ASAndrea Severino

Andrea Severino

*This is an algorithmically generated author record based on publicly available information.

Andrea Severino has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Epitaxial Growth and Characterization of 4H-SiC Layer on C-Face and Si-Face Substrates

    by Chiara Nania, Ruggero Anzalone, Domenica Raciti, Nicolò Piluso, Fabiana Vento, Cristiano Calabretta, Andrea Severino

    4H-SiC is a wide-bandgap semiconductor that has become essential for power electronics due to its large bandgap, high critical electric field, and excellent thermal stability. Within the {0001} basal orientation, the two polar surfaces – Si-face and C-face – exhibit distinct behaviours during chemical vapor deposition (CVD) homoepitaxy, with direct implications for device performance and manufacturing. In this work, n -type epitaxial layers were deposited on 150 mm, 4° off-axis Si-face and C-face substrates under identical conditions in a single-wafer hot-wall LP-CVD reactor (T > 1600 °C, P = 3.0 kPa, C/Si = 1.05, silane/propane/ethylene precursors, N₂ doping, HCl additive). Characterization analysis revealed pronounced polarity-dependent differences. AFM analysis showed that C-face epilayers exhibited smoother surfaces and reduced step bunching compared with Si-face layers. Optical and photoluminescence inspections show polarity-dependent defect propagation, with the C-face displaying reduced replication of extended defects under the explored conditions. However, nitrogen incorporation on the C-face orientation was more than 25× higher than Si-face orientation and displayed poor uniformity, highlighting the limited effectiveness of site-competition epitaxy on this orientation. In contrast, the Si-face provides tighter control of doping concentration and lateral uniformity, albeit with higher step bunching and rougher surfaces. These findings emphasize a fundamental trade-off in 4H-SiC homoepitaxy: the C-face offers morphological and structural advantages, while the Si-face ensures superior doping control and process stability. A deeper understanding of these polarity-dependent mechanisms is essential to optimize epitaxial growth strategies and to enable the design of high-performance SiC power devices.

  • Open Access

    Micropipes in SiC Die Observed by Molten KOH Etching

    by Fabiana Vento, Nicolò Piluso, Cristiano Calabretta, Chiara Nania, Domenica Raciti, Ruggero Anzalone, Andrea Severino

    The growing demand for wide-bandgap (WBG) materials in the microelectronics industry has led to increased investment in medium- and high-voltage power products based on SiC technology. SiC offers an excellent balance between high voltage blocking capability, high temperature operation and high switching frequencies [1]. One key step in preparing high-performance devices is improving the growth process of SiC ingot material by Physical Vapor Transport (PVT). Epitaxial growth occurs through the chemical vapor deposition (CVD) method [2]. However, this method is reported to generate extended defects such as Complex Stacking Faults (formerly referred to as carrots) and Polytype Inclusions (formerly referred to as triangles or comets) and propagate defects pre-existing in the bulk material, such as micropipes (MPs) and threading screw dislocations (TSDs), which have a very high killer ratio in SiC devices [3, 4]. In this work, the KOH molten etching method was used to investigate the nature of the defects that caused device failures; Raman spectroscopy was also employed to identify the spectroscopic correspondence of the peaks of interest.

  • Open Access

    Challenges in 1SSF Detection in 4H-SiC Epilayer and Related Failure

    by Cristiano Calabretta, Cettina Bottari, Salvatore Adamo, Beatrice Carbone, Giovanni Maira, Fabiana Vento, Enzo Fontana, Nicolo Piluso, Mario S. Alessandrino, Alfio Russo, et al.

    Basal plane dislocations (BPDs) represent one of the most detrimental defects in 4H-SiC epitaxial wafers, causing forward voltage degradation in bipolar and power FET devices through the formation and expansion of Shockley-type stacking faults (SSFs). This expansion is driven by the recombination-enhanced dislocation glide (REDG) mechanism during forward bias operation. Despite efforts to mitigate BPD effects by converting them into threading edge dislocations (TEDs) via buffer layer engineering, throughout the epitaxial growth SSFs can still nucleate and propagate, particularly under high current injection. This work presents a comprehensive analysis combining electrical characterization, fault localization technique, Scanning Electron Microscopy (SEM) and micro-photoluminescence (μ-PL) to investigate SSF formation, crystallographic features, and their impact on device performance. The results underscore the critical role of advanced diagnostics and epitaxial process optimization in controlling SSF-related degradation and improving the reliability of SiC power devices.

