Nurcan Karaca
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nurcan Karaca has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Demet Aydınoğlu
Armutlu Vocational School, Department of Food Processing, Yalova University
1 shared publication Hüseyin Yıldırım
Department of Polymer Material Engineering, Faculty of Engineering, Yalova University, Yalova, Turkey
1 shared publication- Yasemin Tamer
Department of Polymer Material Engineering, Yalova University, Yalova, Turkey
1 shared publication
Latest Publications
- 18 October 2026
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- p. 1-25
Carrageenan/Gallic Acid Blend Hydrogel Films for Potential Use as Natural Moisture Scavengers in Active Food Packaging
1. Today, one of the most important issues of the food industry is extending the shelf life of food products and preserving food safety, nutritional values as well as sensory properties such as tas...
- 18 October 2026
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- p. 1-25
Carrageenan/Gallic Acid Blend Hydrogel Films for Potential Use as Natural Moisture Scavengers in Active Food Packaging
1. Today, one of the most important issues of the food industry is extending the shelf life of food products and preserving food safety, nutritional values as well as sensory properties such as tas...
- 31 March 2023
- Published by Springer Nature in Journal of Polymer Research
- Vol. 30 (4) , 1-15
Preparation of the polymerizable novel high refractive index hybrid carbazole-based polysiloxane oligomers by a sol–gel condensation reaction
- 31 March 2023
- Published by Springer Nature in Journal of Polymer Research
- Vol. 30 (4) , 1-15
Preparation of the polymerizable novel high refractive index hybrid carbazole-based polysiloxane oligomers by a sol–gel condensation reaction
- Open Access
- 1 March 2023
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 23 (1) , 198-207
Preparation of Composite Hydrogels with Silica Nanoparticles by Photoinitiated Polymerization Reaction
In this study, (3-mercaptopropyl) trimethoxysilane (MPTMS) modified silica nanoparticles (SiO2-MPTMS) were successfully prepared. The average size of SiO2-MPTMS nanoparticles was measured by Dynamic Light Scattering (DLS) as 341 nm in ethanol, while Scanning Transmission Electron Microscopy (STEM) analyzes confirmed that the nanoparticles were nano-sized and revealed that their shapes were spherical. Then, 3D nanocomposite hydrogels were prepared by incorporating SiO2-MPTMS nanoparticles in various ratios (0.25, 0.50, 0.75 and 1.0 wt %) into an acrylate resin consisting of N-isopropyl acrylamide (NIPAM) and polyethylene glychol diacrylate (PEGDA; as a crosslinker) by the photoinitiated polymerization reaction with Dimethoxy-2-phenylacetophenone (DMPA; as a photoinitiator). By Thermal Gravimetric Analyzer (TGA) measurements, it was determined that the nanocomposite hydrogels maintained their thermal stability up to 330 0C and the thermal degradation steps were close to each other. Scanning Electron Microscopy (SEM) study showed that the neat and nanocomposite hydrogels’ morphological structures were in the porous and smooth scaffold, and also that the SiO2-MPTMS nanoparticles (0.50 wt %) were homogeneously distributed in the network structures of hydrogels, localized in the bonds.
- 1 March 2023
- Published by Afyon Kocatepe Universitesi Fen Ve Muhendislik Bilimleri Dergisi in Afyon Kocatepe University Journal of Sciences and Engineering
- Vol. 23 (1) , 198-207
Open AccessPreparation of Composite Hydrogels with Silica Nanoparticles by Photoinitiated Polymerization Reaction
In this study, (3-mercaptopropyl) trimethoxysilane (MPTMS) modified silica nanoparticles (SiO2-MPTMS) were successfully prepared. The average size of SiO2-MPTMS nanoparticles was measured by Dynamic Light Scattering (DLS) as 341 nm in ethanol, while Scanning Transmission Electron Microscopy (STEM) analyzes confirmed that the nanoparticles were nano-sized and revealed that their shapes were spherical. Then, 3D nanocomposite hydrogels were prepared by incorporating SiO2-MPTMS nanoparticles in various ratios (0.25, 0.50, 0.75 and 1.0 wt %) into an acrylate resin consisting of N-isopropyl acrylamide (NIPAM) and polyethylene glychol diacrylate (PEGDA; as a crosslinker) by the photoinitiated polymerization reaction with Dimethoxy-2-phenylacetophenone (DMPA; as a photoinitiator). By Thermal Gravimetric Analyzer (TGA) measurements, it was determined that the nanocomposite hydrogels maintained their thermal stability up to 330 0C and the thermal degradation steps were close to each other. Scanning Electron Microscopy (SEM) study showed that the neat and nanocomposite hydrogels’ morphological structures were in the porous and smooth scaffold, and also that the SiO2-MPTMS nanoparticles (0.50 wt %) were homogeneously distributed in the network structures of hydrogels, localized in the bonds.
