Brunella Cafra
Brunella Cafra has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Alessandra Alberti
CNR-IMM
2 shared publications - Agata Grasso
ST Microelectronics
1 shared publication - Andrea Severino
STMicroelectronics
1 shared publication - Anna Bassi
STMicroelectronics, Zona Industriale Stradale Primosole 50, 95121 Catania, Italy
1 shared publication - Antonino La Magna
Istituto per la Microelettronica e Microsistemi, National Research Council of Italy, 95121 Catania, Italy
1 shared publication - Antonio Landi
STMicroelectronics, Stradale Primosole, 50, 95121 Catania, Italy
1 shared publication
Latest Publications
- Open Access
- 22 August 2024
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 359, 201-210
A Comparison between Different Post Grinding Processes on 4H-SiC Wafers
The need of removing the mechanical damage and the stress introduced during the thinning step of device process flow is challenging for manufacturing of high quality SiC-based devices. In this respect we have identified two different back finishing approaches, based on material removal and material rearrangement. The first one includes dry polishing (DP) and chemical mechanical polishing (CMP); the second one includes bulk and laser annealing. Systematical investigation on wafer warpage, sample morphology and die mechanical reliability have been conducted and comparison between the two approaches has been done. The CMP and DP processes can remove the damage produced by back grinding, recovering wafer warpage and resulting in a smoother surface. Bulk thermal annealing has provided better roughness levels and has been successful in stress relief, although the wafer permanence at high temperature is not compliant with the device process flow. Under laser annealing process, the surface features keep almost unchanged as well as warpage level. Despite being not effective in stress relief, from a mechanical point of view, the laser annealing process, does not impact die reliability, representing a suitable back finishing process especially in the optic of its use in backside ohmic contact formation.
- 22 August 2024
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 359, 201-210
Open AccessA Comparison between Different Post Grinding Processes on 4H-SiC Wafers
The need of removing the mechanical damage and the stress introduced during the thinning step of device process flow is challenging for manufacturing of high quality SiC-based devices. In this respect we have identified two different back finishing approaches, based on material removal and material rearrangement. The first one includes dry polishing (DP) and chemical mechanical polishing (CMP); the second one includes bulk and laser annealing. Systematical investigation on wafer warpage, sample morphology and die mechanical reliability have been conducted and comparison between the two approaches has been done. The CMP and DP processes can remove the damage produced by back grinding, recovering wafer warpage and resulting in a smoother surface. Bulk thermal annealing has provided better roughness levels and has been successful in stress relief, although the wafer permanence at high temperature is not compliant with the device process flow. Under laser annealing process, the surface features keep almost unchanged as well as warpage level. Despite being not effective in stress relief, from a mechanical point of view, the laser annealing process, does not impact die reliability, representing a suitable back finishing process especially in the optic of its use in backside ohmic contact formation.
- Open Access
Mechanism of Grain Densification in Nano- and Poly-Crystalline Cu Films and Its Impact in Advanced Metallization Processes
We investigate the microstructural evolution of electrochemically deposited poly-crystalline Cu films during subsequent thermal process cycles at mild maximum temperatures, compatible with the integration in advanced metallization schemes for electronic device manufacturing. The modifications induced by the thermal budget have been characterized at different scales (from the film-substrate interface to the wafer scale) with different complementary techniques: X-ray Diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and dynamical warpage measurements. Moreover, the film internal grains’ evolution has been modelled by a tri-dimensional on-cell model, derived by the Pott-like multi-states configurational energy dependence, able to consider multiple orientation of the grains and densification kinetics in the canonical ensemble. Finally, a macroscopic model of the warpage dependence on the process conditions is discussed. The presented joint theoretical and experimental analysis provides a complete and consistent scenario of the grain densification phenomenon and its impact for the Cu film microstructure and the composite system morphology, indicating several strategies for the integration of the process in real device structures.
Open AccessMechanism of Grain Densification in Nano- and Poly-Crystalline Cu Films and Its Impact in Advanced Metallization Processes
We investigate the microstructural evolution of electrochemically deposited poly-crystalline Cu films during subsequent thermal process cycles at mild maximum temperatures, compatible with the integration in advanced metallization schemes for electronic device manufacturing. The modifications induced by the thermal budget have been characterized at different scales (from the film-substrate interface to the wafer scale) with different complementary techniques: X-ray Diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and dynamical warpage measurements. Moreover, the film internal grains’ evolution has been modelled by a tri-dimensional on-cell model, derived by the Pott-like multi-states configurational energy dependence, able to consider multiple orientation of the grains and densification kinetics in the canonical ensemble. Finally, a macroscopic model of the warpage dependence on the process conditions is discussed. The presented joint theoretical and experimental analysis provides a complete and consistent scenario of the grain densification phenomenon and its impact for the Cu film microstructure and the composite system morphology, indicating several strategies for the integration of the process in real device structures.
