Yimin Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yimin Zhu has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Lixian Zhang
Harbin Institute of Technology
15 shared publications - Jianan Yang
School of Astronautics, Harbin Institute of Technology, Harbin, China
6 shared publications - Tong Wu
Harbin Institute of Technology
6 shared publications - Yifei Dong
School of Astronautics, Harbin Institute of Technology, Harbin, China
4 shared publications - Xiaoyu Ji
School of Astronautics, Harbin Institute of Technology, Harbin, China
3 shared publications - Yihang Ding
School of Astronautics, Harbin Institute of Technology, Harbin, China
3 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (5) , 5470-5479
FAH-ptf: A Class of Fully Actuated Hexacopter Based on Passively-Tilting Frame
This article presents a novel fully actuated hexacopter based on passively-tilting frame (FAH-ptf). The proposed mechanism design generates controllable thrust via rotor-thrust-driven passive tilting, and achieves independent control of translational and rotational motions using only six rotors without servo motors. Compared to existing fully actuated unmanned aerial vehicles, this structure eliminates internal thrust cancellation and minimizes the number of actuators, significantly improving flight efficiency and endurance under equivalent payload conditions. Based on the derived dynamic model of FAH-ptf, a hierarchical fully actuated controller is designed to ensure stable and efficient operation. Experimental results validate the full actuation capability and energy efficiency of FAH-ptf, demonstrating consistent high performance across varying tilt angles.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (5) , 5470-5479
FAH-ptf: A Class of Fully Actuated Hexacopter Based on Passively-Tilting Frame
This article presents a novel fully actuated hexacopter based on passively-tilting frame (FAH-ptf). The proposed mechanism design generates controllable thrust via rotor-thrust-driven passive tilting, and achieves independent control of translational and rotational motions using only six rotors without servo motors. Compared to existing fully actuated unmanned aerial vehicles, this structure eliminates internal thrust cancellation and minimizes the number of actuators, significantly improving flight efficiency and endurance under equivalent payload conditions. Based on the derived dynamic model of FAH-ptf, a hierarchical fully actuated controller is designed to ensure stable and efficient operation. Experimental results validate the full actuation capability and energy efficiency of FAH-ptf, demonstrating consistent high performance across varying tilt angles.
- 2 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 11910-11922
Robust Vibration Control for Large-Scale Flexible Appendages of Spacecraft via Switching Distributed Model Predictive Control
This paper investigates the issue of vibration control for the large-scale flexible appendage of spacecraft. A spatially interconnected system (SIS) model is introduced to decompose the high-dimensional appendage system, characterized by partial differential equations, into a series of physically interconnected subsystems, for computational tractability of online optimization. To describe the mode switching caused by temperature variations, a lower-bounded Markov stochastic process is incorporated within the SIS model. Based on the improved SIS model, an efficient consensus distributed model prediction controller is developed, where a more lightweight communication graph is adopted to further improve online computation efficiency. Meanwhile, the concept of dissipativity is introduced into the design of model predictive control (MPC) cost function, effectively improving the robustness and reducing the conservatism. Illustrative simulations are conducted on a satellite with a large solar panel, and the results demonstrate the effectiveness and applicability of the proposed method.
- 2 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62 (00189251) , 11910-11922
Robust Vibration Control for Large-Scale Flexible Appendages of Spacecraft via Switching Distributed Model Predictive Control
This paper investigates the issue of vibration control for the large-scale flexible appendage of spacecraft. A spatially interconnected system (SIS) model is introduced to decompose the high-dimensional appendage system, characterized by partial differential equations, into a series of physically interconnected subsystems, for computational tractability of online optimization. To describe the mode switching caused by temperature variations, a lower-bounded Markov stochastic process is incorporated within the SIS model. Based on the improved SIS model, an efficient consensus distributed model prediction controller is developed, where a more lightweight communication graph is adopted to further improve online computation efficiency. Meanwhile, the concept of dissipativity is introduced into the design of model predictive control (MPC) cost function, effectively improving the robustness and reducing the conservatism. Illustrative simulations are conducted on a satellite with a large solar panel, and the results demonstrate the effectiveness and applicability of the proposed method.
