Valeriy N. Chikhman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Valeriy N. Chikhman has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Sergey D. Solnushkin
Pavlov Institute of Physiology of the Russian Academy of Sciences
11 shared publications - Valeria M. Bondarko
Pavlov Institute of Physiology, Russian Academy of Sciences, St. Petersburg, Russia
7 shared publications - Elvira I. Stolyarova
Институт физиологии им. И. П. Павлова РАН
2 shared publications - V.O. Molodtsov2 shared publications
- V.YU. Smirnov2 shared publications
D. V. Bondarko
I.P. Pavlov Institute of Physiology RAS
1 shared publication
Latest Publications
- 1 January 2025
- Published by Herzen State Pedagogical University of Russia
- Vol. 6 (4)
Implementation of computer technology at the Pavlov Institute of Physiology of the Russian Academy of Sciences
- 1 January 2025
- Published by Herzen State Pedagogical University of Russia
- Vol. 6 (4)
Implementation of computer technology at the Pavlov Institute of Physiology of the Russian Academy of Sciences
- 1 January 2025
- Published by Publishing house "Radiotekhnika" in Biomedical Radioelectronics
- p. 16-23
Accelerometric startle reflex detector
Problem statement. The innate reflex of startling in response to a short unexpected sound stimulus (acoustic startle reflex – ASR) is characteristic of both experimental animals and humans. Among the ASR parameters, the amplitude of muscle contraction in response to a strong stimulus and the degree of its suppression by a previous weak stimulus (prepulse) serve as markers of sensorimotor gating and are widely used in medical and experimental practice to identify mental disorders. At the same time, the high sensitivity of the recording equipment to the mechanical response, the accuracy of determining the ASR amplitude at various stimulus parameters, and a convenient service for real-time output and primary processing of results are critical characteristics of the method. Objective. To develop hardware and software for accurate quantitative automated measurements of ASR parameters in a behavioral experiment on rats. Results. The hardware module based on an accelerometric sensor and software for accurate quantitative measurement of parameters in the study of sensory-motor functions of rats at the Pavlov Institute of Physiology of the Russian Academy of Sciences have been developed. Practical significance. Hardware and software modules have been implemented to measure and register the parameters of the startling reflex with high sensitivity, and display them in real time on the screen during the experiment, which improves the quality of studying animal translational models at the preclinical research stage.
- 1 January 2025
- Published by Publishing house "Radiotekhnika" in Biomedical Radioelectronics
- p. 16-23
Accelerometric startle reflex detector
Problem statement. The innate reflex of startling in response to a short unexpected sound stimulus (acoustic startle reflex – ASR) is characteristic of both experimental animals and humans. Among the ASR parameters, the amplitude of muscle contraction in response to a strong stimulus and the degree of its suppression by a previous weak stimulus (prepulse) serve as markers of sensorimotor gating and are widely used in medical and experimental practice to identify mental disorders. At the same time, the high sensitivity of the recording equipment to the mechanical response, the accuracy of determining the ASR amplitude at various stimulus parameters, and a convenient service for real-time output and primary processing of results are critical characteristics of the method. Objective. To develop hardware and software for accurate quantitative automated measurements of ASR parameters in a behavioral experiment on rats. Results. The hardware module based on an accelerometric sensor and software for accurate quantitative measurement of parameters in the study of sensory-motor functions of rats at the Pavlov Institute of Physiology of the Russian Academy of Sciences have been developed. Practical significance. Hardware and software modules have been implemented to measure and register the parameters of the startling reflex with high sensitivity, and display them in real time on the screen during the experiment, which improves the quality of studying animal translational models at the preclinical research stage.
