DDDebabrata Dhupal

Debabrata Dhupal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Research Subjects


Debabrata Dhupal has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Emerging Trends in Ultrasonic and Friction Stir Spot Welding of Polymers and Metal-Polymer Hybrids: A Review of Process Mechanics, Microstructure, and Joint Performance

    by Kanchan Kumari, Swastik Pradhan, Chitrasen Samantra, Manisha Priyadarshini, Abhishek Barua, Debabrata Dhupal

    The growing need for lightweight, multifunctional, and high-performance structures in the automotive, aerospace, electronics, and medical industries has driven the development of advanced joining technologies for polymers and metal-polymer combinations. Among these, ultrasonic welding (USW) and friction stir spot welding (FSSW) have emerged as promising solid-state techniques capable of producing reliable joints with minimal thermal degradation and enhanced interfacial bonding. This review focuses on recent developments in USW and FSSW of thermoplastics, fiber-reinforced composites, and hybrid metal–polymer systems, with a particular emphasis on process mechanics, microstructural evolution, and joint performance. The mechanisms of heat generation, material flow behavior, and consolidation are discussed in relation to key process parameters, including applied pressure, rotational speed, vibration amplitude, plunge depth, and dwell time. Microstructural transformations such as polymer chain orientation, recrystallization, interfacial diffusion, and defect formation are analyzed to establish process–structure–property relationships. Mechanical performance metrics, including lap shear strength, fatigue resistance, impact behavior, and environmental durability, are critically compared across different materials and welding methods. Furthermore, recent advances in numerical and thermo-mechanical modeling, in situ process monitoring, and data-driven optimization are discussed to highlight pathways toward predictive and scalable manufacturing. Current industrial applications and existing limitations such as challenges in automation, thickness constraints, and hybrid material compatibility are also evaluated. Finally, key research gaps and future directions are identified to improve joint reliability, sustainability, and broader industrial adoption of advanced solid-state welding technologies.

  • Machining of Zirconia Ceramic with a USMM Process Using SiC Abrasives: An Experimental Investigation and Simulation

    by Bikash Banerjee, Santosh Kumar, Subhadip Pradhan, Somnath Das, Biswanath Doloi, Debabrata Dhupal

  • COMPARATIVE PERFORMANCE EVALUATION BETWEEN AJM AND HOT-AJM DURING MACHINING OF ZIRCONIA CERAMIC USING SILICON CARBIDE ABRASIVES

    by Subhadip Pradhan, Soumya Ranjan Samantaray, Debabrata Dhupal, Sudhansu Ranjan DAS

    Abrasive jet machining (AJM) process is commonly used for cutting and drilling of brittle materials in which the phenomenon of material removal can be considered as mechanical erosion by the impingement of high-velocity abrasives. The focus of this research is to compare the performance and economic benefits of recently developed hot abrasive jet machining (hot-AJM) with traditional AJM techniques when machining zirconia ceramic using silicon carbide (SiC) grain particles. The modified AJM employed abrasive air jet (combination of hot abrasive and compressed air) to strike on the work surface for material erosion. Briefly, the cutting performance is investigated by comparing the technological characteristics like material removal rate, machining cost, and taper angle of the developed hole. Abrasive grain size, nozzle pressure, and stand-off distance are considered as the variable factors for machining trials in accordance with the design of experiments. The usage of hot abrasives in AJM improved the material erosion owing to the occurrence of plastic deformation followed by deep chipping on the machined surfaces. From the results, it was observed that the hot-AJM outperformed the normal AJM with regard to improved material removal, reduced dimensional deviation of hole and minimal machining cost. According to the findings of the cost assessment, the machining of zirconia ceramic using hot-AJM was more cost-effective than using normal AJM since it resulted 25% reduction in the total cost of production. The overall machining cost expenditure per unit in hot-AJM was lower (INR 123.12) than expenditure in traditional AJM (INR 153.47). Machining with hot-modified AJM, compared to normal AJM, offers a more techno-economically viable solution for enhancing machinability.


  • ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPP—AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS

    by Soumikh Roy, Arupam Pradhan, Smita Padhan, Anshuman DAS, Sudhansu Ranjan DAS, Debabrata Dhupal

    High strength low alloy (HSLA) AISI grade 4140 is grabbing the eyes of automobile industries for its superior properties. However, the production of finished components of HSLA steel by machining under dry environment is challenging owing to high cutting temperature and friction. The usage of low-cost coated carbide tools and environment-friendly cooling-lubrication approach are thereof being given importance for the past few decades for economic and sustainable machining. In this study, the power consumption (Pc) during the hard turning process of AISI 4140 steel was analyzed using an AlTiSiN-coated carbide tool under various cutting environment conditions, including dry cutting, flooded cutting, and nanofluid-MQL cutting. For this study, the nanofluid was prepared by blending MWCNT nanoparticles with an environmentally friendly automotive radiator coolant, which served as the base fluid. Briefly, the cooling-lubrication performance is investigated by comparing the machining responses like machined surface morphology, tool wear, cutting force, and temperature. The variance analysis was adopted to determine the significance level of experimental parameters (speed, feed, nose radius, depth of cut, cutting environments) affecting the Pc. To predict and optimize Pc during hard turning with machining variables, the response surface method (RSM) was proposed. Following the predictive modeling and optimization, the results were applied for economic assessment and for energy saving carbon footprint evaluation. This innovative research also addresses comparative sustainability evaluation in hard turning under different C/L environments using life cycle assessment (LCA) towards cleaner and safer production. Results indicate that cutting speed was the most influential item on Pc enhancement. Furthermore, as compared to dry and flooded turning, lower cutting force, reduced cutting temperature, shorter width of flank wear, and better surface morphology are obtained under nanofluid-MQL machining. It is experienced that nanofluid-MQL machining outperformed towards sustainability improvement concerning techno-economically viable societal acceptable and environment friendliness.


  • Computational approach for structural and thermal behavior of laser-machined micro-grooves on alumina ceramic using ANSYS

    by Subhadip Pradhan, Samir Kumar Panda, Kalyani Panigrahi, Debabrata Dhupal

    Heat affected zone on the micromachined material, a hindrance in achieving good precision and accuracy, which are adequate requirements for micromachined materials, is a drawback of nanosecond micromachining assisted by laser. The primary objective of this paper is to take into consideration a number of input parameters, such as the pulse width and the temperature of the laser beam, and study the effect that these parameters have on the heat flux generated as well as on the temperature distribution along the square grooves of 200 µm width and depth that are to be micro-machined on an alumina ceramic workpiece. However, processing of alumina ceramic on a micron-scale requires careful consideration to raise the quality standard. This will be accomplished by analyzing the data collected from the micro-machining process. Using the ANSYS® software, it is possible to visualize not only the region where heat is generated but also the way in which the input parameters influence the structural qualities of the micro machined groove surface. The many thermal models that have been constructed have revealed specific changes in the structural qualities that have had a significant impact on the upper width, the lower width, and the depth of the groove when applied to a variety of different parametric settings. Finally, developed analytical model is compared with the experimental models. The highest prediction error was found to be 1.68%, while, for constant 50 W power and 150–250 mm/s of speed, the average prediction error was determined to be 1.18%. As a result, the proposed model closely matches the experimental findings, and the proposed model can be used to estimate channel profile.


  • GENERATION OF EFFUSION HOLES ON ULTRA-HIGH TEMPERATURE ALLOY BY MICRO ELECTRO-DISCHARGE MACHINING PROCESS

    by Debabrata Dhupal, Debasish Panigrahi, Sweta Rout, Rajesh Kumar Bhuyan, Soumyaranjan Nayak, Pankaj Charan Jena, Sudhansu Ranjan DAS

    Fabrication of surface features like effusion holes on ultra-high temperature (UHT) alloys with micro electro-discharge machining ([ ]-EDM) is a very convolute strategy. Due to the exceptional mechanical properties and resistance to ease brittle transformation at elevated temperatures, UHT alloys are being widely used in hot sections of aero engines. This research tailored the existing capabilities of [ ]-EDM setup by employing a copper-tungsten (Cu-W) hybrid tool electrode which has been rarely reported. This research addresses investigations, predictive modeling, and optimization during [ ]-EDM of UHT alloy, namely Inconel 718. For experimentation, the factors like inter-electrodes gap (IEG), current ([ ]), and pulse on/off time ([ ]on, [ ]off) were considered as input variables to analyze the responses like overcut (OC), tool wear rate (TWR), material removal rate (MRR), and diametric alterations in between the top and bottom shape of holes’ feature (DE). The multi-objective desirability-based artificial bee colony optimization (MOABC) projected optimal parametric settings of 5.276 A, 16.389 [ ]s, 1.77 [ ]s, and 50 [ ]m for [ ], [ ]on, [ ]off, and IEG, respectively. These settings provide MRR, TWR, OC, and DE solutions of 0.001479, −0.00038, 0.030239, and 0.047048 mm, respectively. Further, the confirmation test has been performed to validate the optimal solution. The results supported the ideal settings with error values of 0.03177, 1.31578, 0.05863, and 0.04704 for MRR, TWR, OC, and DE, respectively. Distinctive diagnostic tests assessed by several statistical parameters ([ ], [ ], [ ]2, AD-P values) confirmed that the accuracy of developed models for prediction of various performance characteristics has high degree of resemblance with experimental results and the adequacy as well as accuracy of models is also demonstrated. Moreover, the surface morphology has also been scrutinized by microscopical observation to perceive the consequences of the electro-discharge phenomenon on both electrodes. Overall, the research comprises experimentation, surface integrity study, and parametric optimization followed by a confirmation test to perform the betterment of the current [ ]-EDM approach.