- 27 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. PP (10636536) , 1-8
Flexbee: A Grasping and Perching UAV Based on Soft Vector-Propulsion Nozzle
To improve environmental adaptability maneuverability, and structural reuse, for cooperative tasks in existing grasping/perching uncrewed aerial vehicles (UAVs), we propose a soft vector-propulsion nozzle (SVPN) and develop Flexbee, a grasping and perching UAV built upon this concept, and it enables fully-actuated flight as well as grasping and perching. By redesigning both the mechanism and the system architecture, the SVPN consolidates multiple functions into a single modular unit, thereby expanding the achievable grasping range and improving perching versatility compared with add-on, functionally independent mechanisms. Moreover, fully-actuated flight enhances controllability and operational robustness during aerial interaction. This study covers the complete system design, including mechanical design, dynamic modeling, and controller design, which demonstrates the novelty and feasibility of the proposed platform through real-world experiments.
- 27 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. PP (10636536) , 1-8
Flexbee: A Grasping and Perching UAV Based on Soft Vector-Propulsion Nozzle
To improve environmental adaptability maneuverability, and structural reuse, for cooperative tasks in existing grasping/perching uncrewed aerial vehicles (UAVs), we propose a soft vector-propulsion nozzle (SVPN) and develop Flexbee, a grasping and perching UAV built upon this concept, and it enables fully-actuated flight as well as grasping and perching. By redesigning both the mechanism and the system architecture, the SVPN consolidates multiple functions into a single modular unit, thereby expanding the achievable grasping range and improving perching versatility compared with add-on, functionally independent mechanisms. Moreover, fully-actuated flight enhances controllability and operational robustness during aerial interaction. This study covers the complete system design, including mechanical design, dynamic modeling, and controller design, which demonstrates the novelty and feasibility of the proposed platform through real-world experiments.
- 11 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1001317
An Improved SFCW-GPR B-Scan Feature Enhancement Method for Underground Target Positioning Error Suppressing
Ground Penetrating Radar (GPR) is an effective tool for quickly identifying and locating underground targets by utilizing the reflection and scattering of electromagnetic waves at media discontinuities. However, for underground targets, there is a lot of background clutter surrounding them. Clutter will cover echoes reflected from underground targets, which makes it difficult to accurately detect the location of the targets. Thus, we propose an improved B-Scan feature enhancement method based on a denoising source separation (DSS) algorithm. In addition, considering that the Cramer-Rao Lower Bound (CRLB) is the lowest achievable variance on an unbiased estimate, we evaluate the performance of the improved method and the classical method by calculating the CRLB of step-frequency-continuous-wave (SFCW) GPR for the first time. We find that the CRLB of the mid-point position generated by the improved method is lower than that of the classical method, which means that the measurement accuracy of the improved method has a higher theoretical limitation.
- 11 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1001317
An Improved SFCW-GPR B-Scan Feature Enhancement Method for Underground Target Positioning Error Suppressing
Ground Penetrating Radar (GPR) is an effective tool for quickly identifying and locating underground targets by utilizing the reflection and scattering of electromagnetic waves at media discontinuities. However, for underground targets, there is a lot of background clutter surrounding them. Clutter will cover echoes reflected from underground targets, which makes it difficult to accurately detect the location of the targets. Thus, we propose an improved B-Scan feature enhancement method based on a denoising source separation (DSS) algorithm. In addition, considering that the Cramer-Rao Lower Bound (CRLB) is the lowest achievable variance on an unbiased estimate, we evaluate the performance of the improved method and the classical method by calculating the CRLB of step-frequency-continuous-wave (SFCW) GPR for the first time. We find that the CRLB of the mid-point position generated by the improved method is lower than that of the classical method, which means that the measurement accuracy of the improved method has a higher theoretical limitation.
