Adjoumani Rodrigue Kouakou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Adjoumani Rodrigue Kouakou has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Ahissan Donatien Ehouman
Laboratoire de Thermodynamique et Physico-Chimie du Milieu, UFR SFA, Université Nangui Abrogoua, 02 BP 801 Abidjan 02, Côte-d’Ivoire
4 shared publications Ahissan Donatien Ehouman
Laboratoire de Thermodynamique et de Physico-Chimie du Milieu (LTPCM), UFR Sciences Fondamentales Appliquées, Université Nangui Abrogoua, 02 BP 801 Abidjan 02, Côte d’Ivoire
3 shared publicationsMarc Cyril Kouadio
Laboratoire de Biomasse Energie, Institut de Recherche sur les Energies Nouvelles, Université Nangui Abrogoua, B.P. 801 Abidjan 02, Côte d’Ivoire
3 shared publicationsBenjamin Yao
Centre d’Excellence Africain Pour la Valorisation des Déchets en Produits À Haute Valeur Ajoutée (CEA-VALOPRO), Institut National Polytechnique Félix Houphouët-Boigny (INP-HB), BP 1093, Yamoussoukro, Côte d’Ivoire
2 shared publications- Kopoin Adouby
Laboratoire Des Procédés Industriels de Synthèse de L'environnement et Des Energies Nouvelles Institut National Polytechniques Félix Houphouët Boigny Yamoussoukro Côte d'Ivoire
2 shared publications - Kouadio Marc Cyril
Laboratoire de Biomasse Energie, Institut de recherche sur les énergies nouvelles, université Nangui Abrogoua, Abidjan, Côte d’Ivoire
2 shared publications
Latest Publications
- Open Access
- 6 June 2025
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 41 (3) , 816-824
Anaerobic Valorisation of Kplala (Corchorus olitorius) Residues through Co-digestion with Leftover Food for Enhanced Biogas Generation
The organic-rich waste from Abidjan District has high methane and carbon dioxide emission potential, posing environmental risks. This study aims to assess the impact of incorporating kplala, a leafy biomass, on the biogas yield and methane content derived from food waste. Batch experiments were conducted under mesophilic conditions (37 °C), testing various mixing ratios of food waste and kplala. This approach achieved a specific biomethane yield of 327.57 ± 4 mL/gVS, corresponding to an annual electricity generation with a maximum potential of 23 megawatts. This finding is likely due to a more balanced nutrient profile and increased biodegradability of the co-substrate mixture. Furthermore, the combined treatment of these organic wastes presents a promising and eco-friendly strategy for urban waste management, while simultaneously supporting renewable energy generation. These outcomes highlight the potential for developing tailored anaerobic digestion solutions suitable for the Ivorian context.
- 6 June 2025
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 41 (3) , 816-824
Open AccessAnaerobic Valorisation of Kplala (Corchorus olitorius) Residues through Co-digestion with Leftover Food for Enhanced Biogas Generation
The organic-rich waste from Abidjan District has high methane and carbon dioxide emission potential, posing environmental risks. This study aims to assess the impact of incorporating kplala, a leafy biomass, on the biogas yield and methane content derived from food waste. Batch experiments were conducted under mesophilic conditions (37 °C), testing various mixing ratios of food waste and kplala. This approach achieved a specific biomethane yield of 327.57 ± 4 mL/gVS, corresponding to an annual electricity generation with a maximum potential of 23 megawatts. This finding is likely due to a more balanced nutrient profile and increased biodegradability of the co-substrate mixture. Furthermore, the combined treatment of these organic wastes presents a promising and eco-friendly strategy for urban waste management, while simultaneously supporting renewable energy generation. These outcomes highlight the potential for developing tailored anaerobic digestion solutions suitable for the Ivorian context.
