Emil Kupiec
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Emil Kupiec has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Lech Marian Grzesiak
Institute of Control and Industrial Electronics, Warsaw University of Technology, Warsaw, Poland
4 shared publications - Michal Gierczynski
Institute of Control and Industrial Electronics, Warsaw University of Technology, Warsaw, Poland
4 shared publications - Rafal Jakubowski
Institute of Control and Industrial Electronics, Warsaw University of Technology, 00-662 Warsaw, Poland
4 shared publications - Maciej Jaworski
Institute of Heat Engineering, Warsaw University of Technology, 00-665 Warsaw, Poland
3 shared publications - Mirosław Seredyński
Warsaw University of Technology
3 shared publications - Lukasz Jan Niewiara
Institute of Engineering and Technology, Nicolaus Copernicus University in Torun, Toru, Poland
2 shared publications
Latest Publications
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (11) , 10962-10973
Torque Control of a Highly-Saturated IPMSM Drive Using the Flux Linkage Control Scheme and an Augmented-State-Feedback Controller
Torque control performance is essential in propulsion control systems, especially in automotive applications. Together with torque maximization, it becomes a desirable feature to ensure efficient operation of the drive system. At high power density, the phenomenon of self and cross-saturation occurs in the controlled machine, revealing torque and performance deterioration if not considered. Hence, this article proposes a novel approach for torque control of an interior permanent magnet synchronous motor (IPMSM) based on an augmented state-feedback controller (ASFC) with flux-linkage control. The proposed approach, in contrast to classical PI-based current control systems, allows for simplification of the plant’s mathematical description. As a result, a stationary, linear controller may be designed. The mathematical model of the assumed machine (Toyota Prius 4rd generation) is provided with a torque maximization approach. The ASFC structure and synthesis procedure are discussed in detail. The experimental results indicate excellent torque tracking performance and wide torque control bandwidth of the proposed ASFC.
- 21 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (11) , 10962-10973
Torque Control of a Highly-Saturated IPMSM Drive Using the Flux Linkage Control Scheme and an Augmented-State-Feedback Controller
Torque control performance is essential in propulsion control systems, especially in automotive applications. Together with torque maximization, it becomes a desirable feature to ensure efficient operation of the drive system. At high power density, the phenomenon of self and cross-saturation occurs in the controlled machine, revealing torque and performance deterioration if not considered. Hence, this article proposes a novel approach for torque control of an interior permanent magnet synchronous motor (IPMSM) based on an augmented state-feedback controller (ASFC) with flux-linkage control. The proposed approach, in contrast to classical PI-based current control systems, allows for simplification of the plant’s mathematical description. As a result, a stationary, linear controller may be designed. The mathematical model of the assumed machine (Toyota Prius 4rd generation) is provided with a torque maximization approach. The ASFC structure and synthesis procedure are discussed in detail. The experimental results indicate excellent torque tracking performance and wide torque control bandwidth of the proposed ASFC.
- Open Access
Identification of the Parameters of the Highly Saturated Permanent Magnet Synchronous Motor (PMSM): Selected Problems of Accuracy
Machines with highly saturated magnetic circuits are utilized to maximize drive efficiency. However, their control is non-trivial due to highly non-linear characteristics, and therefore, an accurate parameter identification procedure is crucial. This paper presents and validates a comprehensive flux linkage identification procedure. Several steps needed for accurate parameter identification and their influence on the estimation results are described. The impact of all main parts of the electrical drive, i.e., dead times introduced between switching off and switching on the power transistors, phase delay from the current low-pass filters, delay from the control system, and misalignment of the axis angle due to the machine asymmetries is considered and partially eliminated. An improved identification procedure with the look-up table-based dead time compensation and estimation of equivalent circuit resistance is applied to estimate the parameters of the highly saturated PMSM traction machine from the fourth generation of the Toyota Prius, and the obtained results are compared with a Finite Element Method-based model of this machine. Finally, dynamic test results are conducted to prove the proposed approach’s accuracy.Open AccessIdentification of the Parameters of the Highly Saturated Permanent Magnet Synchronous Motor (PMSM): Selected Problems of Accuracy
Machines with highly saturated magnetic circuits are utilized to maximize drive efficiency. However, their control is non-trivial due to highly non-linear characteristics, and therefore, an accurate parameter identification procedure is crucial. This paper presents and validates a comprehensive flux linkage identification procedure. Several steps needed for accurate parameter identification and their influence on the estimation results are described. The impact of all main parts of the electrical drive, i.e., dead times introduced between switching off and switching on the power transistors, phase delay from the current low-pass filters, delay from the control system, and misalignment of the axis angle due to the machine asymmetries is considered and partially eliminated. An improved identification procedure with the look-up table-based dead time compensation and estimation of equivalent circuit resistance is applied to estimate the parameters of the highly saturated PMSM traction machine from the fourth generation of the Toyota Prius, and the obtained results are compared with a Finite Element Method-based model of this machine. Finally, dynamic test results are conducted to prove the proposed approach’s accuracy. - Open Access
Modeling of the Fourth-Generation Toyota Prius Traction Machine as the Reference for Future Designs
The automotive market is very competitive and demands consistently improving the technologies used and reducing the product cost and dimensions with each product model iteration. Hence, it is important to have access to well-defined reference designs of high-quality products to evaluate new ideas and technologies. This paper provides readers with a numerical model of such a high-quality product, i.e., the IPMSM-type traction motor from the fourth generation of the Toyota Prius hybrid transaxle. The presented results also serve for a discussion regarding the design decisions of the Toyota engineers and the applicability of the linearized machine model for the approximated torque calculations. In the introductory section, a brief history of the Prius model and references to the reverse engineering reports are given. Afterward, the machine dimensions, material properties, and winding configuration are described. Then, the model is validated with the torque measurements at constant speed. The simulation results are presented in the next chapters, and the numerical source data are supplied to the reader. Finally, the design philosophy of the Toyota drive is briefly discussed in comparison with the BMWi3 drive and the results are concluded in the last section.
