Meenakumari Ramachandran
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Meenakumari Ramachandran has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Suresh Muthusamy
Department of Electrical and Electronics Engineering, Kongu Engineering College (Autonomous), Erode, India
10 shared publications - Hitesh Panchal
Mechanical Engineering Department, Government Engineering College Patan, Katpur, India
5 shared publications Sathish Kumar Shanmugam
Department of EEE Jansons Institute of Technology Coimbatore India
3 shared publications- Sathish Kumar Shanmugam
Dept of Electrical and Electronics Engineering, M. Kumarasamy College of Engineering, Thalavapalayam, India
3 shared publications - Senthilkumar Arumugam
Chettinad College of Engineering & Technology, Karur, Tamilnadu, India
3 shared publications - Ashokkumar Ravindaran
Department of Electrical and Electronics Engineering, Bannari Amman Institute of Technology (Autonomous), Erode, India
2 shared publications
Latest Publications
- 7 March 2025
- Published by Springer Nature in Electrical Engineering
- Vol. 107  (7) , 9387-9401
Optimizing distributed generation allocation to minimize power loss in distribution systems using DBO-APCNN approach
- 7 March 2025
- Published by Springer Nature in Electrical Engineering
- Vol. 107  (7) , 9387-9401
Optimizing distributed generation allocation to minimize power loss in distribution systems using DBO-APCNN approach
- 13 November 2024
- Published by Springer Nature in Electrical Engineering
- Vol. 107  (5) , 5749-5767
ANN-optimized NR-SHE method for single-sourced, multi-configurable switched capacitor-based multilevel inverter for sustainable power applications
- 13 November 2024
- Published by Springer Nature in Electrical Engineering
- Vol. 107  (5) , 5749-5767
ANN-optimized NR-SHE method for single-sourced, multi-configurable switched capacitor-based multilevel inverter for sustainable power applications
- 24 June 2024
- Published by Springer Nature in Wireless Personal Communications
- Vol. 136  (3) , 1923-1944
A Novel Method for Illegal Driver Detection and Legal Driver Identification Using Multitask Learning Based LSTM Models for Real Time Applications
- 24 June 2024
- Published by Springer Nature in Wireless Personal Communications
- Vol. 136  (3) , 1923-1944
A Novel Method for Illegal Driver Detection and Legal Driver Identification Using Multitask Learning Based LSTM Models for Real Time Applications
- 25 April 2023
- Published by Springer Nature in Wireless Personal Communications
- Vol. 131  (1) , 679-707
A Novel Method for Analyzing the Performance of Free Space Optical Communication in WDM Using EDFA
- 25 April 2023
- Published by Springer Nature in Wireless Personal Communications
- Vol. 131  (1) , 679-707
A Novel Method for Analyzing the Performance of Free Space Optical Communication in WDM Using EDFA
- 24 April 2023
- Published by Springer Nature in Wireless Personal Communications
- Vol. 131  (1) , 581-608
A Novel Security Algorithm RPBB31 for Securing the Social Media Analyzed Data using Machine Learning Algorithms
- 24 April 2023
- Published by Springer Nature in Wireless Personal Communications
- Vol. 131  (1) , 581-608
A Novel Security Algorithm RPBB31 for Securing the Social Media Analyzed Data using Machine Learning Algorithms
- 20 November 2022
- Published by Taylor & Francis in International Journal of Ambient Energy
- Vol. 44  (1) , 654-667
An optimal selection of slot/pole combination and its influence on energy efficient PMSM for submersible water pumping applications
In India, some states have the depth of ground water reaching beyond 300 - 450 meters from the ground level. Traditionally, Submersible Induction Motor (SIM) based pump-sets are considered for irrigations. However, SIMs are no longer a good choice for deep-bore wells, since there exists a reduction in its operating point, resulting in lower discharge. Based on these facts, Submersible Brushless Permanent Magnet Motor (SBLPMM) is considered. The proposed SBLPMM is designed for 15 kW with an objective of high torque and power density within the given volumetric and diametric constraints. The proposed SBLPMM will reduce the number of impeller stages when compared with SIMs and hence it will be a viable alternative to the SIMs and hence paying way for effective energy conservation.The study concentrates on the optimal selection of the geometrical poles and the FEM based results confirm that the operating efficiency is enhanced with the SBLPMM.
