Lucian Nicolae Pintilie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lucian Nicolae Pintilie has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Petre Dorel Teodosescu
Department of Electrical Machines and Drives, Technical University of Cluj-Napoca, 400489 Cluj-Napoca, Romania
7 shared publications - Sorin Ionuț Salcu
Department of Electrical Machines and Drives, Technical University of Cluj-Napoca, 400489 Cluj-Napoca, Romania
5 shared publications - Vasile Mihai Suciu
Department of Electrical Machines and Drives, Technical University of Cluj-Napoca, 400489 Cluj-Napoca, Romania
5 shared publications - Norbert Csaba Szekely
Department of Electrical Machines and Drives, Technical University of Cluj-Napoca, 400489 Cluj-Napoca, Romania
4 shared publications Vasile Mihai Suciu
Technical University of Cluj-Napoca,Faculty of Electrical Engineering,Department of Electrical Machines and Drives,Cluj-Napoca,Romania
3 shared publications- Alexandru Madalin Pacuraru
Department of Electrical Machines and Drives, Faculty of Electrical Engineering, Technical University of Cluj-Napoca, 400489 Cluj-Napoca, Romania
2 shared publications
Latest Publications
- Open Access
- 13 August 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (16) , 8919
Artificial Intelligence-Based Sensorless Control of Induction Motors with Dual-Field Orientation
This paper introduces a speed-sensorless dual-field-oriented control (DFOC) strategy for induction motors (IMs). DFOC combines the advantages or rotor- and stator-field orientation to significantly reduce the parameter sensitivity of the control regarding the generation of the converter control variable. A simplified structure is also proposed, using only two regulators for the flux and speed control, eliminating the two current regulators. Related to sensorless control, the classical adaptation mechanism within an MRAS (model reference adaptive system) observer is replaced with artificial intelligence (AI)-based approaches. Specifically, artificial neural networks (ANNs) and recurrent neural networks (RNNs) are employed for rotor speed estimation. They offer significant advantages in managing complex and nonlinear systems, providing enhanced flexibility and adaptability compared to traditional MRAS methods. The effectiveness of the proposed sensorless control scheme is validated through both simulation and real-time implementation. The paper focuses on the ANN and RNN architectures, as deep learning models, in terms of the reliability and accuracy of rotor speed estimation under various operating conditions.
- 13 August 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (16) , 8919
Open AccessArtificial Intelligence-Based Sensorless Control of Induction Motors with Dual-Field Orientation
This paper introduces a speed-sensorless dual-field-oriented control (DFOC) strategy for induction motors (IMs). DFOC combines the advantages or rotor- and stator-field orientation to significantly reduce the parameter sensitivity of the control regarding the generation of the converter control variable. A simplified structure is also proposed, using only two regulators for the flux and speed control, eliminating the two current regulators. Related to sensorless control, the classical adaptation mechanism within an MRAS (model reference adaptive system) observer is replaced with artificial intelligence (AI)-based approaches. Specifically, artificial neural networks (ANNs) and recurrent neural networks (RNNs) are employed for rotor speed estimation. They offer significant advantages in managing complex and nonlinear systems, providing enhanced flexibility and adaptability compared to traditional MRAS methods. The effectiveness of the proposed sensorless control scheme is validated through both simulation and real-time implementation. The paper focuses on the ANN and RNN architectures, as deep learning models, in terms of the reliability and accuracy of rotor speed estimation under various operating conditions.
- Open Access
- 18 July 2025
- Published by MDPI AG in Preprints.org
Artificial Intelligence-Based Sensorless Control of Induction Motor with Dual-Field-Orientation
This paper introduces a speed sensorless Dual Field-Oriented Control (DFOC) strategy for induction motors (IM). DFO combines the advantages or rotor-and stator-field orienta-tion to significantly reduce the parameter sensitivity of the control regarding the generation of the converter control variable. A simplified structure is also proposed, using only two regulators for the flux and speed control, eliminating the two current regulators. Related to sensorless control, the classical adaptation mechanism within the MRAS (Model Reference Adaptive System) observer has been replaced with artificial intelligence (AI)-based approaches. Specifically, artificial neural networks (ANN) and recurrent neural networks (RNN) are employed for rotor speed estimation. The effectiveness of the proposed sensor-less control scheme is validated through both simulation and real-time implementation. The results demonstrate that ANN- and RNN-based observers, as deep learning models, provide reliable and accurate rotor speed estimation under various operating conditions.