- 13 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (5) , 5986-5993
BiSTAC: A Class of Bipedal Soft Terrestrial–Aerial Bicopters
This letter presents the design, modeling, and motion control of BiSTAC, a novel hybrid terrestrial–aerial vehicle. BiSTAC features an innovative configuration that integrates a bicopter propeller system with a flexible bipedal locomotion mechanism, thereby enabling both bicopter flight and bipedal walking. Compared with other configurations of hybrid terrestrial–aerial vehicles, BiSTAC achieves functional reuse of its actuation system: the same set of actuators simultaneously supports both aerial flight and terrestrial walking, thereby improving the utilization efficiency of the locomotion mechanism while significantly simplifying the overall structural design. The dynamic model of BiSTAC is established, and both an aerial mode controller and a terrestrial controller are designed and implemented. Real-world experiments were conducted on the physical prototype, including flight performance experiments, terrestrial walking experiments, and bimodal locomotion experiments. The results are presented to validate the feasibility of the structural design of BiSTAC and demonstrate the effectiveness of the proposed controllers.
- 13 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (5) , 5986-5993
BiSTAC: A Class of Bipedal Soft Terrestrial–Aerial Bicopters
This letter presents the design, modeling, and motion control of BiSTAC, a novel hybrid terrestrial–aerial vehicle. BiSTAC features an innovative configuration that integrates a bicopter propeller system with a flexible bipedal locomotion mechanism, thereby enabling both bicopter flight and bipedal walking. Compared with other configurations of hybrid terrestrial–aerial vehicles, BiSTAC achieves functional reuse of its actuation system: the same set of actuators simultaneously supports both aerial flight and terrestrial walking, thereby improving the utilization efficiency of the locomotion mechanism while significantly simplifying the overall structural design. The dynamic model of BiSTAC is established, and both an aerial mode controller and a terrestrial controller are designed and implemented. Real-world experiments were conducted on the physical prototype, including flight performance experiments, terrestrial walking experiments, and bimodal locomotion experiments. The results are presented to validate the feasibility of the structural design of BiSTAC and demonstrate the effectiveness of the proposed controllers.
- 13 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (5) , 7359-7368
FRDP: A Micro Free-Flying Robot With Dual-Vector Propulsion in Space Station
This article details the design, modeling, and control of the FRDP, a novel free-flying robot with an innovative dual-vector propulsion structure for space station. Compared with the existing free-flying robots, FRDP achieves a significant reduction in weight and size by decreasing the redundancy of the propulsion module, while maintaining stronger mobility when carrying more sensing and computing modules. A new control allocation method for this dual-vectored propulsion structure is presented, enabling the generation of thrusts and torques in six degrees of freedom (DOFs) using four actuators. To adapt to various mission requirements, FRDP features both energy-saving mode and performance mode. The dynamic modeling and controller design for both modes are described, and the maneuvering performance and energy efficiency of the two modes are analyzed and compared. Simulation and real-world experimental results fully validate the effectiveness of the designed dual-vector propulsion structure and dual-modal controller, demonstrating FRDP’s potential for task execution in space station environments.
- 13 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (5) , 7359-7368
FRDP: A Micro Free-Flying Robot With Dual-Vector Propulsion in Space Station
This article details the design, modeling, and control of the FRDP, a novel free-flying robot with an innovative dual-vector propulsion structure for space station. Compared with the existing free-flying robots, FRDP achieves a significant reduction in weight and size by decreasing the redundancy of the propulsion module, while maintaining stronger mobility when carrying more sensing and computing modules. A new control allocation method for this dual-vectored propulsion structure is presented, enabling the generation of thrusts and torques in six degrees of freedom (DOFs) using four actuators. To adapt to various mission requirements, FRDP features both energy-saving mode and performance mode. The dynamic modeling and controller design for both modes are described, and the maneuvering performance and energy efficiency of the two modes are analyzed and compared. Simulation and real-world experimental results fully validate the effectiveness of the designed dual-vector propulsion structure and dual-modal controller, demonstrating FRDP’s potential for task execution in space station environments.
