SKSatoshi Kurai

Satoshi Kurai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Satoshi Kurai has a total of 85 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of F-value on GaN channel performance in N-polar GaN/AlGaN/AlN structure

    by Aina Hiyama Zazuli, Kai Fujii, Fumiya Yamanaka, Taisei Kimoto, Haruki Danbata, Amane Hayashiuchi, Satoshi Kurai, Narihito Okada, Yoichi Yamada

  • Open Access

    Improved electrical properties of N-polar GaN grown via MOVPE with TMGa pulsed supply method

    by Aina Hiyama Zazuli, Fumiya Yamanaka, Taisei Kimoto, MeiLin Feng, Haruki Danbata, Amane Hayashiuchi, Kei Sunai, Haruka Tokumoto, Satoshi Kurai, Narihito Okada


  • Thermal redistribution of valence-band holes and optical polarization in AlGaN (225–230 nm) far-UVC quantum wells on sapphire and IQE evaluation

    by M. Ajmal Khan, Hideaki Murotani, Kaichi Tani, Satoshi Kurai, Narihito Okada, Mitsuhiro Muta, Yasushi Iwaisako, H. Hirayama, Yoichi Yamada

    Accurate evaluation of internal quantum efficiency (IQE) in far-ultraviolet-C AlGaN light-emitting diodes relies on proper treatment of light extraction efficiency, which is commonly assumed to be temperature independent. Here, we show that this assumption breaks down due to the temperature dependence of band edge optical polarization in high-Al-content AlGaN multiple quantum wells (MQWs). Polarization- and temperature-dependent photoluminescence measurements are performed on 225 and 230 nm AlGaN MQWs grown on partially relaxed n-AlGaN buffers on c-sapphire. The emission is dominated by the E ∥ c-polarized component over the entire temperature range, indicating that the crystal-field split-off hole band forms the topmost valence band. At 10 K, the optical polarization degree is ρ = −0.76 for the 225 nm MQWs and ρ = −0.49 for the 230 nm MQWs, decreasing to ρ = −0.40 and −0.17, respectively, at 295 K, consistent with thermal redistribution of holes among closely spaced valence bands. Analysis based on a Boltzmann population model yields crystal-field split-off–heavy-hole energy separations of 11 and 6 meV. We demonstrate that neglecting temperature-dependent polarization leads to significant errors in IQE estimation, and here we report corrected room-temperature “estimated upper limits” IQEs of 16.7% and 11%, respectively, for 225 and 230 nm MQWs due to the active non-radiative recombination centers at 10 K.


  • Temperature Dependence of Optical Polarization in AlGaN‐Based Multiple Quantum Wells with Emission Wavelengths of 220–260 nm

    by Hideaki Murotani, Hiromasa Hayashi, Aoi Sasaki, Kaichi Tani, Satoshi Kurai, Narihito Okada, Ryota Akaike, Hideto Miyake, Yoichi Yamada

    The optical polarization properties of band‐edge emission in AlGaN‐based multiple quantum wells (MQWs) grown on face‐to‐face‐annealed sputter‐deposited AlN templates are investigated by polarization‐dependent photoluminescence spectroscopy. It is found that luminescence polarized with E || c is predominant in the MQW with an emission wavelength of ≈220 nm, while luminescence polarized with E ⊥ c is predominant in the MQWs with emission wavelengths of about 240 and 260 nm. In addition, the absolute values of the optical polarization degrees (OPDs) of the MQWs with emission wavelengths of ≈220 and 260 nm decrease with increasing temperature. This change can be explained by the thermal redistribution of excitons or carriers between valence bands. Furthermore, the effect of the temperature dependence of the OPD on the evaluation of internal quantum efficiency (IQE) is discussed, and it is found that the change in the OPD with temperature may lead to both overestimation and underestimation of the IQE.


