Jianan Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianan Yang has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Lixian Zhang
Harbin Institute of Technology
19 shared publications - Tong Wu
Harbin Institute of Technology
11 shared publications - Yimin Zhu
Harbin Institute of Technology
6 shared publications - Ming Liu
School of Astronautics, Harbin Institute of Technology, Harbin 150001, China
4 shared publications - Yihang Ding
School of Astronautics, Harbin Institute of Technology, Harbin, China
4 shared publications Yimin Zhu
School of Astronautics, Harbin Institute of Technology, the Peoples Republic of China
4 shared publications
Latest Publications
- 2 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 11910-11922
Robust Vibration Control for Large-Scale Flexible Appendages of Spacecraft via Switching Distributed Model Predictive Control
This paper investigates the issue of vibration control for the large-scale flexible appendage of spacecraft. A spatially interconnected system (SIS) model is introduced to decompose the high-dimensional appendage system, characterized by partial differential equations, into a series of physically interconnected subsystems, for computational tractability of online optimization. To describe the mode switching caused by temperature variations, a lower-bounded Markov stochastic process is incorporated within the SIS model. Based on the improved SIS model, an efficient consensus distributed model prediction controller is developed, where a more lightweight communication graph is adopted to further improve online computation efficiency. Meanwhile, the concept of dissipativity is introduced into the design of model predictive control (MPC) cost function, effectively improving the robustness and reducing the conservatism. Illustrative simulations are conducted on a satellite with a large solar panel, and the results demonstrate the effectiveness and applicability of the proposed method.
- 2 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 11910-11922
Robust Vibration Control for Large-Scale Flexible Appendages of Spacecraft via Switching Distributed Model Predictive Control
This paper investigates the issue of vibration control for the large-scale flexible appendage of spacecraft. A spatially interconnected system (SIS) model is introduced to decompose the high-dimensional appendage system, characterized by partial differential equations, into a series of physically interconnected subsystems, for computational tractability of online optimization. To describe the mode switching caused by temperature variations, a lower-bounded Markov stochastic process is incorporated within the SIS model. Based on the improved SIS model, an efficient consensus distributed model prediction controller is developed, where a more lightweight communication graph is adopted to further improve online computation efficiency. Meanwhile, the concept of dissipativity is introduced into the design of model predictive control (MPC) cost function, effectively improving the robustness and reducing the conservatism. Illustrative simulations are conducted on a satellite with a large solar panel, and the results demonstrate the effectiveness and applicability of the proposed method.
- 29 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 5230-5239
Model-Predictive Control for Singular Semi-Markov Jump Systems With Application to Hybrid Terrestrial/Aerial Bicopters
This paper is concerned with the issue of model predictive control (MPC) for a class of stochastic hybrid singular systems, where a semi-Markov kernel orchestrates the switching among the system modes with bounded sojourn time. An MPC framework is proposed accounting for singular subsystems, a more common case in actual application for the first time, which departs from conventional assumptions of mode-independent subsystem dimensions. By virtue of the receding horizon optimization, infinite horizon model predictive controllers with the recursive feasibility and stochastic stability guarantee are obtained. The necessity and validity of the proposed model predictive controllers are demon strated using illustrative examples involving hybrid terrestrial/aerial bicopters.
- 29 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 5230-5239
Model-Predictive Control for Singular Semi-Markov Jump Systems With Application to Hybrid Terrestrial/Aerial Bicopters
This paper is concerned with the issue of model predictive control (MPC) for a class of stochastic hybrid singular systems, where a semi-Markov kernel orchestrates the switching among the system modes with bounded sojourn time. An MPC framework is proposed accounting for singular subsystems, a more common case in actual application for the first time, which departs from conventional assumptions of mode-independent subsystem dimensions. By virtue of the receding horizon optimization, infinite horizon model predictive controllers with the recursive feasibility and stochastic stability guarantee are obtained. The necessity and validity of the proposed model predictive controllers are demon strated using illustrative examples involving hybrid terrestrial/aerial bicopters.