- Open Access
- 21 July 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (8) , 849
Morphological and Compositional Studies on Al/Ti/TiN/Si, Al/TiN/Si, Al/W/Si, Al/WN/Si Systems to Test the Diffusion Barrier Properties of Nanoscale-Thick Layers between Al and Si
In this work, an investigation of the properties of nanoscale-thick Ti/TiN, TiN, W, WN layers as diffusion barriers between Si and Al is carried out in view of Si-based electronic applications. Heat treatments were performed on the samples to activate interdiffusion between Si and Al. Changing annealing time and temperature, each sample was morphologically characterized by scanning electron microscopy and atomic force microscopy and compositionally characterized by Rutherford backscattering analysis. The aim is to evaluate the efficiency of the layers as diffusion barriers between Si and Al and, at the same time, to evaluate the surface morphological changes upon annealing processes.
- 21 July 2021
- Published by MDPI AG in Micromachines
- Vol. 12 (8) , 849
Open AccessMorphological and Compositional Studies on Al/Ti/TiN/Si, Al/TiN/Si, Al/W/Si, Al/WN/Si Systems to Test the Diffusion Barrier Properties of Nanoscale-Thick Layers between Al and Si
In this work, an investigation of the properties of nanoscale-thick Ti/TiN, TiN, W, WN layers as diffusion barriers between Si and Al is carried out in view of Si-based electronic applications. Heat treatments were performed on the samples to activate interdiffusion between Si and Al. Changing annealing time and temperature, each sample was morphologically characterized by scanning electron microscopy and atomic force microscopy and compositionally characterized by Rutherford backscattering analysis. The aim is to evaluate the efficiency of the layers as diffusion barriers between Si and Al and, at the same time, to evaluate the surface morphological changes upon annealing processes.
- Open Access
- 23 September 2005
- Published by International Union of Crystallography (IUCr) in Acta crystallographica Section B, Structural science, crystal engineering and materials
- Vol. 61 (5) , 486-491
Pseudoepitaxial transrotational structures in 14 nm-thick NiSi layers on [001] silicon
In a system consisting of two different lattices, structural stability is ensured when an epitaxial relationship occurs between them and allows the system to retain the stress whilst avoiding the formation of a polycrystalline film. The phenomenon occurs if the film thickness does not exceed a critical value. Here we show that in spite of its orthorhombic structure, a 14 nm-thick NiSi layer can three-dimensionally adapt to the cubic Si lattice by forming transrotational domains. Each domain arises by the continuous bending of the NiSi lattice, maintaining a close relationship with the substrate structure. The presence of transrotational domains does not cause a roughening of the layer, but instead it improves the structural and electrical stability of the silicide in comparison with a 24 nm-thick layer formed using the same annealing process. These results have relevant implications for the thickness scaling of NiSi layers which are currently used as metallizations of electronic devices.
- 23 September 2005
- Published by International Union of Crystallography (IUCr) in Acta crystallographica Section B, Structural science, crystal engineering and materials
- Vol. 61 (5) , 486-491
Open AccessPseudoepitaxial transrotational structures in 14 nm-thick NiSi layers on [001] silicon
In a system consisting of two different lattices, structural stability is ensured when an epitaxial relationship occurs between them and allows the system to retain the stress whilst avoiding the formation of a polycrystalline film. The phenomenon occurs if the film thickness does not exceed a critical value. Here we show that in spite of its orthorhombic structure, a 14 nm-thick NiSi layer can three-dimensionally adapt to the cubic Si lattice by forming transrotational domains. Each domain arises by the continuous bending of the NiSi lattice, maintaining a close relationship with the substrate structure. The presence of transrotational domains does not cause a roughening of the layer, but instead it improves the structural and electrical stability of the silicide in comparison with a 24 nm-thick layer formed using the same annealing process. These results have relevant implications for the thickness scaling of NiSi layers which are currently used as metallizations of electronic devices.