  • Experimental and simulation approach of surface generation on K-80 alumina ceramic by recently developed sustainable FB-HAJM using novel nozzle design

    by Subhadip Pradhan, Debabrata Dhupal

    K-80 alumina ceramic makes it challenging to machine them economically due to extreme hardness. Fluidized bed-hot abrasive jet machining (FB-HAJMing), in which a target profile is eroded by the impingement action of air-hot abrasive jet, which containing fine hot abrasive grains for machining of K-80 alumina ceramic materials without thermal damage. This study is intended to analyse kerf angle (KA), surface roughness (Rz) and material removal rate (MRR) using HAJMing process of K-80 alumina ceramic. Fifteen sets of experimental trials were conducted two times using tungsten carbide (WC) nozzle with and without internal thread. The identified three cutting parameters i.e., air pressure (P), abrasive temperature (T) and stand-off-distance (SOD), were considered for experimental design. Furthermore, the response surface methodology (RSM), statistical techniques (here, desirability function approach) followed by computational approach (here, genetic algorithm) are respectively employed for experimental investigation, predictive modelling and multi-objective optimization. Subsequently, confirmation tests evaluate the efficiency of the suggested two multi---objective optimization methods to rationalize the utility and awareness of the usefulness of hot abrasives in HAJMing. Moreover, computational fluid dynamics (CFD) modelling was utilized to develop a comprehensive relation between HAJMed profile geometry and erosive flow. Finally, the environmental ‘Pugh Matrix’ approach is proposed for the HAJMing process sustainability evaluation. The results indicated a desire to improve the cutting efficiency for material erosion by using hot abrasives in the HAJMing procedure. The most important parameter for surface roughness is abrasive temperature, while pressure is important for both KA and MRR. The use of hot abrasives in the FB-HAJM process has demonstrated a focus on improving the cutting performance for material removal. From an economic standpoint, the current study presents a technological criterion for feasible industrial applications of the FB-HAJM method, such as in aerospace, precision manufacturing, and biomedical field.


  • Experimental Investigation on Dimensional Characteristics and Surface Morphology of Microchannels Fabricated on Smart Ceramic by DPSS Nd:YAG Laser

    by Samir Kumar Panda, Sweta Rout, Debasish Panigrahi, Debabrata Dhupala

    Smart ceramic material like barium titanate (BaTiO3) is in high demand in today's highly competitive precision industries; as it has numerous applications in electronic, biomedical, and aerospace engineering.In this endeavor, laser micro-milling approach (LMMA) hasbeenattempted with a suitable experimental design plan; to scrutinize the laser influencing variables against the LMMA outcomes during the processing of BaTiO3 throughout the fabrication of microchannels. This article presents an investigational act on the fabricated micro-channels to discern the impacts of LMMA parameters (gas pressure, scan strategy, current and scanning speed) against the dimensional (like deviations in channel upper and lower width) and surface characteristics of the surface feature. The surface morphology study hasbeen accomplished with the support of energy dispersive spectroscopy (EDS) in conjunction with scanning electron microscope (SEM) to scrutinize the elemental alterations and surface characteristics at the zone of laser ablation. A statistical multi-objective optimization (MOO) technique known as grey relational analysis (GRA) has beenused later in this paper to predict an optimal parametric setting. The MOO results’ efficacy has been validated further in the corroboration assessments, the predicted optimal solutions have been obtained with an error of 4.57 %, 3.89 % and 4.88 % for W-RCL, LWD and UWD respectively.