- Open Access
- 1 January 2025
- Published by Herzen State Pedagogical University of Russia
- Vol. 6 (1) , 41–65
Evolutionary and revolutionary development of computing devices
This article presents a historical overview of the development of computing technologies from ancient times to the present day. It documents key historical events, device names, dates of inventions and discoveries, as well as computational terms still in use today. The study identifies both evolutionary and revolutionary milestones that contributed to the advancement of computing devices. The review examines early mechanical innovations along with their creators — notable Russian and international mathematicians, mechanical engineers, and inventors — while also providing interesting biographical details. It highlights the contextual circumstances surrounding these inventions and their subsequent industrial production. The paper discusses fundamental discoveries in mathematics and electrophysics that enabled the progressive development of electromechanical and electronic computing systems. It analyzes the established generational classification of computers — from early electromechanical devices and vacuum tube machines to semiconductor-based systems and modern integrated circuit technologies — while also categorizing contemporary computers by their intended applications. Theoretical foundations underlying modern information technologies are systematically reviewed, with acknowledgment of the scientists, mathematicians, and engineers responsible for pivotal breakthroughs in computing and related disciplines. Finally, the paper outlines potential pathways for future advancements in computing technology. Приведен исторический обзор этапов создания средств вычислительной техники, начиная с древних времен и до наших дней. Приводятся исторические события, названия устройств, даты изобретений и открытий, термины, используемые в вычислительной технике до сегодняшнего дня. Выделяются эволюционные и революционные моменты и события, способствовавшие изобретению и созданию вычислительных устройств. Даются примеры первых механических разработок, а также имена их авторов, отечественных и зарубежных ученых — математиков, механиков, инженеров, интересные факты из их биографий. Упоминаются события, сопутствовавшие изобретениям и промышленному производству вычислительных устройств. Упомянуты важнейшие открытия и изобретения в области математики, электрофизики, эволюционное и революционное развитие электромеханических и электронных систем вычислительной техники, происходившее на их основе. Рассматривается существующая классификация электронных вычислительных машин по поколениям: от первых электромеханических устройств, ламповых и полупроводниковых машин до современных компьютеров на интегральных схемах. Приводится классификация современных компьютеров по назначению. Названы и рассмотрены теоретические разработки как основа создания современных информационных технологий. Приводятся имена ученых, математиков и инженеров, сделавших важнейшие открытия и изобретения в области вычислительных устройств и смежных наук. Обозначены пути дальнейшего возможного совершенствования вычислительных устройств.
- 1 January 2025
- Published by Herzen State Pedagogical University of Russia
- Vol. 6 (1) , 41–65
Open AccessEvolutionary and revolutionary development of computing devices
This article presents a historical overview of the development of computing technologies from ancient times to the present day. It documents key historical events, device names, dates of inventions and discoveries, as well as computational terms still in use today. The study identifies both evolutionary and revolutionary milestones that contributed to the advancement of computing devices. The review examines early mechanical innovations along with their creators — notable Russian and international mathematicians, mechanical engineers, and inventors — while also providing interesting biographical details. It highlights the contextual circumstances surrounding these inventions and their subsequent industrial production. The paper discusses fundamental discoveries in mathematics and electrophysics that enabled the progressive development of electromechanical and electronic computing systems. It analyzes the established generational classification of computers — from early electromechanical devices and vacuum tube machines to semiconductor-based systems and modern integrated circuit technologies — while also categorizing contemporary computers by their intended applications. Theoretical foundations underlying modern information technologies are systematically reviewed, with acknowledgment of the scientists, mathematicians, and engineers responsible for pivotal breakthroughs in computing and related disciplines. Finally, the paper outlines potential pathways for future advancements in computing technology. Приведен исторический обзор этапов создания средств вычислительной техники, начиная с древних времен и до наших дней. Приводятся исторические события, названия устройств, даты изобретений и открытий, термины, используемые в вычислительной технике до сегодняшнего дня. Выделяются эволюционные и революционные моменты и события, способствовавшие изобретению и созданию вычислительных устройств. Даются примеры первых механических разработок, а также имена их авторов, отечественных и зарубежных ученых — математиков, механиков, инженеров, интересные факты из их биографий. Упоминаются события, сопутствовавшие изобретениям и промышленному производству вычислительных устройств. Упомянуты важнейшие открытия и изобретения в области математики, электрофизики, эволюционное и революционное развитие электромеханических и электронных систем вычислительной техники, происходившее на их основе. Рассматривается существующая классификация электронных вычислительных машин по поколениям: от первых электромеханических устройств, ламповых и полупроводниковых машин до современных компьютеров на интегральных схемах. Приводится классификация современных компьютеров по назначению. Названы и рассмотрены теоретические разработки как основа создания современных информационных технологий. Приводятся имена ученых, математиков и инженеров, сделавших важнейшие открытия и изобретения в области вычислительных устройств и смежных наук. Обозначены пути дальнейшего возможного совершенствования вычислительных устройств.