- 21 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cybernetics
- Vol. 56 (6) , 3357-3369
Smooth Control of Asynchronously Switched Fuzzy Systems With Partly Stochastic Sojourn Time
This article investigates the smooth control problem of switched fuzzy systems, where the modes asynchronously switch under a partly stochastic sojourn time (PSST) switching signal, i.e., a duration of the sojourn time is governed by a random distribution. The formulated PSST switching signal is composed of a mode-dependent activated time and a duration subject to certain stochastic processes, which covers the conventional (average) dwell time (DT) switching signals or stochastic switching signals as special cases. Considering the measuring and computing delay in mode and membership degree identifying of the fuzzy switched systems, the asynchronous phenomena caused by unmatched case between control and system modes are included in the PSST switching signal, and a detected-mode-based Lyapunov candidate is formulated for the mean-square stability (MSS) and robustness analysis, which has not been considered before. To overcome the undesired control bump between adjacent modes, a multistage membership degree interpolation approach is proposed to obtain a smooth control transition after the asynchronous duration to carry out an anti-asynchronously stochastically smoothly switched fuzzy controller (A2S3-FC), unlike the existing literature that only considers part of the property of the practical systems. The effectiveness and the advantages of the proposed A2S3-FC are verified via a numerical example and a simulation of aerial manipulator attitude control.
- 21 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cybernetics
- Vol. 56 (6) , 3357-3369
Smooth Control of Asynchronously Switched Fuzzy Systems With Partly Stochastic Sojourn Time
This article investigates the smooth control problem of switched fuzzy systems, where the modes asynchronously switch under a partly stochastic sojourn time (PSST) switching signal, i.e., a duration of the sojourn time is governed by a random distribution. The formulated PSST switching signal is composed of a mode-dependent activated time and a duration subject to certain stochastic processes, which covers the conventional (average) dwell time (DT) switching signals or stochastic switching signals as special cases. Considering the measuring and computing delay in mode and membership degree identifying of the fuzzy switched systems, the asynchronous phenomena caused by unmatched case between control and system modes are included in the PSST switching signal, and a detected-mode-based Lyapunov candidate is formulated for the mean-square stability (MSS) and robustness analysis, which has not been considered before. To overcome the undesired control bump between adjacent modes, a multistage membership degree interpolation approach is proposed to obtain a smooth control transition after the asynchronous duration to carry out an anti-asynchronously stochastically smoothly switched fuzzy controller (A2S3-FC), unlike the existing literature that only considers part of the property of the practical systems. The effectiveness and the advantages of the proposed A2S3-FC are verified via a numerical example and a simulation of aerial manipulator attitude control.
- 20 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (2) , 2588-2599
Robust and Efficient Model Predictive Attitude Control for Hybrid Terrestrial-Aerial Quadrotors
This article is concerned with the issue of optimal attitude control for hybrid terrestrial-aerial quadrotors (HyTAQs), a branch of unmanned vehicles capable of moving by both terrestrial and aerial locomotion. To resist disturbance torques while ensuring operational constraints, a robust model predictive attitude control approach is proposed for HyTAQs as a first attempt. To address the difficulty in the specific dimension-varying dynamics of HyTAQs, a switched descriptor system model is constructed, with consideration of the bounded disturbances and stochastic switching on locomotion mode. New results including the mode-dependent robust positively-invariant (RPI) set and state-dimension-varying performance bound are developed, serving as the theoretical foundation for the convex min-max optimization framework for HyTAQs. To overcome computational bottlenecks in conventional min-max MPC, an efficient offline-to-online solving algorithm is designed, and new criteria of recursive feasibility and mean-square input-to-state stability is derived, ensuring a rigorous performance guarantee of the proposed MPC. Experimental results verify the effectiveness and advantages of the proposed approach, which outperforms existing control approaches in terms of rapidity, robustness, and computational cost.
