SDSerhii Danets

Serhii Danets

*This is an algorithmically generated author record based on publicly available information.

Serhii Danets has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of the speed distribution of vehicles involved in accidents on urban roads

    by Oleksandr Riabushenko, Serhii Danets, Vitalii Kashkanov

    The aim of this study is to conduct a comprehensive statistical analysis of the speed distribution of vehicles involved in road traffic accidents (RTAs) with casualties on the urban road network of the city of Kharkiv (Ukraine). The empirical basis of the research consists of official police investigation materials covering 294 recorded RTA cases. Within the scope of the study, empirical speed distributions were constructed and the main statistical characteristics were analyzed, including the mean value, mode, as well as the coefficients of skewness and kurtosis. The results indicate that the highest concentration of RTA cases occurs within the speed interval of 50–60 km/h, with an average speed of 53 km/h. It was found that in 61% of the cases the legally established urban speed limit of 50 km/h was exceeded; in 13% of the cases the speed exceeded 70 km/h, and in 4% of the cases it exceeded 100 km/h. The analysis of the empirical distribution shape revealed pronounced right-sided skewness, significant kurtosis, and a high modal frequency, which prevents an adequate approximation by the normal distribution or other closely related theoretical models. A comparative analysis of speed distributions for specific types of road traffic accidents, such as vehicle-to-vehicle collisions and pedestrian impacts, demonstrated statistical characteristics similar to those of the overall sample. The observed features of the shape and structure of the speed distributions may be attributed both to imperfections in the existing urban speed enforcement system and to the specific methodologies used to estimate vehicle speeds during accident investigations. The findings of this study have both scientific and practical significance, as they may be used to further investigate the impact of speed as a factor in road traffic safety and to provide an additional analytical tool for assessing the probability of road traffic accidents as a function of vehicle speed.

  • Open Access

    Variability in the interpretation of information in the investigation of road traffic incidents using 3D scanning devices

    by Dmytro Leontiev, Vitalii Varlakhov, Andrii Frolov, Serhii Danets, Evgeny Don, Дмитро Леонтьєв, Віталій Варлахов, Сергій Данець, Євген Дон

    Problem. One of the key challenges in the investigation of road traffic accidents (RTAs) is the reliable determination of the collision mechanism between vehicles, especially in cases where the vehicles have been moved from the scene. Traditional methods of documentation and analysis often lack sufficient accuracy and objectivity. Goal. The aim of this study is to identify the mechanism of collision between two vehicles by analyzing and comparing their geometric damage patterns obtained via 3D scanning, followed by determining their actual relative positioning at the moment of initial contact. Methodology. To achieve this goal, a portable 3D scanner Artec Leo was used, enabling high-precision scanning of vehicles regardless of their location. The resulting 3D models of the damaged vehicles were aligned with each other and with a digital version of the accident scene diagram. During the analysis, vehicle orientation angles, the location of primary contact, movement directions, and damage characteristics were determined. Results. It was established that the collision occurred at an angle of 8–10° within the driving lane of vehicle 1. This conclusion is supported by the alignment of damage areas, the position of the front right headlamp of vehicle 1, and the distribution of glass and plastic fragments. The zone of initial contact was localized within 2 meters from the right edge of the carriageway. Originality. An integrated approach to digital traffic accident reconstruction using 3D scanning is proposed, allowing for accurate analysis even without access to the original accident scene. Practical value. The methodology can be applied in forensic vehicle examination, court investigations, and insurance case assessments to objectively determine the circumstances of a traffic collision.


  • Open Access

    Identifying the impact of posted speed limits on vehicle travel mode on urban routes

