Igor Yu. Goncharov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Igor Yu. Goncharov has a total of 143 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandr Poplavsky
Belgorod State University
8 shared publications - Alexander Ya. Kolpakov
Belgorod State National Research University
8 shared publications - Maksim N. Yapryntsev
Belgorod State National Research University
6 shared publications - Marina E. Galkina
Belgorod State National Research University
6 shared publications - Vseslav Novikov
Belgorod State National Research University
6 shared publications - Marina Kovaleva
Joint Research Center «Technology and Materials», Belgorod State National Research University, Pobeda 85, 308015 Belgorod, Russia
5 shared publications
Latest Publications
- Open Access
- 7 August 2025
- Published by Volgograd State Medical University in Journal of Volgograd State Medical University
- Vol. 22 (2) , 137-142
The use of atomic force microscopy in the comprehensive assessment of organs and tissues in diabetes mellitus
The study of biological objects using atomic force microscopy seems to be a promising direction, since it allows preserving their native structure. The use of atomic force microscopy to study nanostructural morphofunctional changes in cells of various tissues under normal conditions and pathologies can help accumulate new information about the pathogenesis of diseases, as well as become the foundation for the development of new approaches to their prevention and treatment.To study the possibilities of atomic force microscopy in studying pathomorphological changes in muscle, bone tissue and red blood cells in diabetes mellitus. The study demonstrated the possibility of using atomic force microscopy to study changes in body tissue under pathological conditions.
- 7 August 2025
- Published by Volgograd State Medical University in Journal of Volgograd State Medical University
- Vol. 22 (2) , 137-142
Open AccessThe use of atomic force microscopy in the comprehensive assessment of organs and tissues in diabetes mellitus
The study of biological objects using atomic force microscopy seems to be a promising direction, since it allows preserving their native structure. The use of atomic force microscopy to study nanostructural morphofunctional changes in cells of various tissues under normal conditions and pathologies can help accumulate new information about the pathogenesis of diseases, as well as become the foundation for the development of new approaches to their prevention and treatment.To study the possibilities of atomic force microscopy in studying pathomorphological changes in muscle, bone tissue and red blood cells in diabetes mellitus. The study demonstrated the possibility of using atomic force microscopy to study changes in body tissue under pathological conditions.
- 1 July 2023
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 63 (7) , 814-819
Textural and Adsorption Properties of Silica Doped with Iron Cations
The paper describes the textural properties and adsorption capacity of a number of silica samples doped with Fe3+ cations at concentrations of 1.5, 2.3, and 3.8 mol %. These silica samples were synthesized by hydrolysis of tetraethoxysilane at various pH values, specifically 1.5, 2.5, 5.0, and 7.0. It was found that both the pH of hydrolysis and the content of doping cations have a major effect on the specific surface area, pore volume, and pore size distribution. The micro–mesoporous silicas synthesized at pH 2.5 exhibited a weak sieve effect: the adsorption of methylene blue on their surface was lower than on the samples produced at the other pH values, whereas the adsorption of aniline was comparable for all samples. Increasing the content of iron ions in the samples enhanced the adsorption of the cationic dye due to a decrease in the electrokinetic potential of the surface.
- 1 July 2023
- Published by Pleiades Publishing Ltd in Petroleum Chemistry
- Vol. 63 (7) , 814-819
Textural and Adsorption Properties of Silica Doped with Iron Cations
The paper describes the textural properties and adsorption capacity of a number of silica samples doped with Fe3+ cations at concentrations of 1.5, 2.3, and 3.8 mol %. These silica samples were synthesized by hydrolysis of tetraethoxysilane at various pH values, specifically 1.5, 2.5, 5.0, and 7.0. It was found that both the pH of hydrolysis and the content of doping cations have a major effect on the specific surface area, pore volume, and pore size distribution. The micro–mesoporous silicas synthesized at pH 2.5 exhibited a weak sieve effect: the adsorption of methylene blue on their surface was lower than on the samples produced at the other pH values, whereas the adsorption of aniline was comparable for all samples. Increasing the content of iron ions in the samples enhanced the adsorption of the cationic dye due to a decrease in the electrokinetic potential of the surface.
