Mykhailo Hlobchak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mykhailo Hlobchak has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Hustav Hudz
Національний університет "Львівська політехніка", м. Львів
4 shared publications Lviv Polytechnic National University
2 shared publications- Roman Pelo
Національний університет "Львівська політехніка
2 shared publications - Roman Zinko
Lviv Polytechnic National University
2 shared publications - Andiy Beshley1 shared publication
- Andrii Bokhonko
Lviv Polytechnic National University
1 shared publication
Latest Publications
- Open Access
- 29 September 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 10 (3(110)) , 315-323
Diagnostics of a Vehicle with an Air Compensator Using Artificial Intelligence
The research object is the air-cushion air compensation system of an off-road vehicle that reduces vertical body load on the terrain surface. The problem addressed is the absence of effective automated diagnostics for this system: conventional threshold-based methods fail to detect gradual degradation of the air compensator compressor and bearing units under variable dynamic loads.On a simulation-driven dataset of 5,000 labelled time-series windows, the Random Forest classifier reached 92.1 % accuracy (F1-macro = 0.910), outperforming SVM (84.1 %) and XGBoost (89.4 %). The two-layer LSTM (hidden 64/32, dropout 0.2, look-back 512 steps) achieved MAE = 9.4 h (R² = 0.89) for Remaining Useful Life prediction - a 49.7 % improvement over classical RNN (18.7 h) - at a 100-h forecast horizon. Four defect classes of the air compensator with their vibration signatures in the 0–10 kHz range are identified and systematized.The results are explained by the LSTM gate mechanism retaining long-range temporal dependencies between gradually rising vibration background and compressor failure, while RF robustly aggregates 15 heterogeneous features under noisy sensor conditions. The distinctive feature is the first application of the RF + LSTM hybrid to the specific class of aircushion air compensation systems - not addressed in prior PHM or vibration-diagnostics literature.Practical application: predictive maintenance of off-road vehicle air compensation systems - the method enables scheduling compressor servicing with a 100-h lead time, reducing unplanned downtime and emergency repair costs in remote terrain operations.
- 29 September 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Mechanics and Advanced Technologies
- Vol. 10 (3(110)) , 315-323
Open AccessDiagnostics of a Vehicle with an Air Compensator Using Artificial Intelligence
The research object is the air-cushion air compensation system of an off-road vehicle that reduces vertical body load on the terrain surface. The problem addressed is the absence of effective automated diagnostics for this system: conventional threshold-based methods fail to detect gradual degradation of the air compensator compressor and bearing units under variable dynamic loads.On a simulation-driven dataset of 5,000 labelled time-series windows, the Random Forest classifier reached 92.1 % accuracy (F1-macro = 0.910), outperforming SVM (84.1 %) and XGBoost (89.4 %). The two-layer LSTM (hidden 64/32, dropout 0.2, look-back 512 steps) achieved MAE = 9.4 h (R² = 0.89) for Remaining Useful Life prediction - a 49.7 % improvement over classical RNN (18.7 h) - at a 100-h forecast horizon. Four defect classes of the air compensator with their vibration signatures in the 0–10 kHz range are identified and systematized.The results are explained by the LSTM gate mechanism retaining long-range temporal dependencies between gradually rising vibration background and compressor failure, while RF robustly aggregates 15 heterogeneous features under noisy sensor conditions. The distinctive feature is the first application of the RF + LSTM hybrid to the specific class of aircushion air compensation systems - not addressed in prior PHM or vibration-diagnostics literature.Practical application: predictive maintenance of off-road vehicle air compensation systems - the method enables scheduling compressor servicing with a 100-h lead time, reducing unplanned downtime and emergency repair costs in remote terrain operations.