- 20 November 2022
- Published by Taylor & Francis in International Journal of Ambient Energy
- Vol. 44  (1) , 654-667
An optimal selection of slot/pole combination and its influence on energy efficient PMSM for submersible water pumping applications
In India, some states have the depth of ground water reaching beyond 300 - 450 meters from the ground level. Traditionally, Submersible Induction Motor (SIM) based pump-sets are considered for irrigations. However, SIMs are no longer a good choice for deep-bore wells, since there exists a reduction in its operating point, resulting in lower discharge. Based on these facts, Submersible Brushless Permanent Magnet Motor (SBLPMM) is considered. The proposed SBLPMM is designed for 15 kW with an objective of high torque and power density within the given volumetric and diametric constraints. The proposed SBLPMM will reduce the number of impeller stages when compared with SIMs and hence it will be a viable alternative to the SIMs and hence paying way for effective energy conservation.The study concentrates on the optimal selection of the geometrical poles and the FEM based results confirm that the operating efficiency is enhanced with the SBLPMM.
- 7 September 2022
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 44  (3) , 8198-8220
An experimental investigation on performance enhancement of twin wedge solar still with concrete basin for increased fresh water production
Passive solar stills are simple and economic water treatment systems which apply natural hydrological cycle to transform brackish and saline water into freshwater useful to the society. This paper reports the performance of aTwin Wedge Solar Still with concrete basin (TWSS(CONC)) designed suitably for implementation in Green Building Applications. Through an experimental investigation, the performance of this TWSSsystem is compared with that of Conventional Solar Still (CSS) and the effect of including an Aluminum liner to the concrete basin of TWSS(TWSS(CONC+Al)) is also studied. The experimentation was carried out at South Indian location of Kattankulathur (Longitude/Latitude: 88.6241° E/24.3636° N), on a summer day. The distillate yields of the CSS, TWSS(CONC)and TWSS(CONC+Al) were obtained as 1.90 l/m2, 2.77 l/m2 and 4.17 l/m2, correspondingly. The thermal efficiency of TWSS(CONC+Al), was 1.8 times more than TWSS(CONC) and 2.6 times more than the CSS. The TWSS(CONC+Al), delivered freshwater at the cost of $ 0.027 per liter. The Twin Wedge shaped glass lid allowed more solar radiation to be received by the basin as well as increased the condensation surface. The aluminum lining inTWSS(CONC+Al) aided proper distribution of heat in the basin and increased the evaporation rate. The thermal energy which was stockpiled in the concrete basin enabled to maintain a significant difference between thebasin water and condensing surface temperatures during the hours when the solar radiation intensity was low. The payback time period for TWSS(CONC+Al)was estimated to be only 9 months.