- 20 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (2) , 2588-2599
Robust and Efficient Model Predictive Attitude Control for Hybrid Terrestrial-Aerial Quadrotors
This article is concerned with the issue of optimal attitude control for hybrid terrestrial-aerial quadrotors (HyTAQs), a branch of unmanned vehicles capable of moving by both terrestrial and aerial locomotion. To resist disturbance torques while ensuring operational constraints, a robust model predictive attitude control approach is proposed for HyTAQs as a first attempt. To address the difficulty in the specific dimension-varying dynamics of HyTAQs, a switched descriptor system model is constructed, with consideration of the bounded disturbances and stochastic switching on locomotion mode. New results including the mode-dependent robust positively-invariant (RPI) set and state-dimension-varying performance bound are developed, serving as the theoretical foundation for the convex min-max optimization framework for HyTAQs. To overcome computational bottlenecks in conventional min-max MPC, an efficient offline-to-online solving algorithm is designed, and new criteria of recursive feasibility and mean-square input-to-state stability is derived, ensuring a rigorous performance guarantee of the proposed MPC. Experimental results verify the effectiveness and advantages of the proposed approach, which outperforms existing control approaches in terms of rapidity, robustness, and computational cost.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 12572-12582
Control Synthesis of Singular PDT Switched Systems With State Constraints and Application to HyTAQs
This paper investigates the problem of control synthesis for a class of continuous-time singular switched systems, based on which a modeling and control framework is developed for Hybrid Terrestrial and Aerial Quadrotors (HyTAQs). To accurately describe the frequent switching phenomenon for HyTAQs during the landing process, persistent dwell time (PDT) switching signals are taken into consideration. Besides, mode-dependent state constraints are introduced to singular switched systems, which are more practical and general than the ones considered in earlier studies. Numerically testable stability criteria are obtained, and thereby the conditions on the existence of controllers capable of satisfying the mode-dependent state constraints are derived. Finally, two illustrative examples including HyTAQs are presented to demonstrate the necessity and validity of the designed controllers.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 12572-12582
Control Synthesis of Singular PDT Switched Systems With State Constraints and Application to HyTAQs
This paper investigates the problem of control synthesis for a class of continuous-time singular switched systems, based on which a modeling and control framework is developed for Hybrid Terrestrial and Aerial Quadrotors (HyTAQs). To accurately describe the frequent switching phenomenon for HyTAQs during the landing process, persistent dwell time (PDT) switching signals are taken into consideration. Besides, mode-dependent state constraints are introduced to singular switched systems, which are more practical and general than the ones considered in earlier studies. Numerically testable stability criteria are obtained, and thereby the conditions on the existence of controllers capable of satisfying the mode-dependent state constraints are derived. Finally, two illustrative examples including HyTAQs are presented to demonstrate the necessity and validity of the designed controllers.
- 12 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/CAA Journal of Automatica Sinica
- Vol. 11 (7) , 1579-1590
Interpolated Bumpless Transfer Control for Asynchronously Switched Linear Systems
This paper revisits the problem of bumpless transfer control (BTC) for discrete-time nondeterministic switched linear systems. The general case of asynchronous switching is considered for the first time in the field of BTC for switched systems. A new approach called interpolated bumpless transfer control (IBTC) is proposed, where the bumpless transfer controllers are formulated with the combination of the two adjacent mode-dependent controller gains, and are interpolated for finite steps once the switching is detected. In contrast with the existing approaches, IBTC does not necessarily run through the full interval of subsystems, as well as possesses the time-varying controller gains (with more flexibility and less conservatism) achieved from a control synthesis allowing for the stability and other performance of the whole switched system. Sufficient conditions ensuring stability and $H_{\infty}$ performance of the underlying system by IBTC are developed, and numerical examples verify the theoretical findings.- 12 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/CAA Journal of Automatica Sinica
- Vol. 11 (7) , 1579-1590