- Open Access
- 14 February 2025
- Published by Earthline Publishers in Earthline Journal of Chemical Sciences
- Vol. 12 (2) , 137-153
Optimization of the manure/water ratio for maximum biogas production: Case of the FONSTI-CRDI digester in the East of Côte d’Ivoire
Effective waste management is crucial in addressing global environmental challenges. This study focuses on optimizing biogas production through anaerobic digestion of poultry manure, which is a significant agricultural waste in Côte d’Ivoire. The aim is to identify the optimal manure-to-water ratio to maximize biogas output using a FONSTI-CRDI digester with a capacity of 20 m³. The study was conducted at the Brin Foundation poultry farm in Côte d’Ivoire. Three manure-to-water ratios (1:3, 1:2, and 1:1) were tested over 15-day cycles. A range of laboratory and field equipment, including pH meters and biogas analyzers, was employed to monitor digestion conditions and measure biogas production. Physicochemical properties of the manure, such as pH, total solids, and the carbon-to-nitrogen ratio, were also analyzed to understand their impact on biogas yield. The 1:3 ratio yielded an average biogas production of 4.1 m³/day, with a methane content of 43%. The 1:2 ratio showed an improvement, achieving 5.3 m³/day with 51% methane. The 1:1 ratio produced the highest biogas output at 6.23 m³/day and 58% methane. However, operational challenges like digester blockages were observed at the 1:1 ratio. The digestate quality improved with lower water content, emitting less odor. The 1:2 manure-to-water ratio was determined to be the most effective for sustained biogas production, balancing high output and operational stability. This configuration supports renewable energy goals and sustainable agricultural practices, offering an efficient solution for managing poultry manure. Further research on co-substrates could enhance biogas yields and optimize the methanization process.
- 14 February 2025
- Published by Earthline Publishers in Earthline Journal of Chemical Sciences
- Vol. 12 (2) , 137-153
Open AccessOptimization of the manure/water ratio for maximum biogas production: Case of the FONSTI-CRDI digester in the East of Côte d’Ivoire
Effective waste management is crucial in addressing global environmental challenges. This study focuses on optimizing biogas production through anaerobic digestion of poultry manure, which is a significant agricultural waste in Côte d’Ivoire. The aim is to identify the optimal manure-to-water ratio to maximize biogas output using a FONSTI-CRDI digester with a capacity of 20 m³. The study was conducted at the Brin Foundation poultry farm in Côte d’Ivoire. Three manure-to-water ratios (1:3, 1:2, and 1:1) were tested over 15-day cycles. A range of laboratory and field equipment, including pH meters and biogas analyzers, was employed to monitor digestion conditions and measure biogas production. Physicochemical properties of the manure, such as pH, total solids, and the carbon-to-nitrogen ratio, were also analyzed to understand their impact on biogas yield. The 1:3 ratio yielded an average biogas production of 4.1 m³/day, with a methane content of 43%. The 1:2 ratio showed an improvement, achieving 5.3 m³/day with 51% methane. The 1:1 ratio produced the highest biogas output at 6.23 m³/day and 58% methane. However, operational challenges like digester blockages were observed at the 1:1 ratio. The digestate quality improved with lower water content, emitting less odor. The 1:2 manure-to-water ratio was determined to be the most effective for sustained biogas production, balancing high output and operational stability. This configuration supports renewable energy goals and sustainable agricultural practices, offering an efficient solution for managing poultry manure. Further research on co-substrates could enhance biogas yields and optimize the methanization process.
- Open Access
- 1 February 2025
- Published by Sciencedomain International in International Research Journal of Pure and Applied Chemistry
- Vol. 26 (2) , 112-121
Removal of Hydrogen Sulfide from Biogas by Adsorption on Activated Carbon Derived from Cashew Tree Branches
In the context of the energy transition, Côte d'Ivoire aims to increase the share of renewable energies in its energy mix, particularly by utilizing biogas. However, the presence of hydrogen sulfide (H₂S) in biogas poses technical and environmental challenges, necessitating its removal. This study explores the use of activated carbon derived from cashew tree branches as an adsorbent for biogas desulfurization. Cashew tree branches, an abundant byproduct of the cashew nut industry, were used as a precursor to produce activated carbon. The process involved chemical impregnation with different activating agents (H₃PO₄, NaOH, KOH), followed by carbonization at 500-550°C. The obtained activated carbon was characterized by determining its ash content, yield, pH at the point of zero charge, and iodine index. The results show that activation with KOH produced activated carbon with the highest adsorption capacity, achieving an iodine index of 923 mg/g and an average yield of 35.28%. The H₂S filtration test revealed an initial near-total removal of the gas (≈100%), with an efficiency maintained at 90.9% after 8 hours. The activated carbon did not reach its breakthrough time during the experiment, confirming its prolonged effectiveness. In conclusion, this study demonstrates that activated carbon derived from cashew tree branches is an effective adsorbent for biogas desulfurization. Its use could enable the local valorization of agricultural waste while contributing to the reduction of greenhouse gas emissions and the improvement of biogas quality.
