CMCorey Mayeux

Corey Mayeux

*This is an algorithmically generated author record based on publicly available information.

Corey Mayeux has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Investigating the Seepage Characteristics of an Open-Graded Friction Course Using Finite Element Modeling

    by Hossam Abohamer, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper

    An open-graded friction course (OGFC) is an asphalt mixture designed with a large air void (AV) content that provides enhanced drainage capability at the surface. The main objectives of this study were to investigate the impacts of selected factors (i.e., the OGFC thickness and coefficient of permeability, the permeability of the underlying layer, and traffic loading) on the drainage characteristics of the OGFC, develop a quantitative tool to simulate the deterioration in the functional performance of the OGFC, and propose new guidelines for the AV content of OGFC for optimum functionality. To this end, a three-dimensional finite element (FE) model was developed to evaluate the impacts of OGFC permeability, OGFC layer thickness, underlying layer permeability, rain intensity, and traffic volume on the seepage characteristics of OGFC pavements. The impacts of these factors were evaluated by calculating the time at which the OGFC surface reaches overflow condition ( TC). Statistical analysis of the results showed that all considered factors had a significant impact on OGFC seepage characteristics, except OGFC permeability. In addition, an artificial neural network (ANN) model was developed to predict TC without the need for FE modeling. Results indicated that the ANN model predicted TC accurately with R2 values of 0.99 and 0.98 in the training and validation stages, respectively. The results also indicated that the model accurately predicted TC over time for OGFC pavements with a root-mean-square error of less than 5.0%. Simulation runs were conducted using the developed FE model under different OGFC AV content conditions and rain intensities. Results revealed that an OGFC layer with an AV content of 16% would provide adequate drainage performance while minimizing OGFC durability issues.


  • Effects of Air Void Content, Crumb Rubber, and Pozzolanic Fillers on OGFC Laboratory Performance

    by Hossam Abohamer, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper

    Open-graded friction course (OGFC) is recognized for its ability for rapid stormwater drainage and effective noise reduction. Yet, several state highway agencies have limited its use because of concerns about its durability. The objective of this study was to investigate the impacts of air void (AV) reduction, crumb rubber (CR), and pozzolanic fillers on OGFC durability. Six mixtures were fabricated in the laboratory and their performance was evaluated. A control mix, 9.5-NMAS mix, two mixes incorporating CR, and two mixes prepared with pozzolanic fillers (i.e., Portland cement and fly ash) were evaluated. The test factorial was designed so that each mix would be evaluated at three different stages (i.e., production, construction, and field performance). A suite of laboratory tests was conducted including draindown, prediction of compaction effort, Cantabro abrasion loss, Hamburg wheel-tracking, Texas overlay tester, modified Lottman test, and boiling test to evaluate production, compaction, and OGFC resistance to raveling, permanent deformation, cracking, and moisture damage. Results showed that the reduction in AV and the use of CR and pozzolanic fillers considerably enhanced OGFC durability while maintaining appropriate functional performance (i.e., permeability).


  • Effects of Asphalt Binder Additives and Industrial Fillers on the Mechanical and Functional Properties of Open Graded Friction Course

    by Hossam Abohamer, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper, Samuel Cooper

    Open graded friction course (OGFC) is widely recognized for its environmental and safety benefits (e.g., water drainage and noise reduction). However, based on durability concerns, many states have limited the use of OGFC. The objective of this study was to evaluate the effectiveness of warm mix asphalt (WMA) additives, by-products (i.e., crumb rubber [CR]), and industrial fillers (i.e., Portland cement and fly ash) in enhancing the laboratory performance of OGFC mixes. To achieve this objective, a comprehensive experimental program was conducted to evaluate the performance of eight mixes at three distinct stages (i.e., production, construction, and service). A suite of laboratory tests was conducted including draindown, prediction of compaction energy, Cantabro abrasion loss, Hamburg wheel tracking, Texas overlay, modified Lottman, and boiling tests to evaluate production, compaction, and OGFC resistance to raveling, permanent deformation, cracking, and stripping damage. Results indicated that CR, Portland cement, and fly ash significantly enhanced OGFC durability while maintaining adequate functional performance. In addition, results also showed that the use of an organic WMA additive considerably reduced the production temperature and compaction effort required to place the mix at the desired density while showing a significant improvement in OGFC durability.


  • Laboratory Evaluation of Warm-Mix Asphalt Open-Graded Friction Courses

    by Hossam Abohamer, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper

    This study aimed at evaluating the laboratory performance and physical characteristics of warm-mix asphalt (WMA) open-graded friction course (OGFC) mixes prepared with three warm-mix additives (two chemical additives and an organic additive). To achieve this objective, four mixes were prepared including a control mix (CM) prepared with a PG 76-22 binder and two sources of aggregate (i.e., # 78 limestone and # 67 sandstone). Air voids and coefficient of permeability ( k) were used to evaluate the functionality of the OGFC mixes. In relation to constructability, the compaction energy index was used to compare the required compaction effort during construction. Furthermore, the Cantabro test, Hamburg wheel-tracking test, Texas overlay test, Modified Lottman, and boil tests were conducted to evaluate durability, permanent deformation, cracking, and moisture-damage resistances of the evaluated mixes. Results indicated that the use of WMA technologies enhanced OGFC durability and performance. Among the evaluated mixes, the organic additive-OGFC met all Louisiana Department of Transportation and Development and NCHRP 01-55 requirements, as it notably enhanced OGFC durability, cracking, and moisture-damage resistance. Furthermore, the use of WMA notably reduced the required compaction effort and mixing temperature needed during production and construction as compared with the CM.


  • Effects of emulsion types, application rates, and crumb rubber on the laboratory performance of chip seal

    by Nafiur Rahman, Tanvir Ahmed Sarkar, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper


  • Rheological and Molecular Characterizations of Tire Rubber Modified Asphalt Emulsion

    by Tanvir Ahmed Sarkar, Nafiur Rahman, Mostafa A. Elseifi, Corey Mayeux, Samuel B. Cooper

    The aim of this study was to characterize the chemical, molecular, and rheological properties of different asphalt emulsions including a newly introduced tire-rubber modified asphalt emulsion (CRS-2TR). Three emulsions (CRS-2TR, CRS-2P, and CRS-2) and one asphalt rubber binder (AC20-5TR) were evaluated in this study. The superpave performance grade (PG), surface performance grade (SPG), and the multiple stress creep recovery (MSCR) test were conducted to evaluate the rheological properties of the binder residues. Evaluation of the differences in the functional groups, molecular weight distribution, and chemical composition of the asphalt binder residues was conducted using Fourier transform infrared spectroscopy (FTIR), high-pressure gel permeation chromatography (HP-GPC), and saturates, aromatics, resins and asphaltenes (SARA) fractionation, respectively. The chemical and molecular characterization test results indicated that the tire-rubber modified emulsion had lower carbonyl indices and colloidal instability indices as compared to the other conventional emulsions, indicating a higher resistance to aging. On the other hand, the rheological test results showed that the performance of CRS-2TR was comparable to CRS-2P and was expected to perform better than CRS-2. In addition, the moisture susceptibility of the binder residues from the bitumen bond strength (BBS) test showed that CRS-2TR had a greater pull-off tensile strength in both dry and wet conditions as compared to CRS-2 and had statistically equal performance results as compared to CRS-2P.