Tuğberk Önal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Tuğberk Önal has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Burak Özdemir
MALATYA TURGUT ÖZAL ÜNİVERSİTESİ, HEKİMHAN MEHMET EMİN SUNGUR MESLEK YÜKSEKOKULU
1 shared publication - Erkan Bahçe
Department of Mechanical Engineering, Faculty of Engineering, Inönü University, 44280 Malatya, Türkiye
1 shared publication - Mustafa Yaman
Atatürk Universitesi
1 shared publication Şemsettin Temiz
Mechanical Engineering , İnönü Üniversitesi , Malatya , Türkiye
1 shared publication- Şemsettin Temiz
İnönü Üniversitesi
1 shared publication - Şemsettin Temiz
Mechanical Engineering , İnönü Üniversitesi , Malatya , Türkiye
1 shared publication
Latest Publications
- 12 October 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Effect of core type and thickness on the low-velocity impact behavior of hemp fiber-reinforced bio-based sandwich composites
Sandwich composite structures may be subjected to impact loads, and their impact behavior is strongly influenced by the core material. This study experimentally investigated the low-velocity impact behavior of bio-based sandwich composites with hemp fiber-reinforced epoxy face sheets and balsa wood or agglomerated cork cores, at thicknesses of 5, 10, and 15 mm. Specimens were manufactured using vacuum-assisted resin transfer molding (VARTM) and tested at impact energies of 5, 15, 30, and 40 J, in reference to ASTM D7136. Core type and thickness effects on contact force, displacement, absorbed energy, and damage mode were evaluated using force–displacement curves, energy–time curves, energy profile diagrams, and damage images. Agglomerated cork cores generally produced higher maximum contact force values, whereas balsa cores exhibited higher deformation and energy absorption at high impact energies, with the most significant difference observed at 15 mm. Approximate perforation threshold energies were also estimated, ranging from 5–15 J for the 5 mm specimens to 30–40 J for the 15 mm balsa-core specimens. By directly comparing these two core types under identical conditions, this study addresses a gap in the current understanding of core-type effects on impact behavior.
- 12 October 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Effect of core type and thickness on the low-velocity impact behavior of hemp fiber-reinforced bio-based sandwich composites
Sandwich composite structures may be subjected to impact loads, and their impact behavior is strongly influenced by the core material. This study experimentally investigated the low-velocity impact behavior of bio-based sandwich composites with hemp fiber-reinforced epoxy face sheets and balsa wood or agglomerated cork cores, at thicknesses of 5, 10, and 15 mm. Specimens were manufactured using vacuum-assisted resin transfer molding (VARTM) and tested at impact energies of 5, 15, 30, and 40 J, in reference to ASTM D7136. Core type and thickness effects on contact force, displacement, absorbed energy, and damage mode were evaluated using force–displacement curves, energy–time curves, energy profile diagrams, and damage images. Agglomerated cork cores generally produced higher maximum contact force values, whereas balsa cores exhibited higher deformation and energy absorption at high impact energies, with the most significant difference observed at 15 mm. Approximate perforation threshold energies were also estimated, ranging from 5–15 J for the 5 mm specimens to 30–40 J for the 15 mm balsa-core specimens. By directly comparing these two core types under identical conditions, this study addresses a gap in the current understanding of core-type effects on impact behavior.
- 29 November 2024
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 67 (1) , 99-110
Impact behavior of natural material-based sandwich composites
Sandwich structures may be exposed to different impact loads depending on their areas of use. In this study, low-speed impact tests were implemented on balsa core sandwich composite materials and impact behaviors were examined. Balsa woods of 4, 6, 8, and 10 mm in thickness were used as core elements. Eight- and 12-layered glass fiber-reinforced composite materials with different orientation arrangements were used for the sandwich structures’ top and bottom surfaces. The fiber orientation angles of the glass fiber materials were determined as [0°]2s and [0°/90°]s. The balsa core sandwich composite materials were produced using the vacuum infusion method. The prepared samples were tested at impact energy of 15, 30, 45, and 60 J. At the end of these tests, the effects of impact energy, core thickness, increase in number of outer surface layers, and change in orientation angle on contact force, displacement, and absorbed energy values were analyzed. The outer surfaces of the damaged samples and the damage patterns that occurred in the balsa wood were examined after the tests.