- 2 February 2023
- Published by SAGE Publications in High Performance Polymers
- Vol. 35 (6) , 581-592
A novel carbazole based bismaleimide monomer: Synthesis, characterization, thermal and optical properties
In this study, a novel bismaleimide monomer: Carbazole-Bismaleimide (Cz-BisMI) was introduced to the literature as a first. Cz-BisMI was synthesized by a catalytic cyclodehydration reaction of 3,6-bismalemic acid carbazole which is an intermediate product obtained by an imidization reaction of 3,6-diamino carbazole. Then, the chemical structure of Cz-BisMI was elucidated by FT-IR, 1H NMR, 13C NMR and LC-MS spectroscopies. The thermal properties of Cz-BisMI were investigated by DSC in comparison with a commercial bismaleimide monomer, 4,4-bismaleimidophenylmethane (DPM-BisMI). Cz-BisMI has a melting point of 192°C and also, the onset temperature of the exothermic curve was measured as 293°C. Furthermore, it was determined that Cz-BisMI has a 35.6 percent larger processing window than DPM-BisMI. The spin-coated films of Cz-BisMI showed a high refractive index in the range of 1.61 to 1.50 between 400 and 650 nm with good transparency of over 85%. On the other hand, a new poly(bismaleimide): P(Cz-BisMI)s containing carbazole units was prepared by the self-polymerization process of Cz-BisMI. P(Cz-BisMI)s showed a high thermal transition temperature of 356°C. In conclusion, Cz-BisMI is a viable choice as a bismaleimide monomer for the development of opto-electronic materials due to its enhanced optical properties and thermal behavior.
- 2 February 2023
- Published by SAGE Publications in High Performance Polymers
- Vol. 35 (6) , 581-592
A novel carbazole based bismaleimide monomer: Synthesis, characterization, thermal and optical properties
In this study, a novel bismaleimide monomer: Carbazole-Bismaleimide (Cz-BisMI) was introduced to the literature as a first. Cz-BisMI was synthesized by a catalytic cyclodehydration reaction of 3,6-bismalemic acid carbazole which is an intermediate product obtained by an imidization reaction of 3,6-diamino carbazole. Then, the chemical structure of Cz-BisMI was elucidated by FT-IR, 1H NMR, 13C NMR and LC-MS spectroscopies. The thermal properties of Cz-BisMI were investigated by DSC in comparison with a commercial bismaleimide monomer, 4,4-bismaleimidophenylmethane (DPM-BisMI). Cz-BisMI has a melting point of 192°C and also, the onset temperature of the exothermic curve was measured as 293°C. Furthermore, it was determined that Cz-BisMI has a 35.6 percent larger processing window than DPM-BisMI. The spin-coated films of Cz-BisMI showed a high refractive index in the range of 1.61 to 1.50 between 400 and 650 nm with good transparency of over 85%. On the other hand, a new poly(bismaleimide): P(Cz-BisMI)s containing carbazole units was prepared by the self-polymerization process of Cz-BisMI. P(Cz-BisMI)s showed a high thermal transition temperature of 356°C. In conclusion, Cz-BisMI is a viable choice as a bismaleimide monomer for the development of opto-electronic materials due to its enhanced optical properties and thermal behavior.
- 18 October 2022
- Published by Pleiades Publishing Ltd in Polymer Science, Series B
- Vol. 64 (5) , 606-615
Preparation of Photocoated Polysiloxane Nanoparticles from 3-Mercaptopropyl Trimethoxysilane with Furan Substitues by the Photoinitiated Thiol-Ene Reaction
—Using one-pot synthesis, polysiloxane nanoparticles were successfully prepared from 3-mercaptopropyl trimethoxysilane. Next, the nanoparticles were photo-coated with furfuryl methacrylate by photo-initiated Thiol-Ene reaction for grafting furan substitutes on the surface of inorganic cores. In this process, polysiloxane core/poly(furfuryl methacrylate) shell nanoparticles were prepared at different irradiation times, and then their characteristic, morphological and thermal properties were investigated. Fourier transform infrared and solid-state 13C and 29Si nuclear magnetic resonance spectroscopies confirmed the successful photo-coating of the surfaces of nanoparticles. The size of coated nanoparticles prepared by irradiation for 24 h was measured as 186 nm in ethanol by dynamic light scattering, while the average diameter of 100 randomly selected pristine nanoparticles were determined at 42.8 nm by transmission electron microscopy. The coated polysiloxane nanoparticles were investigated by X-ray photoelectron spectroscopy and scanning electron microscopy, which revealed that they have the spherical core-shell structure.
