Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shenshen Cheng has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental and Theoretical Investigation of Inflated Beam Vibrations in Vacuum and Air

    by Chunlei Jiang, Shaona Liu, Shen-Shen Cheng, Dailin Li, Hao Wang, Ruyi Tao

    Accurate modal analysis is essential for evaluating the dynamic characteristics of inflated beams, while modal analysis under vacuum conditions remains challenging. In this study, a vibration test platform for air and vacuum environments was developed to measure the modal characteristics of inflated beams under different inflation pressures. The average differences between the modal frequencies measured in air and vacuum were 26.141% for the first-order mode and 22.976% for the second-order mode, indicating that air effects cannot be neglected for thin inflated beams. A model considering the air added-mass effect was then proposed and validated experimentally. The average deviations between the predicted and experimental results were 1.46% for the first-order mode and 4.58% for the second-order mode. Acoustic–structure coupling simulations further verified the hydrodynamic pressure on the membrane surface, and the circumferential pressure distribution agreed well with the proposed model. Then the hydrodynamic pressure distribution along the beam axis was calculated, showing that the added mass is approximately uniformly distributed along the inflated beam. Finally, the distributed mass method was adopted to calculate the dry and wet modal characteristics of the inflated beam. The average deviations between the numerical and experimental results were 2.89% for the dry modal results and 2.35% for the wet modal results.

  • The effect of a composite buffer chamber structure on the interior ballistic performance of a gas-driven launch system

    by Wenbin Zhang, Shenshen Cheng, Ruyi Tao, Hexuan Hu

    Gas-driven launch stands as a core enabling technology for realizing rapid space response and precise attitude adjustment of spacecraft, thereby exhibiting substantial application potential in the field of aerospace engineering. To address the dual requirements of high-pressure stable combustion and low-overload launch during propulsion, this study proposes and investigates a gas-driven system with a composite structure: a stable combustion environment is constructed via the synergistic design of a high-pressure chamber and a buffer chamber, while the low-overload launch target is accomplished relying on a multi-stage drive architecture. To verify the rationality of the system, a ground experiment prototype was developed, and a multi-parameter synchronous testing system was established, by which key performance indicators, including pressure, thrust, and launch velocity, were measured. Meanwhile, a numerical simulation method for two-phase flow in multi-stage series interior ballistics was constructed to finely describe the spatiotemporal distribution characteristics of the chamber flow field. Experimental and simulation results demonstrate that: the peak pressure of the high-pressure chamber reaches 77.46 MPa, whereas the peak pressures of the low-pressure chambers are all constrained within 7.1 MPa, successfully fulfilling the design objective of high-pressure combustion with low-pressure propulsion, the maximum error of key parameters between numerical calculations and experimental tests is merely 6.49%, and the theoretically calculated pressure curves are in good agreement with the measured ones in terms of variation trend, which validates the reliability and accuracy of the established numerical model. Based on the validated numerical model, parametric performance prediction was conducted to systematically investigate the effects of buffer chamber orifice size and the number of holes in the high-pressure chamber partition board on launch performance. The results indicate that the system achieves optimal launch performance when adopting the structural parameter combination of a double-hole high-pressure chamber outlet and a 5 mm buffer chamber outlet. This finding provides a theoretical basis and technical reference for the structural optimization design of similar gas-driven systems.


  • Open Access

    Visualized experimental study on the process of high-pressure gas jet impacting on liquid-water column

    by Jian Wang, Shenshen Cheng, Xinggan Lu, Kun Jiang

    To investigate the interaction laws governing the interaction between a gas jet and a liquid medium during the process of liquid-balanced launching, and to elucidate the influence of high-temperature gas on the characteristics of the gas–liquid multiphase flow field, a specialized visual experiment platform was designed and constructed for studying high-pressure gas jet impacts on a liquid-water column. Experiments were conducted involving both single-phase gas jet impacts and high-pressure gas jet impacts of varying temperatures on the liquid-water column. A dynamic data acquisition system and an image acquisition system were employed to document the pressure variation patterns within each chamber and the evolution of the jet flow field. The experimental findings revealed the following: The interaction between the high-pressure gas jet and the liquid medium induced pressure fluctuations within the gas chamber connected to the nozzle. Specifically, as the gas temperature increased, the amplitude of these pressure fluctuations also increased. On impact of the high-pressure gas jet, an arc-shaped head gas cavity formed within the liquid-water column. Higher gas temperatures led to a more rapid and unstable development of both the gas cavity and the gas–liquid multiphase flow field. Subsequently, the columnar liquid-water broke into numerous small droplets and dispersed into the atmospheric environment once the gas cavity exited the confinement of the tail tube. In addition, the vaporization of liquid-water due to high-temperature gas impact resulted in significant water vapor generation, contributing to irregularities in the evolution of the gas–liquid multiphase flow field. The displacement equation of the gas cavity adhered to a first-order exponential decay function, and the established mathematical model exhibited a goodness of fit exceeding 0.99. These findings provide a valuable reference for accurate interior ballistic modeling of the liquid-balanced launching of tubular weapons.