- 18 July 2025
- Published by MDPI AG in Preprints.org
Open AccessArtificial Intelligence-Based Sensorless Control of Induction Motor with Dual-Field-Orientation
This paper introduces a speed sensorless Dual Field-Oriented Control (DFOC) strategy for induction motors (IM). DFO combines the advantages or rotor-and stator-field orienta-tion to significantly reduce the parameter sensitivity of the control regarding the generation of the converter control variable. A simplified structure is also proposed, using only two regulators for the flux and speed control, eliminating the two current regulators. Related to sensorless control, the classical adaptation mechanism within the MRAS (Model Reference Adaptive System) observer has been replaced with artificial intelligence (AI)-based approaches. Specifically, artificial neural networks (ANN) and recurrent neural networks (RNN) are employed for rotor speed estimation. The effectiveness of the proposed sensor-less control scheme is validated through both simulation and real-time implementation. The results demonstrate that ANN- and RNN-based observers, as deep learning models, provide reliable and accurate rotor speed estimation under various operating conditions.
- Open Access
- 10 October 2023
- Published by MDPI AG in Electricity
- Vol. 4 (4) , 277-308
Energy Conversion Optimization Method in Nano-Grids Using Variable Supply Voltage Adjustment Strategy Based on a Novel Inverse Maximum Power Point Tracking Technique (iMPPT)
This paper introduces a novel power supply voltage adjustment strategy that can determine the optimum voltage value based on the amount of absorbed power. The novel automatic voltage adjustment technique was called inverse maximum power point tracking (iMPPT). The proposed control strategy consists of a modified maximum power point tracking (MPPT) algorithm (more precisely the P&O method). In this case, the modified MPPT technique establishes the minimum value of the input absorbed power of a consumer load served by a switched-mode power supply (SMPS). The iMPPT adjusts the input power by modifying the input voltage of the main power supply. The served loads are connected to the variable power supply via an interfacing power electronics converter that performs the automatic voltage regulation function (AVR). The optimal value of the input voltage level can be achieved when the input power of the automatic voltage regulation converter is at a minimum. In that case, the energy conversion efficiency ratio is at a maximum, and the overall losses related to the front-end power stage are at a minimum. The proposed technique can also be considered a Maximum Efficiency Tracking (MET) method. By performing the inverse operation of a maximum power point tracking algorithm on the input demanded power of a switched mode power supply (SMPS), the optimum input voltage level can be determined when the maximum energy conversion ratio (related to a given load level) is achieved. The novel proposed iMPPT method can improve the energy conversion ratio from 85% up to approximately 10% in the case of an output power level of 800 W served by a synchronous buck converter at the input voltage level of 350 V. The total amount of recovered power in this situation can be approximately 100 W.
- 10 October 2023
- Published by MDPI AG in Electricity
- Vol. 4 (4) , 277-308
Open AccessEnergy Conversion Optimization Method in Nano-Grids Using Variable Supply Voltage Adjustment Strategy Based on a Novel Inverse Maximum Power Point Tracking Technique (iMPPT)
This paper introduces a novel power supply voltage adjustment strategy that can determine the optimum voltage value based on the amount of absorbed power. The novel automatic voltage adjustment technique was called inverse maximum power point tracking (iMPPT). The proposed control strategy consists of a modified maximum power point tracking (MPPT) algorithm (more precisely the P&O method). In this case, the modified MPPT technique establishes the minimum value of the input absorbed power of a consumer load served by a switched-mode power supply (SMPS). The iMPPT adjusts the input power by modifying the input voltage of the main power supply. The served loads are connected to the variable power supply via an interfacing power electronics converter that performs the automatic voltage regulation function (AVR). The optimal value of the input voltage level can be achieved when the input power of the automatic voltage regulation converter is at a minimum. In that case, the energy conversion efficiency ratio is at a maximum, and the overall losses related to the front-end power stage are at a minimum. The proposed technique can also be considered a Maximum Efficiency Tracking (MET) method. By performing the inverse operation of a maximum power point tracking algorithm on the input demanded power of a switched mode power supply (SMPS), the optimum input voltage level can be determined when the maximum energy conversion ratio (related to a given load level) is achieved. The novel proposed iMPPT method can improve the energy conversion ratio from 85% up to approximately 10% in the case of an output power level of 800 W served by a synchronous buck converter at the input voltage level of 350 V. The total amount of recovered power in this situation can be approximately 100 W.
