Oksana Kostiv
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oksana Kostiv has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Anatoliy Zelinskiy
Ivan Franko National University of Lviv
2 shared publications - Nazar Manko
Department of Regulation of Cell Proliferation and Apoptosis, Institute of Cell Biology, National Academy of Sciences of Ukraine, Lviv, Ukraine
2 shared publications O. Korkuna
Analytical Chemistry Department Ivan Franko National University of Lviv Kyryla & Mefodiya Str., 6 79005 Lviv Ukraine
2 shared publications- Oleksandr Gromyko
Microbial Culture Collection of Antibiotic Producers, Ivan Franko National University of Lviv, Lviv, Ukraine
2 shared publications - Oleksandra Ilkov
JSC “Halychpharm
2 shared publications - Olga Klyuchivska
Department of Regulation of Cell Proliferation and Apoptosis, Institute of Cell Biology, National Academy of Sciences of Ukraine, Lviv, Ukraine
2 shared publications
Latest Publications
- Open Access
- 22 September 2026
- Published by Elsevier in Results in Surfaces and Interfaces
- Vol. 25
Synthesis and characterization of novel clinoptilolite composite doped with silver (Ag+) and copper (Cu2+) cations and assessment of its disinfecting potential towards laboratory and pathogenic strains of Staphylococcus aureus and Pseudomonas aeruginosa
- 22 September 2026
- Published by Elsevier in Results in Surfaces and Interfaces
- Vol. 25
Open AccessSynthesis and characterization of novel clinoptilolite composite doped with silver (Ag+) and copper (Cu2+) cations and assessment of its disinfecting potential towards laboratory and pathogenic strains of Staphylococcus aureus and Pseudomonas aeruginosa
- Open Access
- 1 January 2025
- Published by Taras Shevchenko National University of Kyiv in METHODS AND OBJECTS OF CHEMICAL ANALYSIS
- Vol. 20 (2)
Application of the Azo Coupling Reaction for Ceftriaxone Assay in Drugs using Spectrophotometric Method
A spectrophotometric method for determining ceftriaxone based on the formation of a red-colored azo compound from the diazotized antibiotic and the phenolic reagent o-cresol has been developed. The optimal conditions for ceftriaxone diazotization were determined to be a 12.0 M hydrochloric acid medium with sodium nitrite in 10-fold excess relative to ceftriaxone. Conditions for the azo coupling reaction between ceftriaxone diazonium salt and o-cresol were optimized, with maximum yield achieved in an alkaline medium (final NaOH concentration of 0.16 M) and a 10-fold reagent excess relative to ceftriaxone. The azo compound formed remains stable for 1 hour. Effective molar absorptivity at the absorption maximum (516 nm) for the ceftriaxone–o-cresol azo compound was found to be (6.90 ± 0.16)·10³ L∙mol-¹∙cm-¹. The developed spectrophotometric method is sensitive and rapid, allowing ceftriaxone determination within the concentration range of 0.79–51.30 μg∙mL-¹, with a detection limit of 4.3·10-⁷ M. The method was successfully validated for ceftriaxone analysis in pharmaceutical preparations, including mono-component drugs and injection powders.
- 1 January 2025
- Published by Taras Shevchenko National University of Kyiv in METHODS AND OBJECTS OF CHEMICAL ANALYSIS
- Vol. 20 (2)
Open AccessApplication of the Azo Coupling Reaction for Ceftriaxone Assay in Drugs using Spectrophotometric Method
A spectrophotometric method for determining ceftriaxone based on the formation of a red-colored azo compound from the diazotized antibiotic and the phenolic reagent o-cresol has been developed. The optimal conditions for ceftriaxone diazotization were determined to be a 12.0 M hydrochloric acid medium with sodium nitrite in 10-fold excess relative to ceftriaxone. Conditions for the azo coupling reaction between ceftriaxone diazonium salt and o-cresol were optimized, with maximum yield achieved in an alkaline medium (final NaOH concentration of 0.16 M) and a 10-fold reagent excess relative to ceftriaxone. The azo compound formed remains stable for 1 hour. Effective molar absorptivity at the absorption maximum (516 nm) for the ceftriaxone–o-cresol azo compound was found to be (6.90 ± 0.16)·10³ L∙mol-¹∙cm-¹. The developed spectrophotometric method is sensitive and rapid, allowing ceftriaxone determination within the concentration range of 0.79–51.30 μg∙mL-¹, with a detection limit of 4.3·10-⁷ M. The method was successfully validated for ceftriaxone analysis in pharmaceutical preparations, including mono-component drugs and injection powders.