- 5 November 2024
- Published by The Russian Academy of Sciences in Успехи физиологических наук
- Vol. 55 (3) , 3-21
Structural-functional organization of the visual system in ensuring goal-directed activity
A review of the results of half a century of research into the visual system as a hierarchical structure is presented: a multichannel, multilayer “pyramid”, each layer of which has a different spatiotemporal resolution, but together provides an invariant description of images for their classification, decision making, organization of eye movements and target search. An analysis of the multichannel organization of the human visual system was carried out, as the most effective and most economical. The “periscope and telescopic vision” systems, unique in their morphological and functional characteristics, are identified, providing gaze translation and recognition when searching and achieving a goal. Models of the pyramidal organization of the visual system have justified their existence by having an exceptional influence on the development of engineering solutions for the design of recognition systems operating in real time and the creation of artificial neural networks.
- 5 November 2024
- Published by The Russian Academy of Sciences in Успехи физиологических наук
- Vol. 55 (3) , 3-21
Structural-functional organization of the visual system in ensuring goal-directed activity
A review of the results of half a century of research into the visual system as a hierarchical structure is presented: a multichannel, multilayer “pyramid”, each layer of which has a different spatiotemporal resolution, but together provides an invariant description of images for their classification, decision making, organization of eye movements and target search. An analysis of the multichannel organization of the human visual system was carried out, as the most effective and most economical. The “periscope and telescopic vision” systems, unique in their morphological and functional characteristics, are identified, providing gaze translation and recognition when searching and achieving a goal. Models of the pyramidal organization of the visual system have justified their existence by having an exceptional influence on the development of engineering solutions for the design of recognition systems operating in real time and the creation of artificial neural networks.
- 1 October 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (10) , 696-702
Image curvature assessment in the presence of distractors
Subject of study. The mechanisms of visual perception of image curvature in the presence of additional images, referred to as distractors, were investigated. Aim of study. The aim was to describe and analyze the mechanisms of image curvature perception. Method. A series of psychophysical experiments were conducted, wherein images were analyzed, and the results were compared with those of prior studies on the perception of other visual stimuli. Main results. Curvatures for both real and interpolated images were estimated. Distortions (illusions) in the perception of image curvature in the presence of distractors were identified. Straight lines were perceived as curved, and the estimates for other stimuli were also erroneous. These illusions were more pronounced for interpolated images. The obtained data are consistent with the tilt illusion arising from the interaction between spatial-frequency channels. The observed illusions of image curvature may also be hypothetically explained by this interaction. However, a comparison with the perception of curvature of other images indicates ambiguity in the mechanisms for estimating curvature, as well as their dependence on the shape of the images and the surroundings. Practical significance. These findings can be applied in artificial neural networks for facial recognition and other images similar to those studied, as the initial processing of objects in such networks often involves filtering similar to that performed by the receptive fields of the visual cortex.