  • Open Access

    Impact of thick N-polar AlN growth on crystalline quality and electrical properties of N-polar GaN/AlGaN/AlN FET

    by Aina Hiyama Zazuli, Taketo Kowaki, Minagi Miyamoto, Koki Hanasaku, Daisuke Inahara, Kai Fujii, Taisei Kimoto, Ryosuke Ninoki, Satoshi Kurai, Narihito Okada, et al.

    In this study, we attempted to fabricate N-polar GaN/AlGaN/AlN heterostructure FET by changing the thickness of the AlN layer. An Al-polar tiny-pit AlN layer and a polarity inversion method were used to grow N-polar AlN on vicinal sapphire via the metal-organic vapor phase epitaxy. The samples with an AlN thickness of up to 3.4 μm exhibited a crack-free surface. Additionally, the twist component of the crystal quality improved with an increasing AlN thickness. Consequently, the mobility, sheet conductivity, and surface flatness improved. The FET fabricated from the sample with a thicker AlN layer achieved a higher drain current of 279 mA mm−1 at a gate bias of V G = 3 V.


  • Open Access

    Fabrication of high-quality Al-polar and N-polar AlN templates through self-forming tiny-pit layers and polarity inversion

    by Narihito Okada, Ryota Hidaka, Taketo Kowaki, Takahiro Saito, Yoshihiro Sugawara, Daisaku Yokoe, Yongzhao Yao, Yukari Ishikawa, Satoshi Kurai, Yoichi Yamada, et al.

    A fabrication technique for high-quality AlN templates using only metalorganic vapor phase epitaxy, which involves a tiny-pit AlN layer optimized by changing the growth temperature and V/III ratio, is proposed. Combining the tiny-pit AlN layer with the main AlN layer can be beneficial for achieving epitaxial lateral overgrowth and reducing threading dislocation density (TDD). According to transmission electron microscopy observations, the TDD in the AlN layer on the tiny-pit layer was 7.3 × 109 cm–2, and the TDD was further reduced to 2.6 × 108 cm–2 by adopting multiple tiny-pit layers. Tiny voids were observed at the interface between the tiny-pit AlN and main AlN layers, and the radius of curvature of the AlN layer also increased compared with that for a conventional AlN template by reducing stress in the AlN layer. In addition, the N-polar AlN layer was grown using Al-polar tiny-pit AlN layers through polarity inversion on a sapphire substrate with an offcut angle of 2.0°. Consequently, it was found that the Al-polar tiny-pit AlN is highly effective in improving the crystalline quality of the N-polar AlN layer. The surface flatness of the N-polar AlN layer with the tiny-pit layer and polarity inversion retained the conventional N-polar AlN template.


  • Electrical Properties of N‐Polar GaN/AlGaN/AlN Grown via Metal‐Organic Vapor Phase Epitaxy

    by Aina Hiyama Zazuli, Aina Hiyama Zazuli, Aina Hiyama Zazuli, Taketo Kowaki, Taketo Kowaki, Taketo Kowaki, Minagi Miyamoto, Minagi Miyamoto, Minagi Miyamoto, Koki Hanasaku, et al.

    The metal‐organic vapor phase epitaxy (MOVPE) method faces several challenges when used for the growth of N‐polar GaN on foreign substrates, including the presence of a rough surface morphology characterized by step bunching or hexagonal hillocks. In this study, it is aimed to address these issues by establishing optimal growth conditions for the MOVPE method, enabling the growth of N‐polar GaN/Al0.9Ga0.1N/AlN heterostructures with a smooth surface morphology on a vicinal sapphire substrate. The formation of 2D electron gas (2DEG) in N‐polar GaN/AlGaN/AlN prepared using MOVPE is discussed. Additionally, in the study, the impact of growth conditions, such as temperature and V/III ratio, on the electrical properties of N‐polar GaN is investigated. In the results, it is revealed that growth at lower temperatures and a V/III ratio of 30 000 effectively suppresses 3D growth. Moreover, an increase in the V/III ratio correlates with a decrease in residual impurity concentrations (C and H); hence, electron mobility improves. Moreover, the N‐polar GaN/AlGaN/AlN field‐effect transistor, grown under optimized conditions, exhibits a higher maximum drain–source current (IDmax). In these results, possibilities are broadened for the high performance of N‐polar GaN channel high‐electron‐mobility transistors through MOVPE.