- 1 January 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 49, 1423-1425
Microstructure evolution and phase transformation of ZrB2-ZrO2-MoSi2-Al coating during annealing treatment
- 1 January 2022
- Published by Elsevier in Materials Today: Proceedings
- Vol. 49, 1423-1425
Microstructure evolution and phase transformation of ZrB2-ZrO2-MoSi2-Al coating during annealing treatment
- Open Access
Oxidation Behavior and Microstructural Evolution of ZrB2–35MoSi2–10Al Composite Coating
The problem of creating and implementing high-temperature coatings for the protection of carbon–carbon (C/C) composites remains relevant due to the extremely low or insufficient heat resistance of C/C composites in an oxygen-containing environment. In the present work, detonation spraying was used for preparing new ZrB2–35MoSi2–10Al coatings on the surface of C/C composites without a sublayer. As a stabilizer of high-temperature modification of zirconia, and to increase the wettability of the surface of C/C composites, 5 wt.% Y2O3 and 10 wt.% Al were added to the initial powder mixture, respectively. The structure of the as-sprayed coating presents many lamellae piled up one upon another, and is composed of hexagonal ZrB2 (h- ZrB2), tetragonal MoSi2 (t-MoSi2), monoclinic ZrO2 (m-ZrO2), tetragonal ZrO2 (t-ZrO2), monoclinic SiO2 (m-SiO2), and cubic Al phases. The oxidation behavior and microstructural evolution of the ZrB2–35MoSi2–10Al composite coating were characterized from RT to 1400 °C in open air. During oxidation at 1400 °C, a continuous layer of silicate glass was formed on the coating surface. This layer contained cubic ZrO2 (c-ZrO2), m-ZrO2, and small amounts of mullite and zircon. The results indicated that a new ZrB2–35MoSi2–10Al composite coating could be used on the surface of C/C composites as a protective layer from oxidation at elevated temperatures.
Open AccessOxidation Behavior and Microstructural Evolution of ZrB2–35MoSi2–10Al Composite Coating
The problem of creating and implementing high-temperature coatings for the protection of carbon–carbon (C/C) composites remains relevant due to the extremely low or insufficient heat resistance of C/C composites in an oxygen-containing environment. In the present work, detonation spraying was used for preparing new ZrB2–35MoSi2–10Al coatings on the surface of C/C composites without a sublayer. As a stabilizer of high-temperature modification of zirconia, and to increase the wettability of the surface of C/C composites, 5 wt.% Y2O3 and 10 wt.% Al were added to the initial powder mixture, respectively. The structure of the as-sprayed coating presents many lamellae piled up one upon another, and is composed of hexagonal ZrB2 (h- ZrB2), tetragonal MoSi2 (t-MoSi2), monoclinic ZrO2 (m-ZrO2), tetragonal ZrO2 (t-ZrO2), monoclinic SiO2 (m-SiO2), and cubic Al phases. The oxidation behavior and microstructural evolution of the ZrB2–35MoSi2–10Al composite coating were characterized from RT to 1400 °C in open air. During oxidation at 1400 °C, a continuous layer of silicate glass was formed on the coating surface. This layer contained cubic ZrO2 (c-ZrO2), m-ZrO2, and small amounts of mullite and zircon. The results indicated that a new ZrB2–35MoSi2–10Al composite coating could be used on the surface of C/C composites as a protective layer from oxidation at elevated temperatures.
- Open Access
- 28 September 2021
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 3,p. 124-133
Influence Of Formation Conditions, Subsequent Annealing and Ion Irradiation on the Properties of Nanostructured Coatings Based on Amorphous Carbon with Gold, Silver and Nitrogen Additives
Nanostructured coatings based on amorphous carbon and carbon-doped with gold, silver, and nitrogen were obtained by the pulsed vacuum-arc method. Carbon coatings have been annealed in a vacuum as well as treated with argon ions. The alloying of carbon coatings with elements that do not form chemical bonds with the carbon matrix (Ag, Au) leads to the formation of gold or silver nanocrystallites with sizes of 2 ‑ 20 nm in the matrix of amorphous carbon, whose density depends on the concentration of the doping element. Annealing of silver-doped carbon coatings leads to the formation of islands on the surface with the size of the order of micrometers. This is due to the silver diffusion and coalescence of small islands into larger ones. The HRTEM method discovered the effect of twinning in carbon nanocrystallites after vacuum annealing as well as silver and gold in the initial state (the formation of single-crystal regions with an altered orientation of the crystal structure) in the amorphous carbon matrix. Analysis of Raman spectra of pure carbon coating and silver-doped showed that the addition of silver leads to a decrease in sp3-phase in the carbon matrix. This effect is particularly evident in the nature of changes in the spectra after vacuum annealing at 600 ºC. The addition of nitrogen in the carbon coating leads to an increase in the sp2 ‑ phase fraction, and additional annealing leads to a significant increase in the D - peak intensity and formation of clusters of the order of 5 ‑ 15 nm, which are not localized but fill the entire space. Analysis of the coating a-C: Au irradiation with argon ions shows that the number of nanopitches decreased after ion irradiation, simultaneously decreased surface roughness degree, besides, decreased electrical conductivity of the coating as a result of decreased gold content. It was found that the conditions of nanostructured coatings and their subsequent processing allow controlling the properties of nanocoatings (structure, size of nanoparticles, surface topography, and electrical conductivity).
