MohammadSadegh KhajueeZadeh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
MohammadSadegh KhajueeZadeh has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Farid Tootoonchian
Electrical Engineering Department, Iran University of Science and Technology, Tehran, Iran
5 shared publications - Zahra Nasiri-Gheidari
Electrical Engineering Department, Sharif University of Technology, Tehran, Iran
3 shared publications - Abolfazl Vahedi
Department of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran
2 shared publications Ali Amini
Department of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran
2 shared publications- Ali Pourghoraba
Department of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran
2 shared publications - Mahdi Emadaleslami
Electrical and Computer Engineering Department, Tarbiat Modares University, Tehran, Iran
2 shared publications
Latest Publications
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-8
Hybrid Resolver Model Generalization for Fault Condition Modeling: A Promising Tool for Reliability Study
Resolvers, like all electromagnetic devices, are constantly under investigation, both operationally and structurally. In this regard, proposing a modeling methodology that can save significant time without compromising accuracy is a big honor, as each of the other analytical methodologies fails to meet at least one of the above conditions. In this study, a generalized hybrid model is suggested that, in addition to the above benefits, has sufficient capability to ease reliability study in the field of resolvers, where a large number of faulty conditions must be investigated under different operating conditions, including changes in angular velocity, voltage, and frequency of excitation—all of which are highlighted in the context of fault coverage. This model also serves as a promising tool for generating large datasets, which is advantageous for fault diagnosis. A resolver with a non-uniform airgap is chosen as a case study to challenge the suggested model, particularly in relation to eccentricity faults. We generalize the suggested model to account for the most common faulty conditions of resolvers: inter-turn short circuits in signal and excitation windings, as well as static and dynamic eccentricity faults. The close agreement between the results of the suggested model and those from Time-Stepping Finite Element Analysis (TS-FEA), along with significant time savings in both healthy and faulty conditions, highlights the generality and proficiency of the suggested model. Finally, the case study is prototyped, and we verify the accuracy of the suggested model experimentally.
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-8
Hybrid Resolver Model Generalization for Fault Condition Modeling: A Promising Tool for Reliability Study
Resolvers, like all electromagnetic devices, are constantly under investigation, both operationally and structurally. In this regard, proposing a modeling methodology that can save significant time without compromising accuracy is a big honor, as each of the other analytical methodologies fails to meet at least one of the above conditions. In this study, a generalized hybrid model is suggested that, in addition to the above benefits, has sufficient capability to ease reliability study in the field of resolvers, where a large number of faulty conditions must be investigated under different operating conditions, including changes in angular velocity, voltage, and frequency of excitation—all of which are highlighted in the context of fault coverage. This model also serves as a promising tool for generating large datasets, which is advantageous for fault diagnosis. A resolver with a non-uniform airgap is chosen as a case study to challenge the suggested model, particularly in relation to eccentricity faults. We generalize the suggested model to account for the most common faulty conditions of resolvers: inter-turn short circuits in signal and excitation windings, as well as static and dynamic eccentricity faults. The close agreement between the results of the suggested model and those from Time-Stepping Finite Element Analysis (TS-FEA), along with significant time savings in both healthy and faulty conditions, highlights the generality and proficiency of the suggested model. Finally, the case study is prototyped, and we verify the accuracy of the suggested model experimentally.
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (4) , 3115-3125
Model-Agnostic Meta-Learning for Fault Diagnosis of Induction Motors in Data-Scarce Environments with Varying Operating Conditions and Electric Drive Noise
Reliable mechanical fault detection with limited data is crucial for the effective operation of induction machines, particularly given the real-world challenges present in industrial datasets, such as significant imbalances between healthy and faulty samples and the scarcity of data representing faulty conditions. This research introduces an innovative meta-learning approach to address these issues, focusing on mechanical fault detection in induction motors across diverse operating conditions while mitigating the adverse effects of drive noise in scenarios with limited data. The process of identifying faults under varying operating conditions is framed as a few-shot classification challenge and approached through a model-agnostic meta-learning strategy. Specifically, this approach begins with training a meta-learner across multiple interconnected fault-diagnosis tasks conducted under different operating conditions. In this stage, cross-entropy is utilized to optimize parameters and develop a robust representation of the tasks. Subsequently, the parameters of the meta-learner are fine-tuned for new tasks, enabling rapid adaptation using only a small number of samples. This method achieves excellent accuracy in fault detection across various conditions, even when data availability is restricted. The findings indicate that the proposed model outperforms other sophisticated techniques, providing enhanced generalization and quicker adaptation. The accuracy of fault diagnosis reaches a minimum of 99%, underscoring the model's effectiveness for reliable fault identification.
