Sun Geun Yoon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sun Geun Yoon has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Matthew T. McDowell
Georgia Institute of Technology
5 shared publications - Youn Sang Kim
Program in Nano Science and Technology, Graduate School of Convergence Science and Technology, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul 08826, Republic of Korea
5 shared publications YoungJun Yang
4 shared publicationsCongcheng Wang
George W. Woodruff School of Mechanical Engineering
3 shared publications- Douglas Lars Nelson
Georgia Institute of Technology
3 shared publications Huding Jin
Program in Nano Science and Technology Graduate School of Convergence Science and Technology Seoul National University Seoul 08826 Republic of Korea
3 shared publications
Latest Publications
- Open Access
- 6 July 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (13) , 130510
Nucleation Phenomena Dictate Temperature-Dependent Lithiation and Fracture Behavior of Alloy Anodes for Lithium-Ion Batteries
Lithium alloy anodes are of great interest for increasing the specific energy of lithium-ion batteries (LIBs) and show potential for expanding operational temperature range due to improved transport and kinetics properties compared to graphite. To enable alloy-based LIBs for low temperature environments, however, the impact of temperature on reaction and degradation processes must be understood. Here, we investigate the relationship between temperature and lithium alloy nucleation and growth phenomena, and we connect resulting (in)homogeneity to fracture processes in these materials. Indium and tin foils are observed to exhibit increased fracture at low temperatures due to differences in stress evolution. Cryogenic focused-ion beam scanning electron microscopy reveals changes in the homogeneity of lithiation, with uniform reaction fronts at low temperatures and inhomogeneous reaction behavior at high temperatures. We show that electrode potential (as influenced by temperature) controls the nucleation behavior of the lithiated indium phase, leading to a shift from growth of isolated nuclei to propagation of uniform reaction fronts. Together, these results establish that the early nanoscale nucleation behavior of lithiated alloy phases dictates the macroscale lithiation behavior, which can then determine fracture of the electrode.
- 6 July 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (13) , 130510
Open AccessNucleation Phenomena Dictate Temperature-Dependent Lithiation and Fracture Behavior of Alloy Anodes for Lithium-Ion Batteries
Lithium alloy anodes are of great interest for increasing the specific energy of lithium-ion batteries (LIBs) and show potential for expanding operational temperature range due to improved transport and kinetics properties compared to graphite. To enable alloy-based LIBs for low temperature environments, however, the impact of temperature on reaction and degradation processes must be understood. Here, we investigate the relationship between temperature and lithium alloy nucleation and growth phenomena, and we connect resulting (in)homogeneity to fracture processes in these materials. Indium and tin foils are observed to exhibit increased fracture at low temperatures due to differences in stress evolution. Cryogenic focused-ion beam scanning electron microscopy reveals changes in the homogeneity of lithiation, with uniform reaction fronts at low temperatures and inhomogeneous reaction behavior at high temperatures. We show that electrode potential (as influenced by temperature) controls the nucleation behavior of the lithiated indium phase, leading to a shift from growth of isolated nuclei to propagation of uniform reaction fronts. Together, these results establish that the early nanoscale nucleation behavior of lithiated alloy phases dictates the macroscale lithiation behavior, which can then determine fracture of the electrode.
- Open Access
- 31 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (1) , 1626-1640
Linking Pressure to Electrochemical Evolution in Solid-State Conversion Cathode Composites
Conversion-type cathodes, such as sulfur, FeS2, and FeF3, offer high theoretical capacities in solid-state lithium batteries but are hindered by substantial volume changes during cycling, leading to interfacial contact loss, crack formation, and microstructural degradation. Here, we investigate the relationships between electrochemical, mechanical, and structural evolution in solid-state electrode composites with these three active materials. Using real-time stack-pressure monitoring, synchrotron X-ray absorption spectroscopy, and electrokinetic modeling, we elucidate how stress evolution is linked to reversible and irreversible redox reactions. Nonlinear stack pressure evolution in cells with sulfur, FeS2, and FeF3 electrode composites is found to arise from material-specific volume changes, the balance of volume change between the working and counter electrode, and the formation of distinct reaction intermediates. The three materials exhibit distinct stack pressure evolution, which is closely related to the different reaction processes in the materials, as demonstrated with X-ray absorption spectroscopy measurements. Through mesoscale modeling, we relate the experimental measurements to species evolution at the particle scale and track the dynamic coexistence of intermediate phases. Our findings highlight the importance of designing for volume changes of a given active material in solid-state battery systems.