- 18 October 2022
- Published by Pleiades Publishing Ltd in Polymer Science, Series B
- Vol. 64 (5) , 606-615
Preparation of Photocoated Polysiloxane Nanoparticles from 3-Mercaptopropyl Trimethoxysilane with Furan Substitues by the Photoinitiated Thiol-Ene Reaction
—Using one-pot synthesis, polysiloxane nanoparticles were successfully prepared from 3-mercaptopropyl trimethoxysilane. Next, the nanoparticles were photo-coated with furfuryl methacrylate by photo-initiated Thiol-Ene reaction for grafting furan substitutes on the surface of inorganic cores. In this process, polysiloxane core/poly(furfuryl methacrylate) shell nanoparticles were prepared at different irradiation times, and then their characteristic, morphological and thermal properties were investigated. Fourier transform infrared and solid-state 13C and 29Si nuclear magnetic resonance spectroscopies confirmed the successful photo-coating of the surfaces of nanoparticles. The size of coated nanoparticles prepared by irradiation for 24 h was measured as 186 nm in ethanol by dynamic light scattering, while the average diameter of 100 randomly selected pristine nanoparticles were determined at 42.8 nm by transmission electron microscopy. The coated polysiloxane nanoparticles were investigated by X-ray photoelectron spectroscopy and scanning electron microscopy, which revealed that they have the spherical core-shell structure.
- Open Access
- 30 June 2021
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 45 (3) , 761-774
The synthesis and characterization of polyorganosiloxane nanoparticles from 3-mercaptopropyltrimethoxysilane for preparation of nanocomposite films via photoinitiated thiol-ene polymerization
This article describes the synthesis of modified silica nanoparticles (SiO2-MPTMS) via the condensation reaction carried out between silanol moieties of silica nanoparticles and the trialkoxy silyl groups of (3-mercaptopropyl) trimethoxysilane (MPTMS). Then, SiO2-MPTMS nanoparticles in certain amounts (0.5 wt %, 1 wt %, 2.5 wt % and 5 wt %) were incorporated into thiol-ene resins consisting of bisphenol A glycerolate dimethacrylate and trimethylolpropane tris(3-mercaptopropionate) to prepare nanocomposite films via the photoinitiated thiol-ene polymerization in presence of 2,2-Dimethoxy-2-phenylacetophenone 99% as a photoinitiator. Fourier transform infrared spectroscopy, dynamic light scattering, scanning transmission electron microscopy, thermal gravimetric analyzer, and X-ray photoelectron spectrometer were employed to characterize SiO2-MPTMS nanoparticles. It was revealed that the nanosilica surface was successfully grafted by MPTMS with the grafting ratio of 22.9%. Properties of the nanocomposite films such as decomposition temperature, thermal glass transition temperature, tensile strength, hardness, and particle distribution were investigated and the results were compared with each other and neat film. The addition of MPTMS-modified silica particles did not improve the thermal stability of the films. In scanning electron microscopy study, it was seen that 2.5 wt % of these nanoparticles used as additives were about 200 nm in size and dispersed homogeneously in the polymer matrix. The increase in tensile strength of nanocomposite films compared to the neat film was measured as 77.3% maximum.
- 30 June 2021
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 45 (3) , 761-774
Open AccessThe synthesis and characterization of polyorganosiloxane nanoparticles from 3-mercaptopropyltrimethoxysilane for preparation of nanocomposite films via photoinitiated thiol-ene polymerization
This article describes the synthesis of modified silica nanoparticles (SiO2-MPTMS) via the condensation reaction carried out between silanol moieties of silica nanoparticles and the trialkoxy silyl groups of (3-mercaptopropyl) trimethoxysilane (MPTMS). Then, SiO2-MPTMS nanoparticles in certain amounts (0.5 wt %, 1 wt %, 2.5 wt % and 5 wt %) were incorporated into thiol-ene resins consisting of bisphenol A glycerolate dimethacrylate and trimethylolpropane tris(3-mercaptopropionate) to prepare nanocomposite films via the photoinitiated thiol-ene polymerization in presence of 2,2-Dimethoxy-2-phenylacetophenone 99% as a photoinitiator. Fourier transform infrared spectroscopy, dynamic light scattering, scanning transmission electron microscopy, thermal gravimetric analyzer, and X-ray photoelectron spectrometer were employed to characterize SiO2-MPTMS nanoparticles. It was revealed that the nanosilica surface was successfully grafted by MPTMS with the grafting ratio of 22.9%. Properties of the nanocomposite films such as decomposition temperature, thermal glass transition temperature, tensile strength, hardness, and particle distribution were investigated and the results were compared with each other and neat film. The addition of MPTMS-modified silica particles did not improve the thermal stability of the films. In scanning electron microscopy study, it was seen that 2.5 wt % of these nanoparticles used as additives were about 200 nm in size and dispersed homogeneously in the polymer matrix. The increase in tensile strength of nanocomposite films compared to the neat film was measured as 77.3% maximum.