    by Oleksandr Riabushenko, Ivan Nahliuk, Serhii Danets, Mykola Bahlai

    The object of the study is the vehicle driving mode and the results of trip on the road network of a large city under various speed limit conditions. The problem of quantitative assessment of the impact of speed limits on the average speed on the route, as well as on the indicators of driving mode unevenness, was solved. The values of such traffic parameters as average speed, average speed deviation, acceleration noise, speed gradient, energy gradient at different values of the posted speed limit (PSL) were obtained. Graphs of changes in the average speed and indicators of the unevenness of the speed regime were constructed and mathematical models of the dependence of the average speed on urban routes on the adopted speed limit were proposed. The results showed an increase in the average speed on the route by an average of 2.4 km/h with an increase in PSL by 10 km/h. At the same time, the dependence of the average speed on the PSL is non-linear and shows a decrease in the impact of the speed limit factor at higher PSL values (from 3.5 km/h for a PSL of 50 km/h to 1.24 km/h for a PSL of 80 km/h). Increasing the PSL does not affect the specific time in motion and leads to an increase in the specific idle time. With an increase in PSL, the acceleration noise and energy gradient increase. The increase in average speed is explained by the ability to increase speed in low-loaded sections of the route, but with an increase in PSL, the ability to realize the increased speed decreases, and the traffic mode itself becomes more uneven. The research was carried out using the “driving laboratory” method on three different routes under the same initial conditions for speed limits from 50 to 80 km/h. The driving mode of the car was recorded in the form of GPS tracks. The results can be used to assess the impact of PSL changes on the technical and economic performance of urban road transport. The results will also be useful in conducting an information campaign and promoting a culture of compliance with the speed limits established in cities among drivers

  • Open Access

    Technical Condition Assessment and Modelling of Reed Valves in Vehicle Engine Intake Systems

    by Oleksandr Kravchenko, Alexander Khrulev, Juraj Gerlici, Oleksii Saraiev, Serhii Danets

    Journal Communications - Scientific Letters of the University of ?ilina is now a well-established open-access scientific journal aimed primarily at the topics connected with the field of transport.


  • Open Access

    ДОЦІЛЬНІСТЬ ВПРОВАДЖЕННЯ ОДНОСТОРОННЬОГО РУХУ НА ВУЛИЧНО-ДОРОЖНІЙ МЕРЕЖІ МІСТ

    by Ольга Холодова, Марина Бугайова, Сергій Данець

    Доведена актуальність проблеми організації дорожнього руху на вулично-дорожній мережі міст через постійне зростання автомобільного транспорту, що спричиняє затори, дорожньо-транспортні пригоди та забруднення атмосферного повітря. Все це погіршує економіку й якість життя, створюючи небезпеку для пішоходів. Досвід різних країн, включаючи Україну, підтверджує, що односторонній рух є одним із ключових заходів, здатним підвищити швидкість транспортних потоків, збільшити пропускну спроможність вулиць, знизити затори та аварійність. Проаналізовано вплив організації одностороннього руху на показники ефективності функціонування транспортної мережі. Розглянуто конкретний приклад введення одностороннього руху на ділянці вулично-дорожньої мережі Індустріального району м. Харків. При цьому досліджені різні схеми руху транспортних засобів по ній та порівняні з існуючою. Запровадження одностороннього руху на двох паралельних вулицях Миру та Біблика забезпечує значний соціальний ефект, а саме: зменшується кількість конфліктних точок у 2,5 рази, знижується коефіцієнт небезпеки в 1,4 рази та скорочується час реалізації транспортних кореспонденцій на 7%. Також встановлено вплив одностороннього руху на коефіцієнт відносної небезпеки перехрестя в залежності від конфігурації перехрестя. Встановлено, що запровадження одностороннього руху є виправданим порівняно з існуючою організацією руху. Це підкреслює необхідність ширшого застосування цього заходу для зниження трафіку та підвищення безпеки руху. Ключові слова: односторонній рух, вулично-дорожня мережа, програмне забезпечення, перехрестя, моделювання, критерій, транспортні кореспонденції.

  • Open Access

    Experimental evaluation of vehicle braking efficiency considering the influence of tires