- 7 September 2022
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 44  (3) , 8198-8220
An experimental investigation on performance enhancement of twin wedge solar still with concrete basin for increased fresh water production
Passive solar stills are simple and economic water treatment systems which apply natural hydrological cycle to transform brackish and saline water into freshwater useful to the society. This paper reports the performance of aTwin Wedge Solar Still with concrete basin (TWSS(CONC)) designed suitably for implementation in Green Building Applications. Through an experimental investigation, the performance of this TWSSsystem is compared with that of Conventional Solar Still (CSS) and the effect of including an Aluminum liner to the concrete basin of TWSS(TWSS(CONC+Al)) is also studied. The experimentation was carried out at South Indian location of Kattankulathur (Longitude/Latitude: 88.6241° E/24.3636° N), on a summer day. The distillate yields of the CSS, TWSS(CONC)and TWSS(CONC+Al) were obtained as 1.90 l/m2, 2.77 l/m2 and 4.17 l/m2, correspondingly. The thermal efficiency of TWSS(CONC+Al), was 1.8 times more than TWSS(CONC) and 2.6 times more than the CSS. The TWSS(CONC+Al), delivered freshwater at the cost of $ 0.027 per liter. The Twin Wedge shaped glass lid allowed more solar radiation to be received by the basin as well as increased the condensation surface. The aluminum lining inTWSS(CONC+Al) aided proper distribution of heat in the basin and increased the evaporation rate. The thermal energy which was stockpiled in the concrete basin enabled to maintain a significant difference between thebasin water and condensing surface temperatures during the hours when the solar radiation intensity was low. The payback time period for TWSS(CONC+Al)was estimated to be only 9 months.
- Open Access
- 21 May 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-11
Autonomous Multiport Solar Power Plant with Lithium Ion Battery Storage Using a Voltage Source Inverter for Automotive Applications
Electrical power systems are accessible in renewable energy systems, and hybrid battery systems or energy storage systems (ESS) are capable of delivering uninterruptible power to the demand even if faults occur. Additionally, the energy storage device increases system dynamics during power fluctuations. A photovoltaic (PV) battery hybrid system with an ESS link is considered, and an impact leveling management system is planned to transfer the ability to load as well as the battery. Electricity generation is vital, and also the method is fairly complicated. The goal of lowering production prices, maintaining instrumentation, and its fuels, all play necessary roles within the method. As a result, producers should import fuel to satisfy the electrical demand, the assembly value rises. We are considering using renewable energy sources to avert a harmful economic imbalance. We tend to introduce a replacement system to complete the load of alternative energy. To boost inertia and improve frequency responsiveness, load side inverters linking PV to grid and energy storage systems are used on a utility-scale (ESS). Furthermore, with growing PV penetration, independent development of PV and ESS linking to the load and the battery is one of the alternatives for steady operation of the standalone system. The associate integrated the idea for PV and ESS integration to AC load and ESS and it is used for automotive applications.
- 21 May 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-11
Open AccessAutonomous Multiport Solar Power Plant with Lithium Ion Battery Storage Using a Voltage Source Inverter for Automotive Applications
Electrical power systems are accessible in renewable energy systems, and hybrid battery systems or energy storage systems (ESS) are capable of delivering uninterruptible power to the demand even if faults occur. Additionally, the energy storage device increases system dynamics during power fluctuations. A photovoltaic (PV) battery hybrid system with an ESS link is considered, and an impact leveling management system is planned to transfer the ability to load as well as the battery. Electricity generation is vital, and also the method is fairly complicated. The goal of lowering production prices, maintaining instrumentation, and its fuels, all play necessary roles within the method. As a result, producers should import fuel to satisfy the electrical demand, the assembly value rises. We are considering using renewable energy sources to avert a harmful economic imbalance. We tend to introduce a replacement system to complete the load of alternative energy. To boost inertia and improve frequency responsiveness, load side inverters linking PV to grid and energy storage systems are used on a utility-scale (ESS). Furthermore, with growing PV penetration, independent development of PV and ESS linking to the load and the battery is one of the alternatives for steady operation of the standalone system. The associate integrated the idea for PV and ESS integration to AC load and ESS and it is used for automotive applications.