- 28 September 2021
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 3,p. 124-133
Open AccessInfluence Of Formation Conditions, Subsequent Annealing and Ion Irradiation on the Properties of Nanostructured Coatings Based on Amorphous Carbon with Gold, Silver and Nitrogen Additives
Nanostructured coatings based on amorphous carbon and carbon-doped with gold, silver, and nitrogen were obtained by the pulsed vacuum-arc method. Carbon coatings have been annealed in a vacuum as well as treated with argon ions. The alloying of carbon coatings with elements that do not form chemical bonds with the carbon matrix (Ag, Au) leads to the formation of gold or silver nanocrystallites with sizes of 2 ‑ 20 nm in the matrix of amorphous carbon, whose density depends on the concentration of the doping element. Annealing of silver-doped carbon coatings leads to the formation of islands on the surface with the size of the order of micrometers. This is due to the silver diffusion and coalescence of small islands into larger ones. The HRTEM method discovered the effect of twinning in carbon nanocrystallites after vacuum annealing as well as silver and gold in the initial state (the formation of single-crystal regions with an altered orientation of the crystal structure) in the amorphous carbon matrix. Analysis of Raman spectra of pure carbon coating and silver-doped showed that the addition of silver leads to a decrease in sp3-phase in the carbon matrix. This effect is particularly evident in the nature of changes in the spectra after vacuum annealing at 600 ºC. The addition of nitrogen in the carbon coating leads to an increase in the sp2 ‑ phase fraction, and additional annealing leads to a significant increase in the D - peak intensity and formation of clusters of the order of 5 ‑ 15 nm, which are not localized but fill the entire space. Analysis of the coating a-C: Au irradiation with argon ions shows that the number of nanopitches decreased after ion irradiation, simultaneously decreased surface roughness degree, besides, decreased electrical conductivity of the coating as a result of decreased gold content. It was found that the conditions of nanostructured coatings and their subsequent processing allow controlling the properties of nanocoatings (structure, size of nanoparticles, surface topography, and electrical conductivity).
- Open Access
Kinetics Investigation of the Formation of a Gas-Resistant Glass-Forming Layer during the Oxidation of ZrB2-MoSi2-Y2O3-Al Coatings in the Air Atmosphere
In this article, the coatings of ZrB2-xMoSi2-Y2O3-yAl (x = 24, 35, 45 wt %; y = 10, 15, 20 wt %) were applied to the surface of a carbon/carbon composite to protect against high-temperature oxidation using a multi-chamber detonation accelerator. The kinetic analysis of the formation processes of a glass-forming layer during the oxidation of the initial components of the system ZrB2-MoSi2-Y2O3-Al in an air atmosphere at a temperature of 1400 °C was carried out and the kinetically significant stages of the heterogeneous reaction were determined. It is shown that the speed and density of the formation of a glassy matrix can be adjusted by fine-tuning the ratio of components in the initial powder.
Open AccessKinetics Investigation of the Formation of a Gas-Resistant Glass-Forming Layer during the Oxidation of ZrB2-MoSi2-Y2O3-Al Coatings in the Air Atmosphere
In this article, the coatings of ZrB2-xMoSi2-Y2O3-yAl (x = 24, 35, 45 wt %; y = 10, 15, 20 wt %) were applied to the surface of a carbon/carbon composite to protect against high-temperature oxidation using a multi-chamber detonation accelerator. The kinetic analysis of the formation processes of a glass-forming layer during the oxidation of the initial components of the system ZrB2-MoSi2-Y2O3-Al in an air atmosphere at a temperature of 1400 °C was carried out and the kinetically significant stages of the heterogeneous reaction were determined. It is shown that the speed and density of the formation of a glassy matrix can be adjusted by fine-tuning the ratio of components in the initial powder.