Open AccessModeling of the Fourth-Generation Toyota Prius Traction Machine as the Reference for Future Designs
The automotive market is very competitive and demands consistently improving the technologies used and reducing the product cost and dimensions with each product model iteration. Hence, it is important to have access to well-defined reference designs of high-quality products to evaluate new ideas and technologies. This paper provides readers with a numerical model of such a high-quality product, i.e., the IPMSM-type traction motor from the fourth generation of the Toyota Prius hybrid transaxle. The presented results also serve for a discussion regarding the design decisions of the Toyota engineers and the applicability of the linearized machine model for the approximated torque calculations. In the introductory section, a brief history of the Prius model and references to the reverse engineering reports are given. Afterward, the machine dimensions, material properties, and winding configuration are described. Then, the model is validated with the torque measurements at constant speed. The simulation results are presented in the next chapters, and the numerical source data are supplied to the reader. Finally, the design philosophy of the Toyota drive is briefly discussed in comparison with the BMWi3 drive and the results are concluded in the last section.
- Open Access
- 14 August 2024
- Published by MDPI AG in Preprints.org
Modeling of the 4th Generation Toyota Prius Traction Machine as the Reference for Future Designs
The automotive market is very competitive and presents a demand for the consistent improvement of the used technologies and reduction of the product cost and dimensions with each product model iteration. Hence, it is important to have access to well-defined reference designs of high quality products, in order to evaluate the new ideas and technologies. This paper provides the readers with a numerical model of such a high quality product, i.e., the IPMSM type traction motor from the 4th generation of the Toyota Prius hybrid transaxle. In the introductory section, the brief history of the Prius model is given together with the references to the reverse engineering reports. Afterwards, the machine dimensions, material properties and winding configuration are described. Then, the model is validated with the torque measurements at constant speed. In the next chapters the simulation results are presented and the numerical source data are supplied to the reader. Finally, the design philosophy of the Toyota drive is briefly discussed in comparison with the BMWi3 drive and the results are concluded in the last section.
- 14 August 2024
- Published by MDPI AG in Preprints.org
Open AccessModeling of the 4th Generation Toyota Prius Traction Machine as the Reference for Future Designs
The automotive market is very competitive and presents a demand for the consistent improvement of the used technologies and reduction of the product cost and dimensions with each product model iteration. Hence, it is important to have access to well-defined reference designs of high quality products, in order to evaluate the new ideas and technologies. This paper provides the readers with a numerical model of such a high quality product, i.e., the IPMSM type traction motor from the 4th generation of the Toyota Prius hybrid transaxle. In the introductory section, the brief history of the Prius model is given together with the references to the reverse engineering reports. Afterwards, the machine dimensions, material properties and winding configuration are described. Then, the model is validated with the torque measurements at constant speed. In the next chapters the simulation results are presented and the numerical source data are supplied to the reader. Finally, the design philosophy of the Toyota drive is briefly discussed in comparison with the BMWi3 drive and the results are concluded in the last section.
