Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xinggan Lu has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modified Neural Network with Hysteresis Operators and Adaptive Learning for Tracking Control of Piezoelectric Stack Actuator

    by Yuansheng Chen, Wenwu Yang, Lei Yuan, Shaona Liu, Ruijing Zhang, Xinggan Lu, Wei Chen

    According to the proposed four-layer modified neural network with adaptive learning, an adaptive learning model is designed, and the Play operator weight function update algorithm, the dead-zone operator weight function update algorithm, and the hybrid model program are studied. The hysteresis nonlinearity of a piezoelectric stack actuator at multiple frequencies was tested separately, and the root mean square error (RMSE) of five control methods, including the without control, classic PI and DZ model, and the four-layer modified neural network with an adaptive learning model, were compared through experimental studies. The experimental results show that compared with the without control condition, the RMSE of the classic PI and DZ model is reduced by 67.98% at a frequency of 1 Hz, which can effectively reduce the hysteresis nonlinearity of the piezoelectric stack actuator and has a good hysteresis compensation effect. Compared with the classic PI and DZ model, under the four-layer modified neural network with an adaptive learning model, the RMSE of the piezoelectric stack actuator is reduced by 15.34% at 1 Hz, and the error can still be reduced by 67.75% even at 10 Hz. Indicating that the four-layer modified neural network with an adaptive learning model still has a good hysteresis compensation effect at a wider frequency band.


  • Open Access

    Visualized experimental study on the process of high-pressure gas jet impacting on liquid-water column

    by Jian Wang, Shenshen Cheng, Xinggan Lu, Kun Jiang

    To investigate the interaction laws governing the interaction between a gas jet and a liquid medium during the process of liquid-balanced launching, and to elucidate the influence of high-temperature gas on the characteristics of the gas–liquid multiphase flow field, a specialized visual experiment platform was designed and constructed for studying high-pressure gas jet impacts on a liquid-water column. Experiments were conducted involving both single-phase gas jet impacts and high-pressure gas jet impacts of varying temperatures on the liquid-water column. A dynamic data acquisition system and an image acquisition system were employed to document the pressure variation patterns within each chamber and the evolution of the jet flow field. The experimental findings revealed the following: The interaction between the high-pressure gas jet and the liquid medium induced pressure fluctuations within the gas chamber connected to the nozzle. Specifically, as the gas temperature increased, the amplitude of these pressure fluctuations also increased. On impact of the high-pressure gas jet, an arc-shaped head gas cavity formed within the liquid-water column. Higher gas temperatures led to a more rapid and unstable development of both the gas cavity and the gas–liquid multiphase flow field. Subsequently, the columnar liquid-water broke into numerous small droplets and dispersed into the atmospheric environment once the gas cavity exited the confinement of the tail tube. In addition, the vaporization of liquid-water due to high-temperature gas impact resulted in significant water vapor generation, contributing to irregularities in the evolution of the gas–liquid multiphase flow field. The displacement equation of the gas cavity adhered to a first-order exponential decay function, and the established mathematical model exhibited a goodness of fit exceeding 0.99. These findings provide a valuable reference for accurate interior ballistic modeling of the liquid-balanced launching of tubular weapons.

  • Impact of mixed charge uniformity and particle size distribution on interior ballistic performance: A study based on the multiple particle element method

    by Shenshen Cheng, Xiao Li, Xinggan Lu, Ling Tao, Hao Wang

    Mixed charge effectively integrates the advantages of different propellant types. However, the irregular particle sizes inherent in this technology pose a challenge in achieving uniform mixing. Traditional two-fluid methods struggle to elucidate the mechanisms of particle dispersion and the resulting disparities in homogeneity. To address this issue, this study introduces the multiple particle element method (MPEM) and applies it to the internal ballistic modeling of mixed charges. Notably, a Gaussian distribution model is introduced to quantify the degree of mixing uniformity within the gun barrel. The internal ballistic process is simulated through coupled calculations between the particle element solver and a computational fluid dynamics solver. The computational results demonstrate that the MPEM accurately predicts the pressure and velocity characteristics within the chamber, aligning closely with experimental data, with deviations confined to within 1%. This study reveals that an increase in web thickness leads to prolonged burning times of the propellant surface, consequently protracting the overall burnout time of the combustion chamber and expanding the distribution range of burnout locations. As the difference in web thickness widens, this distribution disparity becomes more pronounced, accompanied by an escalating pressure wave amplitude. Furthermore, an increase in the standard deviation of mixing uniformity distribution broadens the pressure and velocity distribution ranges. While velocity variability exhibits a decelerating growth trajectory, pressure variability demonstrates an accelerating trend. The MPEM can effectively contribute to improving ballistic performance and safety.