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (4) , 3115-3125
Model-Agnostic Meta-Learning for Fault Diagnosis of Induction Motors in Data-Scarce Environments with Varying Operating Conditions and Electric Drive Noise
Reliable mechanical fault detection with limited data is crucial for the effective operation of induction machines, particularly given the real-world challenges present in industrial datasets, such as significant imbalances between healthy and faulty samples and the scarcity of data representing faulty conditions. This research introduces an innovative meta-learning approach to address these issues, focusing on mechanical fault detection in induction motors across diverse operating conditions while mitigating the adverse effects of drive noise in scenarios with limited data. The process of identifying faults under varying operating conditions is framed as a few-shot classification challenge and approached through a model-agnostic meta-learning strategy. Specifically, this approach begins with training a meta-learner across multiple interconnected fault-diagnosis tasks conducted under different operating conditions. In this stage, cross-entropy is utilized to optimize parameters and develop a robust representation of the tasks. Subsequently, the parameters of the meta-learner are fine-tuned for new tasks, enabling rapid adaptation using only a small number of samples. This method achieves excellent accuracy in fault detection across various conditions, even when data availability is restricted. The findings indicate that the proposed model outperforms other sophisticated techniques, providing enhanced generalization and quicker adaptation. The accuracy of fault diagnosis reaches a minimum of 99%, underscoring the model's effectiveness for reliable fault identification.
- 4 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (18) , 21147-21154
Developing a Very Fast and Accurate Model of Linear Sinusoidal Area Resolver Considering End Effects and Faulty Conditions
Similar to each electromagnetic device, resolvers’ design and performance investigation through an accurate and preferably fast tool are necessary. On the other hand, owing to the 3D geometry of the Sinusoidal Area (SA) linear resolver, its performance evaluation and iterative design procedure is a big challenge, especially through 3D Time-Stepping Finite Element Analysis (3D-TSFEA) and common analytical methods. Accordingly, the following study suggests a hybrid linear resolver model overcome the above challenges. The suggested hybrid linear model can precisely consider the longitudinal end effect and faulty resolver conditions. Additionally, implementing the suggested hybrid model in MATLAB/SIMULINK gives the capability of some investigations, such as resolver condition monitoring alongside the drive control system. Verifying the above merits, including high accuracy and significant time-saving of the suggested hybrid model, was shown by comparing its results with those of 3D-TSFEA and experimental measurements.
- 4 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (18) , 21147-21154
Developing a Very Fast and Accurate Model of Linear Sinusoidal Area Resolver Considering End Effects and Faulty Conditions
Similar to each electromagnetic device, resolvers’ design and performance investigation through an accurate and preferably fast tool are necessary. On the other hand, owing to the 3D geometry of the Sinusoidal Area (SA) linear resolver, its performance evaluation and iterative design procedure is a big challenge, especially through 3D Time-Stepping Finite Element Analysis (3D-TSFEA) and common analytical methods. Accordingly, the following study suggests a hybrid linear resolver model overcome the above challenges. The suggested hybrid linear model can precisely consider the longitudinal end effect and faulty resolver conditions. Additionally, implementing the suggested hybrid model in MATLAB/SIMULINK gives the capability of some investigations, such as resolver condition monitoring alongside the drive control system. Verifying the above merits, including high accuracy and significant time-saving of the suggested hybrid model, was shown by comparing its results with those of 3D-TSFEA and experimental measurements.
- Open Access
- 2 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 81224-81255
A Comprehensive Review on Flywheel Energy Storage Systems: Survey on Electrical Machines, Power Electronics Converters, and Control Systems
Finding efficient and satisfactory energy storage systems (ESSs) is one of the main concerns in the industry. Flywheel energy storage system (FESS) is one of the most satisfactory energy storage which has lots of advantages such as high efficiency, long lifetime, scalability, high power density, fast dynamic, deep charging, and discharging capability. The above features are necessary for electric vehicles (EVs), railways, renewable energy systems, and microgrids. Also, electrical machines, power electronics converters, and control systems are the cores of energy transfer in FESS. Therefore, they have a critical role in determining efficiency, power rating, power factor, cost, angular velocity, and volume of FESS. So, in this study, the FESS configuration, including the flywheel (rotor), electrical machine, power electronics converter, control system, and bearing are reviewed, individually and comprehensively. Additionally, the mentioned components have been categorized to be a guide for future research. The investigated electrical machines are compared by Finite Element Analysis (FEA). Subsequently, our laboratory’s measurement results are reviewed experimentally showing the progress in the field of FESS, such as designing robust control algorithms and an Interior Permanent Magnet-Synchronous Reluctance Machine (IPM-SynRM) to use in FESS.