    by Olexii Saraiev, Iryna Saraіevа, Serhii Danets, Oleksandr Kozlov

    Problem. Checking the brake system of a vehicle is crucial in terms of assessing its operational safety, and performance indicators and permissible modes are determined by the state standards of Ukraine. However, there are challenges related to the accuracy and objectivity of evaluating the braking efficiency of a car. The coefficient of adhesion between the wheel and the road surface is the primary factor that significantly affects the braking dynamics of a vehicle. This coefficient constantly changes due to various factors such as road surface conditions, tire design and properties, tire effectiveness, and car speed. Assessing the impact of these factors on a car's braking performance is difficult. Goal. The aim of this study is to experimentally determine the influence of tire properties on vehicle braking efficiency by conducting a multifactorial experiment on cars of different brands with different types of tires. Methodology. The study employs the method of conducting braking tests under road conditions using the necessary equipment. Statistical data on braking efficiency parameters were collected from cars equipped with different tire brands. Experimental tests were conducted on Mazda 323F and Hyundai Elantra cars, using tires from various manufacturers such as Sava, Tigar, Nokian, and MICHELIN. The tests were performed on asphalt-concrete surfaces under dry and wet conditions, and the braking efficiency indicators were measured. Originality. The experiment revealed that the quality of the rubber used in car tires has a significant impact on their braking efficiency within a wide range. The deceleration of a category М1 vehicle can exceed the minimum requirements for braking efficiency, established by national and international standards, by 29-67%, depending on the tire brand. This research presents prospects for further development of experimental and statistical studies in this field, aiming to provide a better understanding of car braking efficiency parameters based on tire quality. Practical Value. The data obtained from this study are of practical importance for evaluating the effectiveness of car braking during expert investigations of traffic accidents. This enables experts to draw more objective conclusions about the accident process and determine the driver's ability to avoid such incidents.

  • Open Access

    Evaluating traffic parameters of vehicles according to registrars when conducting automotive research

    by Vladyslav Yalovenko, Serhii Danets

    The main tendencies in developing the methods of evaluating vehicles movement according to registrars when conducting automotive research of road accidents are considered. It is noted that modern video recorders, in addition to the standard recording of events in the form of video, have additional functions of recording the parameters of traffic, which allows more objective and in-depth investigation of the circumstances of road accidents. Goal. The aim of the work is development of the method of obtaining quantitative data that allow to estimate the parameters of vehicle movement on video recordings made with the help of DVR MiVue-j85. Methodology. Theoretical data of the functionality of the MiVue-j85 video recorder were verified and analyzed during the real experiment. The study includes an analysis of quantitative data to assess the parameters of vehicle movement on video recordings made using a video recorder MiVue-j85. Results. It is noted that this method currently has a number of disadvantages, which are the imperfect system of synchronization, display and recording of the received data using software designed for the DVR. The presence of integrated in the DVR GPS-navigation and G-sensor, make it possible to determine the parameters of the vehicle and the coordinates of the location of the vehicle in the process of changing its dynamics, but with a significant error that does not meet the requirements of accident research. Originality. For the first time, the method of obtaining vehicle motion parameters using a video recorder with a built-in G-sensor is shown. Practical value. The obtained results can be used in practice in the study of the circumstances of the accident. Application of the certain method will allow facilitating the process of reception of initial data, namely the parameters of vehicle movement when studying road accidents.

  • Open Access

    Estimation of braking performance of vehicles of category N1

    by S. Danez, O. Saraiev

    Оцiнка ефективностi гальмування транспортних засобiв категорiї N1

  • Open Access

    Mathematical modeling of speed change of vehicles at emergency braking

    by Sergey Danez, Olexii Saraiev

    The object of research is the reconstruction of the development of the mechanism and circumstances of the road accident. The key point of research is establishment of the car speed at different moments in the development of a traffic accident. Precisely the accuracy in determining the car speed affects the nature of the main findings of the examination. When calculating the car speed, the expert solves the inverse problem, that is, determines the speed according to the braking performance of the car and the length of the trail of braking. For the last two decades, the design of the car's brake system has changed. The brakes are equipped with antilock braking systems. At the same time, the efficiency of vehicle braking has improved significantly. But it turned out that experts can’t objectively determine the car speed, which is equipped with an anti-lock braking system, because such brakes do not leave traces of braking on the road surface. When developing and solving this problem by determining the vehicle speed, the vehicle is equipped with an anti-lock braking system, methods of differentiating and integrating a complex function are used. With a comparative analysis of the existing and proposed methods for calculating the speed of the car in the process of emergency application braking, the graphical method. According to the research results, a mathematical model for determining the speed of the car is developed, which is equipped with an anti-lock braking system. This model allows to take into account the effect of the forces of air resistance, resistance to movement and resistance to recovery not only in the steady phase of braking, but also during the reaction of the driver and the timing of the brakes. An analysis of the mathematical model shows that during these time intervals a certain deceleration will act on the car, which will depend on the speed of movement and the state of the car. Moreover, the action of the drag resistance force can significantly increase this deceleration and influence the change in the car speed. The proposed mathematical model more accurately displays the actual process of emergency braking of the car and provides a reduction in the error in calculating the speed of the car by 4–8 % compared with existing calculation methods.