Chuan Zhou
Research Subjects
Chuan Zhou has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
Heguo Li
State Key Laboratory of NBC Protection for Civilian, Beijing 100191, China
3 shared publications- Cheng-An Tao
National University of Defense Technology
2 shared publications Haojie Qin
College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing 100029, China; State Key Laboratory of NBC Protection for Civilian, Beijing 100191, China
2 shared publications- Heguo Li
State Key Laboratory of NBC Protection for Civilian, Institute of Chemical Defense, Beijing 100191, China
2 shared publications - Shouxin Zhang
State Key Laboratory of NBC Protection for Civilian
2 shared publications - Xiaohui Zheng
State Key Laboratory of NBC Protection for Civilian
2 shared publications
Latest Publications
- Open Access
- 12 September 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (18) , 1482
Introducing Molecular Sieve into Activated Carbon to Achieve High-Effective Adsorption for Ethylene Oxide
Presently, ethylene oxide (EtO) is posing a significant threat to both human health and the environment due to occasional or deliberate emissions. However, few works so far have focused on this issue. It is urgent to explore novel and effective technology to protect against the threat of EtO. Herein, a series of AC/ZSM-5 composites were prepared to improve the adsorption performance for EtO, evaluated by dynamic breakthrough experiments. Particularly, the AC/ZSM-20% composite demonstrated a more excellent adsorption capacity of 81.9 mg/g at 25 °C and 50% RH than that of pristine AC and ZSM-5 with 32.5 and 52.3 mg/g, respectively. Moreover, the adsorption capacity of the AC/ZSM-20% composite remained constant even after five adsorption-desorption cycles. The adsorption mechanism of EtO on the composite is further revealed by density functional theory (DFT) calculations.
- 12 September 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (18) , 1482
Open AccessIntroducing Molecular Sieve into Activated Carbon to Achieve High-Effective Adsorption for Ethylene Oxide
Presently, ethylene oxide (EtO) is posing a significant threat to both human health and the environment due to occasional or deliberate emissions. However, few works so far have focused on this issue. It is urgent to explore novel and effective technology to protect against the threat of EtO. Herein, a series of AC/ZSM-5 composites were prepared to improve the adsorption performance for EtO, evaluated by dynamic breakthrough experiments. Particularly, the AC/ZSM-20% composite demonstrated a more excellent adsorption capacity of 81.9 mg/g at 25 °C and 50% RH than that of pristine AC and ZSM-5 with 32.5 and 52.3 mg/g, respectively. Moreover, the adsorption capacity of the AC/ZSM-20% composite remained constant even after five adsorption-desorption cycles. The adsorption mechanism of EtO on the composite is further revealed by density functional theory (DFT) calculations.
- Open Access
Boosted Chemical Protective Properties Using Interface Constructed between Ti3C2Tx MXene and Natural Rubber
Rubbers are extensively applied in chemical protective clothing (CPC) due to their eye-catching anti-penetration of chemicals. However, their impermeability, particularly that of natural rubber (NR), is unsatisfactory. In this work, we demonstrate the facile construction of Ti3C2Tx MXene/NR interface using a plant-scale and feasible method combining latex mixing, emulsion flocculation, and flat-plate vulcanisation. The above crafts achieved a homogeneous dispersion of Ti3C2Tx MXene in the NR matrix in a single layer, thereby constructing a strong interfacial interaction between Ti3C2Tx MXene and NR, which induced the formation of a robust three-dimensional (3D) network in the composite. The anti-swelling capacity of the 3D cross-linked network structure and the layered structure of Ti3C2Tx MXene effectively prolonged the permeation path of toxic chemicals. Compared with pure NR, the nanocomposite with 1 wt% of Ti3C2Tx MXene showed substantially enhanced breakthrough times of toluene, dichloromethane, and concentrated sulfuric acid (increased by 140%, 178.6%, and 92.5%, respectively). Furthermore, its tensile strength, elongation at break, and shore hardness increased by 7.847 MPa, 194%, and 12 HA, respectively. Taken together with the satisfactory anti-permeability, tensile strength, elongation at break, and shore hardness, the resulting Ti3C2Tx MXene/NR nanocomposites hold promise for application to long-term and high-strength CPC in the chemical industry and military fields.
Open AccessBoosted Chemical Protective Properties Using Interface Constructed between Ti3C2Tx MXene and Natural Rubber
Rubbers are extensively applied in chemical protective clothing (CPC) due to their eye-catching anti-penetration of chemicals. However, their impermeability, particularly that of natural rubber (NR), is unsatisfactory. In this work, we demonstrate the facile construction of Ti3C2Tx MXene/NR interface using a plant-scale and feasible method combining latex mixing, emulsion flocculation, and flat-plate vulcanisation. The above crafts achieved a homogeneous dispersion of Ti3C2Tx MXene in the NR matrix in a single layer, thereby constructing a strong interfacial interaction between Ti3C2Tx MXene and NR, which induced the formation of a robust three-dimensional (3D) network in the composite. The anti-swelling capacity of the 3D cross-linked network structure and the layered structure of Ti3C2Tx MXene effectively prolonged the permeation path of toxic chemicals. Compared with pure NR, the nanocomposite with 1 wt% of Ti3C2Tx MXene showed substantially enhanced breakthrough times of toluene, dichloromethane, and concentrated sulfuric acid (increased by 140%, 178.6%, and 92.5%, respectively). Furthermore, its tensile strength, elongation at break, and shore hardness increased by 7.847 MPa, 194%, and 12 HA, respectively. Taken together with the satisfactory anti-permeability, tensile strength, elongation at break, and shore hardness, the resulting Ti3C2Tx MXene/NR nanocomposites hold promise for application to long-term and high-strength CPC in the chemical industry and military fields.