- 2 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 81224-81255
Open AccessA Comprehensive Review on Flywheel Energy Storage Systems: Survey on Electrical Machines, Power Electronics Converters, and Control Systems
Finding efficient and satisfactory energy storage systems (ESSs) is one of the main concerns in the industry. Flywheel energy storage system (FESS) is one of the most satisfactory energy storage which has lots of advantages such as high efficiency, long lifetime, scalability, high power density, fast dynamic, deep charging, and discharging capability. The above features are necessary for electric vehicles (EVs), railways, renewable energy systems, and microgrids. Also, electrical machines, power electronics converters, and control systems are the cores of energy transfer in FESS. Therefore, they have a critical role in determining efficiency, power rating, power factor, cost, angular velocity, and volume of FESS. So, in this study, the FESS configuration, including the flywheel (rotor), electrical machine, power electronics converter, control system, and bearing are reviewed, individually and comprehensively. Additionally, the mentioned components have been categorized to be a guide for future research. The investigated electrical machines are compared by Finite Element Analysis (FEA). Subsequently, our laboratory’s measurement results are reviewed experimentally showing the progress in the field of FESS, such as designing robust control algorithms and an Interior Permanent Magnet-Synchronous Reluctance Machine (IPM-SynRM) to use in FESS.
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-9
Static Eccentricity Fault Location Diagnosis in Resolvers Using Siamese-Based Few-Shot Learning
Static eccentricity in the resolver, with higher probability and severity occurrence, gradually injects instability into the drive system; thus, its exact location diagnosis is mandatory. Whereas most existing investigations rely on frequency analysis of signal voltages for resolver fault diagnosis, artificial intelligence (AI) is at the center of attention for electric motors fault diagnosis. Yet, sufficient data collection brings some challenges for AI. Therefore, intrigued by the idea of few-shot learning to overcome the data scarcity challenge, a Convolutional Neural Siamese network is employed with limited data to diagnose the static eccentricity location under each stator tooth via raw signal voltages, which is ordinarily employed for rotor angle extraction. Accordingly, a Siamese network learns to yield the probability of signal pairs being similar by distance unit. A lab-built Time-Stepping Finite Element Analysis (TS-FEA) and a resolver test-bench dataset under different training sizes, noise existence, and new unseen locations challenges are employed to assess the employed Siamese network. Comparing the employed Siamese network with One Dimension-Convolutional Neural Network (1D-CNN) shows its proficiency and superiority.
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-9
Static Eccentricity Fault Location Diagnosis in Resolvers Using Siamese-Based Few-Shot Learning
Static eccentricity in the resolver, with higher probability and severity occurrence, gradually injects instability into the drive system; thus, its exact location diagnosis is mandatory. Whereas most existing investigations rely on frequency analysis of signal voltages for resolver fault diagnosis, artificial intelligence (AI) is at the center of attention for electric motors fault diagnosis. Yet, sufficient data collection brings some challenges for AI. Therefore, intrigued by the idea of few-shot learning to overcome the data scarcity challenge, a Convolutional Neural Siamese network is employed with limited data to diagnose the static eccentricity location under each stator tooth via raw signal voltages, which is ordinarily employed for rotor angle extraction. Accordingly, a Siamese network learns to yield the probability of signal pairs being similar by distance unit. A lab-built Time-Stepping Finite Element Analysis (TS-FEA) and a resolver test-bench dataset under different training sizes, noise existence, and new unseen locations challenges are employed to assess the employed Siamese network. Comparing the employed Siamese network with One Dimension-Convolutional Neural Network (1D-CNN) shows its proficiency and superiority.
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (17) , 19176-19183
Axial Flux Resolver Versus Radial Flux One From Fault Tolerability Point of View
Reliability and fault tolerability of the resolvers, as the first-choice rotor angle sensor in Permanent Magnet Synchronous Motors (PMSM), are big concerns. Among the resolver categories, the assessment of axial and radial flux resolvers over each other is an interesting subject, which will serve as a guideline for engineering society. On the other hand, resolver errors will significantly degrade the drive system and primary motor operating conditions, injecting more stress into the motor. Therefore, it is clear that the resolver’s faulty conditions can lead to thermal changes in PMSM, which shows the connection between the frequency of resolver faults and the heat level of the motor frame. Based on this theory, in the following, two 5-X axial and radial flux resolvers are the case studies. Presenting how the failure rate calculation under faulty conditions through thermal modeling is the main aim of this reliability analysis. Finally, the accuracy of the employed 3D Time-stepping Finite Element Analysis (3D-TSFEA) is verified experimentally in both configurations (Axial and Radial) in healthy and faulty operating conditions.