- 1 October 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (10) , 696-702
Image curvature assessment in the presence of distractors
Subject of study. The mechanisms of visual perception of image curvature in the presence of additional images, referred to as distractors, were investigated. Aim of study. The aim was to describe and analyze the mechanisms of image curvature perception. Method. A series of psychophysical experiments were conducted, wherein images were analyzed, and the results were compared with those of prior studies on the perception of other visual stimuli. Main results. Curvatures for both real and interpolated images were estimated. Distortions (illusions) in the perception of image curvature in the presence of distractors were identified. Straight lines were perceived as curved, and the estimates for other stimuli were also erroneous. These illusions were more pronounced for interpolated images. The obtained data are consistent with the tilt illusion arising from the interaction between spatial-frequency channels. The observed illusions of image curvature may also be hypothetically explained by this interaction. However, a comparison with the perception of curvature of other images indicates ambiguity in the mechanisms for estimating curvature, as well as their dependence on the shape of the images and the surroundings. Practical significance. These findings can be applied in artificial neural networks for facial recognition and other images similar to those studied, as the initial processing of objects in such networks often involves filtering similar to that performed by the receptive fields of the visual cortex.
- 28 March 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 90 (10) , 601-608
Shape deformation in optical illusions
Subject of study. We studied the mechanisms of optical illusions, in which the shapes of images were deformed. These were the checkerboard illusion, where straight lines appear curved as a result of white spots on black cells, and the Wundt–Hering illusion, in which straight lines seem curved when fan lines are superimposed on them. Aim of study. The goal was to describe and analyze the mechanisms generating these illusions, compare them, and test them in experiments. Methods. Psychophysical methods were used. A spatial frequency analysis of the images was carried out, and the obtained data were compared with the results of studying other illusions. Main results. Estimates of curvature in the checkerboard illusion were obtained for the first time. It was found that the checkerboard illusion intensified as the image size increased up to 2° and then weakened. The results of the experiments were consistent with the data from an optical irradiation phenomenon study, the neurophysiological correlates of which were represented by the receptive fields of neurons in the lateral geniculate nucleus. At the same time, the Wundt–Hering illusion was associated with the tilt illusion caused by the interaction between the spatial frequency channels formed by the receptive fields of cortical neurons. Analyses of other image-shape deformation illusions made it possible to attribute their mechanisms to one of the above types: the influence of optical irradiation or interaction between orientational spatial frequency channels. Practical significance. The irradiation phenomenon was described by the Naka–Rushton equation in the system of opponent receptive field neurons. The obtained results could be used in image processing and analysis, as well as in the development of adversarial artificial neural networks, which are analogs of opponent natural neural networks.
- 28 March 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 90 (10) , 601-608
Shape deformation in optical illusions
Subject of study. We studied the mechanisms of optical illusions, in which the shapes of images were deformed. These were the checkerboard illusion, where straight lines appear curved as a result of white spots on black cells, and the Wundt–Hering illusion, in which straight lines seem curved when fan lines are superimposed on them. Aim of study. The goal was to describe and analyze the mechanisms generating these illusions, compare them, and test them in experiments. Methods. Psychophysical methods were used. A spatial frequency analysis of the images was carried out, and the obtained data were compared with the results of studying other illusions. Main results. Estimates of curvature in the checkerboard illusion were obtained for the first time. It was found that the checkerboard illusion intensified as the image size increased up to 2° and then weakened. The results of the experiments were consistent with the data from an optical irradiation phenomenon study, the neurophysiological correlates of which were represented by the receptive fields of neurons in the lateral geniculate nucleus. At the same time, the Wundt–Hering illusion was associated with the tilt illusion caused by the interaction between the spatial frequency channels formed by the receptive fields of cortical neurons. Analyses of other image-shape deformation illusions made it possible to attribute their mechanisms to one of the above types: the influence of optical irradiation or interaction between orientational spatial frequency channels. Practical significance. The irradiation phenomenon was described by the Naka–Rushton equation in the system of opponent receptive field neurons. The obtained results could be used in image processing and analysis, as well as in the development of adversarial artificial neural networks, which are analogs of opponent natural neural networks.