  • Open Access

    Advanced Defects Study and Monitoring in New Generation 4H-SiC Devices

    by Nicolo Piluso, Cristiano Calabretta, Fabiana Vento, Ruggero Anzalone, Chiara Nania, Domenica Raciti, Antonio Rossitto, Alice Lombardo, Mario Coppola, Annalisa Cannizzaro, et al.

    A new design approach on 4H-SiC material is ongoing to improve the electrical performance of devices. As seen in silicon devices, multi-epitaxial growth enhances performance by reducing on-resistance (R on ). However, devices built on SiC face several challenges due to the very low dopant diffusion (e.g. phosphorus and aluminum) and defect evolution during the epitaxial growth. Monitoring defects like prismatic faults, stacking faults, partial dislocations, and micropipes, especially after regrowth, is essential to assess their impact on device performance. Defects with high killer ratio must be closely tracked to understand evolution thereof. In this work, we will show a method for early-stage process characterization and defect root-cause identification through sensitive inspections, effective reviews, and accurate defect classification to detect critical defects in 4H-SiC material when more than one epitaxial step is considered.

  • Open Access

    Unveiling the Role of Crystallographic Defects in SiC Device Reliability with Multi Modal Structural Analysis

    by Cristiano Calabretta, Nicolo Piluso, Ruggero Anzalone, Enzo Fontana, Giovanni Maira, Gabriele Bellocchi, Mario S. Alessandrino, Fabiana Vento, Chiara Nania, Salvatore Adamo, et al.

    The fabrication of high-quality 4H-SiC epitaxial layers for power semiconductor devices involves complex processes including bulk crystal growth, wafer slicing, polishing, and chemical vapor deposition (CVD) epitaxy with precise step-flow control on slightly off-cut Si-face substrates. Despite advances, intrinsic crystallographic defects such as threading dislocations, basal plane dislocations, and stacking faults remain significant challenges, propagating into epitaxial layers and degrading device performance and reliability. This study examines defect types and their impact on 4H-SiC wafers, emphasizing the transition from 150 mm to 200 mm substrates, which introduces increased defect densities and polytype inclusions. Comprehensive defect characterization using advanced microscopy, molten KOH etching, and electrical wafer sorting reveals strong correlations between physical defects—such as micropipes, carrot-like stacking faults, and triangular 3C-SiC inclusions—and device failures, particularly under reliability stress tests like High Temperature Reverse Bias (HTRB). The findings highlight the critical role of substrate quality, epitaxial growth conditions, and defect mapping in improving yield and device robustness. This work underscores the necessity of integrating multi-scale defect inspection and targeted reliability assessments to optimize 4H-SiC power device manufacturing and performance.

  • Open Access

    Evaluation of 4HSiC Epitaxial CVD Process on Different 200 mm Substrates for Power Device Applications

    by Chiara Nania, Domenica Raciti, Cristiano Calabretta, Fabiana Vento, Ruggero Anzalone, Enzo Fontana, Andrea Severino

    The increasing demand for WBG materials like SiC has led STMicroelectronics to expand wafer diameter from 150 mm to 200 mm, enhancing production yield and reducing costs. However, this expansion poses challenges in preserving crystalline quality. This investigation examines the impact of defects on 200 mm wafers, focusing on Total Usable Area (TUA) and electrical performance, particularly in wafers with polytype inclusions and high basal plane dislocation (BPD) density. Although the results for non-standard wafers show a significant reduction in TUA and an increase in electrical failures, the overall distribution of functional and non-functional devices remains stable, indicating process consistency.