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (17) , 19176-19183
Axial Flux Resolver Versus Radial Flux One From Fault Tolerability Point of View
Reliability and fault tolerability of the resolvers, as the first-choice rotor angle sensor in Permanent Magnet Synchronous Motors (PMSM), are big concerns. Among the resolver categories, the assessment of axial and radial flux resolvers over each other is an interesting subject, which will serve as a guideline for engineering society. On the other hand, resolver errors will significantly degrade the drive system and primary motor operating conditions, injecting more stress into the motor. Therefore, it is clear that the resolver’s faulty conditions can lead to thermal changes in PMSM, which shows the connection between the frequency of resolver faults and the heat level of the motor frame. Based on this theory, in the following, two 5-X axial and radial flux resolvers are the case studies. Presenting how the failure rate calculation under faulty conditions through thermal modeling is the main aim of this reliability analysis. Finally, the accuracy of the employed 3D Time-stepping Finite Element Analysis (3D-TSFEA) is verified experimentally in both configurations (Axial and Radial) in healthy and faulty operating conditions.
- 11 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (17) , 19145-19152
Comprehensive Investigation of the Resolver’s Eccentricity Effect on the Field-Oriented Control of PMSM
Accurate position feedback from a resolver is highly critical for high-performance field-oriented control (FOC) drives, and eccentricity in resolvers negatively affects the drive performance. The current unbalance intensity (CUI) of permanent magnet synchronous motors (PMSM) is a known criterion to evaluate drive stability and can be caused by position feedback error. In this paper, the eccentric resolver operation is comprehensively investigated, and the corresponding CUI is analytically evaluated. Accordingly, the error limit is defined for an acceptable operation under eccentricity without derating the motor control. For this purpose, the relationship between the (a) resolver’s physical geometry, (b) magnitude and the angle of the stator current, and (c) resolver accuracy are presented through surrogate modeling. Using the proposed analytical current model, the resolver geometry is updated in order to improve the eccentricity tolerance and accuracy and lower the CUI. An optimized rotor design is built, and its accuracy and effect on CUI mitigation are experimentally verified.
- 11 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (17) , 19145-19152
Comprehensive Investigation of the Resolver’s Eccentricity Effect on the Field-Oriented Control of PMSM
Accurate position feedback from a resolver is highly critical for high-performance field-oriented control (FOC) drives, and eccentricity in resolvers negatively affects the drive performance. The current unbalance intensity (CUI) of permanent magnet synchronous motors (PMSM) is a known criterion to evaluate drive stability and can be caused by position feedback error. In this paper, the eccentric resolver operation is comprehensively investigated, and the corresponding CUI is analytically evaluated. Accordingly, the error limit is defined for an acceptable operation under eccentricity without derating the motor control. For this purpose, the relationship between the (a) resolver’s physical geometry, (b) magnitude and the angle of the stator current, and (c) resolver accuracy are presented through surrogate modeling. Using the proposed analytical current model, the resolver geometry is updated in order to improve the eccentricity tolerance and accuracy and lower the CUI. An optimized rotor design is built, and its accuracy and effect on CUI mitigation are experimentally verified.
- 15 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-8
Reliability Analysis of Two Resolver Configurations Under Faulty Conditions in 2DOF System
The existence of resolvers in the Two Degree of Freedom (2DOF) control algorithm is mandatory due to their improved performance in harsh environments. However, resolver’s errors significantly influence the control system’s stability. Therefore, it is required to comprehensively investigate the resolver’s reliability under fault conditions. In this regard, an employed assessment model is presented. Subsequently, the failure modes in the 2DOF and One Degree of Freedom (1DOF) resolvers’ configurations are investigated thoroughly. Among the methods used to assess reliability, the Markov model is chosen for the reliability analyses. After meeting all of the above, the faulty conditions are injected into the resolvers’ configurations by using Finite Elements Analysis (FEA). The measurement of resolvers’ accuracy under the above conditions is done. Accordingly, the reliability metrics are chosen appropriately to define the reliability state of the resolver. Comparing the reliability is done numerically between a 2DOF integrated resolver and two 1DOF resolvers. Finally, examinations are done practically to show the accuracy status of the resolvers under faulty conditions. The outcomes can be used as a guide to optimally choose the resolvers’ configuration in 2DOF controls.
