; it was even lesser. Furthermore, the study found that the emission of CO2 increases with engine speed and load about increased fuel combustion. For example, CO2 levels rose from 13% at 800 RPM to 15% at 3000 RPM, and when working in 75% loading. The study also pointed out that higher octane fuel assists in raising the combustion quality and lowering exhaust gas temperature especially when the load is high. This is well illustrated by a decrease in the exhaust gas temperature by approximately 100°C when the engine was operated with 95-octane fuel rather than 80-octane fuel under similar conditions. In addition, unburned hydrocarbon (UHC) emissions were significantly decreased with increased RPM reducing by 50 to 67% meaning that combustion at high speed was more efficient. Nitrogen oxide (NOx) emissions, however, increased with the Rpm and load, with an increase from 20 ppm of NOx at 800 Rpm to 150 ppm of NOx at 3000 Rpm because the rate of combustion is high at high engine speeds. These findings call for improved understanding and control of the operating conditions of engines and the quality of fuels available with a view to improving the overall performance of engines while reducing the rates of emissions. results also provide valuable insights that can inform the development of more efficient, environmentally friendly automotive engines and contribute to the formulation of policies aimed at reducing vehicular emissions.


  • Open Access

    Performance assessment of a cogeneration system in a sugar cane factory using energy and exergy analysis

    by Mostafa Abouelsoud, Mohamed Y. Khalil, Ramadan Hefny Ali, Hussein M. Maghrabie


  • Open Access

    The Impact of Alternative Fuels on the Performance and Emissions of Petrol Engines: A Review

    by Mohamed Hofny, Nouby Ghazaly, Ahmed Shmroukh, Mostafa Abouelsoud

    Recently, the combustion of fuel has emerged as a significant global concern. Numerous studies have highlighted the various emissions produced by different fuels. Due to the harmful pollutants and greenhouse gases emitted by fossil fuels, there has been a shift towards renewable and alternative energy sources to mitigate these adverse environmental impacts. This overview presents an in-depth analysis of current alternative fuels utilized in spark ignition (SI) engines, particularly examining the differences in performance and emissions associated with the use of hydrogen-enriched natural gas (HCNG), compressed natural gas (CNG), and ethanol as substitutes for traditional fuels. Various engine types, configurations, and operational conditions are presented to evaluate the suitability and impact of these fuels on engine performance and emission profiles. This review is intended to function as a comprehensive resource guide for future research directions, development of engine technologies, and formulation of policies related to the adoption of cleaner fuel alternatives in the internal combustion engine (ICE) sector. Biofuels show potential, but it needs to be sustainable to avoid impacting food resources as the push for greener energy continues.


  • Open Access

    Application of Artificial Neural Networks in Predicting Internal Combustion Engine Performance and Emission Characteristics: A Review of Key Methodologies and Findings

    by Hamada Mohasab, Mostafa Abouelsoud, Ahmed N. Shmroukh, Nouby Ghazaly

    The global need for fuel-efficient coupled with minimizing the environmental impacts of ICEs. This review paper highlights how different ANN methodologies such as backpropagation, recurrent neural networks (RNNs), and long short-term memory (LSTM) networks have been applied to optimize engine calibration, improve fuel efficiency, and minimize emissions across a wide range of fuel blends, including hydrogen-gasoline and ethanol-gasoline mixtures. The research focuses on the application of ANN models to predict performance indicators such as brake thermal efficiency, brake-specific fuel consumption, and emissions, reducing reliance on costly and time-consuming experimental tests. The methodology involved a systematic review of peer-reviewed studies published between 2010 and 2024. Studies were selected based on criteria such as relevance to ICE performance and emission control, use of ANN methodologies, and the availability of experimental or simulation data for validation. involves the use of advanced ANN architectures, including backpropagation, RNNs, and LSTM networks, to establish nonlinear relationships between input parameters such as engine speed, load, and fuel type, and output performance indicators. Findings show that comparison between real model and developed program enhanced from ANN model make a difference prediction capability for engine performance enhanced by at least 10 to 15 % of the traditional modeling. techniques, provide better calibration method of ICEs for better fuel consumption. efficiency and reduced emissions. This present study seeks to establish itself in matters that have not been explored in other papers or researches as follows. integration of Hybrid ANN models, which are better than conventional methods in two major trends, one of which is the improvement of the predictive accuracy and the other is the achievement of increased computational efficiency. It is found that the ANN methodologies presents a strong armory in improving the performance of ICE coupled with lowering of emissions with the possibilities of additions for further enhancements of the technology through the incorporation of other machines use of learning techniques in the future studies.


  • Open Access

    Impact force of an air-in-liquid compound drop

    by Vinod Ashok Thale, Mostafa Abouelsoud, Hossain Chizari, Marie-Jean Thoraval

    We investigate numerically the transient forces produced by an air-in-liquid compound drop impacting onto a solid surface. We demonstrate that the presence of a bubble in the drop decreases the impact force. This decrease can be mainly explained by a reduced area over which the impact pressure is applied. We systematically vary the bubble size to understand its effect on the maximum normal force. A simple scaling model for the maximum impact force is developed to accommodate the effect of bubble size.


  • Drop impact on a mesh - Viscosity effect

    by Mostafa Abouelsoud, Abderrahmane Kherbeche, Marie-Jean Thoraval


  • Spreading and retraction of the concentric impact of a drop with a sessile drop of the same liquid: Effect of surface wettability

    by Mostafa Abouelsoud, Vinod A. Thale, Ahmed N. Shmroukh, Bofeng Bai

    The concentric impact on a sessile drop is relevant in many applications, including spray coating and icing phenomena. Herein, the spreading and retraction phases yielded during the impact of a coaxial drop with a sessile drop on a solid substrate were empirically and analytically examined. We analyzed the effects of surface wettability on the impact outcomes utilizing five distinctive surfaces (i.e., smooth glass, aluminum, copper, Teflon, and coated glass). The results showed that the merged drop takes longer to attain its maximum spreading diameter at a relatively higher contact angle of the sessile drop with the solid surface. Furthermore, based on energy balance, a model for predicting the maximum spreading diameter of the drop with varying surface wettability was presented. This model considers the assumption of viscous energy loss during the merging of falling and sessile drops and at the maximum spreading diameter. Additionally, the maximum retraction height during the impact on the coated glass surface was investigated. Our model results matched well with the experimental data.


  • 10.1063/5.0050829.2

    by Mostafa Abouelsoud

    The dynamic of an impacting drop with a sessile drop of the same liquid on different solid surfaces is investigated experimentally and theoretically. By controlling the surface wettability and the impact velocity, different regimes were observed, such as complete rebounding, direct coalescence, and coalescence during the retraction phase or the spreading phase. It is observed that the complete rebounding phenomenon has widely occurred during the impact on hydrophilic surfaces. In addition, both the maximum and minimum limits of coalescence/complete rebounding thresholds were determined. During the complete rebounding phenomena, and based on the energy balance, the maximum spreading diameter of the falling drop diameter on the sessile drop was proposed. In addition, the restitution coefficient and the contact time between the falling and sessile drops were studied experimentally, and theoretically, the models show a good agreement with the experimental work.