  • Open Access

    New Insights in Orientation and Growth of 150 mm GaN on SiC for HEMT

    by Cristiano Calabretta, Nicolo Piluso, Simona Boninelli, Cristophe Iatosti, Emmanuel Roy, Daniele Calabriso, Louise Lilja, Alexandre Ellison, Carlo Riva, Ferdinando Iucolano, et al.

    This work explores the application of gallium nitride (GaN)-based solid-state devices for high-power, high-frequency, and high-temperature technologies. It presents an in-depth study of GaN on semi-insulating SiC substrates. The study demonstrates, through bow range investigation, optical microscopy, and X-ray diffraction (XRD), that by adapting growth parameters from those used for Si substrates to those suitable for SiC substrates, it is possible to achieve high-quality crystalline MOCVD growth both under on-axis and 4°off-axis substrate orientations.

  • Open Access

    GaN Cap UV Spectroscopy Assessment in AlGaN/GaN HEMT

    by Cristiano Calabretta, Nicolo Piluso, Hyon Ju Chauveau, Emmanuel Roy, Cristophe Iatosti, Francesco La Via, Andrea Severino

    This work discusses the use of gallium nitride (GaN)-based solid-state devices for high-power, high-frequency, and high-temperature technology. The article presents the results of an investigation into the Al fraction of AlGaN as a function of GaN cap growth time through µ-Raman and µ-Photoluminescence (µ-PL) spectroscopy under λ=325 and 266 nm laser source. The data exhibit that the detected Al fraction decreases as the GaN cap layer size increases, consistently with the surface quantum well effect in the layer stack. The study confirms that the GaN cap layer is acting as a potential well and enables the design of a non-destructive and quantitative assessment of the grown thickness of the GaN cap layer through UV laser spectroscopy. The interpretation of the data also rules out the possibility of thermal migration of Al in the adjacent GaN layers during MOCVD growth.


  • Open Access

    TEM Investigation on High Dose Al Implanted 4H-SiC Epitaxial Layer

    by Cristiano Calabretta, Nicolo Piluso, Corrado Bongiorno, Simona Boninelli, Francesco La Via, Andrea Severino

    Within this work, the effect of high dose Al ion implantation on 4H-SiC epitaxial layer is displayed. Through TEM investigation it is demonstrated that the implanted surface is suitable as seed for subsequent epitaxial regrowth generating a crystal free of extended defects. In order to assess the defects within the projected range of the ion implanted area, High Angle Annular Dark Field STEM (HAADF-STEM) analyses were performed demonstrating the atomic arrangement of the lattice in correspondence of the dislocation loop and the deviation of the crystallographic planes of 4H-SiC, driven by stress relaxation, that determine the staircase configuration of the implant pattern. Further emphasis is given to the detailed analysis of the precipitates atomic structure, whose preferential localization is ascertained. Using Energy-Dispersive X-ray spectroscopy (EDS) analysis, the precipitate is finally established as Al crystal with an FCC structure.

  • Open Access

    A Comparison between Different Post Grinding Processes on 4H-SiC Wafers

    by Brunella Cafra, Agata Grasso, Nicolo Piluso, Andrea Severino

    The need of removing the mechanical damage and the stress introduced during the thinning step of device process flow is challenging for manufacturing of high quality SiC-based devices. In this respect we have identified two different back finishing approaches, based on material removal and material rearrangement. The first one includes dry polishing (DP) and chemical mechanical polishing (CMP); the second one includes bulk and laser annealing. Systematical investigation on wafer warpage, sample morphology and die mechanical reliability have been conducted and comparison between the two approaches has been done. The CMP and DP processes can remove the damage produced by back grinding, recovering wafer warpage and resulting in a smoother surface. Bulk thermal annealing has provided better roughness levels and has been successful in stress relief, although the wafer permanence at high temperature is not compliant with the device process flow. Under laser annealing process, the surface features keep almost unchanged as well as warpage level. Despite being not effective in stress relief, from a mechanical point of view, the laser annealing process, does not impact die reliability, representing a suitable back finishing process especially in the optic of its use in backside ohmic contact formation.