- 1 January 2024
- Published by Publishing house "Radiotekhnika" in Biomedical Radioelectronics
- Vol. 1 (1)
Measurement of startle reflex
Observation and registration of the behavior of laboratory animals in response to a sound stimulus (Acoustic Startle Reflex - ASR) is one of the methods of experimental physiological research. The manifestation of this reflex is a startle - a rapid muscle twitching caused by a sudden and intense acoustic signal. Despite its relative simplicity, the magnitude of the startle response is a kind of behavioral tool that can be used to assess the physiological mechanisms of sensory motor reactions. The startle reflex parameters have been measured for a long time. One paper describes a device for measuring the acoustic startle response in mice that uses a spring-loaded arm, a strain gauge, and a polygraph. Individual startle responses were recorded using an ink recorder. Subsequently, they began to measure the reflex using electromyography. With the automation of scientific research, computerized devices are being developed. Known startle detection devices use accelerometers as sensors. These systems are characterized by excessive complexity and high cost. Purpose of our work was development of a simple device and problem-oriented software for the quantitative measurement of ASR based on the IBM PC with the Windows operating system. The floor of the experimental cage, in which the laboratory animal (white rats) is placed, is made in the form of a plastic plate mounted on four foam supports, which, in turn, are supported by four piezoelectric sensors (MakerHawk Analog Ceramic Piezo Vibration Sensor) placed in the bottom of the cage. An acoustic speaker is attached to the top of the cage to give stimulus signal. The board with electronic components is placed under the bottom of the cage. A relatively simple MD308 device has been developed and a program has been written to quantify ASR. The MD308 is based on the STM32L053C8T6 microcontroller, which provides sampling of analog signals from piezoelectric sensors into a digital code using an ADC, transferring the ADC output codes to a computer via the USB interface protocol. Simultaneously with the sampling of signals from the piezoelectric sensors, the audio signal is digitized for time reference in order to further process the recorded signals. The audio signal is formed by a computer using a standard sound card and connected to one of the ADC inputs through a high-pass filter with a signal shift to the middle of the range to convert a bipolar signal to an unipolar one. MD308 digitizes the voltage at the inputs from the piezo sensors and from the audio input in the sampling range from 0 to 2047, with a frequency of 1 kHz, i.e. on five channels, generates packets of 6 such measurements (30 values of 16 bits) and sends them to USB. This sampling frequency is quite sufficient, since the latent time of the startle reaction is about 50–300 ms. MD308 is a USB Custom HID device, data exchange with which is carried out using reports (HID_Reports). The device opens with the name "MD308". At startup, the microcontroller connects via USB to a computer and transfers the results of sampling signals from sensors and audio signal in portions of 60 bytes (ID_Report - 0x03): 6 samples in 5 channels of 2 bytes (channel 0 is the first sample, channel 1 is the first sample, ..., channel 4 is the first reading, then - channel 0 is the second reading, etc.). Since HID devices have a maximum burst rate of 1 kHz and a single burst size of maximum 64 bytes, grouping sample output values by 6 is done for the convenience of further monitoring data on the screen. The microcode for the microcontroller was developed in C++ in the IAR Embedded Workbench for ARM environment. The installation of SMD components (capacitors, resistors, etc.) on the MD308 circuit with the corresponding nominal values is made according to the approved circuit solutions. Schematic development was performed using Altium Designer CAD software. The software for the ASR reflex registration experiment based on the MD308 module is implemented in the Borland Delphi 7 environment, uses the JEDI VCL component library, which includes the TJvHidDeviceController component, which provides access to Custom HID devices. Software modules provide quantitative recording of discretized signals from four piezoelectric sensors, synthesis of an acoustic signal with specified parameters (amplitude, frequency, duration, number of sound stimuli), fixing the time of the beginning of the stimulus. Implemented dynamic display of signals on the display, their saving in the database. There are two blocks in the software - recording signals in the oscilloscope mode and displaying the preliminary processing of signals, which are stored in the database. The registration block allows you to configure the parameters of the experiment. To adjust the parameters of the sound stimulus, a group of visual components "sound" is provided. The experimenter sets the frequency of sound parcels, amplitude and duration. For testing, the buttons "start sound", "stop sound" are provided. The group of components "experiment" is intended for setting the parameters of the experiment - identification of the experiment, the number of sound bursts, the interval between sound bursts. The “start series” button starts the registration of signals and their display in real time. Upon completion of the series, the registration stops, the data can be saved in the database (button "save in the database"). The number displayed in the right corner of the "experience" group corresponds to the number of the sound message. The group of buttons at the bottom of the interface is designed to test the operation of piezoelectric sensors ("start", "stop"), set the signal display scale, and control the "sound" panel. The upper graphic field displays in real time the integrated signal of four piezoelectric sensors, the mark of the beginning of the sound stimulus in the form of a vertical lines (benchmarks). The bottom four fields display the signals...
