CDCunbao Deng

Cunbao Deng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cunbao Deng has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effects of Ultrasonic Cavitation on Damage Evolution in Coal and Coalbed Methane Production Enhancement

    by Wenhao Deng, Zhixin Jin, Cunbao Deng, Xiaoyang Guo, Lemei Zhang, Yongpeng Fan, Rui Shang, Yuxin He, Hongyu Mao, Zheng Zhang, et al.

    This study addresses the significant increase in gas content and gas pressure caused by the rising proportion of high gas, low-permeability coal seams under high geostress conditions. This problem not only limits the efficient extraction of coalbed methane (CBM) but also poses a serious threat to mining safety. To overcome this challenge, a novel water-based ultrasonic cavitation-enhanced coalbed methane recovery (WUC-ECBM) is proposed. A self-developed multimodal ultrasonic cavitation reaction system is used to treat coal samples at different cavitation power levels (0–1100 W). Mechanical tests are then performed, and the damage evolution process is synchronously characterised using a multichannel acoustic emission monitoring system. Permeability tests are also conducted to evaluate the effect of ultrasonic cavitation on coal seepage performance. The results show that ultrasonic cavitation systematically alters the mechanical behaviour of coal, driving the evolution from microstructural modification to macroscopic mechanical response. The compressive strength decreased by up to 53.71%, and the elastic modulus fell to 1.34 GPa, indicating a marked reduction in coal stiffness. The cumulative acoustic emission energy decreased to 0.77 × 106 mV·ms, demonstrating that ultrasonic cavitation promoted the initiation, propagation, and coalescence of internal microcracks, thereby accelerating damage evolution from microscale to macroscale. A progressive failure mechanism, characterised by primary cavitation-induced damage followed by secondary loading-induced damage, is ultimately formed. In addition, ultrasonic cavitation significantly enhanced coal permeability, with a maximum increase of 504.22%. These findings provide a theoretical basis for the further development of WUC-ECBM and for the efficient extraction of CBM.

  • Open Access

    Molecular Dynamics Simulation of Methane Adsorption and Diffusion in Limestone Pores in the Taiyuan Formation of the Ordos Basin, China: Effects of Pore Shapes, Apertures, and Formation Water

    by Tielian Shi, Cunbao Deng, Xiaoyang Guo, Lemei Zhang, Yu Zhang, Yue Bai, Dengke Liang, Yuanjing Li

    The Taiyuan Formation limestone in the Ordos Basin of China holds significant gas-bearing potential, making it a key target for unconventional natural gas exploration. Clarifying the microscopic occurrence mechanism of gas in limestone is necessary. The effects of pore morphology, aperture, and formation water were systematically studied in this paper through MD and GCMC. The results indicate that specific surface area, pore volume, tortuosity, and interaction synergistically influence methane adsorption and diffusion. Pore shape is intricately linked to these factors, and variations in pore width impact pore volume and interaction, with a slit pore being most conducive to gas diffusion. Formation water mainly forms water films and clusters in organic–inorganic pores. Water molecules preferentially form a water film, while increasing moisture content, expanding aperture, and introducing ions promote cluster formation. Formation water can enhance surface diffusion, reduce the adsorbed phase proportion, and decrease interaction, but it also occupies flow space and forms clusters that hinder gas diffusion. At low moisture content, gas diffusion is promoted in 2 nm and 4 nm pores, while high moisture content inhibits it. In contrast, 6 nm pores consistently curb diffusion.

  • Open Access

    Mechanical Damage to Coal and Increased Coal Permeability Caused by Water-Based Ultrasonic Cavitation

    by Xiaoyang Guo, Yijia Liu, Yanfeng Li, Cunbao Deng, Lemei Zhang, Yu Zhang

    Coalbed methane (CBM), recognized as a sustainable and environmentally friendly energy source, plays a crucial role in mitigating global climate change and advancing low-carbon energy solutions. However, the prevalence of low-permeability coal seams poses a significant challenge to effective CBM extraction. Improving coal permeability has emerged as a viable strategy to address the issue of low-permeability coal. Conventional CBM stimulation methods fall short in overcoming this obstacle. In contrast, the enhanced technique of CBM extraction by water-based ultrasonic cavitation holds great promise due to its use of high energy intensity, safety, and efficiency. Nevertheless, the inadequate theoretical framework for managing this technology impedes its widespread adoption for large-scale applications. This study investigated the impact of water-based ultrasonic cavitation treatment on coal’s properties and permeability through mechanical testing and permeability measurements conducted before and after treatment. This study also explored the process by which this technology, known as WUC-ECBM, improves coal’s mechanical properties and permeability. The findings suggest a potential stimulation technique (WUC-ECBM) for use in CBM extraction, and its physical mechanism.