- 15 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (3) , 3062-3072
FAQts: A Class of Fully Actuated Quadrotor Based on Twin Servos
This article aims to design a class of fully actuated quadrotor based on twin servos (FAQts), utilizing a diagonal-rotor-synchronous-tilting configuration. With only two servos and four rotors, the system achieves independent control of both forces and torques, enabling six-degree-of-freedom fully actuated control. Compared with previous fully actuated autonomous aerial vehicles, FAQts offer higher hovering energy efficiency, reduces the load from additional actuators, and features a simpler and more stable mechanical structure. Leveraging advanced control methodologies and accounting for external disturbances, this study develops a robust high-order fully actuated controller featuring decoupled force and torque control, followed by comprehensive control synthesis. Experimental results demonstrate the performance of FAQts’s fully actuated controller in both position and attitude tracking. Furthermore, its stability maintenance under wind disturbances validates the effectiveness and superiority of the proposed mechanical design and robust high-order fully actuated controller.
- 15 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (3) , 3062-3072
FAQts: A Class of Fully Actuated Quadrotor Based on Twin Servos
This article aims to design a class of fully actuated quadrotor based on twin servos (FAQts), utilizing a diagonal-rotor-synchronous-tilting configuration. With only two servos and four rotors, the system achieves independent control of both forces and torques, enabling six-degree-of-freedom fully actuated control. Compared with previous fully actuated autonomous aerial vehicles, FAQts offer higher hovering energy efficiency, reduces the load from additional actuators, and features a simpler and more stable mechanical structure. Leveraging advanced control methodologies and accounting for external disturbances, this study develops a robust high-order fully actuated controller featuring decoupled force and torque control, followed by comprehensive control synthesis. Experimental results demonstrate the performance of FAQts’s fully actuated controller in both position and attitude tracking. Furthermore, its stability maintenance under wind disturbances validates the effectiveness and superiority of the proposed mechanical design and robust high-order fully actuated controller.
- 4 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (1) , 999-1009
TactV: A Class of Hybrid Terrestrial/Aerial Coaxial Tilt-Rotor Vehicles
This article aims to design a novel hybrid terrestrial/aerial vehicle, Terrestrial/aerial coaxial tilt-rotor Vehicles (TactV), featuring the aerial design of a tiltable coaxial dual-rotor as well as the terrestrial design based on a spherical cage structure, which enables centroid tilting. Compared to previous hybrid terrestrial/aerial vehicles, TactV demonstrates superior terrain traversal and endurance under the same load. The dynamics model of TactV is developed, based on which the corresponding aerial and terrestrial controllers are designed to ensure agile locomotion in each mode. Besides, by further analyzing the terrestrial mode of TactV, we propose energy-saving and high-mobility modes to enhance its terrestrial endurance. Finally, both aerial and terrestrial experiments are conducted to evaluate and confirm the exceptional performance of the locomotion capabilities and control strategies of TactV.
- 4 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 31 (1) , 999-1009
TactV: A Class of Hybrid Terrestrial/Aerial Coaxial Tilt-Rotor Vehicles
This article aims to design a novel hybrid terrestrial/aerial vehicle, Terrestrial/aerial coaxial tilt-rotor Vehicles (TactV), featuring the aerial design of a tiltable coaxial dual-rotor as well as the terrestrial design based on a spherical cage structure, which enables centroid tilting. Compared to previous hybrid terrestrial/aerial vehicles, TactV demonstrates superior terrain traversal and endurance under the same load. The dynamics model of TactV is developed, based on which the corresponding aerial and terrestrial controllers are designed to ensure agile locomotion in each mode. Besides, by further analyzing the terrestrial mode of TactV, we propose energy-saving and high-mobility modes to enhance its terrestrial endurance. Finally, both aerial and terrestrial experiments are conducted to evaluate and confirm the exceptional performance of the locomotion capabilities and control strategies of TactV.