  • Performance Analysis and Optimization of Large Caliber Davis Gun Based on Interior Ballistic Two‐Phase Flow Method

    by Jian Wang, Shenshen Cheng, Xinggan Lu, Ling Tao, Hao Wang

    Davis gun as a representative experimental method for achieving hypersonic velocities in large‐scale, high‐mass systems effectively addresses the demands for scalable and reproducible dynamic experiments. However, due to the geometric constraints and operational principles inherent to Davis gun launch devices, the mechanistic interpretation of parameter interactions under multi‐physics coupling effects remains challenging. To address this, the present study establishes a coupled gas‐solid two‐phase flow model for the interior ballistics of the Davis gun and employs a multi‐objective optimization algorithm to conduct quantitative analysis of multi‐parameter interactions. Comparative experimental validations across multiple caliber configurations demonstrate that the proposed two‐phase flow model achieves remarkable prediction accuracy for chamber pressure and velocity fields, with computational results showing excellent consistency with experimental data (error margin within 5%). Transient analysis of combustion kinetics and propellant gas distribution characteristics reveals that the chamber flow field in the Davis gun exhibits a bidirectional expanding asymmetric distribution pattern, fundamentally differing from the unidirectional flow evolution observed in conventional launch devices. Multi‐objective parameter optimization results indicate that the feasible design space exhibits pronounced aggregation characteristics. Through correlation analysis of the feasible region and coefficient matrix, a multi‐parameter influence propagation pathway map is constructed, thereby providing a systematic technical pathway and engineering paradigm for multi‐objective optimization design of Davis gun launch interior ballistics.

  • Impact of mixed charge uniformity and particle size distribution on interior ballistic performance: A study based on the multiple particle element method

    by Shenshen Cheng, Xiao Li, Xinggan Lu, Ling Tao, Hao Wang

    Mixed charge effectively integrates the advantages of different propellant types. However, the irregular particle sizes inherent in this technology pose a challenge in achieving uniform mixing. Traditional two-fluid methods struggle to elucidate the mechanisms of particle dispersion and the resulting disparities in homogeneity. To address this issue, this study introduces the multiple particle element method (MPEM) and applies it to the internal ballistic modeling of mixed charges. Notably, a Gaussian distribution model is introduced to quantify the degree of mixing uniformity within the gun barrel. The internal ballistic process is simulated through coupled calculations between the particle element solver and a computational fluid dynamics solver. The computational results demonstrate that the MPEM accurately predicts the pressure and velocity characteristics within the chamber, aligning closely with experimental data, with deviations confined to within 1%. This study reveals that an increase in web thickness leads to prolonged burning times of the propellant surface, consequently protracting the overall burnout time of the combustion chamber and expanding the distribution range of burnout locations. As the difference in web thickness widens, this distribution disparity becomes more pronounced, accompanied by an escalating pressure wave amplitude. Furthermore, an increase in the standard deviation of mixing uniformity distribution broadens the pressure and velocity distribution ranges. While velocity variability exhibits a decelerating growth trajectory, pressure variability demonstrates an accelerating trend. The MPEM can effectively contribute to improving ballistic performance and safety.


  • Performance comparison and evaluation of sequential and unordered charge in module base on two-phase flow method

    by Shenshen Cheng, Xinggan Lu, Tianyi Ma, Ruyi Tao, Shao Xue

    Modular charges can form different structures within the chamber, offering flexibility, versatility, and high efficiency, and have therefore been widely used in large-diameter combustion and propulsion systems. To effectively enhance the performance of the propulsion system through optimizing the number of modules and charging methods, this study integrates the two-phase flow particle element method to analyze the performance variations of different combinations of module numbers and charging modes and employs multiple evaluation methods. Based on experimental verification, the numerical calculation shows that the varying number of modules significantly impacts on the flow process in the chamber. When the number of modules is low, the increased particle dispersion space results in notable pressure fluctuations in the ignition transfer process in the chamber, leading to low energy utilization efficiency. With increase in the number of modules, the energy utilization rate in the chamber also increases gradually, and the growth rate initially accelerates and then decelerates. The sequential charging mode can significantly improve the energy utilization efficiency and the charge utilization rate per unit chamber volume. Compared to the unordered charging mode, the charge amount increases by more than 9.5%, and the velocity increases by approximately 5%–8%.