- 31 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (1) , 1626-1640
Open AccessLinking Pressure to Electrochemical Evolution in Solid-State Conversion Cathode Composites
Conversion-type cathodes, such as sulfur, FeS2, and FeF3, offer high theoretical capacities in solid-state lithium batteries but are hindered by substantial volume changes during cycling, leading to interfacial contact loss, crack formation, and microstructural degradation. Here, we investigate the relationships between electrochemical, mechanical, and structural evolution in solid-state electrode composites with these three active materials. Using real-time stack-pressure monitoring, synchrotron X-ray absorption spectroscopy, and electrokinetic modeling, we elucidate how stress evolution is linked to reversible and irreversible redox reactions. Nonlinear stack pressure evolution in cells with sulfur, FeS2, and FeF3 electrode composites is found to arise from material-specific volume changes, the balance of volume change between the working and counter electrode, and the formation of distinct reaction intermediates. The three materials exhibit distinct stack pressure evolution, which is closely related to the different reaction processes in the materials, as demonstrated with X-ray absorption spectroscopy measurements. Through mesoscale modeling, we relate the experimental measurements to species evolution at the particle scale and track the dynamic coexistence of intermediate phases. Our findings highlight the importance of designing for volume changes of a given active material in solid-state battery systems.
- Open Access
- 31 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (1) , 581-592
Tracking Interphase Growth at Alloy Anode Interfaces in Sulfide Solid-State Batteries
The chemical stability of solid-state electrolytes (SSEs) in contact with negative electrode materials is essential to enable high performance and safety of solid-state batteries (SSBs). While interphase layers are known to form between Li metal and various sulfide SSEs, there is a lack of understanding of interphase growth in contact with other promising anode materials, such as silicon and aluminum alloys. Here, we track and quantify interphase growth rate, thickness, and composition of various alloy anode thin films in contact with the widely used argyrodite Li6PS5Cl SSE. Using coulometric titration time analysis (CTTA), we find that the average interphase thickness on four alloy anode materials (Ag, Al, Si, and Ge) is less than half that of pure Li metal after 400 h of growth. Furthermore, the interphase growth rate is strongly dependent on the applied stack pressure and varies among the different alloy materials. The interfacial contact area, which is governed by alloy mechanical properties and deformation under stack pressure, is found to be a critical factor in determining interphase growth rate. Time-of-flight secondary-ion mass spectrometry further confirmed thinner and uniform interphase growth on alloy anodes compared to Li metal. This study bolsters our understanding of interfacial stability of various alloy anode materials married with Li6PS5Cl SSE, and it suggests that alloy anodes could exhibit enhanced stability compared to Li in sulfide SSB applications.
- 31 December 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (1) , 581-592
Open AccessTracking Interphase Growth at Alloy Anode Interfaces in Sulfide Solid-State Batteries
The chemical stability of solid-state electrolytes (SSEs) in contact with negative electrode materials is essential to enable high performance and safety of solid-state batteries (SSBs). While interphase layers are known to form between Li metal and various sulfide SSEs, there is a lack of understanding of interphase growth in contact with other promising anode materials, such as silicon and aluminum alloys. Here, we track and quantify interphase growth rate, thickness, and composition of various alloy anode thin films in contact with the widely used argyrodite Li6PS5Cl SSE. Using coulometric titration time analysis (CTTA), we find that the average interphase thickness on four alloy anode materials (Ag, Al, Si, and Ge) is less than half that of pure Li metal after 400 h of growth. Furthermore, the interphase growth rate is strongly dependent on the applied stack pressure and varies among the different alloy materials. The interfacial contact area, which is governed by alloy mechanical properties and deformation under stack pressure, is found to be a critical factor in determining interphase growth rate. Time-of-flight secondary-ion mass spectrometry further confirmed thinner and uniform interphase growth on alloy anodes compared to Li metal. This study bolsters our understanding of interfacial stability of various alloy anode materials married with Li6PS5Cl SSE, and it suggests that alloy anodes could exhibit enhanced stability compared to Li in sulfide SSB applications.