- 29 October 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 655, 23-31
Defective UiO-66 metal–organic gels for optimizing gaseous toluene capture
- 29 October 2023
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 655, 23-31
Defective UiO-66 metal–organic gels for optimizing gaseous toluene capture
- 9 May 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 467
Defective UiO-66-NH2 monoliths for optimizing CO2 capture performance
- 9 May 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 467
Defective UiO-66-NH2 monoliths for optimizing CO2 capture performance
- 7 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 10 (13) , 2113-2125
Recent advances in flexible and wearable chemo- and bio-sensors based on two-dimensional transition metal carbides and nitrides (MXenes)
Due to their excellent hydrophilicity, outstanding conductivity, unique structures, and physicochemical properties, MXenes have become a potential candidate material for flexible and wearable chemo- and bio-sensors.
- 7 March 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 10 (13) , 2113-2125
Recent advances in flexible and wearable chemo- and bio-sensors based on two-dimensional transition metal carbides and nitrides (MXenes)
Due to their excellent hydrophilicity, outstanding conductivity, unique structures, and physicochemical properties, MXenes have become a potential candidate material for flexible and wearable chemo- and bio-sensors.
- Open Access
- 23 June 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (36) , 22125-22130
Synthesis of macroscopic monolithic metal–organic gels for ultra-fast destruction of chemical warfare agents
The potential threat that has originated from chemical warfare agents (CWAs) has promoted the development of advanced materials to enhance the protection of civilian and military personnel. Zr-based metal–organic frameworks (Zr-MOFs) have recently been demonstrated as excellent catalysts for decomposing CWAs, but challenges of integrating the microcrystalline powders of Zr-MOFs into monoliths still remain. Herein, we report hierarchically porous monolithic UiO-66-X xerogels for the destruction of CWAs. We found that the UiO-66-NH2 xerogel with a larger pore size and a higher surface area than the UiO-66-NH2 powder possessed better degradability of 2-chloroethyl ethyl sulfide (2-CEES), which is a sulfur mustard simulant. These UiO-66-X xerogels exhibit outstanding performance for decomposing CWAs. The half-lives of vesicant agent sulfur mustard (HD) and nerve agent O-ethyl S-[2-(diisopropylamino)ethyl] methylphosphonothioate (VX) are as short as 14.4 min and 1.5 min, respectively. This work is, to the best of our knowledge, the first report on macroscopic monolithic UiO-66-X xerogels for ultrafast decomposition of CWAs.
- 23 June 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (36) , 22125-22130
Open AccessSynthesis of macroscopic monolithic metal–organic gels for ultra-fast destruction of chemical warfare agents
The potential threat that has originated from chemical warfare agents (CWAs) has promoted the development of advanced materials to enhance the protection of civilian and military personnel. Zr-based metal–organic frameworks (Zr-MOFs) have recently been demonstrated as excellent catalysts for decomposing CWAs, but challenges of integrating the microcrystalline powders of Zr-MOFs into monoliths still remain. Herein, we report hierarchically porous monolithic UiO-66-X xerogels for the destruction of CWAs. We found that the UiO-66-NH2 xerogel with a larger pore size and a higher surface area than the UiO-66-NH2 powder possessed better degradability of 2-chloroethyl ethyl sulfide (2-CEES), which is a sulfur mustard simulant. These UiO-66-X xerogels exhibit outstanding performance for decomposing CWAs. The half-lives of vesicant agent sulfur mustard (HD) and nerve agent O-ethyl S-[2-(diisopropylamino)ethyl] methylphosphonothioate (VX) are as short as 14.4 min and 1.5 min, respectively. This work is, to the best of our knowledge, the first report on macroscopic monolithic UiO-66-X xerogels for ultrafast decomposition of CWAs.
- Open Access
Preparation and Chemical Protective Clothing Application of PVDF Based Sodium Sulfonate Membrane
Chemical protective clothing (CPC) is major equipment to protect human skin from hazardous chemical warfare agents (CWAs), especially nerve agents and blister agents. CPC performance is mainly dominated by the chemical protective material, which needs to meet various requirements, such as mechanical robustness, protective properties, physiological comfort, cost-effectiveness, and dimensional stability. In this study, polyvinylidene fluoride (PVDF) based sodium sulfonate membranes with different ion exchange capacities (IECs) are prepared simply from low-cost materials. Their mechanical properties, contact angles, permeations, and selectivities have been tested and compared with each other. Results show that membranes with IEC in the range of 1.5–2 mmol g−1 have high selectivities of water vapor permeation over CWA simulant vapor permeation and good mechanical properties. Therefore, PVDF-based sodium sulfonate membranes are potential materials for CPC applications.
Open AccessPreparation and Chemical Protective Clothing Application of PVDF Based Sodium Sulfonate Membrane
Chemical protective clothing (CPC) is major equipment to protect human skin from hazardous chemical warfare agents (CWAs), especially nerve agents and blister agents. CPC performance is mainly dominated by the chemical protective material, which needs to meet various requirements, such as mechanical robustness, protective properties, physiological comfort, cost-effectiveness, and dimensional stability. In this study, polyvinylidene fluoride (PVDF) based sodium sulfonate membranes with different ion exchange capacities (IECs) are prepared simply from low-cost materials. Their mechanical properties, contact angles, permeations, and selectivities have been tested and compared with each other. Results show that membranes with IEC in the range of 1.5–2 mmol g−1 have high selectivities of water vapor permeation over CWA simulant vapor permeation and good mechanical properties. Therefore, PVDF-based sodium sulfonate membranes are potential materials for CPC applications.