  • Effect of the Twist Crystallinity of N‐Polar AlN Underlayer on the Electrical Properties of GaN/AlN Structures

    by Taketo Kowaki, Koki Hanasaku, Minagi Miyamoto, Aina Hiyama Zazuli, Daisuke Inahara, Kai Fujii, Taisei Kimoto, Ryosuke Ninoki, Satoshi Kurai, Narihito Okada, et al.

    Recently, N‐polar GaN/AlGaN/AlN high‐electron‐mobility transistors (HEMTs) have been demonstrated using molecular beam epitaxy (MBE). However, the MBE method is not suitable for mass production because of the need for ultrahigh vacuum, small chamber size, and long deposition time. This study fabricates N‐polar GaN‐ or AlGaN‐channel HEMTs on AlN with polarization directions opposite to those of Ga‐polar GaN‐based HEMTs without any cap layer and demonstrates field‐effect transistor static characteristics. In this article, the focus is on the crystal quality of the underlying layer and the effect of crystalline quality on electrical properties is investigated. The crystalline quality of the twist component of the N‐polar AlN layer is improved by combining the Al‐polar tiny‐pit layer and polarity inversion from Al‐ to N‐polar. Finally, it is shown that the crystalline quality of the twist component is a crucial factor for improving the electron mobility of the N‐polar GaN channel and simultaneously increasing IDS.


  • Growth Mechanism of N‐Polar GaN on Vicinal N‐Polar AlN Templates in Metal‐Organic Vapor Phase Epitaxy

    by Minagi Miyamoto, Koki Hanasaku, Taketo Kowaki, Daisuke Inahara, Aina Hiyama Zazuli, Kai Fujii, Taisei Kimoto, Ryosuke Ninoki, Satoshi Kurai, Narihito Okada, et al.

    In this study, nitrogen‐polar (N‐polar) GaN/Al0.9Ga0.1N/aluminum nitride (AlN) structures are grown on a sapphire substrate with an offcut angle of 2.0° from the m axis using metal‐organic vapor phase epitaxy. Low‐growth temperatures of N‐polar GaN result in a shorter Ga‐migration length, and 2D GaN growth is successfully achieved. The growth temperature and V/III ratio dependence are investigated for N‐polar GaN. As a result, high‐quality and flat N‐polar GaN is successfully grown at a low temperature of 650 °C at a high V/III ratio and nonequilibrium conditions. Through X‐ray reciprocal space mapping, N‐polar GaN can be grown coherently on a N‐polar AlN template at low temperatures around 650 °C, relaxing at higher temperatures.


  • Well Number Dependence of Internal Quantum Efficiency in AlGaN Quantum Wells on Low‐Dislocation Sputtered AlN Templates

    by Kosuke Inai, Ryota Oshimura, Kunio Himeno, Megumi Fujii, Yuta Onishi, Satoshi Kurai, Narihito Okada, Kenjiro Uesugi, Hideto Miyake, Yoichi Yamada

    The internal quantum efficiency (IQE) and cathodoluminescence intensity line profile of AlGaN multiple quantum well (MQW) structures on low‐dislocation face‐to‐face annealed sputtered AlN (FFA Sp‐AlN) and on conventional metalorganic vapor‐phase epitaxy‐grown AlN (MOVPE‐AlN) templates are evaluated and the effect of the number of quantum wells (QWs) on the IQE is discussed. The higher IQE in the FFA samples is probably due to the lower threading dislocation (TD) density; however, the IQE also increases with the number of QWs although the TD density remains constant. Effective diffusion length increases with the number of QWs, indicating that the AlGaN MQW layer helps to suppress point defect diffusion, resulting in IQE increase. Furthermore, the segregation of point defects into the TDs and point defect diffusion via the TDs may explain the difference in the IQE improvement rate between the MQWs on the FFA Sp‐AlN and MOVPE‐AlN templates.