VLV. V. Lebed’

V. V. Lebed’

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


V. V. Lebed’ has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of Heat Loads and Lining Wear of Blast-Furnace Crucible of Various Designs

    by B. Kornilov, O. Chaika, O. Merkulov, Y. Shumelchyk, V. Lebed, A. Moskalina

    The article presents the results of analysis of thermal operation and hearth lining melting of blast furnaces of various designs on the basis of information from the system of monitoring of thermal operation and hearth lining melting – mathematical model “Hearth” developed in Iron and Steel Institute NAS of Ukraine (ISI NASU). Realization of continuous monitoring of the hearth melting in blast furnaces made it possible to estimate the effect of using “ceramic cup” in terms of the value of heat losses of the hearth and coke consumption for their compensation. It is established that the value of specific heat loss per unit volume of blast furnace in blast furnaces with a “ceramic cup” ~ 0,4-0,7 kW/m3, in blast furnaces without it ~0,9-1,1 kW/m3. Ceramic cup gives savings of about 1 kg/t-HM of coke.

  • Open Access

    ПЕРСПЕКТИВИ ВИКОРИСТАННЯ ВОДНЮ ТА ВОДНЕВМІСНИХ ДОБАВОК ДЛЯ ЗМЕНШЕННЯ ВИКИДІВ СО2 І ПОКРАЩЕННЯ ПОКАЗНИКІВ ДОМЕННОЇ ПЛАВКИ

    by О. Чайка, Б. Корнілов, І. Муравйова, А. Москалина, В. Лебідь, М. Іванча, O. Chaika, B. Kornilov, I. Myravyova, V. Lebid, et al.

    Вступ. Глобальне потепління наразі є однією з найважливіших проблем людства, домінуючою причиною якого є антропогенний фактор — суттєве збільшення кількості парникових газів. Зважаючи на вкрай негативні наслідки цього процесу в майбутньому 195 країн світу, серед яких і Україна, у 2015 р. ратифікували Паризьку угоду щодо клімату, яка зобов’язує зменшити викиди СО2, зокрема, в металургії, де ці показники надвисокі — у світі — 6 %, в Україніна початок 2022 р. — 26 %.Проблематика. За прогнозами Міжнародного Енергетичного Агентства до 2050 р. доменне виробництво буде домінуючою ланку у сталеварінні з тепловим коефіцієнтом корисної дії понад 90 %. Впровадження нових технологій одержання сталі може призвести до зменшення традиційного способу виробництва сталі на 50 % до 2050 року лишеза умови значних інвестицій.Мета. Дослідження впливу використання водневмісного палива в доменній печі на емісію діоксиду вуглецю татехніко-економічні показники доменної плавки.Матеріали й методи. Для оцінки потенціалу використання водню та водневмісного палива в доменній печі на викиди СО2 та техніко-економічні показники доменної плавки виконано розрахунки з використанням розробленої в Інституті чорної металургії НАН України математичної моделі повного енергетичного балансу доменної плавки.Результати. Виконано аналіз та встановлено закономірності впливу водню та водневмісних паливних добавок на рівень викидів СО2 та показники роботи доменної печі — виробництво чавуну, витрату коксу, вихід вторинних енергоресурсів. Визначено критичні витрати паливних добавок, за яких очікується досягнення повного відновлення заліза непрямим шляхом. Визначено коефіцієнт заміни коксу коксовим газом та воднем.Висновки. Доведено ефективність використання водню та водневмісного палива окремо та спільно з пиловугільним паливом, що є перспективним шляхом, який дозволить раціонально підходити до вибору режиму роботи доменної печі з точки зору екологічності (зниження викидів СО2) та економічної доцільності.


  • Research of the influence of technologies using PCI, natural and coke over gas on the decarbonization of the blast furnace production

    by O. L. Chaika, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, B. V. Kornilov, A. O. Moskalyna, O. Ye. Merkulov, V. V. Lebed, M. M. Izumskyi

