HAHossam Abohamer

Hossam Abohamer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hossam Abohamer has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Investigating the Seepage Characteristics of an Open-Graded Friction Course Using Finite Element Modeling

    by Hossam Abohamer, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper

    An open-graded friction course (OGFC) is an asphalt mixture designed with a large air void (AV) content that provides enhanced drainage capability at the surface. The main objectives of this study were to investigate the impacts of selected factors (i.e., the OGFC thickness and coefficient of permeability, the permeability of the underlying layer, and traffic loading) on the drainage characteristics of the OGFC, develop a quantitative tool to simulate the deterioration in the functional performance of the OGFC, and propose new guidelines for the AV content of OGFC for optimum functionality. To this end, a three-dimensional finite element (FE) model was developed to evaluate the impacts of OGFC permeability, OGFC layer thickness, underlying layer permeability, rain intensity, and traffic volume on the seepage characteristics of OGFC pavements. The impacts of these factors were evaluated by calculating the time at which the OGFC surface reaches overflow condition ( TC). Statistical analysis of the results showed that all considered factors had a significant impact on OGFC seepage characteristics, except OGFC permeability. In addition, an artificial neural network (ANN) model was developed to predict TC without the need for FE modeling. Results indicated that the ANN model predicted TC accurately with R2 values of 0.99 and 0.98 in the training and validation stages, respectively. The results also indicated that the model accurately predicted TC over time for OGFC pavements with a root-mean-square error of less than 5.0%. Simulation runs were conducted using the developed FE model under different OGFC AV content conditions and rain intensities. Results revealed that an OGFC layer with an AV content of 16% would provide adequate drainage performance while minimizing OGFC durability issues.


  • Effects of Air Void Content, Crumb Rubber, and Pozzolanic Fillers on OGFC Laboratory Performance

    by Hossam Abohamer, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper

    Open-graded friction course (OGFC) is recognized for its ability for rapid stormwater drainage and effective noise reduction. Yet, several state highway agencies have limited its use because of concerns about its durability. The objective of this study was to investigate the impacts of air void (AV) reduction, crumb rubber (CR), and pozzolanic fillers on OGFC durability. Six mixtures were fabricated in the laboratory and their performance was evaluated. A control mix, 9.5-NMAS mix, two mixes incorporating CR, and two mixes prepared with pozzolanic fillers (i.e., Portland cement and fly ash) were evaluated. The test factorial was designed so that each mix would be evaluated at three different stages (i.e., production, construction, and field performance). A suite of laboratory tests was conducted including draindown, prediction of compaction effort, Cantabro abrasion loss, Hamburg wheel-tracking, Texas overlay tester, modified Lottman test, and boiling test to evaluate production, compaction, and OGFC resistance to raveling, permanent deformation, cracking, and moisture damage. Results showed that the reduction in AV and the use of CR and pozzolanic fillers considerably enhanced OGFC durability while maintaining appropriate functional performance (i.e., permeability).


  • Effects of Asphalt Binder Additives and Industrial Fillers on the Mechanical and Functional Properties of Open Graded Friction Course

    by Hossam Abohamer, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper, Samuel Cooper

    Open graded friction course (OGFC) is widely recognized for its environmental and safety benefits (e.g., water drainage and noise reduction). However, based on durability concerns, many states have limited the use of OGFC. The objective of this study was to evaluate the effectiveness of warm mix asphalt (WMA) additives, by-products (i.e., crumb rubber [CR]), and industrial fillers (i.e., Portland cement and fly ash) in enhancing the laboratory performance of OGFC mixes. To achieve this objective, a comprehensive experimental program was conducted to evaluate the performance of eight mixes at three distinct stages (i.e., production, construction, and service). A suite of laboratory tests was conducted including draindown, prediction of compaction energy, Cantabro abrasion loss, Hamburg wheel tracking, Texas overlay, modified Lottman, and boiling tests to evaluate production, compaction, and OGFC resistance to raveling, permanent deformation, cracking, and stripping damage. Results indicated that CR, Portland cement, and fly ash significantly enhanced OGFC durability while maintaining adequate functional performance. In addition, results also showed that the use of an organic WMA additive considerably reduced the production temperature and compaction effort required to place the mix at the desired density while showing a significant improvement in OGFC durability.


  • Field Performance and Cost-Effectiveness of Chip Seals and Asphalt Concrete Overlays with and without Asphalt Concrete Stripping Damage

    by Hossam Abohamer, Mostafa A. Elseifi, Nirmal Dhakal, Zhongjie Zhang, Christophe N. Fillastre

    The objective of this study was to evaluate the effects of asphalt concrete (AC) stripping damage on the field performance and cost-effectiveness (CE) of chip seals and AC overlays in pavement maintenance and rehabilitation. To achieve this objective, in-service pavement sections were selected from the Louisiana pavement management system (LaPMS) database and the presence of moisture damage was confirmed through the visual inspection of extracted cores. Sections were categorized according to traffic volume and their pavement condition index before treatment (PCI-). Road sections in each group were then divided into two groups as stripped and non-stripped sections. The average deterioration rate (ADR), extension in pavement service life (ΔPSL), average condition improvement over the treatment service life (PI), and CE were compared for stripped and non-stripped sections. Results showed that for chip seal sections, moisture damage negatively affected the performance of the sections with PCI- < 80 and low traffic volumes. For sections with PCI- > 80, similar performance was observed for stripped and non-stripped sections. For AC overlays, moisture-induced damage significantly affected the long-term pavement performance at all traffic levels. On average, moisture-induced damage decreased ΔPSL, PI, and CE of AC overlays by 5 years, 24%, and 0.5%, respectively. Overall, results of the study demonstrated that moisture damage has a significant effect on the performance of chip seal and AC overlay. Therefore, it is critical to identify and repair stripped sections before the maintenance and rehabilitation of in-service pavements to ensure adequate performance and optimum CE.