- 29 November 2024
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 67 (1) , 99-110
Impact behavior of natural material-based sandwich composites
Sandwich structures may be exposed to different impact loads depending on their areas of use. In this study, low-speed impact tests were implemented on balsa core sandwich composite materials and impact behaviors were examined. Balsa woods of 4, 6, 8, and 10 mm in thickness were used as core elements. Eight- and 12-layered glass fiber-reinforced composite materials with different orientation arrangements were used for the sandwich structures’ top and bottom surfaces. The fiber orientation angles of the glass fiber materials were determined as [0°]2s and [0°/90°]s. The balsa core sandwich composite materials were produced using the vacuum infusion method. The prepared samples were tested at impact energy of 15, 30, 45, and 60 J. At the end of these tests, the effects of impact energy, core thickness, increase in number of outer surface layers, and change in orientation angle on contact force, displacement, and absorbed energy values were analyzed. The outer surfaces of the damaged samples and the damage patterns that occurred in the balsa wood were examined after the tests.
- 1 July 2023
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 6 (3) , 229-234
Sıcak Pres CETP Kompozit Panellerin Eğilme Performansları Üzerine Deneysel ve Teorik Çalışmalar
Bu çalışmada, sıcak pres yöntemi ile üretilmiş CETP (Cam elyaf takviyeli polimerler) kompozit panellerin eğilme performansları araştırılmıştır. Bu amaçla cam elyaf ve reçine ile hazırlanmış kompozit plakalar belli bir sıcaklık ve basınç altında preslenerek panellere çevrilmiştir. Üretilen paneller değişken yükler altında çalışan malzemeler olması nedeni ile eğilme testine tabi tutulmuştur. Panellerden 14×150×6 mm3 ebatlarında numuneler alınarak üç nokta eğilme testi uygulamıştır. Deneyin doğrulanması ve gerilme dağılımının görsel olarak incelenebilmesi amacıyla sonlu elemanlar analizi (SEA) yapılmıştır. Çalışma sonunda deneysel ve teorik sonuçlar karşılaştırılmış ve uygulanan yüklerin etkileri tartışılmıştır. Deneylerde en yüksek eğilme gerilmesi 150.39 MPa, SE analizinde ise 164.31 MPa şeklinde gerçekleşmiştir. Malzemenin hasar öncesi deplasmanı deney ve SEA için sırasıyla 4.92 mm ve 5.46 mm’dir. Deney ve SEA sonuçlarının birbirine yakın sonuçlar verdiği görülmüştür. Elde edilen sonuçlar CETP kompozit malzemelerin farklı alanlarda kullanımı öncesi boyut ve mekanik özelliklerin belirlenmesi çalışmalarına destek olacak niteliktedir.
- 1 July 2023
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 6 (3) , 229-234
Sıcak Pres CETP Kompozit Panellerin Eğilme Performansları Üzerine Deneysel ve Teorik Çalışmalar
Bu çalışmada, sıcak pres yöntemi ile üretilmiş CETP (Cam elyaf takviyeli polimerler) kompozit panellerin eğilme performansları araştırılmıştır. Bu amaçla cam elyaf ve reçine ile hazırlanmış kompozit plakalar belli bir sıcaklık ve basınç altında preslenerek panellere çevrilmiştir. Üretilen paneller değişken yükler altında çalışan malzemeler olması nedeni ile eğilme testine tabi tutulmuştur. Panellerden 14×150×6 mm3 ebatlarında numuneler alınarak üç nokta eğilme testi uygulamıştır. Deneyin doğrulanması ve gerilme dağılımının görsel olarak incelenebilmesi amacıyla sonlu elemanlar analizi (SEA) yapılmıştır. Çalışma sonunda deneysel ve teorik sonuçlar karşılaştırılmış ve uygulanan yüklerin etkileri tartışılmıştır. Deneylerde en yüksek eğilme gerilmesi 150.39 MPa, SE analizinde ise 164.31 MPa şeklinde gerçekleşmiştir. Malzemenin hasar öncesi deplasmanı deney ve SEA için sırasıyla 4.92 mm ve 5.46 mm’dir. Deney ve SEA sonuçlarının birbirine yakın sonuçlar verdiği görülmüştür. Elde edilen sonuçlar CETP kompozit malzemelerin farklı alanlarda kullanımı öncesi boyut ve mekanik özelliklerin belirlenmesi çalışmalarına destek olacak niteliktedir.