- 1 January 2024
- Published by Publishing house "Radiotekhnika" in Biomedical Radioelectronics
- Vol. 1 (1)
Measurement of startle reflex
Observation and registration of the behavior of laboratory animals in response to a sound stimulus (Acoustic Startle Reflex - ASR) is one of the methods of experimental physiological research. The manifestation of this reflex is a startle - a rapid muscle twitching caused by a sudden and intense acoustic signal. Despite its relative simplicity, the magnitude of the startle response is a kind of behavioral tool that can be used to assess the physiological mechanisms of sensory motor reactions. The startle reflex parameters have been measured for a long time. One paper describes a device for measuring the acoustic startle response in mice that uses a spring-loaded arm, a strain gauge, and a polygraph. Individual startle responses were recorded using an ink recorder. Subsequently, they began to measure the reflex using electromyography. With the automation of scientific research, computerized devices are being developed. Known startle detection devices use accelerometers as sensors. These systems are characterized by excessive complexity and high cost. Purpose of our work was development of a simple device and problem-oriented software for the quantitative measurement of ASR based on the IBM PC with the Windows operating system. The floor of the experimental cage, in which the laboratory animal (white rats) is placed, is made in the form of a plastic plate mounted on four foam supports, which, in turn, are supported by four piezoelectric sensors (MakerHawk Analog Ceramic Piezo Vibration Sensor) placed in the bottom of the cage. An acoustic speaker is attached to the top of the cage to give stimulus signal. The board with electronic components is placed under the bottom of the cage. A relatively simple MD308 device has been developed and a program has been written to quantify ASR. The MD308 is based on the STM32L053C8T6 microcontroller, which provides sampling of analog signals from piezoelectric sensors into a digital code using an ADC, transferring the ADC output codes to a computer via the USB interface protocol. Simultaneously with the sampling of signals from the piezoelectric sensors, the audio signal is digitized for time reference in order to further process the recorded signals. The audio signal is formed by a computer using a standard sound card and connected to one of the ADC inputs through a high-pass filter with a signal shift to the middle of the range to convert a bipolar signal to an unipolar one. MD308 digitizes the voltage at the inputs from the piezo sensors and from the audio input in the sampling range from 0 to 2047, with a frequency of 1 kHz, i.e. on five channels, generates packets of 6 such measurements (30 values of 16 bits) and sends them to USB. This sampling frequency is quite sufficient, since the latent time of the startle reaction is about 50–300 ms. MD308 is a USB Custom HID device, data exchange with which is carried out using reports (HID_Reports). The device opens with the name "MD308". At startup, the microcontroller connects via USB to a computer and transfers the results of sampling signals from sensors and audio signal in portions of 60 bytes (ID_Report - 0x03): 6 samples in 5 channels of 2 bytes (channel 0 is the first sample, channel 1 is the first sample, ..., channel 4 is the first reading, then - channel 0 is the second reading, etc.). Since HID devices have a maximum burst rate of 1 kHz and a single burst size of maximum 64 bytes, grouping sample output values by 6 is done for the convenience of further monitoring data on the screen. The microcode for the microcontroller was developed in C++ in the IAR Embedded Workbench for ARM environment. The installation of SMD components (capacitors, resistors, etc.) on the MD308 circuit with the corresponding nominal values is made according to the approved circuit solutions. Schematic development was performed using Altium Designer CAD software. The software for the ASR reflex registration experiment based on the MD308 module is implemented in the Borland Delphi 7 environment, uses the JEDI VCL component library, which includes the TJvHidDeviceController component, which provides access to Custom HID devices. Software modules provide quantitative recording of discretized signals from four piezoelectric sensors, synthesis