- 1 February 2025
- Published by Sciencedomain International in International Research Journal of Pure and Applied Chemistry
- Vol. 26 (2) , 112-121
Open AccessRemoval of Hydrogen Sulfide from Biogas by Adsorption on Activated Carbon Derived from Cashew Tree Branches
In the context of the energy transition, Côte d'Ivoire aims to increase the share of renewable energies in its energy mix, particularly by utilizing biogas. However, the presence of hydrogen sulfide (H₂S) in biogas poses technical and environmental challenges, necessitating its removal. This study explores the use of activated carbon derived from cashew tree branches as an adsorbent for biogas desulfurization. Cashew tree branches, an abundant byproduct of the cashew nut industry, were used as a precursor to produce activated carbon. The process involved chemical impregnation with different activating agents (H₃PO₄, NaOH, KOH), followed by carbonization at 500-550°C. The obtained activated carbon was characterized by determining its ash content, yield, pH at the point of zero charge, and iodine index. The results show that activation with KOH produced activated carbon with the highest adsorption capacity, achieving an iodine index of 923 mg/g and an average yield of 35.28%. The H₂S filtration test revealed an initial near-total removal of the gas (≈100%), with an efficiency maintained at 90.9% after 8 hours. The activated carbon did not reach its breakthrough time during the experiment, confirming its prolonged effectiveness. In conclusion, this study demonstrates that activated carbon derived from cashew tree branches is an effective adsorbent for biogas desulfurization. Its use could enable the local valorization of agricultural waste while contributing to the reduction of greenhouse gas emissions and the improvement of biogas quality.
- Open Access
- 6 January 2025
- Published by Sciencedomain International in Chemical Science International Journal
- Vol. 34 (1) , 60-80
Analysis of Copper Corrosion by Biogas: Impact of Purification with Activated Carbon and Biochar Derived from Cocoa POSD Waste
In the context of reducing greenhouse gas emissions, this study evaluates copper corrosion in contact with biogas before and after purification using different carbons (biochar and activated carbon). Biogas, a renewable energy source, contains impurities such as hydrogen sulfide (H₂S), which accelerate the corrosion of metals, particularly copper. The materials used include carbons derived from cocoa pod waste, subjected to carbonization and chemical activation treatments. The results indicate that biogas purification significantly reduces copper corrosion, with mass loss decreasing from an average of 0.19 g to 0.03 g after 720 hours of exposure. Factorial designs were employed to assess the influence of various factors on the corrosion rate. Activated carbon was found to be 85% effective in removing H₂S, outperforming biochar, which achieved a 72% removal efficiency. In conclusion, using carbons derived from agricultural waste to purify biogas emerges as a promising solution for extending the lifespan of metallic infrastructures, with positive economic and environmental implications.
- 6 January 2025
- Published by Sciencedomain International in Chemical Science International Journal
- Vol. 34 (1) , 60-80
Open AccessAnalysis of Copper Corrosion by Biogas: Impact of Purification with Activated Carbon and Biochar Derived from Cocoa POSD Waste
In the context of reducing greenhouse gas emissions, this study evaluates copper corrosion in contact with biogas before and after purification using different carbons (biochar and activated carbon). Biogas, a renewable energy source, contains impurities such as hydrogen sulfide (H₂S), which accelerate the corrosion of metals, particularly copper. The materials used include carbons derived from cocoa pod waste, subjected to carbonization and chemical activation treatments. The results indicate that biogas purification significantly reduces copper corrosion, with mass loss decreasing from an average of 0.19 g to 0.03 g after 720 hours of exposure. Factorial designs were employed to assess the influence of various factors on the corrosion rate. Activated carbon was found to be 85% effective in removing H₂S, outperforming biochar, which achieved a 72% removal efficiency. In conclusion, using carbons derived from agricultural waste to purify biogas emerges as a promising solution for extending the lifespan of metallic infrastructures, with positive economic and environmental implications.