- Open Access
- 29 May 2026
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 58,p. 15-22
Temperature regime and energy capacity of bus friction clutches in urban operating conditions
Problem. Friction clutches (FC) of motor vehicles operate under significant thermal and dynamic loads, especially in urban driving conditions characterized by frequent starts and stops. The reliability and service life of FC largely depend on the thermal state of friction pairs, which is influenced by the thermophysical properties of materials, clutch design, and heat transfer conditions. Existing methods for calculating and designing FC often do not sufficiently consider the interrelated dynamic, thermal, and frictional processes occurring during operation, which leads to a reduction in their service life and operational efficiency. Goal. The purpose of the work is to study the temperature regime and energy consumption of bus friction clutches in the urban operating cycle. Methodology. The temperature distribution in FC elements was described using the differential heat conduction equation in a cylindrical coordinate system with corresponding initial and boundary conditions. Due to the complexity of the clutch geometry and operating modes, a three-dimensional thermal model based on thermal resistance grids was developed. The slipping work of the friction clutch during operation of the Etalon bus under SAE-regulated driving modes was calculated to determine the boundary conditions of the second kind (heat generation). Boundary conditions of the third kind (heat transfer) were also substantiated. Numerical simulation was performed using the Fourier-2 x, y, z software package. Results. The study determined the temperature distribution in the friction pairs of the clutch under urban operating conditions and established the influence of heat transfer coefficients on the thermal state and energy consumption of the friction clutch. It was shown that changes in heat transfer conditions significantly affect the temperature indicators and operational characteristics of FC friction pairs. Originality. A three-dimensional thermal model of a bus friction clutch operating in an urban cycle was developed, taking into account the interrelated thermal and frictional processes as well as variable heat transfer conditions. The proposed approach allows a more accurate assessment of the thermal behavior and energy capacity of FC under real operating conditions. Practical value. The obtained results can be used in the design and optimization of bus friction clutches, improvement of their thermal reliability and durability, as well as in the selection of effective operating modes and materials for friction pairs.
- 29 May 2026
- Published by Kharkiv National Automobile and Highway University in Automobile Transport
- No. 58,p. 15-22
Open AccessTemperature regime and energy capacity of bus friction clutches in urban operating conditions
Problem. Friction clutches (FC) of motor vehicles operate under significant thermal and dynamic loads, especially in urban driving conditions characterized by frequent starts and stops. The reliability and service life of FC largely depend on the thermal state of friction pairs, which is influenced by the thermophysical properties of materials, clutch design, and heat transfer conditions. Existing methods for calculating and designing FC often do not sufficiently consider the interrelated dynamic, thermal, and frictional processes occurring during operation, which leads to a reduction in their service life and operational efficiency. Goal. The purpose of the work is to study the temperature regime and energy consumption of bus friction clutches in the urban operating cycle. Methodology. The temperature distribution in FC elements was described using the differential heat conduction equation in a cylindrical coordinate system with corresponding initial and boundary conditions. Due to the complexity of the clutch geometry and operating modes, a three-dimensional thermal model based on thermal resistance grids was developed. The slipping work of the friction clutch during operation of the Etalon bus under SAE-regulated driving modes was calculated to determine the boundary conditions of the second kind (heat generation). Boundary conditions of the third kind (heat transfer) were also substantiated. Numerical simulation was performed using the Fourier-2 x, y, z software package. Results. The study determined the temperature distribution in the friction pairs of the clutch under urban operating conditions and established the influence of heat transfer coefficients on the thermal state and energy consumption of the friction clutch. It was shown that changes in heat transfer conditions significantly affect the temperature indicators and operational characteristics of FC friction pairs. Originality. A three-dimensional thermal model of a bus friction clutch operating in an urban cycle was developed, taking into account the interrelated thermal and frictional processes as well as variable heat transfer conditions. The proposed approach allows a more accurate assessment of the thermal behavior and energy capacity of FC under real operating conditions. Practical value. The obtained results can be used in the design and optimization of bus friction clutches, improvement of their thermal reliability and durability, as well as in the selection of effective operating modes and materials for friction pairs.
- 9 December 2024
- Published by Lviv Polytechnic National University in Transport technologies
- Vol. 2024 (2) , 65-74
Influence of mode and design factors on the temperature condition of automobile drum brakes
The current state of the highway pavement makes it possible to implement prompt transportation operations. These circumstances lead to the movement of vehicles at high speeds, which is impossible without a braking system capable of ensuring high braking efficiency and optimal flow of the process from the standpoint of stability and controllability. One of the main requirements for a modern automatic transmission braking system is the stability of the initial parameters, that is, parametric reliability. Therefore, it is important to have data on the brakes' operating modes and energy consumption. Only with such data is it possible to create a braking system whose output characteristic will be sufficiently stable under conditions of high energy load. Therefore, it is no coincidence that the international methodology for testing the effectiveness of vehicle brakes (UNECE Rule 13) provides for Test I, which is characterized by cyclic braking (urban conditions), and Test II, which is characterized by prolonged braking (mountain conditions). The brake mechanism is the most unstable link of the brake system; one way to increase its efficiency is to ensure sufficient energy capacity, which is limited by the temperature of the friction surface. The object of the study is the question of the equivalence of the change in the drum radius and the width of the friction belt of the brake, taking the invariance of the temperature of the friction surface under the selected test mode as the criterion of equivalence. It is shown that the role of the drum's side wall on the brake's temperature mode under different test modes can also be evaluated on grid thermal models with the involvement of the "Fourier–2 x,y,z" software complex. The effect of the heat transfer coefficient on the temperature mode of the brake due to the consideration of the gap between the drum wall and the wheel rim is shown. Derived formulas for determining the friction belt's equivalent width under the equality of heat flows, masses, and cooling surfaces.