of an acoustic signal with specified parameters (amplitude, frequency, duration, number of sound stimuli), fixing the time of the beginning of the stimulus. Implemented dynamic display of signals on the display, their saving in the database. There are two blocks in the software - recording signals in the oscilloscope mode and displaying the preliminary processing of signals, which are stored in the database. The registration block allows you to configure the parameters of the experiment. To adjust the parameters of the sound stimulus, a group of visual components "sound" is provided. The experimenter sets the frequency of sound parcels, amplitude and duration. For testing, the buttons "start sound", "stop sound" are provided. The group of components "experiment" is intended for setting the parameters of the experiment - identification of the experiment, the number of sound bursts, the interval between sound bursts. The “start series” button starts the registration of signals and their display in real time. Upon completion of the series, the registration stops, the data can be saved in the database (button "save in the database"). The number displayed in the right corner of the "experience" group corresponds to the number of the sound message. The group of buttons at the bottom of the interface is designed to test the operation of piezoelectric sensors ("start", "stop"), set the signal display scale, and control the "sound" panel. The upper graphic field displays in real time the integrated signal of four piezoelectric sensors, the mark of the beginning of the sound stimulus in the form of a vertical lines (benchmarks). The bottom four fields display the signals...
- Open Access
- 27 October 2023
- Published by Moscow State University of Psychology and Education in Experimental Psychology (Russia)
- Vol. 16 (3) , 69-85
Visual Illusions and Perception of Classical Architecture
We carried out psychophysical experiments to study perception mechanisms of images that are elements of building projections in ancient and classical architecture. The curvature of isolated lines and lines superimposed on a fan picture (Wundt-Hering illusion), as well as the orientation of lines in the presence of distractors with varying inclination and separation (tilt illusion) were estimated. We used the methods of constant stimuli and the forced choice procedure. The experiments were carried out on three subjects with a large number of presentations of stimuli, which made it possible to evaluate the statistical significance of the obtained dependences. The values of distortions in the illusion of Wundt-Hering (WH) and in the tilt illusion were determined. It is shown that the curvature of single lines without fan lines is estimated adequately. The analysis of the results led to the conclusion that corrections of the orientation and curvature of elements in classical architecture compensate for the distortions of visual perception. At the same time, the curvature of some elements may be due to the aesthetics of perception.
- 27 October 2023
- Published by Moscow State University of Psychology and Education in Experimental Psychology (Russia)
- Vol. 16 (3) , 69-85
Open AccessVisual Illusions and Perception of Classical Architecture
We carried out psychophysical experiments to study perception mechanisms of images that are elements of building projections in ancient and classical architecture. The curvature of isolated lines and lines superimposed on a fan picture (Wundt-Hering illusion), as well as the orientation of lines in the presence of distractors with varying inclination and separation (tilt illusion) were estimated. We used the methods of constant stimuli and the forced choice procedure. The experiments were carried out on three subjects with a large number of presentations of stimuli, which made it possible to evaluate the statistical significance of the obtained dependences. The values of distortions in the illusion of Wundt-Hering (WH) and in the tilt illusion were determined. It is shown that the curvature of single lines without fan lines is estimated adequately. The analysis of the results led to the conclusion that corrections of the orientation and curvature of elements in classical architecture compensate for the distortions of visual perception. At the same time, the curvature of some elements may be due to the aesthetics of perception.