- 15 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-8
Reliability Analysis of Two Resolver Configurations Under Faulty Conditions in 2DOF System
The existence of resolvers in the Two Degree of Freedom (2DOF) control algorithm is mandatory due to their improved performance in harsh environments. However, resolver’s errors significantly influence the control system’s stability. Therefore, it is required to comprehensively investigate the resolver’s reliability under fault conditions. In this regard, an employed assessment model is presented. Subsequently, the failure modes in the 2DOF and One Degree of Freedom (1DOF) resolvers’ configurations are investigated thoroughly. Among the methods used to assess reliability, the Markov model is chosen for the reliability analyses. After meeting all of the above, the faulty conditions are injected into the resolvers’ configurations by using Finite Elements Analysis (FEA). The measurement of resolvers’ accuracy under the above conditions is done. Accordingly, the reliability metrics are chosen appropriately to define the reliability state of the resolver. Comparing the reliability is done numerically between a 2DOF integrated resolver and two 1DOF resolvers. Finally, examinations are done practically to show the accuracy status of the resolvers under faulty conditions. The outcomes can be used as a guide to optimally choose the resolvers’ configuration in 2DOF controls.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (22) , 21592-21599
Analysis of Torsional Vibrations on the Resolver Under Eccentricity in PMSM Drive System
Since any error in the rotor angle caused by the resolver affects the entire PMSM control drive system, it is necessary to investigate its effect on mechanical vibrations. Torsional vibration is accordingly considered in the following study. Thereby, firstly, the effect of resolver errors on the harmonic content of motor current and subsequently Torque Ripple (TR) was investigated. Then, dynamical modeling is done for the generator-motor-resolver set to get the mechanical Frequency Response (FR) resulting from the resolver errors. Based on the above modeling, the Dynamic Equations (DEQ) of the system were derived, and the mechanical characteristics of the set, including natural frequency values and mode shapes, were extracted. Thereafter TR was employed in the DEQs, and the mechanical FR caused by the resolver error was obtained. Eventually, comparing mechanical FR with electrical FR was done according to diagnosis superiority. All analyzes were done using experimentally verified models.
- 3 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (22) , 21592-21599
Analysis of Torsional Vibrations on the Resolver Under Eccentricity in PMSM Drive System
Since any error in the rotor angle caused by the resolver affects the entire PMSM control drive system, it is necessary to investigate its effect on mechanical vibrations. Torsional vibration is accordingly considered in the following study. Thereby, firstly, the effect of resolver errors on the harmonic content of motor current and subsequently Torque Ripple (TR) was investigated. Then, dynamical modeling is done for the generator-motor-resolver set to get the mechanical Frequency Response (FR) resulting from the resolver errors. Based on the above modeling, the Dynamic Equations (DEQ) of the system were derived, and the mechanical characteristics of the set, including natural frequency values and mode shapes, were extracted. Thereafter TR was employed in the DEQs, and the mechanical FR caused by the resolver error was obtained. Eventually, comparing mechanical FR with electrical FR was done according to diagnosis superiority. All analyzes were done using experimentally verified models.
- 15 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-8
Development of a Hybrid Reference Model for Performance Evaluation of Resolvers
Resolver is an electromagnetic position sensor typically used in the closed-loop control of permanent magnet synchronous motors (PMSMs). In terms of structure and principle of operation, resolvers are very similar to electrical machines. In this regard, different numerical and analytical models have been developed for the performance prediction of a resolver, with a compromise between computational burden and accuracy. Therefore, a fast and accurate hybrid model of the resolver is presented in this article, which can be used for resolvers with different structures. Additionally, this model can easily be implemented in software such as MATLAB/SIMULINK. The performance of different variable reluctance (VR) and wound rotor (WR) resolvers calculated from the model and finite element analysis (FEA) is compared to show the value of the proposed model. The model is also used to improve the position determination accuracy of a VR resolver. Finally, a prototype of the optimized resolver is used for experimental tests to confirm the validity of the analysis.
- 15 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-8
Development of a Hybrid Reference Model for Performance Evaluation of Resolvers
Resolver is an electromagnetic position sensor typically used in the closed-loop control of permanent magnet synchronous motors (PMSMs). In terms of structure and principle of operation, resolvers are very similar to electrical machines. In this regard, different numerical and analytical models have been developed for the performance prediction of a resolver, with a compromise between computational burden and accuracy. Therefore, a fast and accurate hybrid model of the resolver is presented in this article, which can be used for resolvers with different structures. Additionally, this model can easily be implemented in software such as MATLAB/SIMULINK. The performance of different variable reluctance (VR) and wound rotor (WR) resolvers calculated from the model and finite element analysis (FEA) is compared to show the value of the proposed model. The model is also used to improve the position determination accuracy of a VR resolver. Finally, a prototype of the optimized resolver is used for experimental tests to confirm the validity of the analysis.