    The purpose of the work is to establish the patterns of use of various fuel additives aimed at reducing carbon dioxide emissions from the blast furnace. In connection with global warming and related negative consequences in the future, the issue of reducing greenhouse gases (including CO2) is one of the most important in the world. Thus, the issue of decarbonization of the metallurgical industry of Ukraine, which accounts for about 26% of emissions, is urgent. In Ukraine during steel production, CO2 emissions are ~8% higher than in EU countries, which is primarily due to the fact that the energy intensity of blast furnace production technology in Ukraine is greater. Therefore, with the introduction of quotas for CO2 emissions (EU ETS), without the introduction of blast furnace decarbonization technologies, Ukrainian metallurgy may become uncompetitive. With the use of improved thermal energy and exergy models of blast furnace smelting, regularities were established when using PCI (as the most economical substitute for coke), natural and coke over gas for CO2 emissions and technical and economic indicators of blast furnace smelting. The best period of operation of blast furnace No. 4 with a volume of 2002 m3 of PJSC "MK "Azovstal" in 2021 was chosen as the basic calculation option. The regularities of the effect of the use of different grades of coal for pulverized coal injection (PCI) and changes in the chemical composition of PCI while maintaining the theoretical combustion temperature at a constant level on CO2 emissions and blast furnace smelting indicators have been established, which will allow a rational approach to the choice of coal for PCI, which is especially relevant in wartime and the post-war recovery of Ukraine in the conditions of the loss of the coal energy base for PCI. For the first time, the critical consumption of fuel additives was determined, at which, according to Gruner's principle, it is expected to achieve full recovery of iron by indirect means, and therefore minimum fuel consumption when reaching rd close to 0%. As a result of the work performed, the limit values of the effectiveness of the use of PCI, natural and coke gas injection technologies on carbon dioxide emissions, output of secondary energy resources and coke consumption were established.


  • Implementation of mathematical models of material and heat balances of blast furnace smelting as part of the ACS TP of PJSC "MK "Azovstal"

    by O. L. Chaika, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, B. V. Kornilov, V. V. Lebid, A. O. Moskalyna, Ye. I. Shumelchyk, M. H. Dzhyhota

    On the basis of blast furnace operation data of PJSC "MK "Azovstal", an information system has been developed, which is based on mathematical models of material and heat balances of blast furnace smelting developed at the Institute of Ferrous Metallurgy of the National Academy of Sciences of Ukraine. The calculation of the material balance is carried out according to the "accounting system" of V. P. Izhevskii. The thermal energy model of I. D. Semikin is used to calculate the heat balance, which was developed for use in blast furnace production by O. V. Borodulin. The article describes the information system of calculating mathematical models. The information system allows you to calculate balances in automatic mode (collection of data from automatic control system of technological process (ACS TP) and calculation of material and heat balances for the selected period) and in manual mode (calculation of forecast periods to determine reserves for increasing the energy efficiency of blast furnace smelting). The models were adapted by calculating the material and heat balances of blast furnace melting and determining the inconsistencies. Monthly calculations of the material and heat balances of the blast furnaces were performed to adapt the models installed in the ACS TP of the blast furnace workshop of PJSC "MK "Azovstal". Inconsistencies in the overall material balances of the furnaces (the difference between the total input of materials into the furnace and smelting products) and by components (iron, carbon, etc.) were determined. It was established that when using the estimated amount of blast furnace dust at all blast furnaces of PJSC "MK "Azovstal", the amount of discrepancy between the arrival and consumption of materials lies within the credible range of error (<1,5%). Using the results of the calculation of heat balances, a comparison of the Inconsistencies of the blast furnaces was made (the ratio of the calculated indicators to the actual ones). Mathematical models of balances were implemented as part of the ACS TP of the blast furnace workshop of PJSC "MK "Azovstal" and were used to assess deviations from production norms, consumption of coke and conventional fuel, as well as forecast the possibility of improving the technical and economic indicators of smelting.

  • THE THERMAL WORK ANALYSIS OF THE FIREPLACES OF BLAST FURNACES OF UKRAINE OF VARIOUS DESIGNS

    by Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, B. V. Kornilov, O. L. Chaika, V. V. Lebid, Ye. I. Shumelchyk, A. O. Moskalina