- 9 December 2024
- Published by Lviv Polytechnic National University in Transport technologies
- Vol. 2024 (2) , 65-74
Influence of mode and design factors on the temperature condition of automobile drum brakes
The current state of the highway pavement makes it possible to implement prompt transportation operations. These circumstances lead to the movement of vehicles at high speeds, which is impossible without a braking system capable of ensuring high braking efficiency and optimal flow of the process from the standpoint of stability and controllability. One of the main requirements for a modern automatic transmission braking system is the stability of the initial parameters, that is, parametric reliability. Therefore, it is important to have data on the brakes' operating modes and energy consumption. Only with such data is it possible to create a braking system whose output characteristic will be sufficiently stable under conditions of high energy load. Therefore, it is no coincidence that the international methodology for testing the effectiveness of vehicle brakes (UNECE Rule 13) provides for Test I, which is characterized by cyclic braking (urban conditions), and Test II, which is characterized by prolonged braking (mountain conditions). The brake mechanism is the most unstable link of the brake system; one way to increase its efficiency is to ensure sufficient energy capacity, which is limited by the temperature of the friction surface. The object of the study is the question of the equivalence of the change in the drum radius and the width of the friction belt of the brake, taking the invariance of the temperature of the friction surface under the selected test mode as the criterion of equivalence. It is shown that the role of the drum's side wall on the brake's temperature mode under different test modes can also be evaluated on grid thermal models with the involvement of the "Fourier–2 x,y,z" software complex. The effect of the heat transfer coefficient on the temperature mode of the brake due to the consideration of the gap between the drum wall and the wheel rim is shown. Derived formulas for determining the friction belt's equivalent width under the equality of heat flows, masses, and cooling surfaces.
- 6 June 2023
- Published by Lviv Polytechnic National University in Transport technologies
- Vol. 2023 (1) , 83-89
The influence of important factors on the distribution of heat flows in elements of drum brakes of vehicles
The movement of motor vehicles at high speeds is impossible without a braking system capable of ensuring high braking efficiency. It has been established that the most unstable link of the braking system is the brake mechanism, since from the energy point of view, braking with friction brakes is the process of converting part of the mechanical energy of the motor vehicle into heat. Braking is a long process during which many counterbody parameters change, in particular, thermophysical parameters due to temperature changes, friction coefficient, etc. If, under these circumstances, the surface and volume temperatures exceed the permissible values, then the frictional properties of the friction pairs and the conditions of the interaction of the parts change, which leads to a change in the characteristics of the brake mechanisms and the brake system as a whole. The standards of most countries and international prescriptions regulate braking performance meters not only for one-time emergency braking with cold brakes but also for emergency braking performed after the conversion of a given amount of energy into heat during a given time. It was found that the preservation of the necessary braking efficiency after the conversion of a given amount of energy into heat will be ensured only if the braking system has sufficient energy capacity. The object of the research is the distribution of heat flows in the elements of the brake mechanism, which determine the critical temperature of the friction surfaces. It was established that F. Charron's formula cannot correctly estimate such a distribution due to taking into account only the thermophysical properties of materials of friction pairs. It is shown that the influence of the design parameters of the brake and its modes of operation on the distribution of heat flows in the drum brake of a motor vehicle can also be estimated on grid thermal models with the involvement of the "Fourier-2xyz" software complex.