Interpolated Bumpless Transfer Control for Asynchronously Switched Linear Systems
This paper revisits the problem of bumpless transfer control (BTC) for discrete-time nondeterministic switched linear systems. The general case of asynchronous switching is considered for the first time in the field of BTC for switched systems. A new approach called interpolated bumpless transfer control (IBTC) is proposed, where the bumpless transfer controllers are formulated with the combination of the two adjacent mode-dependent controller gains, and are interpolated for finite steps once the switching is detected. In contrast with the existing approaches, IBTC does not necessarily run through the full interval of subsystems, as well as possesses the time-varying controller gains (with more flexibility and less conservatism) achieved from a control synthesis allowing for the stability and other performance of the whole switched system. Sufficient conditions ensuring stability and $H_{\infty}$ performance of the underlying system by IBTC are developed, and numerical examples verify the theoretical findings.- 9 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 8, 382-387
Efficient Model Predictive Control for Markov Jump Nonlinear Systems via Controllable Sets and Sum-of-Square Programming
This letter is concerned with computationally efficient one-step model predictive control (MPC) for a class of Markov jump nonlinear systems (MJNSs) subject to polynomial vector field and hard constraints. To ensure the recursive feasibility, Sum-of-Square (SOS) conditions are developed to characterize mode-dependent one-step controllable sets for MJNSs. On this basis, the constraints of one-step ahead state can be offline designed, formulating a low computational demanding MPC with flexible performance optimization. Considering the effect of mode switching, the one-step MPC is extended with a stochastic performance index, and the terminal sets are designed with stochastic performance optimization and invariance guarantee. The proposed efficient one-step MPC approach ensures the feasibility and mean-square stability for MJNSs, while achieving lower conservatism in feasible region and performance optimization compared with existing approaches. An illustrative example is provided to show the potential and merits of the proposed MPC approach.
- 9 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 8, 382-387
Efficient Model Predictive Control for Markov Jump Nonlinear Systems via Controllable Sets and Sum-of-Square Programming
This letter is concerned with computationally efficient one-step model predictive control (MPC) for a class of Markov jump nonlinear systems (MJNSs) subject to polynomial vector field and hard constraints. To ensure the recursive feasibility, Sum-of-Square (SOS) conditions are developed to characterize mode-dependent one-step controllable sets for MJNSs. On this basis, the constraints of one-step ahead state can be offline designed, formulating a low computational demanding MPC with flexible performance optimization. Considering the effect of mode switching, the one-step MPC is extended with a stochastic performance index, and the terminal sets are designed with stochastic performance optimization and invariance guarantee. The proposed efficient one-step MPC approach ensures the feasibility and mean-square stability for MJNSs, while achieving lower conservatism in feasible region and performance optimization compared with existing approaches. An illustrative example is provided to show the potential and merits of the proposed MPC approach.
- 25 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cybernetics
- Vol. 54 (9) , 5441-5450
Switched Control of HyTAQs: A Framework of Stochastic Hybrid Fuzzy Systems With Variable Dimensions
This article is concerned with the switched control of hybrid terrestrial and aerial quadrotors (HyTAQs) via stochastic hybrid fuzzy system methodology, in which the terrestrial and aerial mode switching is subject to a Markov process with lower-bounded sojourn time. For the first time, the bimodal nonlinear attitude dynamics of HyTAQs is analyzed and modeled based on the Takagi–Sugeno (T–S) fuzzy model, and switched fuzzy controllers are developed to stabilize the hybrid fuzzy system. The characteristic of state dimension switching caused by ground contact is modeled via the singular system presentation with mode-dependent singularity matrices, based on which numerically testable criteria of stability and stabilization in the stochastic sense are derived. Compared with the previous control approaches based on Markov jump systems, the proposed one is able to describe the deterministic dwelling duration in practice and integrate multiple subsystems with algebraic equations of different dimensions, while achieving lower conservatism. Illustrative examples are provided to demonstrate the effectiveness and potential of the designed variable-dimension fuzzy controllers.