- Top Cited Papers
- 5 June 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 388 (6751) , 1062-1068
Interface morphogenesis with a deformable secondary phase in solid-state lithium batteries
The complex morphological evolution of lithium metal at the solid-state electrolyte interface limits performance of solid-state batteries, leading to inhomogeneous reactions and contact loss. Inspired by biological morphogenesis, we developed an interfacial self-regulation concept in which a deformable secondary phase dynamically aggregates at the interface in response to local electro-chemo-mechanical stimuli, enhancing contact. The stripping of a lithium electrode that contains 5 to 20 mole % electrochemically inactive sodium domains causes spontaneous sodium accumulation across the interface, with the sodium deforming to attain intimate electrical contact without blocking lithium transport. This process, characterized with operando x-ray tomography and electron microscopy, mitigates voiding and improves cycling at low stack pressures. The counterintuitive strategy of adding electrochemically inactive alkali metal to improve performance demonstrates the utility of interfacial self-regulation for solid-state batteries.
- 5 June 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 388 (6751) , 1062-1068
Top Cited PapersInterface morphogenesis with a deformable secondary phase in solid-state lithium batteries
The complex morphological evolution of lithium metal at the solid-state electrolyte interface limits performance of solid-state batteries, leading to inhomogeneous reactions and contact loss. Inspired by biological morphogenesis, we developed an interfacial self-regulation concept in which a deformable secondary phase dynamically aggregates at the interface in response to local electro-chemo-mechanical stimuli, enhancing contact. The stripping of a lithium electrode that contains 5 to 20 mole % electrochemically inactive sodium domains causes spontaneous sodium accumulation across the interface, with the sodium deforming to attain intimate electrical contact without blocking lithium transport. This process, characterized with operando x-ray tomography and electron microscopy, mitigates voiding and improves cycling at low stack pressures. The counterintuitive strategy of adding electrochemically inactive alkali metal to improve performance demonstrates the utility of interfacial self-regulation for solid-state batteries.
- Top Cited PapersOpen Access
- 4 February 2025
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 125 (4) , 2009-2119
Characterizing Electrode Materials and Interfaces in Solid-State Batteries
Solid-state batteries (SSBs) could offer improved energy density and safety, but the evolution and degradation of electrode materials and interfaces within SSBs are distinct from conventional batteries with liquid electrolytes and represent a barrier to performance improvement. Over the past decade, a variety of imaging, scattering, and spectroscopic characterization methods has been developed or used for characterizing the unique aspects of materials in SSBs. These characterization efforts have yielded new understanding of the behavior of lithium metal anodes, alloy anodes, composite cathodes, and the interfaces of these various electrode materials with solid-state electrolytes (SSEs). This review provides a comprehensive overview of the characterization methods and strategies applied to SSBs, and it presents the mechanistic understanding of SSB materials and interfaces that has been derived from these methods. This knowledge has been critical for advancing SSB technology and will continue to guide the engineering of materials and interfaces toward practical performance.
