Armin Gharibi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Armin Gharibi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Filippo Costa
Department of Information Engineering, University of Pisa, Pisa, Italy
5 shared publications - Simone Genovesi
Dipartimento di Ingegneria dell’Informazione, University of Pisa, 56122 Pisa, Italy
5 shared publications - André F. Silva
Institute of Systems and Robotics, University of Coimbra, 3030-290 Coimbra, Portugal
2 shared publications - André Perrotta
University of Coimbra, CISUC/LASI – Centre for Informatics and Systems of the University of Coimbra, Department of Informatics Engineering, Portugal
2 shared publications - António César Silva Ferreira
Escola Superior de Biotecnologia, Universidade Católica Portuguesa, 4200-072 Porto, Portugal
2 shared publications - Jorge Carlos Santos Cardoso
University of Coimbra
2 shared publications
Latest Publications
- Open Access
- 18 June 2026
- Published by Springer Nature in Research Square
Unsupervised Representation Learning for Surface Variability Discovery in Natural Cork Stoppers
Quality control of natural cork stoppers is essential in the wine industry, as aesthetic grading dictates market value. Current pricing relies heavily on visual quality, defining market classes ranging from premium “flor” to low-grade “quintos”. While traditional manual inspection is subjective, the application of supervised learning is strictly hindered by the high natural heterogeneity of cork and the unreliability of subjective ground-truth labels. To address this, we shift from rigid classification to an exploratory data analysis approach, proposing an unsupervised representation learning framework based on a Vision Transformer Autoencoder (ViTAE). The model leverages transformer-based feature extraction to obtain rich, multiview embeddings of cork surfaces. Evaluated on a large-scale industrial dataset (80,000 training and 40,000 test samples), the ViTAE latent space was compared against handcrafted descriptors (LBP and HOG) and autoencoder baselines (CAE and VAE). Performance was assessed via internal clustering metrics, statistical significance tests, and computational feasibility for real-time inspection. Results demonstrate that while classical descriptors like HOG produce statistically compact clusters, ViTAE yields a robust feature space with a critical operational advantage: spatial interpretability. Through image reconstruction, ViTAE acts as a visual auditing tool, where the reconstruction behavior naturally highlights atypical structural variations. This establishes ViTAE not merely as an automated classifier, but as a highly descriptive feature extractor capable of mapping raw material variability to support human-in-the-loop quality assessment systems.
- 18 June 2026
- Published by Springer Nature in Research Square
Open AccessUnsupervised Representation Learning for Surface Variability Discovery in Natural Cork Stoppers
Quality control of natural cork stoppers is essential in the wine industry, as aesthetic grading dictates market value. Current pricing relies heavily on visual quality, defining market classes ranging from premium “flor” to low-grade “quintos”. While traditional manual inspection is subjective, the application of supervised learning is strictly hindered by the high natural heterogeneity of cork and the unreliability of subjective ground-truth labels. To address this, we shift from rigid classification to an exploratory data analysis approach, proposing an unsupervised representation learning framework based on a Vision Transformer Autoencoder (ViTAE). The model leverages transformer-based feature extraction to obtain rich, multiview embeddings of cork surfaces. Evaluated on a large-scale industrial dataset (80,000 training and 40,000 test samples), the ViTAE latent space was compared against handcrafted descriptors (LBP and HOG) and autoencoder baselines (CAE and VAE). Performance was assessed via internal clustering metrics, statistical significance tests, and computational feasibility for real-time inspection. Results demonstrate that while classical descriptors like HOG produce statistically compact clusters, ViTAE yields a robust feature space with a critical operational advantage: spatial interpretability. Through image reconstruction, ViTAE acts as a visual auditing tool, where the reconstruction behavior naturally highlights atypical structural variations. This establishes ViTAE not merely as an automated classifier, but as a highly descriptive feature extractor capable of mapping raw material variability to support human-in-the-loop quality assessment systems.