- Open Access
- 27 June 2024
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 40 (3) , 666-672
Mitigating Corrosion in Activated Carbon Purified Biogas: A Case Study of Copper and Aluminum Metals
The objective of this study is to investigate the potential reduction in corrosion of aluminum and copper metals when exposed to biogas purified by activated carbon derived from cashew branches. Both aluminum and copper metals were subjected to raw and purified biogas, and their corrosion rates were analyzed using the gravimetric method. The results revealed that the corrosion rate of both metals increased over time when exposed to unfiltered biogas. However, a notable reduction in corrosion rate was observed when the metals were exposed to biogas filtered with activated carbon. This suggests that activated carbon derived from cashew branches could effectively mitigate the corrosive effects of hydrogen sulfide in biogas. Additionally, the study found that aluminum exhibited greater resistance to corrosion compared to copper when exposed to filtered biogas. This research on green inhibitors introduces novel approaches, particularly in utilizing activated carbon from cashew branches for biogas purification, offering a promising strategy to mitigate its corrosive nature. Furthermore, the evaluation of this filtration method's efficacy in protecting aluminum and copper metals underscores its potential significance in corrosion prevention within biogas systems.
- 27 June 2024
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 40 (3) , 666-672
Open AccessMitigating Corrosion in Activated Carbon Purified Biogas: A Case Study of Copper and Aluminum Metals
The objective of this study is to investigate the potential reduction in corrosion of aluminum and copper metals when exposed to biogas purified by activated carbon derived from cashew branches. Both aluminum and copper metals were subjected to raw and purified biogas, and their corrosion rates were analyzed using the gravimetric method. The results revealed that the corrosion rate of both metals increased over time when exposed to unfiltered biogas. However, a notable reduction in corrosion rate was observed when the metals were exposed to biogas filtered with activated carbon. This suggests that activated carbon derived from cashew branches could effectively mitigate the corrosive effects of hydrogen sulfide in biogas. Additionally, the study found that aluminum exhibited greater resistance to corrosion compared to copper when exposed to filtered biogas. This research on green inhibitors introduces novel approaches, particularly in utilizing activated carbon from cashew branches for biogas purification, offering a promising strategy to mitigate its corrosive nature. Furthermore, the evaluation of this filtration method's efficacy in protecting aluminum and copper metals underscores its potential significance in corrosion prevention within biogas systems.
- Open Access
- 8 December 2023
- Published by Earthline Publishers in Earthline Journal of Chemical Sciences
- Vol. 11 (1) , 105-119
Biogas Production from Plantain and Yam Peels: Modelling using Response Surface Methodology
The world’s growing demand for energy and our concern to preserve the environment have prompted research into alternative sources of energy. Renewable energy from biomass is one such opportunity. The aim of this study is to model the production of biogas from the anaerobic digestion of plantain and yam peelings and cattle dung. A characterisation of these residues showed their good suitability for methanisation with good moisture contents (˃70%), high volatile solids contents (˃75%) and C/N ratios of between 20 and 30. In addition, methanisation trials under mesophilic conditions following a mixing plan generated quantities of biogas ranging from 128 to 565 mL with CH4 contents of between 54.03 and 72.98%. The digester made up of 1/6 plantain peels + 2/3 yam peels + 1/6 cattle dung gave the best biogas yield with 565 mL for 67.52% CH4. The model established from these results is highly significant with an F value (1268.01) having a probability significantly lower than 0.05. In addition to the coefficients R2 (0.9994) and R2 (0.9986) which adjust are very close to unity, there is a good correlation between the experimental results and those predicted. This prediction model is therefore reliable for explaining biogas production. However, further study of the kinetics of anaerobic digestion and biogas treatment remains important.