- 4 February 2025
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 125 (4) , 2009-2119
Top Cited PapersOpen AccessCharacterizing Electrode Materials and Interfaces in Solid-State Batteries
Solid-state batteries (SSBs) could offer improved energy density and safety, but the evolution and degradation of electrode materials and interfaces within SSBs are distinct from conventional batteries with liquid electrolytes and represent a barrier to performance improvement. Over the past decade, a variety of imaging, scattering, and spectroscopic characterization methods has been developed or used for characterizing the unique aspects of materials in SSBs. These characterization efforts have yielded new understanding of the behavior of lithium metal anodes, alloy anodes, composite cathodes, and the interfaces of these various electrode materials with solid-state electrolytes (SSEs). This review provides a comprehensive overview of the characterization methods and strategies applied to SSBs, and it presents the mechanistic understanding of SSB materials and interfaces that has been derived from these methods. This knowledge has been critical for advancing SSB technology and will continue to guide the engineering of materials and interfaces toward practical performance.
Verification of Carrier Concentration‐Dependent Behavior in Water‐Infiltration‐Induced Electricity Generation by Ionovoltaic Effect
Water‐infiltration‐induced power generation has the renewable characteristic of generating electrical energy from ambient water. Importantly, it is found that the carrier concentration in semiconductor constituting the energy generator seriously affect the electricity generation. Nevertheless, few studies are conducted on the influence of semiconductor carrier concentration, a crucial factor on electricity generation. Due to this, understanding of the energy harvesting mechanism is still insufficient. Herein, the semiconductor carrier concentration‐dependent behavior in water‐infiltration‐induced electricity generation and the energy harvesting mechanism by ionovoltaic effect are comprehensively verified. A clue to enhance the electric power generation efficiency is also proposed. When 20 µL of water (NaCl, 0.1 m) infiltrates into a porous CuO nanowires film (PCNF), electric power of ≈0.5 V and ≈1 µA are produced for 25 min. Moreover, the PCNF shows good practicability by generating electricity using various ambient water, turning on LEDs, and being fabricated as a curved one.
Verification of Carrier Concentration‐Dependent Behavior in Water‐Infiltration‐Induced Electricity Generation by Ionovoltaic Effect
Water‐infiltration‐induced power generation has the renewable characteristic of generating electrical energy from ambient water. Importantly, it is found that the carrier concentration in semiconductor constituting the energy generator seriously affect the electricity generation. Nevertheless, few studies are conducted on the influence of semiconductor carrier concentration, a crucial factor on electricity generation. Due to this, understanding of the energy harvesting mechanism is still insufficient. Herein, the semiconductor carrier concentration‐dependent behavior in water‐infiltration‐induced electricity generation and the energy harvesting mechanism by ionovoltaic effect are comprehensively verified. A clue to enhance the electric power generation efficiency is also proposed. When 20 µL of water (NaCl, 0.1 m) infiltrates into a porous CuO nanowires film (PCNF), electric power of ≈0.5 V and ≈1 µA are produced for 25 min. Moreover, the PCNF shows good practicability by generating electricity using various ambient water, turning on LEDs, and being fabricated as a curved one.
- 28 November 2018
- Published by Wiley in Advanced Materials
- Vol. 31 (3) , e1806268
A Surface‐Functionalized Ionovoltaic Device for Probing Ion‐Specific Adsorption at the Solid–Liquid Interface
Aqueous ion–solid interfacial interactions at an electric double layer (EDL) are studied in various research fields. However, details of the interactions at the EDL are still not fully understood due to complexity induced from the specific conditions of the solid and liquid parts. Several technical tools for ion–solid interfacial probing are experimentally and practically proposed, but they still show limitations in applicability due to the complicated measurements. Recently, an energy conversion device based on ion dynamics (called ionovoltaic device) was also introduced as another monitoring tool for the EDL, showing applicability as a novel probing method for interfacial interactions. Herein, a monitoring technique for specific ion adsorption (Cu2+ and Pb2+ in the range of 5 × 10−6–1000 × 10−6m) in the solid–liquid interface based on the ionovoltaic device is newly demonstrated. The specific ion adsorption and the corresponding interfacial potentials profiles are also investigated to elucidate a working mechanism of the device. The results give the insight of molecular‐level ion adsorption through macroscopic water‐motion‐induced electricity generation. The simple and cost‐effective detection of the device provides an innovative route for monitoring specific adsorption and expandability as a monitoring tool for various solid–liquid interfacial phenomena that are unrevealed.