- 6 June 2023
- Published by Lviv Polytechnic National University in Transport technologies
- Vol. 2023 (1) , 83-89
The influence of important factors on the distribution of heat flows in elements of drum brakes of vehicles
The movement of motor vehicles at high speeds is impossible without a braking system capable of ensuring high braking efficiency. It has been established that the most unstable link of the braking system is the brake mechanism, since from the energy point of view, braking with friction brakes is the process of converting part of the mechanical energy of the motor vehicle into heat. Braking is a long process during which many counterbody parameters change, in particular, thermophysical parameters due to temperature changes, friction coefficient, etc. If, under these circumstances, the surface and volume temperatures exceed the permissible values, then the frictional properties of the friction pairs and the conditions of the interaction of the parts change, which leads to a change in the characteristics of the brake mechanisms and the brake system as a whole. The standards of most countries and international prescriptions regulate braking performance meters not only for one-time emergency braking with cold brakes but also for emergency braking performed after the conversion of a given amount of energy into heat during a given time. It was found that the preservation of the necessary braking efficiency after the conversion of a given amount of energy into heat will be ensured only if the braking system has sufficient energy capacity. The object of the research is the distribution of heat flows in the elements of the brake mechanism, which determine the critical temperature of the friction surfaces. It was established that F. Charron's formula cannot correctly estimate such a distribution due to taking into account only the thermophysical properties of materials of friction pairs. It is shown that the influence of the design parameters of the brake and its modes of operation on the distribution of heat flows in the drum brake of a motor vehicle can also be estimated on grid thermal models with the involvement of the "Fourier-2xyz" software complex.
- Open Access
- 9 June 2022
- Published by Lutsk National Technical University in СУЧАСНІ ТЕХНОЛОГІЇ В МАШИНОБУДУВАННІ ТА ТРАНСПОРТІ
- Vol. 1 (18) , 66-73
СИНТЕЗ ЧАСТОСТІ ВИКОРИСТАННЯ ПЕРЕДАЧ СХІДЧАСТОЇ КОРОБКИ ПЕРЕМИКАННЯ ПЕРЕДАЧ (КПП) У ПРОЦЕСІ ВІДТВОРЕННЯ ТИПОВИХ ЦИКЛІВ
Ретроспективний аналіз ситуації транспортних потоків в умовах міських перевезень свідчить про різноманіття вантажних траснпортних засобів як за вантажністю так і за класом. Окрім цього транспортний потік у вказаних умовах характеризується великою щільністю. Вище сказане накладає низку обмежень, зокрема, на конструктивні параметри транспортних засобів, ба більше, на вибір силової установки. Значна частина транспортних засобів, що формують такий потік в умовах населених пунктів, зокрема, великих обласних центрів, оснащені силовими агрегатами у складі ДВЗ механічна східчаста коробка передач (МСКП). Відомо, що програма руху окремого взятого транспортного засобу близька до циклічного (за наявністю окремих фаз). Визначальним для ідентифікації програм руху є аналіз реальних маршрутів дрібногуртових перевезень в умовах міста Львова, що характеризується варіативністю відстаней та тривалостей їхньої реалізації. Домінуючими в умовах міста є транспортні засоби оснащені, переважно, 4 6-ти східчасті траснсмісії. Обмеженння швидкості і короткі, здебільшого, відстані між пунктами циклу, дають підстави стосовно доцільності використання в якості елемента трансмісії багатосхідчастих МСКП. Відтак постає завдання стосовно дослідження кількості перемикань за рахунок визначення частості тієї чи іншої передачі в МСКП в умовах міського транспортного руху. Метою дослідження є виявити доцільність використання усіх передач транспортного засобу з конструктивної точки зору для транспортних засобів, які задіяні в таких умовах експлуатації. Ключові слова: коробка передач, базовий та еквівалентний їздові цикли, розганяння, вибіг, сповільнення, частість передачі.