- 8 December 2023
- Published by Earthline Publishers in Earthline Journal of Chemical Sciences
- Vol. 11 (1) , 105-119
Open AccessBiogas Production from Plantain and Yam Peels: Modelling using Response Surface Methodology
The world’s growing demand for energy and our concern to preserve the environment have prompted research into alternative sources of energy. Renewable energy from biomass is one such opportunity. The aim of this study is to model the production of biogas from the anaerobic digestion of plantain and yam peelings and cattle dung. A characterisation of these residues showed their good suitability for methanisation with good moisture contents (˃70%), high volatile solids contents (˃75%) and C/N ratios of between 20 and 30. In addition, methanisation trials under mesophilic conditions following a mixing plan generated quantities of biogas ranging from 128 to 565 mL with CH4 contents of between 54.03 and 72.98%. The digester made up of 1/6 plantain peels + 2/3 yam peels + 1/6 cattle dung gave the best biogas yield with 565 mL for 67.52% CH4. The model established from these results is highly significant with an F value (1268.01) having a probability significantly lower than 0.05. In addition to the coefficients R2 (0.9994) and R2 (0.9986) which adjust are very close to unity, there is a good correlation between the experimental results and those predicted. This prediction model is therefore reliable for explaining biogas production. However, further study of the kinetics of anaerobic digestion and biogas treatment remains important.
- Open Access
- 3 September 2023
- Published by African Journals Online (AJOL) in Journal of Applied Sciences and Environmental Management
- Vol. 27 (8) , 1627-1632
Evaluation of Metal Contamination of Sediments around an Industrial Gold Mine in Côte d’Ivoire: The Example of Arsenic
The Tongon gold mine produces millions of tons of waste rock and tailings which are stored in dumps around the mine. This mine waste is contaminated with arsenic. Arsenic has acutely toxic effects on aquatic life within polluted areas. The potential for contamination of the area’s aquatic environment is apparent. Therefore the objective of this paper was to evaluate the arsenic contamination of the sediments around the industrial gold mine in Côte d'Ivoire using inductively coupled plasma mass spectroscopy (NexION 2000 ICP-MS, USA) after aqua regia acid digestion. In addition, the metal contamination indices were used to evaluate the degree of arsenic contamination in the sediments. The obtained results indicated that the sediments in the industrial area of the Tongon gold mine have high arsenic concentrations in the proximity of pits and dumps. The geoaccumulation index (-0.09 < Igeo < 2.20) and the pollution load index (0.93) revealed that the sediment is moderately contaminated with arsenic. These findings suggest an ecological risk and therefore the need for environmental monitoring, supported by the elaboration of an effective remedial action strategy to minimize local pollution and contamination.
- 3 September 2023
- Published by African Journals Online (AJOL) in Journal of Applied Sciences and Environmental Management
- Vol. 27 (8) , 1627-1632
Open AccessEvaluation of Metal Contamination of Sediments around an Industrial Gold Mine in Côte d’Ivoire: The Example of Arsenic
The Tongon gold mine produces millions of tons of waste rock and tailings which are stored in dumps around the mine. This mine waste is contaminated with arsenic. Arsenic has acutely toxic effects on aquatic life within polluted areas. The potential for contamination of the area’s aquatic environment is apparent. Therefore the objective of this paper was to evaluate the arsenic contamination of the sediments around the industrial gold mine in Côte d'Ivoire using inductively coupled plasma mass spectroscopy (NexION 2000 ICP-MS, USA) after aqua regia acid digestion. In addition, the metal contamination indices were used to evaluate the degree of arsenic contamination in the sediments. The obtained results indicated that the sediments in the industrial area of the Tongon gold mine have high arsenic concentrations in the proximity of pits and dumps. The geoaccumulation index (-0.09 < Igeo < 2.20) and the pollution load index (0.93) revealed that the sediment is moderately contaminated with arsenic. These findings suggest an ecological risk and therefore the need for environmental monitoring, supported by the elaboration of an effective remedial action strategy to minimize local pollution and contamination.
