YBYana Borodai

Yana Borodai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yana Borodai has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A technique for approximating a tubular helical surface with strips of toruses

    by Andrii Nesvidomin, Serhii Pylypaka, Victor Nesvidomin, Vitaliy Babka, Olga Shoman, Oleksandr Savoiskyi, Taras Pylypaka, Mykola Lokhonia, Svetlana Semirnenko, Yana Borodai

    This study’s object is the approximation of a non-swept helical tubular surface by strips of sweeping surfaces (toruses) and the construction of sweeps of these strips. Approximating non-swept tubular surfaces by sections of sweep ones is a common practice in the design of various types of pipelines. A clear example of such an approximation is a sports ball whose outer shell consists of a certain number of separate elements. These elements must fit most tightly to the non-swept surface along its certain lines. Such lines are the lines of curvature. The task is to find these lines on the surface in order to subsequently analytically describe the torus strip, which is tangent to the non-swept surface along this line. As is known, there are two families of mutually perpendicular lines of curvature on surfaces. This paper considers a family of curvature lines that has advantages over another one in terms of approximation. This explains the results reported here. Their special feature is that in order to find the desired family of curvature lines, it is necessary to solve a differential equation. The solution to this equation was borrowed from a scientific article and used for further calculations. The results were visualized in the form of an approximated tubular surface with four and six strips. The sweeps of these strips were constructed for a tubular surface, in which the center line is a helical line r = 1. All dimensions are given in linear units. Instead of a circle generatrix, it is given by the radius of the cylinder a = 2, which hosts it, and the helical parameter b = 1.5 (step H = 9.4). The radius of the circle generatrix of the tubular surface of the original tubular surface in the approximated surface in the given examples is a polygon (square or equilateral hexagon).

  • Open Access

    GLASS IN CONSTRUCTION AND DESIGN: NEW MATERIALS AND INNOVATIONS

    by Serhii Taranenko, Artem Borodai, Yana Borodai

    The article is devoted to the study of innovative glass materials, generalization, systematization and unification of information about modern technologies and modifications of glass. The physical and chemical properties of glass as a universal material that is actively used in construction and design are considered. The technological process of glass manufacturing is described. Examples and illustrative material of various modifications of glass, in particular its innovative types, are given. The issues of manufacturing, features, specific characteristics of «smart» glass, illuminated glass, high-strength glass, cast glass, «chameleon glas» are analyzed and revealed. The prospects for the development of modern glass technologies, which have now found wide application in architecture and interior design, are highlighted. A review of currently available research that fully or tangentially affects the raised issues is conducted. The essence of the concept of the object of research and its basic provisions are formulated. The material on modern innovative modifications of glass is systematized, which can become an impetus for further research and be perceived as a unified reference material.

  • Open Access

    APPLICATION OF INFORMATION TECHNOLOGIES IN MEMORY OBJECTS ON THE EXAMPLE OF THE TERRITORY OF BABYN YAR

    by Serhii Taranenko, Artem Borodai, Yana Borodai, Яна Бородай

    The article is dedicated to researching the possibilities of interaction of modern information and communication technologies with objects of memory, which in the long term will remain the main examples of architectural and sculptural means for immortalizing certain figures, events, circumstances in Ukrainian society, primarily related to the military aggression of the Russian Federation. The relevance of this topic also lies in local familiarization with modern multimedia techniques and information methods, with the help of which it is now possible to emotionally influence the observer and more fully and clearly convey a certain message of a significant place or building. An overview of the currently available studies that fully or tangentially touch on the raised issues has been conducted. The essence of the concept of the research object and its basic provisions are formulated. Significant installations and places of the territory of the National Historical and Memorial Reserve «Babyn Yar» are described in detail, which serve as reference points, samples, based on which conclusions are formed regarding the quality and feasibility of using information technologies. The material on memory objects has been analyzed and synthesized, which can become an impetus for further research and a basis for the creation of memorials and monuments of various types. Еhe use of information and communication technologies in the process of functional-spatial formation of memory objects is the latest effective method for the most complete preservation and the brightest, most expedient delivery of information, strengthening the impression of a place, expressing the composition, etc.

  • Open Access

    Construction of mathematical model of particle movement by an inclined screw rotating in a fixed casing

    by Tetiana Volina, Serhii Pylypaka, Mykhailo Kalenyk, Serhii Dieniezhnikov, Viktor Nesvidomin, Iryna Hryshchenko, Yana Lytvynenko, Artem Borodai, Dmytro Borodai, Yana Borodai

    Screw conveyors are used to move bulk materials vertically upwards, horizontally, and at an angle to the horizon. The processes that take place when particles are moved by a screw conveyor in vertical and horizontal directions have been studied. There is a significant difference between them: for transportation in the vertical direction, the necessary conditions must be ensured (sufficient angular speed of rotation of the screw), and for horizontal transportation, the movement of the particle occurs at any angular speed of rotation of the screw. Therefore, when changing the inclination of the axis of the screw, there comes a moment when transportation becomes possible, while it was impossible in the vertical direction. This paper considers the movement of a particle under the condition that it simultaneously contacts two surfaces: the moving surface of the screw and the stationary surface of the cylindrical casing in which the screw rotates. Their common line along which the particle slides is a helical line – the periphery of the screw. The particle slides along the helical line of the rotating screw, i.e., it is in relative motion with respect to it. At the same time, it slides along the surface of the casing, relative to which it is in absolute motion. The trajectory of the particle's absolute motion is its sliding track on the casing surface. When constructing differential equations of the relative motion of particles, the forces applied to the particle were taken into account. The initial position was taken to be the vertical direction of the screw to transport the particle upwards. If an auger in a cylindrical casing is tilted from the vertical direction to a certain angle, then all applied forces (except the force of weight) will also tilt to this angle. On the basis of this, generalized differential equations of the relative motion of a particle during its transportation by an inclined screw were built. They made it possible to derive a generalized mathematical model of the movement of a particle by an inclined screw that rotates inside a fixed casing