  • Open Access

    A New Generation of Open-Graded Friction Course for Enhanced Durability and Functionality

    by Hossam Abohamer

    This study aims at (1) enhancing Open Graded Friction Course (OGFC) mixes durability using additives and other by-products; (2) investigating the impacts of selected factors on OGFC pavements seepage characteristics; (3) developing a quantitative tool to model the deterioration in OGFC pavements functional performance; and (4) developing new guidelines of Air Void (AV) content for OGFC for optimum functionality and durability. For the durability objective, eight mixes were prepared with a PG 76-22 binder and two sources of aggregate (i.e., # 78 limestone and # 67 sandstone). Three Warm Mix Additives (WMA), one by-product (i.e., crumb rubber [CR]), and two fillers (i.e., F1 and F2) were evaluated. Results concluded that OGFC durability can be enhanced using WMA, CR, and fillers. For the second and third objectives, a 3-D Finite Element (FE) model was developed and calibrated based on field measurements. The transient analyses were used to evaluate the impacts of OGFC layer thickness, OGFC permeability, underlying layer permeability, rain intensity, and traffic volume on the seepage characteristics of OGFC. The impacts of these factors were evaluated by calculating the time at which a critical location on OGFC surface reaches overflow condition (TC). The statistical analysis showed that all these factors had a significant impact on the seepage characteristics of OGFC, except OGFC permeability. Furthermore, an Artificial Neural Network (ANN) model was developed for the prediction of TC without the need for FE modeling. Results indicated that the ANN model predicted TC accurately with R2 of 99 % and 98% in the training and validation stages, respectively. Moreover, this model accurately predicted the deterioration rate of OGFC functionality over time when compared to the results of the FE model. Therefore, this model can be used to determine the time at which routine maintenance should be applied for OGFC pavements. Lastly, simulation runs were conducted using the developed FE model under different AV content conditions ranging from (10 to 24 %) under varying rain intensity conditions. Results revealed that an OGFC layer with an AV content of 16% would provide adequate drainage performance of rainwater while minimizing OGFC durability issues.

  • Laboratory Evaluation of Warm-Mix Asphalt Open-Graded Friction Courses

    by Hossam Abohamer, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper

    This study aimed at evaluating the laboratory performance and physical characteristics of warm-mix asphalt (WMA) open-graded friction course (OGFC) mixes prepared with three warm-mix additives (two chemical additives and an organic additive). To achieve this objective, four mixes were prepared including a control mix (CM) prepared with a PG 76-22 binder and two sources of aggregate (i.e., # 78 limestone and # 67 sandstone). Air voids and coefficient of permeability ( k) were used to evaluate the functionality of the OGFC mixes. In relation to constructability, the compaction energy index was used to compare the required compaction effort during construction. Furthermore, the Cantabro test, Hamburg wheel-tracking test, Texas overlay test, Modified Lottman, and boil tests were conducted to evaluate durability, permanent deformation, cracking, and moisture-damage resistances of the evaluated mixes. Results indicated that the use of WMA technologies enhanced OGFC durability and performance. Among the evaluated mixes, the organic additive-OGFC met all Louisiana Department of Transportation and Development and NCHRP 01-55 requirements, as it notably enhanced OGFC durability, cracking, and moisture-damage resistance. Furthermore, the use of WMA notably reduced the required compaction effort and mixing temperature needed during production and construction as compared with the CM.


  • Development of a Deep Convolutional Neural Network for the Prediction of Pavement Roughness from 3D Images

    by Hossam Abohamer, Mostafa Elseifi, Nirmal Dhakal, Zhongjie Zhang, Christophe N. Fillastre

    Current roughness prediction models require extensive input data including pavement distress, climatic, and traffic data, which may be difficult to collect. In addition, these models have geographical limitations; therefore, a significant bias is expected if these models are used without recalibration. Pavement digital images can reflect both surface distresses and other surface irregularities that may affect pavement roughness conditions. In this study, convolutional neural networks (CNNs) were used to classify pavement sections into different roughness categories and to estimate International Roughness Index (IRI) values using pavement surface images. Furthermore, the effectiveness of artificial neural network (ANN) and multinomial logistic (MNL) regression models to categorize pavement sections into different roughness conditions was investigated. A pretrained CNN model was trained and validated using 850 three-dimensional (3D) pavement surface images, which were extracted from the Louisiana DOT and Development (LaDOTD) pavement management system (PMS) inventory. In addition, 1,142 test observations including IRI measurements and distress data were used to develop the ANN-based pattern recognition and MNL models. The developed CNN model outperformed the ANN and MNL models with an accuracy of 93.4% in the training stage. In addition, the CNN model predicted IRI values with a coefficient of determination (R2 ) of 0.985 and an average error of 5.9%.