- Open Access
- 6 June 2022
- Published by Elsevier in Scientific African
- Vol. 16
Coupling anaerobic digestion process and electrocoagulation using iron and aluminium electrodes for slaughterhouse wastewater treatment
- 6 June 2022
- Published by Elsevier in Scientific African
- Vol. 16
Open AccessCoupling anaerobic digestion process and electrocoagulation using iron and aluminium electrodes for slaughterhouse wastewater treatment
- Open Access
- 30 August 2021
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 37 (4) , 805-812
Study of the Stability and Chemical Reactivity of a Series of Tetrazole Pyrimidine Hybrids by the Density Functional Theory Method (DFT)
Our theoretical study of stability and reactivity was carried out on six (06) molecules of a series of pyrimidine tetrazole hybrids (PTH) substituted with H, F, Cl, Br, OCH3 and CH3 atoms and groups of atoms using the density function theory (DFT). Analysis of the thermodynamic formation quantities confirmed the formation and existence of the series of molecules studied. Quantum chemical calculations at the B3LYP / 6-311G (d, p) level of theory determined molecular descriptors. Global reactivity descriptors were also determined and analyzed. Thus, the results showed that the compound PTH_1 is the most stable, and PTH_5 is the most reactive and nucleophilic. Similarly, the compound PTH_4 is the most electrophilic. The analysis of the local descriptors and the boundary molecular orbitals allowed us to identify the preferred atoms for electrophilic and nucleophilic attacks.
- 30 August 2021
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 37 (4) , 805-812
Open AccessStudy of the Stability and Chemical Reactivity of a Series of Tetrazole Pyrimidine Hybrids by the Density Functional Theory Method (DFT)
Our theoretical study of stability and reactivity was carried out on six (06) molecules of a series of pyrimidine tetrazole hybrids (PTH) substituted with H, F, Cl, Br, OCH3 and CH3 atoms and groups of atoms using the density function theory (DFT). Analysis of the thermodynamic formation quantities confirmed the formation and existence of the series of molecules studied. Quantum chemical calculations at the B3LYP / 6-311G (d, p) level of theory determined molecular descriptors. Global reactivity descriptors were also determined and analyzed. Thus, the results showed that the compound PTH_1 is the most stable, and PTH_5 is the most reactive and nucleophilic. Similarly, the compound PTH_4 is the most electrophilic. The analysis of the local descriptors and the boundary molecular orbitals allowed us to identify the preferred atoms for electrophilic and nucleophilic attacks.
- Open Access
- 2 July 2018
- Published by Ansari Education and Research Society in Journal of Ultra Chemistry
- Vol. 14 (4) , 142-145
Anaerobic bioconversion of food waste into energy: Case study of the food waste from Akouedo landfill, Côte d’Ivoire
Food waste collected in the Akouedo landfill, Côte d’Ivoire, is characterized for its potential for use as a feedstock for anaerobic digestion processes. The biogas yield of the food waste is evaluated using batch anaerobic digestion tests performed at 37°C. It is determined to be 2259 mL (282 mL/g VS) after 45 days of digestion. The results of this study indicate that the food waste from Akouedo landfill is a highly desirable substrate for anaerobic digesters with regards to its high biodegradability and biogas yield.
- 2 July 2018
- Published by Ansari Education and Research Society in Journal of Ultra Chemistry
- Vol. 14 (4) , 142-145
Open AccessAnaerobic bioconversion of food waste into energy: Case study of the food waste from Akouedo landfill, Côte d’Ivoire
Food waste collected in the Akouedo landfill, Côte d’Ivoire, is characterized for its potential for use as a feedstock for anaerobic digestion processes. The biogas yield of the food waste is evaluated using batch anaerobic digestion tests performed at 37°C. It is determined to be 2259 mL (282 mL/g VS) after 45 days of digestion. The results of this study indicate that the food waste from Akouedo landfill is a highly desirable substrate for anaerobic digesters with regards to its high biodegradability and biogas yield.