- Open Access
Wireless High Rotational Speed Assessment by Exploiting an RF Sensor Tag System and Equivalent-Time Reconstruction
Rotational speed monitoring is essential in many industrial and electromechanical systems. This paper presents a rotational speed measurement method based on a wireless impedance sensing system leveraging the radio-frequency coupling between a passive resonant tag and a coplanar waveguide (CPW) probe. The sensing mechanism exploits periodic variations in the real part of the probe impedance caused by the relative alignment between the rotating tag and the stationary probe. While the impedance signal is inherently periodic, the usable speed range of sampling-based measurement systems is fundamentally constrained by their acquisition rate. To overcome this limitation without requiring higher-rate instrumentation, an equivalent-time sampling (ETS) reconstruction approach is proposed. Sparse and nonuniform impedance samples collected over multiple revolutions are mapped into an equivalent phase domain and combined to reconstruct the waveform associated with a single rotation period. The method is reader-agnostic in principle, as it only requires time-stamped monitoring of a periodic RF observable at a selected frequency; however, experimental validation in this work is performed using a vector network analyzer (VNA). Experimental results obtained on a rotating platform with speeds ranging from 150 RPM to 4000 RPM demonstrate that the proposed method reduces the mean relative estimation error to below 5% across the full range, compared to errors exceeding 70% for conventional peak-based estimation above 1000 RPM. These results highlight the effectiveness of the ETS approach in extending the operational range of RF impedance-based rotational sensing under severe undersampling conditions. The proposed framework is generalizable to other periodic RF sensing configurations where signal periodicity can be exploited across multiple acquisition cycles.
Open AccessWireless High Rotational Speed Assessment by Exploiting an RF Sensor Tag System and Equivalent-Time Reconstruction
Rotational speed monitoring is essential in many industrial and electromechanical systems. This paper presents a rotational speed measurement method based on a wireless impedance sensing system leveraging the radio-frequency coupling between a passive resonant tag and a coplanar waveguide (CPW) probe. The sensing mechanism exploits periodic variations in the real part of the probe impedance caused by the relative alignment between the rotating tag and the stationary probe. While the impedance signal is inherently periodic, the usable speed range of sampling-based measurement systems is fundamentally constrained by their acquisition rate. To overcome this limitation without requiring higher-rate instrumentation, an equivalent-time sampling (ETS) reconstruction approach is proposed. Sparse and nonuniform impedance samples collected over multiple revolutions are mapped into an equivalent phase domain and combined to reconstruct the waveform associated with a single rotation period. The method is reader-agnostic in principle, as it only requires time-stamped monitoring of a periodic RF observable at a selected frequency; however, experimental validation in this work is performed using a vector network analyzer (VNA). Experimental results obtained on a rotating platform with speeds ranging from 150 RPM to 4000 RPM demonstrate that the proposed method reduces the mean relative estimation error to below 5% across the full range, compared to errors exceeding 70% for conventional peak-based estimation above 1000 RPM. These results highlight the effectiveness of the ETS approach in extending the operational range of RF impedance-based rotational sensing under severe undersampling conditions. The proposed framework is generalizable to other periodic RF sensing configurations where signal periodicity can be exploited across multiple acquisition cycles.
- Open Access
- 27 April 2026
- Published by Elsevier in SSRN Electronic Journal
A Multi-view Self-supervised and Contrastive Framework for Uncertainty-Aware Fuzzy Clustering of Natural Cork Stoppers
Visual classification of natural cork bottle stoppers is a challenging problem due to the high similarity among non-premium aesthetic classes, where boundaries are subjective. Imperceptible variations in texture frequently overlap across categories, making fully supervised solutions expensive and unreliable, particularly when labeled data are scarce or ambiguous. In this context, we propose a data-efficient clustering-based model designed to support exploratory analysis and assist the labeling process by reducing uncertainty through confidence-aware decisions. The proposed framework consists of three stages. First, features are extracted using a Vision Transformer–based autoencoder, capturing both local texture details and global structural information from augmented data images. These latent representations are then refined through contrastive learning, improving discrimination among visually similar samples while preserving semantic structure. Finally, a fuzzy clustering matrix is generated from the refined features, making it suitable for handling uncertainties in industrial quality inspection. Experiments were conducted on real image data acquired from an operational cork stopper manufacturing plant, considering both a fully unsupervised scenario and a complementary supervised scenario in which labels were available for clearly separable classes. Performance was assessed using standard unsupervised clustering indices and Fuzzy Partition Coefficient, as well as supervised metrics such as clustering accuracy, normalized mutual information, and adjusted Rand index. Statistical analyses confirm that the proposed model achieves robust and competitive results when compared with state-of-the-art self-supervised learning approaches, demonstrating its practical relevance for industrial decision support under high uncertainty.