  • Open Access

    THE INFLUENCE OF MIGRATION PROCESSES ON THE FORMATION OF THE URBAN OBJECT STRUCTURE

    by Ivan Vysochyn, Serhii Borodai, Dmytro Borodai, Serhii Galushka, Artem Borodai, Yana Borodai

    In the article was found that the planned location of new or expansion of existing production clearly coincided with the movement of certain segments of the population to these regions for employment, examining and analyzing the problems of migration of the population of the former USSR. The researches of the Russian town-planners Bocharov Y.P., Belousov V.M., Vladimirov V.V., Maloyan G.A., Lezhava I.G. and other are devoted the problems of development of the theory of settlement with loss of planning component in development of systems of settlement and general plans of cities in new market (social and economic) conditions. Leading domestic urban planners have devoted their research to the problems of the development of the theory of settlement in Ukraine, the system of settlement and the development of master plans in modern market conditions (1992-2014). Some of them are Filvarov G.K., Yezhov V.I., Demin M.M., Lavrik G.I., Repin V.M., Timokhin V.O., Shkodovsky Y.M., Rudnitsky A .М. and other. The article presents the stages of formation of production relations, social, economic, architectural and spatial evolution under the pressure of migration processes, based on the analysis and research: The formation of the labor market (places of employment) in the development of industry, transport links and resettlement (early nineteenth - early twentieth century). Urbanization of cities in the early twentieth century due to migrations (free labor) from near and far agglomerations. Urbanization of the late twentieth century due to the release of labor (the collapse of the collective and state farm system). Under the pressure of migration and transport processes the compositional and planning spatial structure of the city is determined by the following aspects: the hierarchy of the city in the general network of settlements; the level of the city's public transport network; mobility of city residents; location of attractive objects for migrants in the city planning structure; socio-demographic characteristics of residents. Territories of cities with developed production are becoming the poles of industrial industry with the latest technologies, as well as centers of business.

  • Open Access

    ECOLOGICAL TECHNOLOGIES OF CONSTRUCTION IN MODERN FOLK ARCHITECTURE OF NORTHEA ST UKRAINE

    by Serhii Boroday, Dmytro Boroday, Artem Boroday, Yana Boroday, Сергій Бородай, Дмитро Бородай, Яна Бородай

    The article considers aspects of the search for alternative architectural and construction solutions in the private construction of a peasant's yard. It is proposed to ensure the appropriate level of energy and economic efficiency of buildings through the use of traditional for the folk architecture of North-Eastern Ukraine local environmentally friendly materials and construction techniques. Such techniques allow to achieve stylish national aesthetics and architectural expressiveness at the same time. The article examines the dynamics of changes in temperature parameters of the Sumy region for the period 2010-2020. which affect the architectural and planning decisions of buildings and structures. The conclusion about the tendency of the general increase of settlement temperatures of external air in the winter period is made. The general calculations of energy losses of the house from available local materials of a natural origin on heating on engineering maintenance are carried out. Examples of the use of such materials in private housing construction of farms in Sumy region are analyzed. The comparative characteristic of cost of a country house from ecological materials with cost of a usual modern private house of a middle class is resulted. The conclusion about the economic expediency of construction of small and average individual peasant cottage from local natural materials is made. The first is the ability to use available local materials at low prices. Secondly - the ability to independently perform a significant amount of simple construction work. Third - high energy efficiency and environmental safety of such a building. Fourth - a fairly high fire safety, durability and mechanical stability of building structures when applying the necessary protective measures. The integration of such buildings into modern the planning structure will diversify the architectural environment and create the national color of Ukrainian villages and towns.

  • Open Access

    ARCHITECTURAL AND PLANNING TRENDS IN THE FORMATION OF RECREATIONAL COMPLEXES IN SUBURBAN AREAS ON THE EXAMPLE OF SUMY REGION

    by Dmytro Boroday, Artem Boroday, Serhii Boroday, Yana Boroday, Дмитро Бородай, Сергій Бородай, Яна Бородай

    The article is devoted to the formation of recreational facilities in the structure of suburban areas, which are favorable for the development of recreational and tourist activities. The main preconditions and factors influencing the formation of certain types of institutions are studied. The main architectural and planning features of recreational facilities are identified. The main architectural techniques for the formation of recreational institutions are determined. Such techniques are the pavilion and block-pavilion structure. The main functional groups of the premises of the recreational complexes have been determined. The main groups of premises include: summer residential buildings, sports and recreation facilities, cultural and social facilities, catering facilities. The optimal natural conditions for the formation of recreational institutions in the Sumy region have been determined. A study of natural and recreational resources of the Lebedyn district in Sumy region is conducted. It is established that in this area there are optimal conditions for the formation of recreational facilities. Taking into account certain natural conditions and factors, the concept of the project solution of the recreational and recreational complex in the Lebedyn district of Sumy region is proposed. The complex is proposed to be designed in the coastal zone of the river Psel. The methods of urban planning, architectural planning and compositional solutions that are optimal for a given area were established in the process of project search. These techniques include: the reception of accommodation in a suburban recreational area, the reception of a combined compositional planning organization, the reception of folk (traditional) Ukrainian architecture in combination with modern structural systems.