    The aim of the work is to study modern ways to increase the operational reliability of the furnace and hearth of blast furnaces, which largely determine the duration of the blast furnace campaign. The article analyzes the ways to increase the stability of the furnace and hearth, presents the results of the analysis of thermal work and ignition of the lining of metal receivers of blast furnaces of different designs. The modern directions of construction of the metal receiver of blast furnaces are determined. It is shown that the modern methodology of construction of blast furnace furnaces develops two main directions: the use of a coordinated combination of refractory materials with a cooling system; use of a combination of wear-resistant materials based on carbon and ceramics. However, even the improvement of the design and cooling system of the metal receiver does not allow to fully increase the duration of the campaign. To assess the service life of the furnace, it is necessary to provide regular automated control of the ignition of the furnace lining and hearth. In Ukraine, during the renovation of blast furnaces, the design of metal receivers with the use of "ceramic glass" was preferred. To date, the system of monitoring the thermal work and ignition of the furnace has been implemented in 10 blast furnaces using the automatic control system "Horn" developed by the HMI NASU. The implementation of continuous control over the ignition of the furnace in blast furnaces allowed us to assess the effect of the use of ceramic cups. The value of heat losses of the furnace and the cost of coke for their compensation are estimated. Methods and models for determining the thermal state and wear of the metal receiver lining based on a combination of calorimetric and thermometric control methods have been developed. Comparison of heat losses of the metal receiver in the cooling system of blast furnaces allows to quantify the thermal performance of controlled areas and the furnace as a whole. It is shown that the specific value of heat loss of the metal receiver per unit volume of the blast furnace can serve as an integral parameter. It is established that the value of specific heat losses per unit volume of the blast furnace with a ceramic cup is ~ 0.4-0.7 kW/m3, which is much less than blast furnaces without it (~ 0.9-1.1 kW/m3). Ceramic glass saves coke about 1 kg/t of cast iron.

  • Heat power analysis of performance indicators blast furnace No. 3 PJSC «AZOVSTAL IRON & STEEL WORKS» with natural gas and pulverized coal after oven overhaul of blast furnace

    by A.L. Chaika, B.V. Kornilov, A.A. Moskalina, V.V Lebed, M.G. Dzhigota, S.A. Karikov

    In 2019, according to the technological assignment of the Iron and Steel Institute (ISI), the reconstruction of the blast furnace (BF) No. 3 of PJSC «AZOVSTAL IRON & STEEL WORKS» was carried out for the long-term energy-efficient production of pig iron with using pulverized coal (PCI) up to 180 kg/t with a change in the profile according to the technological task of ISI. The design of the BF No. 3 profile corresponds to the best world solutions for furnaces efficiently working with pulverized coal, and the furnace was equipped with five mathematical models of ISI («Horn», «Mine», «Heat losses», «Loading», «Slag»). Specialists of ISI developed recommendations and carried out technological support for the operation of BF No.3, which made it possible to increase the removal of pig iron from the design 2.1 t/m3 to 2.27 t/m3 and achieved the best indicators in the blast furnace workshop in terms of coke and equivalent fuel consumption by increasing the productivity of the burden system, using a rational burden loading matrix, using a rational pressure drop in the furnace, which allows the maximum use of the power of the blower machine, forcing the furnace with technical oxygen and other measures. Using the heat power model of I.D. Semikin was made a comparative analysis of the best for six months indicators of thermal performance and technical and economic indicators of BF №3 of PJSC «AZOVSTAL IRON & STEEL WORKS», with a volume of 1800 m3 before (work with natural gas) and after major repairs (work with pulverized coal and with natural gas). Using the exergy method of analysis based on the results of calculating heat and power balances, a comparative analysis of changes in the energy efficiency and environmental indicators of BF No. 3 before and after its major repairs was carried out. It shown the expediency of integrated mastering of operating modes and modernization of the blast furnace for long-term and energy-efficient operation with pulverized coal. It disclosed the mechanism for improving the technical and economic indicators of work after major repairs by changing the heat and power conditions of the blast furnace. Its shown Improvement of exergy efficiency factor and environmental performance of BF No. 3 after major repairs.

  • Heat Losses in the Cooling System and Consumption of Coke to Compensate for Them in Blast Furnaces of Various Volumes

    by A. L. Chaika, V. V. Lebed’, K. S. Tsyupa, V. Yu. Shostak, B. V. Kornilov, A. A. Zherebetskii, A. A. Sokhatskii


  • Investigation of the Influence of the Technology of Blast-Furnace Smelting with the Use of Pulverized Coal Fuel and Natural Gas on the Performance Indicators of Blast Furnaces

    by A. L. Chaika, A. A. Sokhatskii, L. E. Vasil’ev, A. V. Sushchenko, V. V. Lebed’, A. A. Moskalina, B. V. Kornilov