- Open Access
- 1 June 2024
- Published by Ivan Franko National University of Lviv in Studia Biologica
- Vol. 18 (2) , 3-19
Study of antibacterial effects of Transcarpathian clinoptilolite compositions modified in different chemical ways
Background. Natural clinoptilolite (CL) meets most of the requirements for the multifunctional mineral nanomaterials. It is considered biologically neutral and non-toxic. CL is the only representative of natural zeolites that has been approved for use in medical practice and food industry. Antibacterial activity of Transcarpathian clinoptilolite was shown to be enhanced via its modification using thermal, chemical and mechanochemical treatments. The natural form of this mineral contains a significant concentration of surface silanol (-OH) groups. An increase in the efficiency of zeolite-based materials in terms of biological activity can be achieved by means of thermal and chemical treatments, replacement of cations in the exchange complex, doping with heavy metal cations, or mechanochemical treatment. Materials and Methods. FTIR spectroscopy, Electronic spectroscopy, Particle size distribution, IR spectroscopy, Crystal structure and morphology, Measurement of antibacterial activity. Results. Intact and thermally modified CL was shown to exhibit weak antibacterial effect, while its mechanical modification led to an enhanced activity. It was established that H-form of clinoptilolite demonstrated higher efficiency in inhibiting the growth of Gram-positive bacteria, compared to the Na-form of the clinoptilolite, but their effect on growth of Gram-negative bacteria was insignificant. Such an activity was accompanied by an increase in the specific surface area and porosity that promoted better contact with bacteria. Conclusions: Different samples of CL had dissimilar effect on specific types of bacteria. Intact CL has a weak antibacterial activity of inhibiting growth of microorganisms, while thermal, chemical, and mechanical modifications of the CL structure differentially increased such an activity. The H-form of CL inhibited the growth of Gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis) more effectively compared to the Na-form of CL. However, H-form of CL has a weak effect on growth of the Gram-negative bacteria (Pseudomonas aeruginosa, Pseudomonas fluorescens).
- 1 June 2024
- Published by Ivan Franko National University of Lviv in Studia Biologica
- Vol. 18 (2) , 3-19
Open AccessStudy of antibacterial effects of Transcarpathian clinoptilolite compositions modified in different chemical ways
Background. Natural clinoptilolite (CL) meets most of the requirements for the multifunctional mineral nanomaterials. It is considered biologically neutral and non-toxic. CL is the only representative of natural zeolites that has been approved for use in medical practice and food industry. Antibacterial activity of Transcarpathian clinoptilolite was shown to be enhanced via its modification using thermal, chemical and mechanochemical treatments. The natural form of this mineral contains a significant concentration of surface silanol (-OH) groups. An increase in the efficiency of zeolite-based materials in terms of biological activity can be achieved by means of thermal and chemical treatments, replacement of cations in the exchange complex, doping with heavy metal cations, or mechanochemical treatment. Materials and Methods. FTIR spectroscopy, Electronic spectroscopy, Particle size distribution, IR spectroscopy, Crystal structure and morphology, Measurement of antibacterial activity. Results. Intact and thermally modified CL was shown to exhibit weak antibacterial effect, while its mechanical modification led to an enhanced activity. It was established that H-form of clinoptilolite demonstrated higher efficiency in inhibiting the growth of Gram-positive bacteria, compared to the Na-form of the clinoptilolite, but their effect on growth of Gram-negative bacteria was insignificant. Such an activity was accompanied by an increase in the specific surface area and porosity that promoted better contact with bacteria. Conclusions: Different samples of CL had dissimilar effect on specific types of bacteria. Intact CL has a weak antibacterial activity of inhibiting growth of microorganisms, while thermal, chemical, and mechanical modifications of the CL structure differentially increased such an activity. The H-form of CL inhibited the growth of Gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis) more effectively compared to the Na-form of CL. However, H-form of CL has a weak effect on growth of the Gram-negative bacteria (Pseudomonas aeruginosa, Pseudomonas fluorescens).
- 12 July 2021
- Published by Wiley in Electroanalysis
- Vol. 33 (10) , 2169-2179
A New Approach for the Voltammetric Determination of Amoxicillin in the Dosage Form Using Azo Coupling Reaction with Sulphanilamide
The novel method of amoxicillin (AM) determination has been developed using single‐sweep polarography. The proposed method is based on the obtaining of yellow coloured azo compound due to azo coupling reaction of previous diazotized sulphanilamide (SA) (in the medium of 0.6 M hydrochloric acid) with amoxicillin at pH=9.0 with the further reduction of the formed analytical form on a dropping mercury electrode. Voltammetric determination of amoxicillin is carried out due to the reduction peak of azo group of the obtained azo compound in the presence of 0.05 mol ⋅ L−1 Na2B4O7 as a background electrolyte at the potential Ecp2=−0.55 V and potential sweep rate of 2.5 V ⋅ s−1. The developed voltammetric method has two linear ranges of the determined concentrations (0.05–2.0) ⋅ 10−5 mol ⋅ L−1 and (0.2–1.0) ⋅ 10−4 mol ⋅ L−1 and the high sensitivity: LOD without the removing of unreacted sodium nitrite is 1.1 ⋅ 10−6 mol ⋅ L−1, and 7.2 ⋅ 10−7 mol ⋅ L−1, when NaNO2 excess is removed using urea. The developed voltammetric technique of AM determination has been approved during the analyses of tablets and oral suspension.
