WZWenjing Zhang

Wenjing Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenjing Zhang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A 16-MHz Crystal Oscillator With 17.5- μ s Start-Up Time Under 104-ppm- Δ F Injection Using Automatic Phase-Error Correction

    by Zixuan Wang, Xin Wang, Ka-Meng Lei, Wenjing Zhang, Yunjin Yin, Tailong Xu, Zhikuang Cai, Yufeng Guo, Pui-In Mak

    Fast start-up crystal oscillators (XOs) based on energy injection with an auxiliary oscillator (AO) are efficacious in improving the energy consumption of duty-cycled the Internet of Things (IoT) devices. Nonetheless, the frequency mismatch ( ${\Delta } {F}$ ) between the injection frequency and the crystal’s resonance frequency restrains the injection efficiency and start-up improvement. This work presents an automatic phase-error correction (APEC) technique for automatically correcting the phase error incurred due to ${\Delta } {F}$ up to $10{^{4}}$ ppm and safeguarding the XO start-up performance. An inflection detector (ID) based on a dynamic comparator (DCMP) traces the crystal resonant signal’s peak points and selects the appropriate signals for injection. We fabricated the proposed fast start-up XO in a 40-nm CMOS process. It achieves a start-up time of $17.5~{\mu }$ s with a 16-MHz crystal and a 1.0-V ${V} {_{\text {DD}}}$ . Furthermore, the start-up time only varies by ±1.42% over a ${\Delta } {F}$ of ${\pm } 10{^{4}}$ ppm, and ±4.5% amid temperature variations (−40°C to $85~{^{\circ }}$ C), evincing the robustness of the proposed technique. The power consumption and phase noise in the steady state are $84~{\mu }$ W and −139 dBc/Hz at 1-kHz offset, respectively.


  • Open Access

    A Pipeline-TDC-Based CMOS Temperature Sensor with a 48 fJ·K2 Resolution FoM

    by Zhikuang Cai, Ze Wang, Wenjing Zhang, Xin Wang, Zixuan Wang

    An energy-efficient temperature sensor is important for temperature monitoring in Biomedical Internet-of-things (BIoT) applications. This article presents a time-domain temperature sensor with a pipeline time-to-digital converter (TDC). A programmable-gain time amplifier (PGTA) with high linearity and wide linear range is proposed to improve the resolution of the sensor and to reduce the chip area. The conversion time of the sensor is reduced by the fast TDC that only needs ~26 ns/conversion, which means the sensor is suitable for BIoT applications that commonly use duty cycling mode. Fabricated in a 40 nm standard CMOS technology, the sensor consumes 7.6 μA at a 0.6 V supply and achieves a resolution of 90 mK and a sensitivity of 0.62%/°C in a 1.3 μs conversion time. This translates into a resolution figure-of-merit of 48 fJ·K2. The sensor achieves an inaccuracy of 0.39 °C from −20 °C to 80 °C after two-point calibration. Duty cycling the sensor results in an even lower average power: ~18.6 nW at 10 conversions/s.