Tracking Interphase Growth at Alloy Anode Interfaces in Sulfide Solid-State Batteries
Open Access
- 31 December 2025
- journal article
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (1) , 581-592
Abstract
The chemical stability of solid-state electrolytes (SSEs) in contact with negative electrode materials is essential to enable high performance and safety of solid-state batteries (SSBs). While interphase layers are known to form between Li metal and various sulfide SSEs, there is a lack of understanding of interphase growth in contact with other promising anode materials, such as silicon and aluminum alloys. Here, we track and quantify interphase growth rate, thickness, and composition of various alloy anode thin films in contact with the widely used argyrodite Li6PS5Cl SSE. Using coulometric titration time analysis (CTTA), we find that the average interphase thickness on four alloy anode materials (Ag, Al, Si, and Ge) is less than half that of pure Li metal after 400 h of growth. Furthermore, the interphase growth rate is strongly dependent on the applied stack pressure and varies among the different alloy materials. The interfacial contact area, which is governed by alloy mechanical properties and deformation under stack pressure, is found to be a critical factor in determining interphase growth rate. Time-of-flight secondary-ion mass spectrometry further confirmed thinner and uniform interphase growth on alloy anodes compared to Li metal. This study bolsters our understanding of interfacial stability of various alloy anode materials married with Li6PS5Cl SSE, and it suggests that alloy anodes could exhibit enhanced stability compared to Li in sulfide SSB applications.Keywords
Funding Information
- National Social Science Fund of China (DMR-2209202)
- National Nanotechnology Coordinated?Infrastructure (NNCI), National Science Foundation (ECCS-2025462)
This publication has 59 references indexed in Scilit:
- In Situ Nanoscale Probing of Lithium‐Aluminum Alloying / De‐Alloying Kinetics and Mechanical Failure in All‐Solid‐State BatteriesAngewandte Chemie International Edition, 2025
- Prelithiation of Alloy Anodes via Roll Pressing for Solid‐State BatteriesAdvanced Materials, 2025
- Evolution of Pore Volume During Stripping of Lithium Metal in Solid‐State Batteries Observed with Operando DilatometrySmall, 2025
- Decoupling the Effects of Interface Chemical Degradation and Mechanical Cracking in Solid‐State Batteries with Silicon ElectrodeAdvanced Materials, 2024
- Interlayer Engineering and Prelithiation: Empowering Si Anodes for Low‐Pressure‐Operating All‐Solid‐State BatteriesSmall, 2024
- Thin, Highly Ionic Conductive, and Mechanically Robust Frame‐Based Solid Electrolyte Membrane for All‐Solid‐State Li BatteriesAdvanced Energy Materials, 2023
- The promise of alloy anodes for solid-state batteriesJoule, 2022
- In Situ Investigation of Lithium Metal–Solid Electrolyte Anode Interfaces with ToF‐SIMSAdvanced Materials Interfaces, 2022
- Stress evolution during cycling of alloy-anode solid-state batteriesJoule, 2021
- The Ag−K (Silver-Potassium) systemBulletin of Alloy Phase Diagrams, 1986