  • Performance comparison and evaluation of sequential and unordered charge in module base on two-phase flow method

    by Shenshen Cheng, Xinggan Lu, Tianyi Ma, Ruyi Tao, Shao Xue

    Modular charges can form different structures within the chamber, offering flexibility, versatility, and high efficiency, and have therefore been widely used in large-diameter combustion and propulsion systems. To effectively enhance the performance of the propulsion system through optimizing the number of modules and charging methods, this study integrates the two-phase flow particle element method to analyze the performance variations of different combinations of module numbers and charging modes and employs multiple evaluation methods. Based on experimental verification, the numerical calculation shows that the varying number of modules significantly impacts on the flow process in the chamber. When the number of modules is low, the increased particle dispersion space results in notable pressure fluctuations in the ignition transfer process in the chamber, leading to low energy utilization efficiency. With increase in the number of modules, the energy utilization rate in the chamber also increases gradually, and the growth rate initially accelerates and then decelerates. The sequential charging mode can significantly improve the energy utilization efficiency and the charge utilization rate per unit chamber volume. Compared to the unordered charging mode, the charge amount increases by more than 9.5%, and the velocity increases by approximately 5%–8%.


  • Modeling multiphase flow characteristics and particle behavior of mixed charge structure using the particle element method

    by Shenshen Cheng, Xinggan Lu, Ruyi Tao, Shao Xue

    A mixed charge structure is composed of several different types of particles to achieve performance indicators that cannot be achieved by a single particle and usually need to be adjusted and evaluated to determine the parameters in the chamber according to different demand. To balance the accuracy and efficiency, and obtain more calculation parameters, the solid phase is modeled by the particle element method, while the fluid phase is modeled by a computational fluid dynamics solver based on the fifth-order weighted essentially non-oscillatory scheme. In the mixed charge structure of different granular propellant, different particles in different areas are classified and particle elements are divided, and the particle interface position is tracked and captured to form the particle element distribution with different sizes. In the mixed charge structure with central tubular propellant, the granular and the tubular propellants are calculated separately by different types of particle elements, and the source term is used in coupling simulation. Comparing with the calculation results of experiment, the velocity error is less than 1%, and the maximal breech pressure error is less than 3%. In the mixed granular charge structure, due to the differences in combustion rates and movement velocities of the particles, the distribution state of the particles within the chamber is significantly different from that of single particle charge. Additionally, the standard deviation of the porosity is greater in mixed granular charge (0.051: 0.0086). In the mixed charge structure with central tubular propellant, the porosity of tubular and particle distribution in the chamber is discontinuous, and the pressure distribution is effectively predicted. The calculation results show that the perfect consistency of ignition in the chamber, which shows the superior flame-spreading performance of the central tubular propellant. The particle element method can provide a powerful tool for the rapid modeling and simulation of two-phase flow.


  • Open Access

    The Application of the Particle Element Method in Tubular Propellant Charge Structure: Lumped Element Method and Multiple-Element Method

    by Ruyi Tao, Shenshen Cheng, Xinggan Lu, Shao Xue, Xiaoting Cui

    Due to the orderly arrangement of tubular propellant, the permeability of combustion gases is improved, which is beneficial for enhancing the safety of the combustion system. However, current internal ballistic gas-solid flow calculation methods adopt a quasi-fluid assumption, which cannot accurately account for the characteristics of long tube shapes. Additionally, tubular propellants exhibit both overall movement and parameter distribution characteristics, necessitating the decoupling of gas and solid phases. These two deficiencies in previous studies have limited the effectiveness of gas-solid flow simulations for tubular propellant. This paper proposes a numerical calculation model suitable for tubular propellant charging based on the particle element method for internal ballistic two-phase flow. Firstly, considering the overall movement characteristics of tubular propellants, the concept of blank particle elements is introduced to represent pure gas phase regions. Then, based on computational requirements, the tubular propellants are divided to form the lumped element method and the multiple-element method. The moving boundary method is used to calculate the movement process of the propellant bed particle group and is compared with experimental results to verify the applicability of the two methods in tubular propellant beds. Analysis results show that the particle element method can effectively capture changes in the flow field inside the chamber and the position of tubular propellants. The lumped element method can quickly obtain the flow field distribution characteristics inside the chamber, while the multiple-element method can capture parameter distribution characteristics at different positions of the tubular propellants while ensuring overall movement.


  • Open Access

    A coupled computational framework for the transient heat transfer in the typical pyrotechnic device

    by Kun Jiang, Xinggan Lu, ShenShen Cheng, Wang Jian

    Propellant combustion in pyrotechnic devices produces high-temperature, high-pressure gas. The component is moved by high-pressure gas, which subsequently impacts the energy absorber and causes it to compress and deform. The temperature difference between the high-temperature gas and the wall causes transient heat transfer. Propellant combustion, transient heat transfer, and structural response are coupled, but previous studies had to independently analyze them. Therefore, a multi-physical field numerical model is developed based on the commercial software ABAQUS in this paper, which couples energetic material combustion, transient heat transfer, and structural response. In the user subroutine VUAMP, a lumped-parameter model is used to predict the parameter distribution of combustion products. This determines the load applied on the thin-walled tube and the boundary conditions of transient heat transfer. In ABAQUS, the transient heat transfer and structural response are investigated by the direct thermo-dynamic coupling method. The coupling effect between multiple physical fields is realized by real-time parameter exchange. The rationality and accuracy of the coupling model are verified by comparison with the experiment. The results show that the coupling model can effectively simulate the complex coupling process after considering the transient heat transfer and the interaction between multiple physical fields. Taking a pyrotechnic device as the research object, the pressure load accuracy obtained by the coupled model is improved by 5.1%, and the structure response obtained is also closer to the experiment result. At the same time, more characteristic parameters of the structure field and temperature field are obtained.