- 28 November 2018
- Published by Wiley in Advanced Materials
- Vol. 31 (3) , e1806268
A Surface‐Functionalized Ionovoltaic Device for Probing Ion‐Specific Adsorption at the Solid–Liquid Interface
Aqueous ion–solid interfacial interactions at an electric double layer (EDL) are studied in various research fields. However, details of the interactions at the EDL are still not fully understood due to complexity induced from the specific conditions of the solid and liquid parts. Several technical tools for ion–solid interfacial probing are experimentally and practically proposed, but they still show limitations in applicability due to the complicated measurements. Recently, an energy conversion device based on ion dynamics (called ionovoltaic device) was also introduced as another monitoring tool for the EDL, showing applicability as a novel probing method for interfacial interactions. Herein, a monitoring technique for specific ion adsorption (Cu2+ and Pb2+ in the range of 5 × 10−6–1000 × 10−6m) in the solid–liquid interface based on the ionovoltaic device is newly demonstrated. The specific ion adsorption and the corresponding interfacial potentials profiles are also investigated to elucidate a working mechanism of the device. The results give the insight of molecular‐level ion adsorption through macroscopic water‐motion‐induced electricity generation. The simple and cost‐effective detection of the device provides an innovative route for monitoring specific adsorption and expandability as a monitoring tool for various solid–liquid interfacial phenomena that are unrevealed.
- 1 December 2017
- Published by Elsevier in Nano Energy
- Vol. 42, 257-261
Analysis on characteristics of contact-area-dependent electric energy induced by ion sorption at solid-liquid interface
- 1 December 2017
- Published by Elsevier in Nano Energy
- Vol. 42, 257-261
Analysis on characteristics of contact-area-dependent electric energy induced by ion sorption at solid-liquid interface
- 6 October 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (41) , 36206-36219
Highly Sensitive Piezocapacitive Sensor for Detecting Static and Dynamic Pressure Using Ion-Gel Thin Films and Conductive Elastomeric Composites
A new class of simple and highly sensitive piezocapacitive sensors that are capable of detecting static and dynamic pressure changes is reported. The pressure sensor structure is formed by vertically sandwiching a sandpaper-molded carbon nanotube/poly(dimethylsiloxane) composite (CPC) dielectric layer between two ion-gel thin film electrodes. Such a capacitive sensor system enables the distinguishable detection of directional movement of applied pressure as well as static pressure variation by modulating ion distribution in the ion-gel thin films. The resulting capacitive pressure sensors exhibit high sensitivity (9.55 kPa–1), high durability, and low operating voltage (0.1 V). Our proposed pressure sensors are successfully applied as potential platforms for monitoring human physiological signals and finger sliding motions in order to demonstrate their capability for practical usage. The outstanding sensor performance of the pressure sensors can permit applications in wearable electronic devices for human–machine connecting platforms, health care monitoring systems, and artificial skin.
- 6 October 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (41) , 36206-36219
Highly Sensitive Piezocapacitive Sensor for Detecting Static and Dynamic Pressure Using Ion-Gel Thin Films and Conductive Elastomeric Composites
A new class of simple and highly sensitive piezocapacitive sensors that are capable of detecting static and dynamic pressure changes is reported. The pressure sensor structure is formed by vertically sandwiching a sandpaper-molded carbon nanotube/poly(dimethylsiloxane) composite (CPC) dielectric layer between two ion-gel thin film electrodes. Such a capacitive sensor system enables the distinguishable detection of directional movement of applied pressure as well as static pressure variation by modulating ion distribution in the ion-gel thin films. The resulting capacitive pressure sensors exhibit high sensitivity (9.55 kPa–1), high durability, and low operating voltage (0.1 V). Our proposed pressure sensors are successfully applied as potential platforms for monitoring human physiological signals and finger sliding motions in order to demonstrate their capability for practical usage. The outstanding sensor performance of the pressure sensors can permit applications in wearable electronic devices for human–machine connecting platforms, health care monitoring systems, and artificial skin.