- 27 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA Multi-view Self-supervised and Contrastive Framework for Uncertainty-Aware Fuzzy Clustering of Natural Cork Stoppers
Visual classification of natural cork bottle stoppers is a challenging problem due to the high similarity among non-premium aesthetic classes, where boundaries are subjective. Imperceptible variations in texture frequently overlap across categories, making fully supervised solutions expensive and unreliable, particularly when labeled data are scarce or ambiguous. In this context, we propose a data-efficient clustering-based model designed to support exploratory analysis and assist the labeling process by reducing uncertainty through confidence-aware decisions. The proposed framework consists of three stages. First, features are extracted using a Vision Transformer–based autoencoder, capturing both local texture details and global structural information from augmented data images. These latent representations are then refined through contrastive learning, improving discrimination among visually similar samples while preserving semantic structure. Finally, a fuzzy clustering matrix is generated from the refined features, making it suitable for handling uncertainties in industrial quality inspection. Experiments were conducted on real image data acquired from an operational cork stopper manufacturing plant, considering both a fully unsupervised scenario and a complementary supervised scenario in which labels were available for clearly separable classes. Performance was assessed using standard unsupervised clustering indices and Fuzzy Partition Coefficient, as well as supervised metrics such as clustering accuracy, normalized mutual information, and adjusted Rand index. Statistical analyses confirm that the proposed model achieves robust and competitive results when compared with state-of-the-art self-supervised learning approaches, demonstrating its practical relevance for industrial decision support under high uncertainty.
- Open Access
- 2 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9643
Robotic Hand Localization Enabled by a Fully Passive Tagging System
This study presents a novel, fully passive radiofrequency (RF)-based localization system designed to detect the position of a robotic hand on a flat surface within its tactile range, particularly in scenarios where other sensing systems may face limitations. The system employs U-shaped, chipless resonator tags printed on the surface using a customized conductive ink, together with a coplanar RF probe integrated into the robotic hand, to determine position through impedance variations. Unlike conventional approaches, the proposed method provides a compact, low-cost, and robust solution that is resilient to variations in lighting, dust, and other environmental conditions. The resonator tags are arranged in a structured grid inspired by a Sudoku pattern, enabling both position and orientation detection in the near-field region. The system is fabricated on 3D-printed flexible substrates using a flexible and stretchable conductive ink, and its performance is validated through both electromagnetic simulations and experimental measurements. The results confirm that the proposed approach enables accurate and repeatable two-dimensional localization of the robotic hand under various configurations. This work introduces a scalable, high-precision, and vision-independent sensing platform with strong potential for robotic manipulation in challenging environments.
- 2 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (17) , 9643
Open AccessRobotic Hand Localization Enabled by a Fully Passive Tagging System
This study presents a novel, fully passive radiofrequency (RF)-based localization system designed to detect the position of a robotic hand on a flat surface within its tactile range, particularly in scenarios where other sensing systems may face limitations. The system employs U-shaped, chipless resonator tags printed on the surface using a customized conductive ink, together with a coplanar RF probe integrated into the robotic hand, to determine position through impedance variations. Unlike conventional approaches, the proposed method provides a compact, low-cost, and robust solution that is resilient to variations in lighting, dust, and other environmental conditions. The resonator tags are arranged in a structured grid inspired by a Sudoku pattern, enabling both position and orientation detection in the near-field region. The system is fabricated on 3D-printed flexible substrates using a flexible and stretchable conductive ink, and its performance is validated through both electromagnetic simulations and experimental measurements. The results confirm that the proposed approach enables accurate and repeatable two-dimensional localization of the robotic hand under various configurations. This work introduces a scalable, high-precision, and vision-independent sensing platform with strong potential for robotic manipulation in challenging environments.
- Open Access
- 25 August 2025
- Published by MDPI AG in Electronics
- Vol. 14 (17) , 3381
Radio Frequency Passive Tagging System Enabling Object Recognition and Alignment by Robotic Hands
Robotic hands require reliable and precise sensing systems to achieve accurate object recognition and manipulation, particularly in environments where vision- or capacitive-based approaches face limitations such as poor lighting, dust, reflective surfaces, or non-metallic materials. This paper presents a novel radiofrequency (RF) pre-touch sensing system that enables robust localization and orientation estimation of objects prior to grasping. The system integrates a compact coplanar waveguide (CPW) probe with fully passive chipless RF resonator tags fabricated using a patented flexible and stretchable conductive ink through additive manufacturing. This approach provides a low-cost, durable, and highly adaptable solution that operates effectively across diverse object geometries and environmental conditions. The experimental results demonstrate that the proposed RF sensor maintains stable performance under varying distances, orientations, and inter-tag spacings, showing robustness where traditional methods may fail. By combining compact design, cost-effectiveness, and reliable near-field sensing independent of an object or lighting, this work establishes RF sensing as a practical and scalable alternative to optical and capacitive systems. The proposed method advances robotic perception by offering enhanced precision, resilience, and integration potential for industrial automation, warehouse handling, and collaborative robotics.