- 9 June 2022
- Published by Lutsk National Technical University in СУЧАСНІ ТЕХНОЛОГІЇ В МАШИНОБУДУВАННІ ТА ТРАНСПОРТІ
- Vol. 1 (18) , 66-73
Open AccessСИНТЕЗ ЧАСТОСТІ ВИКОРИСТАННЯ ПЕРЕДАЧ СХІДЧАСТОЇ КОРОБКИ ПЕРЕМИКАННЯ ПЕРЕДАЧ (КПП) У ПРОЦЕСІ ВІДТВОРЕННЯ ТИПОВИХ ЦИКЛІВ
Ретроспективний аналіз ситуації транспортних потоків в умовах міських перевезень свідчить про різноманіття вантажних траснпортних засобів як за вантажністю так і за класом. Окрім цього транспортний потік у вказаних умовах характеризується великою щільністю. Вище сказане накладає низку обмежень, зокрема, на конструктивні параметри транспортних засобів, ба більше, на вибір силової установки. Значна частина транспортних засобів, що формують такий потік в умовах населених пунктів, зокрема, великих обласних центрів, оснащені силовими агрегатами у складі ДВЗ механічна східчаста коробка передач (МСКП). Відомо, що програма руху окремого взятого транспортного засобу близька до циклічного (за наявністю окремих фаз). Визначальним для ідентифікації програм руху є аналіз реальних маршрутів дрібногуртових перевезень в умовах міста Львова, що характеризується варіативністю відстаней та тривалостей їхньої реалізації. Домінуючими в умовах міста є транспортні засоби оснащені, переважно, 4 6-ти східчасті траснсмісії. Обмеженння швидкості і короткі, здебільшого, відстані між пунктами циклу, дають підстави стосовно доцільності використання в якості елемента трансмісії багатосхідчастих МСКП. Відтак постає завдання стосовно дослідження кількості перемикань за рахунок визначення частості тієї чи іншої передачі в МСКП в умовах міського транспортного руху. Метою дослідження є виявити доцільність використання усіх передач транспортного засобу з конструктивної точки зору для транспортних засобів, які задіяні в таких умовах експлуатації. Ключові слова: коробка передач, базовий та еквівалентний їздові цикли, розганяння, вибіг, сповільнення, частість передачі.
- 1 January 2022
- Published by Lviv Polytechnic National University in Ukrainian journal of mechanical engineering and materials science
- Vol. 8 (2) , 59-66
Algorithm of machine creation using the mechanism of articulated disjunction
Problem statement. Any methodology is based on knowledge about the problem. The fullness and orderliness of the base determine further volumes and possible options for implementing the methodology. Purpose. To analyze the existing ways of machine creations and propose the new effective algorithm of machine creation using the mechanism of articulated disjunction. Considering the research structure and improvement of the informational and program technologies, changes to the traditional methodology of machine creation are made. The existing paradigm: parametric and functional performance of the machine, the design of which is improved based on existing machines, is a modification of predecessors' parametric and functional performance. Proposed paradigm: parametric and functional performance of the new machine, improved based on the subject area of technical solutions, methods of design and operational conditions more precisely coincide with the technological process to realize what they are called. Proposed hypothesis: there are such methodologies of design that provide an opportunity to provide rational productivity within existing operational conditions. Methodology. Morphological space is used to form qualitative features of the created machine. The peculiarity of the proposed methodology is that the set of features of the created machine also contains subsets of processes and phenomena in which the machine is involved. This allows assessing the compliance of the process in which the machine is involved and the machine operation processes. Findings (results). The algorithm of machine creation using the mechanism of articulated disjunction is proposed. It allows the creation of the new construction at a given sequence of stages to improve at every step in a given direction based on the determined criteria. Originality (novelty). Method of articulated disjunction, which is based on the principle of formation of the set of necessary properties of the structural elements of the machine based on a given primary criterion of machine efficiency. The essence of the method of articulated disjunction is that the sample of elements that have common features and properties is reformulated based on a given criterion. The proposed method provides an opportunity to determine the advantages of one structure described by various factors, in comparison with others, based on the criterion set. Practical value. The algorithm of synthesis and improvement of existing machines allows for determining their main quality features in the initial stages of the design of machines.
- 1 January 2022
- Published by Lviv Polytechnic National University in Ukrainian journal of mechanical engineering and materials science
- Vol. 8 (2) , 59-66
Algorithm of machine creation using the mechanism of articulated disjunction
Problem statement. Any methodology is based on knowledge about the problem. The fullness and orderliness of the base determine further volumes and possible options for implementing the methodology. Purpose. To analyze the existing ways of machine creations and propose the new effective algorithm of machine creation using the mechanism of articulated disjunction. Considering the research structure and improvement of the informational and program technologies, changes to the traditional methodology of machine creation are made. The existing paradigm: parametric and functional performance of the machine, the design of which is improved based on existing machines, is a modification of predecessors' parametric and functional performance. Proposed paradigm: parametric and functional performance of the new machine, improved based on the subject area of technical solutions, methods of design and operational conditions more precisely coincide with the technological process to realize what they are called. Proposed hypothesis: there are such methodologies of design that provide an opportunity to provide rational productivity within existing operational conditions. Methodology. Morphological space is used to form qualitative features of the created machine. The peculiarity of the proposed methodology is that the set of features of the created machine also contains subsets of processes and phenomena in which the machine is involved. This allows assessing the compliance of the process in which the machine is involved and the machine operation processes. Findings (results). The algorithm of machine creation using the mechanism of articulated disjunction is proposed. It allows the creation of the new construction at a given sequence of stages to improve at every step in a given direction based on the determined criteria. Originality (novelty). Method of articulated disjunction, which is based on the principle of formation of the set of necessary properties of the structural elements of the machine based on a given primary criterion of machine efficiency. The essence of the method of articulated disjunction is that the sample of elements that have common features and properties is reformulated based on a given criterion. The proposed method provides an opportunity to determine the advantages of one structure described by various factors, in comparison with others, based on the criterion set. Practical value. The algorithm of synthesis and improvement of existing machines allows for determining their main quality features in the initial stages of the design of machines.