- 20 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 462-467
Implementation of a remote controlled photovoltaic nano-grid
This paper proposes a solution in the context of Home Energy Management Systems (HEMS) and a practical implementation of a remotely controlled nano-grid structure. The novelty of the subject consists in the improvements on the ease of access and control of the implied equipment, with issues of reconfiguration and integration of open-source software. The proposed configuration allows real-time control and monitoring of the devices and their parameters and the global grid electrical energy parameters for the produced and consumed power. This system also gives the possibility of power consumption monitoring, forecasting and prediction at specific preset period. The system can also monitor and record the average operating time, the average load level of the grid, and other details about the past or future behavior of the equipment plus different quality or statistic energy quality indicators such as energy transfer efficiency.
- 20 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 462-467
Implementation of a remote controlled photovoltaic nano-grid
This paper proposes a solution in the context of Home Energy Management Systems (HEMS) and a practical implementation of a remotely controlled nano-grid structure. The novelty of the subject consists in the improvements on the ease of access and control of the implied equipment, with issues of reconfiguration and integration of open-source software. The proposed configuration allows real-time control and monitoring of the devices and their parameters and the global grid electrical energy parameters for the produced and consumed power. This system also gives the possibility of power consumption monitoring, forecasting and prediction at specific preset period. The system can also monitor and record the average operating time, the average load level of the grid, and other details about the past or future behavior of the equipment plus different quality or statistic energy quality indicators such as energy transfer efficiency.
- 20 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 472-477
Analysis and Practical Implementation of an Independent Double Buck Interleaved Converter
This paper presents and analyzes the operation of a patented bidirectional dc-dc converter power stage topology, working in step-down (buck) mode. The structure of the proposed and analyzed step-down dc-dc converter is called “Independent Double Buck Interleaved Converter (IDbIC).’' The study of the investigated power stage structure was conducted both theoretical and experimental. Theoretical study stage includes the following objectives: presentation of the dc-dc converter power stage, development of a mathematical model for continuous conduction mode (CCM) of the IDbIC, and the implementation of a simulation and validation model for the results obtained in the mathematical - analytical model. Also, within the experimental study, a physical model of the proposed power stage converter was developed. On the same prototype, the functionality of the IDbIC converter structure was validated. Moreover, using the experimental prototype, the power stage efficiency of the proposed dc-dc converter, was determined at various levels of input voltage and output power.
- 20 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 472-477
Analysis and Practical Implementation of an Independent Double Buck Interleaved Converter
This paper presents and analyzes the operation of a patented bidirectional dc-dc converter power stage topology, working in step-down (buck) mode. The structure of the proposed and analyzed step-down dc-dc converter is called “Independent Double Buck Interleaved Converter (IDbIC).’' The study of the investigated power stage structure was conducted both theoretical and experimental. Theoretical study stage includes the following objectives: presentation of the dc-dc converter power stage, development of a mathematical model for continuous conduction mode (CCM) of the IDbIC, and the implementation of a simulation and validation model for the results obtained in the mathematical - analytical model. Also, within the experimental study, a physical model of the proposed power stage converter was developed. On the same prototype, the functionality of the IDbIC converter structure was validated. Moreover, using the experimental prototype, the power stage efficiency of the proposed dc-dc converter, was determined at various levels of input voltage and output power.
- 17 August 2022
- Published by Springer Nature
- p. 671-681
Analysis of an Independent Double-Boost Interleaved Converter Operating as Power Optimizer in a PV Application
- 17 August 2022
- Published by Springer Nature
- p. 671-681
Analysis of an Independent Double-Boost Interleaved Converter Operating as Power Optimizer in a PV Application
- Open Access
- 18 July 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (14) , 7209
Power Factor Correction Application Based on Independent Double-Boost Interleaved Converter (IDBIC)
In this paper, a Power Factor Correction (PFC) application, based on the novel power stage topology named Independent Double-Boost Interleaved Converter (IDBIC), has been analyzed. The novelty of the proposed PFC rectifier is based on the sum of capabilities, such as supplying three independent output voltage levels with interleaved operation at the input and high voltage gain. The hardware used within this application consists of an AC input L-C-L filter, a single-phase bridge rectifier, the IDBIC power stage, output capacitors group and a group of variable high-power rheostats (resistors) group as DC load. The main purpose of the carried study was to highlight the advantages and disadvantages of the novel power stage topology in the context of a green and modern AC to DC conversion solution. Nowadays, a high level of the efficiency and power factor have become a mandatory feature for the AC to DC conversion solutions to satisfy the international electrical standards. Thus, considering the modern electrical standards and recommendations, the current study tries to better depict the working steps and principles of the modern power stage topology within an AC to DC conversion application. The behavior of the considered power stage described in different detailed working steps (such as the Discontinuous Conduction Mode and Continuous Conduction Mode) may help understand how the energy conversions process of AC to DC becomes more efficient. The high output voltage gain of the considered power stage is the key feature in the Power Factor Correction process. With such a feature, the AC to DC conversion solution/application can also operate at lower input AC voltages (such as 90 [V] and 110 [V]). The proposed solution can be successfully used in the electric vehicle (automotive field) and high-power electrical traction (e.g., trains, high power electrical machines and drives). The same solution can also be used successfully in fast battery charging applications and chemical electrolysis processes.