- 25 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cybernetics
- Vol. 54 (9) , 5441-5450
Switched Control of HyTAQs: A Framework of Stochastic Hybrid Fuzzy Systems With Variable Dimensions
This article is concerned with the switched control of hybrid terrestrial and aerial quadrotors (HyTAQs) via stochastic hybrid fuzzy system methodology, in which the terrestrial and aerial mode switching is subject to a Markov process with lower-bounded sojourn time. For the first time, the bimodal nonlinear attitude dynamics of HyTAQs is analyzed and modeled based on the Takagi–Sugeno (T–S) fuzzy model, and switched fuzzy controllers are developed to stabilize the hybrid fuzzy system. The characteristic of state dimension switching caused by ground contact is modeled via the singular system presentation with mode-dependent singularity matrices, based on which numerically testable criteria of stability and stabilization in the stochastic sense are derived. Compared with the previous control approaches based on Markov jump systems, the proposed one is able to describe the deterministic dwelling duration in practice and integrate multiple subsystems with algebraic equations of different dimensions, while achieving lower conservatism. Illustrative examples are provided to demonstrate the effectiveness and potential of the designed variable-dimension fuzzy controllers.
- 24 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 70 (1) , 4213-4225
Satellite Early Anomaly Detection Using an Advanced Transformer Architecture for Non-Stationary Telemetry Data
Data-driven methodologies are indispensable for early satellite anomaly detection. However, their effectiveness in capturing temporal dependencies within non-stationary telemetry data is still not ideal. In the field of satellite anomaly detection using reconstruction theory, this limitation can make it unclear whether the distribution shifts of reconstruction errors are caused by inadequate training or the actual emergence of real anomalies. To address these challenges, we propose the Seasonal Decomposition Cross Attention Transformer (SDCA-Former), a new Transformer architecture specifically designed to effectively extract temporal dependencies in non-stationary satellite telemetry data, thereby enabling more precise early warning of satellite anomalies. Firstly, building upon the foundational architecture of the Vanilla Transformer, the SDCA-Former integrates a series of enhancements, including the Temporal Convolutional Network-based Position Encoding (TCNPE), Encoder architecture refinements, and the Decoder utilizing SDCA modules. Secondly, we developed a comprehensive satellite anomaly detection framework centered on the SDCA-Former, including technical components such as telemetry data feature engineering, anomaly scoring, and determination of anomaly thresholds. Lastly, we verified the effectiveness and superiority of the proposed method on a dataset composed of telemetry data from a Geostationary Earth Orbit (GEO) satellite. Notably, our approach achieved an early warning for anomalies up to four months in advance.
- 24 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 70 (1) , 4213-4225
Satellite Early Anomaly Detection Using an Advanced Transformer Architecture for Non-Stationary Telemetry Data
Data-driven methodologies are indispensable for early satellite anomaly detection. However, their effectiveness in capturing temporal dependencies within non-stationary telemetry data is still not ideal. In the field of satellite anomaly detection using reconstruction theory, this limitation can make it unclear whether the distribution shifts of reconstruction errors are caused by inadequate training or the actual emergence of real anomalies. To address these challenges, we propose the Seasonal Decomposition Cross Attention Transformer (SDCA-Former), a new Transformer architecture specifically designed to effectively extract temporal dependencies in non-stationary satellite telemetry data, thereby enabling more precise early warning of satellite anomalies. Firstly, building upon the foundational architecture of the Vanilla Transformer, the SDCA-Former integrates a series of enhancements, including the Temporal Convolutional Network-based Position Encoding (TCNPE), Encoder architecture refinements, and the Decoder utilizing SDCA modules. Secondly, we developed a comprehensive satellite anomaly detection framework centered on the SDCA-Former, including technical components such as telemetry data feature engineering, anomaly scoring, and determination of anomaly thresholds. Lastly, we verified the effectiveness and superiority of the proposed method on a dataset composed of telemetry data from a Geostationary Earth Orbit (GEO) satellite. Notably, our approach achieved an early warning for anomalies up to four months in advance.