- 25 August 2025
- Published by MDPI AG in Electronics
- Vol. 14 (17) , 3381
Open AccessRadio Frequency Passive Tagging System Enabling Object Recognition and Alignment by Robotic Hands
Robotic hands require reliable and precise sensing systems to achieve accurate object recognition and manipulation, particularly in environments where vision- or capacitive-based approaches face limitations such as poor lighting, dust, reflective surfaces, or non-metallic materials. This paper presents a novel radiofrequency (RF) pre-touch sensing system that enables robust localization and orientation estimation of objects prior to grasping. The system integrates a compact coplanar waveguide (CPW) probe with fully passive chipless RF resonator tags fabricated using a patented flexible and stretchable conductive ink through additive manufacturing. This approach provides a low-cost, durable, and highly adaptable solution that operates effectively across diverse object geometries and environmental conditions. The experimental results demonstrate that the proposed RF sensor maintains stable performance under varying distances, orientations, and inter-tag spacings, showing robustness where traditional methods may fail. By combining compact design, cost-effectiveness, and reliable near-field sensing independent of an object or lighting, this work establishes RF sensing as a practical and scalable alternative to optical and capacitive systems. The proposed method advances robotic perception by offering enhanced precision, resilience, and integration potential for industrial automation, warehouse handling, and collaborative robotics.
- 11 March 2025
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 147 (6) , 1-10
Simulation-Guided, Application-Specific Manufacturing of Gecko-Inspired Adhesives
We introduce a simulation-based approach to specify tool trajectories for micromachining the molds that are used to create directional gecko-inspired adhesives. A challenge is that the final feature geometries are different from the corresponding tool-paths. Therefore, the process of designing molds for different applications has previously required empirical iteration. Large plastic strains and sensitivity to material parameters and friction also make it difficult to apply conventional finite element analyses (FEAs), with only approximate agreement between predicted and observed cutting forces. The solution reported here uses a plane-strain FEA specialized for metal working, with a customized material model to accommodate the strain rates and strain hardening effects. The analysis was conducted for wax and soft aluminum molds with a variety of wedge-shaped features. Predicted and measured microscopic feature geometries match to within 2.8%.
- 11 March 2025
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 147 (6) , 1-10
Simulation-Guided, Application-Specific Manufacturing of Gecko-Inspired Adhesives
We introduce a simulation-based approach to specify tool trajectories for micromachining the molds that are used to create directional gecko-inspired adhesives. A challenge is that the final feature geometries are different from the corresponding tool-paths. Therefore, the process of designing molds for different applications has previously required empirical iteration. Large plastic strains and sensitivity to material parameters and friction also make it difficult to apply conventional finite element analyses (FEAs), with only approximate agreement between predicted and observed cutting forces. The solution reported here uses a plane-strain FEA specialized for metal working, with a customized material model to accommodate the strain rates and strain hardening effects. The analysis was conducted for wax and soft aluminum molds with a variety of wedge-shaped features. Predicted and measured microscopic feature geometries match to within 2.8%.
- Open Access
U-TAG: Electromagnetic Wireless Sensing System for Robotic Hand Pre-Grasping
In order to perform complex manipulation and grasp tasks, robotic hands require sensors that can handle increasingly demanding functionality and degrees of freedom. This research paper proposes a radiofrequency sensor that uses a wireless connection between a probe and a tag. A compact and low-profile antenna is mounted on the hand and functions as a probe to read a printed passive resonator on the plastic object being targeted, operating within a pre-touch sensing range. The grasping strategy consists of four stages that involve planar alignment in up-to-down and left-to-right directions between the probe and tag, the search for an appropriate distance from the object, and rotational (angular) alignment. The real and imaginary components of the probe-input impedance are analyzed for different orientation strategies and positioning between the resonator on the object and the probe. These data are used to deduce the orientation of the hand relative to the target object and to determine the optimal position for grasping.