- 18 July 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (14) , 7209
Open AccessPower Factor Correction Application Based on Independent Double-Boost Interleaved Converter (IDBIC)
In this paper, a Power Factor Correction (PFC) application, based on the novel power stage topology named Independent Double-Boost Interleaved Converter (IDBIC), has been analyzed. The novelty of the proposed PFC rectifier is based on the sum of capabilities, such as supplying three independent output voltage levels with interleaved operation at the input and high voltage gain. The hardware used within this application consists of an AC input L-C-L filter, a single-phase bridge rectifier, the IDBIC power stage, output capacitors group and a group of variable high-power rheostats (resistors) group as DC load. The main purpose of the carried study was to highlight the advantages and disadvantages of the novel power stage topology in the context of a green and modern AC to DC conversion solution. Nowadays, a high level of the efficiency and power factor have become a mandatory feature for the AC to DC conversion solutions to satisfy the international electrical standards. Thus, considering the modern electrical standards and recommendations, the current study tries to better depict the working steps and principles of the modern power stage topology within an AC to DC conversion application. The behavior of the considered power stage described in different detailed working steps (such as the Discontinuous Conduction Mode and Continuous Conduction Mode) may help understand how the energy conversions process of AC to DC becomes more efficient. The high output voltage gain of the considered power stage is the key feature in the Power Factor Correction process. With such a feature, the AC to DC conversion solution/application can also operate at lower input AC voltages (such as 90 [V] and 110 [V]). The proposed solution can be successfully used in the electric vehicle (automotive field) and high-power electrical traction (e.g., trains, high power electrical machines and drives). The same solution can also be used successfully in fast battery charging applications and chemical electrolysis processes.
- 12 July 2022
- Published by Springer Nature
- p. 539-548
Analysis of an Independent Double Boost Interleaved Converter in a Renewable Energy Application
- 12 July 2022
- Published by Springer Nature
- p. 539-548
Analysis of an Independent Double Boost Interleaved Converter in a Renewable Energy Application
- 12 July 2022
- Published by Springer Nature
- p. 589-600
AC-DC Microgrid Analysis Using a Hybrid Real-Time HiL Approach
- 12 July 2022
- Published by Springer Nature
- p. 589-600
AC-DC Microgrid Analysis Using a Hybrid Real-Time HiL Approach
- Open Access
- 28 June 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (13) , 5993
Independent Double-Boost Interleaved Converter with Three-Level Output
This paper introduces a novel converter topology based on an independent controlled double-boost configuration. The structure was achieved by combining two independent classic boost converters connected in parallel at the input and in series at the output. Through proper control of the two boost converters, an interleaved topology was obtained, which presents a low ripple for the input current. Being connected in series at the output, a three-level structure was attained with twice the voltage gain of classic boost and interleaved topologies. A significant feature of the proposed converter is the possibility of independent operation of the two integrated boost converters, in both symmetrical and asymmetrical modes. This feature may be particularly useful in voltage balancing or interconnection with bipolar DC grids/applications. The operation principle, simulations, mathematical analysis, and laboratory prototype experimental results are presented.
- 28 June 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (13) , 5993
Open AccessIndependent Double-Boost Interleaved Converter with Three-Level Output
This paper introduces a novel converter topology based on an independent controlled double-boost configuration. The structure was achieved by combining two independent classic boost converters connected in parallel at the input and in series at the output. Through proper control of the two boost converters, an interleaved topology was obtained, which presents a low ripple for the input current. Being connected in series at the output, a three-level structure was attained with twice the voltage gain of classic boost and interleaved topologies. A significant feature of the proposed converter is the possibility of independent operation of the two integrated boost converters, in both symmetrical and asymmetrical modes. This feature may be particularly useful in voltage balancing or interconnection with bipolar DC grids/applications. The operation principle, simulations, mathematical analysis, and laboratory prototype experimental results are presented.