- 12 July 2021
- Published by Wiley in Electroanalysis
- Vol. 33 (10) , 2169-2179
A New Approach for the Voltammetric Determination of Amoxicillin in the Dosage Form Using Azo Coupling Reaction with Sulphanilamide
The novel method of amoxicillin (AM) determination has been developed using single‐sweep polarography. The proposed method is based on the obtaining of yellow coloured azo compound due to azo coupling reaction of previous diazotized sulphanilamide (SA) (in the medium of 0.6 M hydrochloric acid) with amoxicillin at pH=9.0 with the further reduction of the formed analytical form on a dropping mercury electrode. Voltammetric determination of amoxicillin is carried out due to the reduction peak of azo group of the obtained azo compound in the presence of 0.05 mol ⋅ L−1 Na2B4O7 as a background electrolyte at the potential Ecp2=−0.55 V and potential sweep rate of 2.5 V ⋅ s−1. The developed voltammetric method has two linear ranges of the determined concentrations (0.05–2.0) ⋅ 10−5 mol ⋅ L−1 and (0.2–1.0) ⋅ 10−4 mol ⋅ L−1 and the high sensitivity: LOD without the removing of unreacted sodium nitrite is 1.1 ⋅ 10−6 mol ⋅ L−1, and 7.2 ⋅ 10−7 mol ⋅ L−1, when NaNO2 excess is removed using urea. The developed voltammetric technique of AM determination has been approved during the analyses of tablets and oral suspension.
- Open Access
- 1 January 2020
- Published by Taras Shevchenko National University of Kyiv in METHODS AND OBJECTS OF CHEMICAL ANALYSIS
- Vol. 15 (3) , 144-155
Azocoupling Reaction Of Cephalosporin Antibiotics With 8-Hydroxyquinoline And Its Application In The Analysis Of Medicinal Products
Methods for spectrophotometric determination of cephalosporin antibiotics ceftazidime and ceftriaxone using azocoupling reactions with 8-hydroxyquinoline have been developed. Optimal conditions for the diazotization of antibiotics in hydrochloric acid (CHCl = 12 M) and subsequent azocoupling with 8-hydroxyquinoline in alkaline medium (0.16 M NaOH in the final volume) were established. The of azocopling products of violet and light red colors are formed, which are characterized by absorption maxima at 553 nm (ε553 = 6.31·103 M-1 cm-1) and 550 nm (ε550 = 1.45·104 M-1 cm-1) for ceftazidime and ceftriaxone, respectively. Stoichiometric ratios of the azo compounds components were determined using continuous variations methods and in both cases are 1:1. Sensitive methods of spectrophotometric determination of ceftazidime (LOD = 1.81∙10-6 M) and ceftriaxone (LOD = 5.92·10-7 M) have been developed. The selectivity of cephalosporin antibiotics spectrophotometric determination in the presence of auxiliary substance (sodium carbonate) has been investigated. The elaborated methods has been approved during the analyses of model solutions and the single component drug. The recommended procedure is well suited for the ceftazidime and ceftriaxone assay in medicine to assure high standards of quality control.
- 1 January 2020
- Published by Taras Shevchenko National University of Kyiv in METHODS AND OBJECTS OF CHEMICAL ANALYSIS
- Vol. 15 (3) , 144-155
Open AccessAzocoupling Reaction Of Cephalosporin Antibiotics With 8-Hydroxyquinoline And Its Application In The Analysis Of Medicinal Products
Methods for spectrophotometric determination of cephalosporin antibiotics ceftazidime and ceftriaxone using azocoupling reactions with 8-hydroxyquinoline have been developed. Optimal conditions for the diazotization of antibiotics in hydrochloric acid (CHCl = 12 M) and subsequent azocoupling with 8-hydroxyquinoline in alkaline medium (0.16 M NaOH in the final volume) were established. The of azocopling products of violet and light red colors are formed, which are characterized by absorption maxima at 553 nm (ε553 = 6.31·103 M-1 cm-1) and 550 nm (ε550 = 1.45·104 M-1 cm-1) for ceftazidime and ceftriaxone, respectively. Stoichiometric ratios of the azo compounds components were determined using continuous variations methods and in both cases are 1:1. Sensitive methods of spectrophotometric determination of ceftazidime (LOD = 1.81∙10-6 M) and ceftriaxone (LOD = 5.92·10-7 M) have been developed. The selectivity of cephalosporin antibiotics spectrophotometric determination in the presence of auxiliary substance (sodium carbonate) has been investigated. The elaborated methods has been approved during the analyses of model solutions and the single component drug. The recommended procedure is well suited for the ceftazidime and ceftriaxone assay in medicine to assure high standards of quality control.