- 1 January 2021
- Published by Sumy State University in Journal of Nano- and Electronic Physics
- Vol. 13 (6) , 06013-1
Effect of the Content of Molybdenum Disilicide on the Microstructure and Phase Transformations of ZrB2-MoSi2-10Al Coatings upon Annealing in Air
Journal of Nano- and Electronic Physics. Scientific journal. ISSN: 2077-6772. Journal abbreviation: J. Nano- Electron. Phys. No page charges. All articles are freely available on-line. Issued 4 times per year. Publisher: Sumy State University. (Sumy, Ukraine)
- 1 January 2021
- Published by Sumy State University in Journal of Nano- and Electronic Physics
- Vol. 13 (6) , 06013-1
Effect of the Content of Molybdenum Disilicide on the Microstructure and Phase Transformations of ZrB2-MoSi2-10Al Coatings upon Annealing in Air
Journal of Nano- and Electronic Physics. Scientific journal. ISSN: 2077-6772. Journal abbreviation: J. Nano- Electron. Phys. No page charges. All articles are freely available on-line. Issued 4 times per year. Publisher: Sumy State University. (Sumy, Ukraine)
- Open Access
- 1 May 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 862 (2)
Residual stresses in Ti6Al4V alloy after surface texturing by femtosecond laser pulses
Surface topography and residual stresses in surface layers of α + β titanium alloy Ti6Al4V textured by 1030-nm, 320-fs-laser pulses were studied by scanning electron microscopy and X-ray diffraction analysis. It was found that multipulse laser processing leads to the formation of laser-induced periodic surface structures (LIPSS) on the surface of Ti6Al4V alloy. XRD studies showed that depending on the laser pulse fluence, both tensile and compressive residual stresses are formed in thin near-surface layers.
- 1 May 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 862 (2)
Open AccessResidual stresses in Ti6Al4V alloy after surface texturing by femtosecond laser pulses
Surface topography and residual stresses in surface layers of α + β titanium alloy Ti6Al4V textured by 1030-nm, 320-fs-laser pulses were studied by scanning electron microscopy and X-ray diffraction analysis. It was found that multipulse laser processing leads to the formation of laser-induced periodic surface structures (LIPSS) on the surface of Ti6Al4V alloy. XRD studies showed that depending on the laser pulse fluence, both tensile and compressive residual stresses are formed in thin near-surface layers.
- 1 April 2020
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 987, 53-58
Dense ZrB2-MoSi2 Composite Coating Fabricated by a New Multi-Chamber Detonation Accelerator on Carbon/Carbon Composites
A new multi-chamber detonation accelerator (MCDS) was applied to fabricate ZrB2–MoSi2 composite coating containing 20 mol.% of MoSi2 on carbon/carbon composites. Phase composition and microstructure of the coating were characterized by X-ray diffraction and scanning electron microscopy. The ZrB2–20MoSi2 coating displayed compact and lamellar microstructure with porosity lower than 1%, where SiO2 phase was uniformly distributed in the ZrO2 matrix. The coating was well-adhered with carbon/carbon composites. Silica, m-ZrO2, and small amount of Zr(MoO4)2 were formed.
- 1 April 2020
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 987, 53-58
Dense ZrB2-MoSi2 Composite Coating Fabricated by a New Multi-Chamber Detonation Accelerator on Carbon/Carbon Composites
A new multi-chamber detonation accelerator (MCDS) was applied to fabricate ZrB2–MoSi2 composite coating containing 20 mol.% of MoSi2 on carbon/carbon composites. Phase composition and microstructure of the coating were characterized by X-ray diffraction and scanning electron microscopy. The ZrB2–20MoSi2 coating displayed compact and lamellar microstructure with porosity lower than 1%, where SiO2 phase was uniformly distributed in the ZrO2 matrix. The coating was well-adhered with carbon/carbon composites. Silica, m-ZrO2, and small amount of Zr(MoO4)2 were formed.
- 1 January 2020
- Published by Sumy State University in Journal of Nano- and Electronic Physics
- Vol. 12 (1) , 01022-1
Production, Structure and Properties of Coatings Based on Al2O3 Obtained by Magnetron Method
Journal of Nano- and Electronic Physics. Scientific journal. ISSN: 2077-6772. Journal abbreviation: J. Nano- Electron. Phys. No page charges. All articles are freely available on-line. Issued 4 times per year. Publisher: Sumy State University. (Sumy, Ukraine)
- 1 January 2020
- Published by Sumy State University in Journal of Nano- and Electronic Physics
- Vol. 12 (1) , 01022-1
Production, Structure and Properties of Coatings Based on Al2O3 Obtained by Magnetron Method
Journal of Nano- and Electronic Physics. Scientific journal. ISSN: 2077-6772. Journal abbreviation: J. Nano- Electron. Phys. No page charges. All articles are freely available on-line. Issued 4 times per year. Publisher: Sumy State University. (Sumy, Ukraine)