- 1 January 2023
- Published by Herzen State Pedagogical University of Russia
- Vol. 4 (3)
“Speech Pathologist’s Assistant”: Interactive software in teaching children with hearing and speech disorders
- 1 January 2023
- Published by Herzen State Pedagogical University of Russia
- Vol. 4 (3)
“Speech Pathologist’s Assistant”: Interactive software in teaching children with hearing and speech disorders
- Open Access
- 1 January 2023
- Published by Herzen State Pedagogical University of Russia
- Vol. 4 (2) , 213–224
A methodological approach to study the role of memory and attention on visual perception
Компьютерная реализация экспериментов по изучению зрительного восприятия обеспечивает большие возможности использования естественных и синтезированных изображений, а также сложного дизайна психофизических экспериментов. В работе представлены часто используемые психофизические методики по исследованию влияния на зрительное восприятие механизмов памяти и внимания, реализованные с использованием компьютерных технологий. Механизмы памяти изучали путем сравнения результатов ответов на последовательное и одновременное предъявления одних и тех же стимулов в задаче оценки кривизны реальных и интерполированных линий. При одновременном предъявлении в отличие от последовательного была выявлена иллюзия выпрямления интерполированных линий и более низкие пороги различения кривизны. Влияние механизма внимания оценивали путем сопоставления результатов выполнения одинарной и двойной задач. В двойной задаче от наблюдателей требовалось опознать как форму тестового объекта, так и форму дистрактора, расположенного на разном расстоянии от теста. Стимулы имели низкий контраст и короткое время предъявления. Предполагалось, что выполнение двойной задачи скажется на перераспределении внимания, что затруднит опознание теста. Однако достоверного ухудшения опознания тестового стимула в двойной задаче по сравнению с одинарной не наблюдалось. Достоверно уменьшилось только число неслучайных ошибок. Расстояния дистрактора до теста, на которых выявлено ухудшение распознавания, намного превосходили значения, полученные в подобных экспериментах, но с использованием других условий наблюдения. Влияние механизма внимания в обеих задачах проявилось как более сильное ухудшение опознания при использовании дистракторов, аналогичных по форме с тестами, но отличающихся ориентацией. Показано влияние методического подхода и дизайна эксперимента на получаемые результаты.
- 1 January 2023
- Published by Herzen State Pedagogical University of Russia
- Vol. 4 (2) , 213–224
Open AccessA methodological approach to study the role of memory and attention on visual perception
Компьютерная реализация экспериментов по изучению зрительного восприятия обеспечивает большие возможности использования естественных и синтезированных изображений, а также сложного дизайна психофизических экспериментов. В работе представлены часто используемые психофизические методики по исследованию влияния на зрительное восприятие механизмов памяти и внимания, реализованные с использованием компьютерных технологий. Механизмы памяти изучали путем сравнения результатов ответов на последовательное и одновременное предъявления одних и тех же стимулов в задаче оценки кривизны реальных и интерполированных линий. При одновременном предъявлении в отличие от последовательного была выявлена иллюзия выпрямления интерполированных линий и более низкие пороги различения кривизны. Влияние механизма внимания оценивали путем сопоставления результатов выполнения одинарной и двойной задач. В двойной задаче от наблюдателей требовалось опознать как форму тестового объекта, так и форму дистрактора, расположенного на разном расстоянии от теста. Стимулы имели низкий контраст и короткое время предъявления. Предполагалось, что выполнение двойной задачи скажется на перераспределении внимания, что затруднит опознание теста. Однако достоверного ухудшения опознания тестового стимула в двойной задаче по сравнению с одинарной не наблюдалось. Достоверно уменьшилось только число неслучайных ошибок. Расстояния дистрактора до теста, на которых выявлено ухудшение распознавания, намного превосходили значения, полученные в подобных экспериментах, но с использованием других условий наблюдения. Влияние механизма внимания в обеих задачах проявилось как более сильное ухудшение опознания при использовании дистракторов, аналогичных по форме с тестами, но отличающихся ориентацией. Показано влияние методического подхода и дизайна эксперимента на получаемые результаты.