- Open Access
- 1 May 2021
- Published by Kharkiv National Automobile and Highway University in Vehicle and Electronics. Innovative Technologies
- No. 19,p. 35-40
Comparative evaluation of dynamics and fuel efficiency indicators of the car with robotic stepped transmission under condition of different diameters of engine cylinders
Problem. Repair dimensions method regulates increment of cylinders by the means of mechanical treatment, which leads to increasing of working volume of the engine. This will cause a change of dynamics and fuel-efficiensy indicators of the car with the certain type of transmission. Goal. The goal is to comparatively evaluate dynamism and fuel-efficiency of automotive vehicle category N2 with two options of engines, which have nominal and repair cylinder sizes. The riding cycle of the cars with robotic stepped gearbox was researched, that is without breaking of force stream while switching gears. Methology. Imitative simulation of cars riding cycle, according to standard, was conducted with the help of Matlab Simulink software. Because of the fact that mathematical model of cars movement during mentioned cycle is based on elementary dependencies, for its realization the only basics avialable blocks of the sofware package were used. The flowchart is given in the paper. Results. Simulation of riding cycle of N2 – category automotive vehicle with robotic gearbox was conducted at full engine’s capacity while running-up. Obtained results have shown that engines with repairment sizes have advantage in dynamism indicators, engines with nominal cylinder sizes have advantages in fuel-efficiency. Originality. For obtaining of comparative evaluation of dynamics and fuel-efficiency indicators of the car with robotic gearbox with different engines, the imitation simulation of riding cycle, according to standarts, was used with the help of Matlab Simulink software. Practical value. Application of the repairment sizes method upon the engine’s cylinder liners has shown improvement of dynamics indicators of car with robotic transmission, which will improve its productivity under excessive engines work conditions.
- 1 May 2021
- Published by Kharkiv National Automobile and Highway University in Vehicle and Electronics. Innovative Technologies
- No. 19,p. 35-40
Open AccessComparative evaluation of dynamics and fuel efficiency indicators of the car with robotic stepped transmission under condition of different diameters of engine cylinders
Problem. Repair dimensions method regulates increment of cylinders by the means of mechanical treatment, which leads to increasing of working volume of the engine. This will cause a change of dynamics and fuel-efficiensy indicators of the car with the certain type of transmission. Goal. The goal is to comparatively evaluate dynamism and fuel-efficiency of automotive vehicle category N2 with two options of engines, which have nominal and repair cylinder sizes. The riding cycle of the cars with robotic stepped gearbox was researched, that is without breaking of force stream while switching gears. Methology. Imitative simulation of cars riding cycle, according to standard, was conducted with the help of Matlab Simulink software. Because of the fact that mathematical model of cars movement during mentioned cycle is based on elementary dependencies, for its realization the only basics avialable blocks of the sofware package were used. The flowchart is given in the paper. Results. Simulation of riding cycle of N2 – category automotive vehicle with robotic gearbox was conducted at full engine’s capacity while running-up. Obtained results have shown that engines with repairment sizes have advantage in dynamism indicators, engines with nominal cylinder sizes have advantages in fuel-efficiency. Originality. For obtaining of comparative evaluation of dynamics and fuel-efficiency indicators of the car with robotic gearbox with different engines, the imitation simulation of riding cycle, according to standarts, was used with the help of Matlab Simulink software. Practical value. Application of the repairment sizes method upon the engine’s cylinder liners has shown improvement of dynamics indicators of car with robotic transmission, which will improve its productivity under excessive engines work conditions.