- 21 December 2021
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 45  (4) , 10472-10486
Performance investigation of 140 kW grid connected solar PV system installed in southern region of India – A detailed case study and analysis
This article focuses on the performance assessment of a grid-connected 140-kW photovoltaic (PV) plant which is installed on the roof of an aerospace hanger block located at the SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India. The installed unit comprises of seven parallel strings, each comprised of 60 modules. Each of the seven strings is separately connected to an individual inverter (Delta RPI-M20A), i.e., a string inverter of 20 kW. An investigation deals with parameters recorded based on the average of daily, monthly, and yearly data such as AC and DC energy generated, reference yield, array yield and final yields, performance ratio and capacity factor. In the year 2020, the total power generated by the proposed project site is 139,125 kW. Further, the average reference yield varied from a minimum of 118.9 (hr/mth) to a maximum of 197.6 (hr/mth). Similarly, the average final yield varies from 86.14 (hr) to 135.61 (hr). The capacity factor and performance ratio are found to have a maximum of 18.83% and 80.29% and a minimum of 11.96% and 64.14%, respectively. Thus, this article helps readers identify the practicability and sustainability of solar-powered PV systems in rural and remote locations.
- 21 December 2021
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 45  (4) , 10472-10486
Performance investigation of 140 kW grid connected solar PV system installed in southern region of India – A detailed case study and analysis
This article focuses on the performance assessment of a grid-connected 140-kW photovoltaic (PV) plant which is installed on the roof of an aerospace hanger block located at the SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India. The installed unit comprises of seven parallel strings, each comprised of 60 modules. Each of the seven strings is separately connected to an individual inverter (Delta RPI-M20A), i.e., a string inverter of 20 kW. An investigation deals with parameters recorded based on the average of daily, monthly, and yearly data such as AC and DC energy generated, reference yield, array yield and final yields, performance ratio and capacity factor. In the year 2020, the total power generated by the proposed project site is 139,125 kW. Further, the average reference yield varied from a minimum of 118.9 (hr/mth) to a maximum of 197.6 (hr/mth). Similarly, the average final yield varies from 86.14 (hr) to 135.61 (hr). The capacity factor and performance ratio are found to have a maximum of 18.83% and 80.29% and a minimum of 11.96% and 64.14%, respectively. Thus, this article helps readers identify the practicability and sustainability of solar-powered PV systems in rural and remote locations.
- Retracted
- 5 May 2021
- Published by Wiley in International Journal of Communication Systems
- Vol. 35  (16) , e4759
Retracted: Synchrophasor data transfer tool IEEE C37.118.2—Implementation and study of measurement standard for a futuristic substation automation
Sasikala R, Meenakumari R. Synchrophasor data transfer tool IEEE C37.118.2–Implementation and study of measurement standard for a futuristic substation automation, International Journal of Communication Systems 2021, (https://doi.org/10.1002/dac.4759). The above article published online on 05 May 2021 in Wiley Online Library (wileyonlinelibrary.com), has been retracted by agreement between the Editor and John Wiley and Sons Ltd. Following publication, it has come to our attention that the people named as the Guest Editors of the Special Issue were being impersonated by a fraudulent entity and the articles were not reviewed in line with the journal's peer review standards. The Editor has determined that the articles do not meet the required scholarly standards of the journal, and therefore has taken the decision to retract the article. We did not find any evidence of misconduct by the authors. The authors have been informed of the decision to retract.
- 5 May 2021
- Published by Wiley in International Journal of Communication Systems
- Vol. 35  (16) , e4759
RetractedRetracted: Synchrophasor data transfer tool IEEE C37.118.2—Implementation and study of measurement standard for a futuristic substation automation
Sasikala R, Meenakumari R. Synchrophasor data transfer tool IEEE C37.118.2–Implementation and study of measurement standard for a futuristic substation automation, International Journal of Communication Systems 2021, (https://doi.org/10.1002/dac.4759). The above article published online on 05 May 2021 in Wiley Online Library (wileyonlinelibrary.com), has been retracted by agreement between the Editor and John Wiley and Sons Ltd. Following publication, it has come to our attention that the people named as the Guest Editors of the Special Issue were being impersonated by a fraudulent entity and the articles were not reviewed in line with the journal's peer review standards. The Editor has determined that the articles do not meet the required scholarly standards of the journal, and therefore has taken the decision to retract the article. We did not find any evidence of misconduct by the authors. The authors have been informed of the decision to retract.