- 4 May 2023
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 65 (7) , 1056-1068
Experimental and numerical investigation of flexural behavior of balsa core sandwich composite structures
The mechanical properties of bio-core sandwich composite structures fabricated in different configurations were investigated experimentally and numerically in this study. Balsa woods with thicknesses of 4, 6, 8, and 10 mm were used in the core element. Glass fiber/epoxy composites with 8 and 12 layers at [0°]2s, [0/90°]s, and [±45°]s fiber orientation zones were used on the bottom and top surfaces of the sandwich structure. The effects of external surface fiber arrangement variation, the number of layers, and core thickness increase on the flexural damage load of sandwich structures produced by the vacuum infusion method were investigated. For this purpose, a three-point bending test was applied to the sandwich specimens. Maximum damage load values were determined using the three-point bending test performed in accordance with ASTM C-393 standard. Experimental and numerical data were compared with the finite element model created in the ANSYS package program. As a result of the tests, the damaged specimens were visualized and the types of damage to the balsa wood and composite element were determined.
- 4 May 2023
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 65 (7) , 1056-1068
Experimental and numerical investigation of flexural behavior of balsa core sandwich composite structures
The mechanical properties of bio-core sandwich composite structures fabricated in different configurations were investigated experimentally and numerically in this study. Balsa woods with thicknesses of 4, 6, 8, and 10 mm were used in the core element. Glass fiber/epoxy composites with 8 and 12 layers at [0°]2s, [0/90°]s, and [±45°]s fiber orientation zones were used on the bottom and top surfaces of the sandwich structure. The effects of external surface fiber arrangement variation, the number of layers, and core thickness increase on the flexural damage load of sandwich structures produced by the vacuum infusion method were investigated. For this purpose, a three-point bending test was applied to the sandwich specimens. Maximum damage load values were determined using the three-point bending test performed in accordance with ASTM C-393 standard. Experimental and numerical data were compared with the finite element model created in the ANSYS package program. As a result of the tests, the damaged specimens were visualized and the types of damage to the balsa wood and composite element were determined.
- Open Access
- 23 October 2020
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
Balsa Çekirdekli Sandviç Kompozitlerin Darbe Davranışlarının Deneysel Olarak İncelenmesi
En tr Sandwich composites can be exposed to different impact loads depending on their usage areas. The behavior of the structure under impact load is an important parameter in terms of design. In this study, low speed impact test was applied to sandwich structures where 4mm, 6mm, 8mm and 10mm thick balsa woods were used in the core. 8 and 12 layers of glass fiber / epoxy composite materials with an orientation angle of [±45º]s are used on the top and bottom surfaces. The effect of outer layer number and core thickness on impact behavior has been studied experimentally. Low velocity impact tests at 15J, 30J, 45J and 60J energy values were performed on sandwich materials produced by vacuum infusion method. As a result, reaction force-displacement, energy-time and co-energy graphs are examined. It was determined that the contact force increased due to the increase in the number of outer surface layers but the absorbed energy decreased. However, it has been observed that increasing the core thickness increases the energy absorbed in the sandwich structure. Sandviç kompozitler, kullanım alanlarına bağlı olarak farklı darbe yüklerine maruz kalabilmektedir. Yapının darbe yükü altındaki davranışları, tasarım açısından önemli bir parametredir. Bu çalışmada, 4mm, 6mm, 8mm ve 10mm kalınlıktaki balsa odunlarının çekirdekte kullanıldığı sandviç yapılara düşük hızlı darbe testi uygulanmıştır. Alt ve üst yüzeylerde 8 ve12 tabakalı, [±45º]s yönlenme açılı cam elyaf/epoksi kompozit malzemeler kullanılmıştır. Dış yüzey tabaka sayısı ve çekirdek kalınlığının darbe davranışları üzerindeki etkisi deneysel olarak incelenmiştir. Vakum infüzyon yöntemi ile üretilen sandviç malzemelere 15J, 30J, 45J ve 60J enerji değerlerinde düşük hızlı darbe testleri yapılmıştır. Sonuçta, tepki kuvveti-deplasman, enerji-zaman ve eş enerji grafikleri incelenmiştir. Dış yüzey tabaka sayısı artışına bağlı olarak temas kuvvetinin arttığı, fakat absorbe edilen enerjinin azaldığı belirlenmiştir. Bununla birlikte, çekirdek kalınlığının arttırılması sandviç yapıda absorbe edilen enerjiyi arttırdığı gözlemlenmiştir.