Open AccessU-TAG: Electromagnetic Wireless Sensing System for Robotic Hand Pre-Grasping
In order to perform complex manipulation and grasp tasks, robotic hands require sensors that can handle increasingly demanding functionality and degrees of freedom. This research paper proposes a radiofrequency sensor that uses a wireless connection between a probe and a tag. A compact and low-profile antenna is mounted on the hand and functions as a probe to read a printed passive resonator on the plastic object being targeted, operating within a pre-touch sensing range. The grasping strategy consists of four stages that involve planar alignment in up-to-down and left-to-right directions between the probe and tag, the search for an appropriate distance from the object, and rotational (angular) alignment. The real and imaginary components of the probe-input impedance are analyzed for different orientation strategies and positioning between the resonator on the object and the probe. These data are used to deduce the orientation of the hand relative to the target object and to determine the optimal position for grasping.
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (6) , 7573-7583
Design and Application of a Novel Radio Frequency Wireless Sensor for Pre-Touch Sensing and Grasping of Objects
This paper presents the design and experimental assessment of a novel sensing system for controlling the orientation of a robotic hand in grasping non-metallic objects. This goal is pursued by using a radiofrequency (RF) probe placed on the robotic hand and a printed resonator located on the tagged item. The real and imaginary part of the probe input impedance are exploited to infer the angular orientation and distance between the object and the hand to help in finding the most suitable position for grasping. To assess the proposed design, a thorough experimental investigation has been carried out by using an ad-hoc testing platform mimicking the robotic hand. Two different types of probes have been considered to obtain the proper coupling with the adopted U-shaped ( hair pin ) compact resonator. The set of performed measurements prove that the individuated RF system configuration allows the identification of the relative angular position of the probe and the distance between the probe and the resonator offering advantages compared to others approaches in terms of range and accuracy.
- 29 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (6) , 7573-7583
Design and Application of a Novel Radio Frequency Wireless Sensor for Pre-Touch Sensing and Grasping of Objects
This paper presents the design and experimental assessment of a novel sensing system for controlling the orientation of a robotic hand in grasping non-metallic objects. This goal is pursued by using a radiofrequency (RF) probe placed on the robotic hand and a printed resonator located on the tagged item. The real and imaginary part of the probe input impedance are exploited to infer the angular orientation and distance between the object and the hand to help in finding the most suitable position for grasping. To assess the proposed design, a thorough experimental investigation has been carried out by using an ad-hoc testing platform mimicking the robotic hand. Two different types of probes have been considered to obtain the proper coupling with the adopted U-shaped ( hair pin ) compact resonator. The set of performed measurements prove that the individuated RF system configuration allows the identification of the relative angular position of the probe and the distance between the probe and the resonator offering advantages compared to others approaches in terms of range and accuracy.
- Open Access
FEM and Analytical Modeling of the Incipient Chip Formation for the Generation of Micro-Features
This paper explores the modeling of incipient cutting by Abaqus, LS-Dyna, and Ansys Finite Element Methods (FEMs), by comparing also experimentally the results on different material classes, including common aluminum and steel alloys and an acetal polymer. The target application is the sustainable manufacturing of gecko adhesives by micromachining a durable mold for injection molding. The challenges posed by the mold shape include undercuts and sharp tips, which can be machined by a special diamond blade, which enters the material, forms a chip, and exits. An analytical model to predict the shape of the incipient chip and of the formed grove as a function of the material properties and of the cutting parameters is provided. The main scientific merit of the current work is to approach theoretically, numerically, and experimentally the very early phase of the cutting tool penetration for new sustainable machining and micro-machining processes.
Open AccessFEM and Analytical Modeling of the Incipient Chip Formation for the Generation of Micro-Features
This paper explores the modeling of incipient cutting by Abaqus, LS-Dyna, and Ansys Finite Element Methods (FEMs), by comparing also experimentally the results on different material classes, including common aluminum and steel alloys and an acetal polymer. The target application is the sustainable manufacturing of gecko adhesives by micromachining a durable mold for injection molding. The challenges posed by the mold shape include undercuts and sharp tips, which can be machined by a special diamond blade, which enters the material, forms a chip, and exits. An analytical model to predict the shape of the incipient chip and of the formed grove as a function of the material properties and of the cutting parameters is provided. The main scientific merit of the current work is to approach theoretically, numerically, and experimentally the very early phase of the cutting tool penetration for new sustainable machining and micro-machining processes.