- Open Access
- 1 March 2015
- Published by Walter de Gruyter GmbH in Archives of Electrical Engineering
- Vol. 64 (1) , 107-117
Magnetic equivalent circuit model for unipolar hybrid excitation synchronous machine
Details var a2a_config = a2a_config || {}; a2a_config.onclick = 1; a2a_config.locale = "pl"; a2a_config.color_main = "D7E5ED"; a2a_config.color_border = "9D9D9D"; a2a_config.color_link_text = "ffffff"; a2a_config.color_link_text_hover = "ffffff"; a2a_config.color_bg = "d9d9d9"; a2a_config.icon_color = "#4e4e4e"; a2a_config.exclude_services = ["dihitt", "delicious", "whatsapp", "dzone", "sms", "stumpedia", "viber", "yahoo_messenger", "google_plus"]; Details PDF BIBTEX RIS Title Magnetic equivalent circuit model for unipolar hybrid excitation synchronous machine Journal title Archives of Electrical Engineering Yearbook 2015 Volume vol. 64 Issue No 1 March Authors Kupiec, Emil ; Przyborowski, Włodzimierz Keywords hybrid excitation ; magnetic equivalent circuit ; synchronous machine Divisions of PAS Nauki Techniczne Coverage 107-117 Publisher Polish Academy of Sciences Date 2015[2015.01.01 AD - 2015.12.31 AD] Type Artykuły / Articles Identifier DOI: 10.1515/aee-2015-0010 ; ISSN: 1427-4221 ; eISSN: 2300-2506 Source Archives of Electrical Engineering; 2015; vol. 64; No 1 March; 107-117 References Spooner (1989), Hybrid excitation of AC and DC machines Conference on Electrical Machines and Drives pp, Fourth International, 89. ; Amara (2009), Hybrid excitation synchronous machines : energy - efficient solution for vehicles propulsion on Vehicular Technology, IEEE Trans, 5, 2137. ; Tapia (2003), Consequent - pole permanent - magnet machine with extended field - weakening capability on Industry Applications, IEEE Trans, 39, 1704. ; Amara (2011), Comparison of open circuit flux control capability of a series double excitation machine and a parallel double excitation machine on Vehicular Technology, IEEE Trans, 9, 4194. ; May (2011), Modified concept of permanent magnet excited synchronous machines with improved highs - peed features of, Archives Electrical Engineering, 4, 531. ; Vido (2005), Homopolar and bipolar hybrid excitation synchronous machines International Conference on Electric Machines and Drives pp, IEEE, 1212. ; Wróblewski (2010), Reluctance generator with hybrid excitation and selected characteristics of steady - state work in Polish, Electrical Review, 12, 267. ; Hańczewski (2007), Hybrid synchronous machine with permanent magnet s commutator structure and stationery excited internal flux Poznan University of Technology Academic Jurnals, Electrical Engineering, 113.
- 1 March 2015
- Published by Walter de Gruyter GmbH in Archives of Electrical Engineering
- Vol. 64 (1) , 107-117
Open AccessMagnetic equivalent circuit model for unipolar hybrid excitation synchronous machine
Details var a2a_config = a2a_config || {}; a2a_config.onclick = 1; a2a_config.locale = "pl"; a2a_config.color_main = "D7E5ED"; a2a_config.color_border = "9D9D9D"; a2a_config.color_link_text = "ffffff"; a2a_config.color_link_text_hover = "ffffff"; a2a_config.color_bg = "d9d9d9"; a2a_config.icon_color = "#4e4e4e"; a2a_config.exclude_services = ["dihitt", "delicious", "whatsapp", "dzone", "sms", "stumpedia", "viber", "yahoo_messenger", "google_plus"]; Details PDF BIBTEX RIS Title Magnetic equivalent circuit model for unipolar hybrid excitation synchronous machine Journal title Archives of Electrical Engineering Yearbook 2015 Volume vol. 64 Issue No 1 March Authors Kupiec, Emil ; Przyborowski, Włodzimierz Keywords hybrid excitation ; magnetic equivalent circuit ; synchronous machine Divisions of PAS Nauki Techniczne Coverage 107-117 Publisher Polish Academy of Sciences Date 2015[2015.01.01 AD - 2015.12.31 AD] Type Artykuły / Articles Identifier DOI: 10.1515/aee-2015-0010 ; ISSN: 1427-4221 ; eISSN: 2300-2506 Source Archives of Electrical Engineering; 2015; vol. 64; No 1 March; 107-117 References Spooner (1989), Hybrid excitation of AC and DC machines Conference on Electrical Machines and Drives pp, Fourth International, 89. ; Amara (2009), Hybrid excitation synchronous machines : energy - efficient solution for vehicles propulsion on Vehicular Technology, IEEE Trans, 5, 2137. ; Tapia (2003), Consequent - pole permanent - magnet machine with extended field - weakening capability on Industry Applications, IEEE Trans, 39, 1704. ; Amara (2011), Comparison of open circuit flux control capability of a series double excitation machine and a parallel double excitation machine on Vehicular Technology, IEEE Trans, 9, 4194. ; May (2011), Modified concept of permanent magnet excited synchronous machines with improved highs - peed features of, Archives Electrical Engineering, 4, 531. ; Vido (2005), Homopolar and bipolar hybrid excitation synchronous machines International Conference on Electric Machines and Drives pp, IEEE, 1212. ; Wróblewski (2010), Reluctance generator with hybrid excitation and selected characteristics of steady - state work in Polish, Electrical Review, 12, 267. ; Hańczewski (2007), Hybrid synchronous machine with permanent magnet s commutator structure and stationery excited internal flux Poznan University of Technology Academic Jurnals, Electrical Engineering, 113.