- 23 October 2020
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
Open AccessBalsa Çekirdekli Sandviç Kompozitlerin Darbe Davranışlarının Deneysel Olarak İncelenmesi
En tr Sandwich composites can be exposed to different impact loads depending on their usage areas. The behavior of the structure under impact load is an important parameter in terms of design. In this study, low speed impact test was applied to sandwich structures where 4mm, 6mm, 8mm and 10mm thick balsa woods were used in the core. 8 and 12 layers of glass fiber / epoxy composite materials with an orientation angle of [±45º]s are used on the top and bottom surfaces. The effect of outer layer number and core thickness on impact behavior has been studied experimentally. Low velocity impact tests at 15J, 30J, 45J and 60J energy values were performed on sandwich materials produced by vacuum infusion method. As a result, reaction force-displacement, energy-time and co-energy graphs are examined. It was determined that the contact force increased due to the increase in the number of outer surface layers but the absorbed energy decreased. However, it has been observed that increasing the core thickness increases the energy absorbed in the sandwich structure. Sandviç kompozitler, kullanım alanlarına bağlı olarak farklı darbe yüklerine maruz kalabilmektedir. Yapının darbe yükü altındaki davranışları, tasarım açısından önemli bir parametredir. Bu çalışmada, 4mm, 6mm, 8mm ve 10mm kalınlıktaki balsa odunlarının çekirdekte kullanıldığı sandviç yapılara düşük hızlı darbe testi uygulanmıştır. Alt ve üst yüzeylerde 8 ve12 tabakalı, [±45º]s yönlenme açılı cam elyaf/epoksi kompozit malzemeler kullanılmıştır. Dış yüzey tabaka sayısı ve çekirdek kalınlığının darbe davranışları üzerindeki etkisi deneysel olarak incelenmiştir. Vakum infüzyon yöntemi ile üretilen sandviç malzemelere 15J, 30J, 45J ve 60J enerji değerlerinde düşük hızlı darbe testleri yapılmıştır. Sonuçta, tepki kuvveti-deplasman, enerji-zaman ve eş enerji grafikleri incelenmiştir. Dış yüzey tabaka sayısı artışına bağlı olarak temas kuvvetinin arttığı, fakat absorbe edilen enerjinin azaldığı belirlenmiştir. Bununla birlikte, çekirdek kalınlığının arttırılması sandviç yapıda absorbe edilen enerjiyi arttırdığı gözlemlenmiştir.
- 23 April 2015
- Published by SAGE Publications in Journal of Sandwich Structures & Materials
- Vol. 18 (4) , 397-414
Investigation of dynamic properties of natural material-based sandwich composites: Experimental test and numerical simulation
With the development of technology, the use of glass fibres and sandwich structures in a wide variety of engineering applications has had important growth in recent years because of their low self-weight and high strength when compared to conventional materials. Moreover, natural materials can be used as the core material in sandwich structures instead of conventional materials. Since synthetic materials cause a reduction of carbon release during material formation, these kinds of materials are renewable and recyclable. Therefore, in sandwich structures, renewability and recycling can be provided. In this study, dynamic properties of natural material-based sandwich composites were investigated experimentally and numerically. The effects of the thickness of the core and fibre orientation and number of layers on frequency and damping were analysed. It was observed that if the core thickness of the structure is properly optimised, this sandwich structure demonstrates better dynamic properties. Thus, sandwich materials from natural origin may offer more environmental friendly solutions compared to other materials.
- 23 April 2015
- Published by SAGE Publications in Journal of Sandwich Structures & Materials
- Vol. 18 (4) , 397-414
Investigation of dynamic properties of natural material-based sandwich composites: Experimental test and numerical simulation
With the development of technology, the use of glass fibres and sandwich structures in a wide variety of engineering applications has had important growth in recent years because of their low self-weight and high strength when compared to conventional materials. Moreover, natural materials can be used as the core material in sandwich structures instead of conventional materials. Since synthetic materials cause a reduction of carbon release during material formation, these kinds of materials are renewable and recyclable. Therefore, in sandwich structures, renewability and recycling can be provided. In this study, dynamic properties of natural material-based sandwich composites were investigated experimentally and numerically. The effects of the thickness of the core and fibre orientation and number of layers on frequency and damping were analysed. It was observed that if the core thickness of the structure is properly optimised, this sandwich structure demonstrates better dynamic properties. Thus, sandwich materials from natural origin may offer more environmental friendly solutions compared to other materials.