  • Open Access

    Study on the Effect of External Air Supply and Temperature Control on Coal Spontaneous Combustion Characteristics

    by Changkui Lei, Xueqiang Shi, Lijuan Jiang, Cunbao Deng, Jun Nian, Yabin Gao

    Coal spontaneous combustion in underground mine goaf has a great impact on coal mining. The temperature-programmed experiment is a commonly used and effective method for studying the characteristics of coal spontaneous combustion. Aiming at the problem that the numerical simulation of coal spontaneous combustion characteristics under the condition of external air supply and temperature control in a temperature-programmed experiment is insufficient, a multi-physical field coupling numerical model of coal spontaneous combustion in the temperature-programmed experiment is established. The variation characteristics of coal temperature, oxygen, and oxidation products under external air supply and temperature control were studied. The results show that the numerical simulation results are consistent with the experimental results. With the increase in temperature, the volume fractions of oxygen and carbon dioxide decrease and increase, respectively. As the air supply volume increases, the oxygen volume fraction at the outlet increases, and the peak value of the oxygen volume fraction change rate exhibits a “hysteresis” feature, and the time corresponding to the peak value increases. Moreover, the temperature change rate increases. With the increase in the heating rate, the peak value of the oxygen volume fraction change rate increases and shows an “early appearance” characteristic, at the same time, the maximum coal temperature displays a linear increase trend.


  • Open Access

    Experimental Study on the Mechanical Properties of Tectonic Coal Using Reconstituted Coal Specimens

    by Yubo Wang, Suifang Wang, Lemei Zhang, Cunbao Deng

    Tectonic coal, an aggregate of coal particles formed by compacting pulverized coal, has been developed extensively in China. Currently, reconstituted coal specimens are widely adopted to investigate the mechanical properties of tectonic coal, but they have a low compaction degree compared to the tectonic coal in the field. Therefore, the current understanding of the mechanical properties of tectonic coal is not accurate. Herein, a new high–pressure–resistant mold was developed, and a heavy press was developed to prepare highly compacted reconstituted coal specimens. Based on the reconstituted coal specimens and the intact coal specimens obtained through coring, the mechanical properties of tectonic coal and intact coal were measured and compared systematically. The results show that the compaction degree of reconstituted coal specimen can be improved significantly by increasing the external force. For Sijiazhuang coal, the compaction degree of the reconstituted coal specimen almost reaches that of the tectonic coal in the field when the external force is increased to 550 KN. Moreover, the tectonic coal exhibits a low elastic modulus and low strength but high stress sensitivity. The elastic modulus and cohesion of tectonic coal are 22.08% and 43.47% of the corresponding values for intact coal. However, with the increase in the confining pressure from 5 to 20 MPa, the elastic modulus of tectonic coal increases by 1.14 times, while that of the intact coal increases just by 8.70%. In addition, tectonic coal and intact coal present different post-peak failure modes under the triaxial compression stress path. Typical shear failure occurs in the intact coal, while multiple shear failure occurs in the tectonic coal.


  • Open Access

    Research on the Dust Diffusion and Pollution Behaviour of Dynamic Tunneling in Header Excavators Based on Dynamic Mesh Technology and Field Measurement

    by Xi Chen, Hao Zhang, Shaocheng Ge, Cunbao Deng, Chaonan Fan, Guoliang Ma, Weichao Li

    In order to accurately characterize and evaluate dust particle diffusion in the dynamic tunneling process of a boring machine, this study considers the 31,116 main transport chute heaving face of the Lijiahao coal mine as a case study. A dynamic tunneling model is developed considering the real dynamic tunneling state of the header, to carry out an in-depth analysis of the spatial and temporal evolution of wind flow and dust dispersion in the tunnel under dynamic excavation. In addition, the results were compared against the calculations of a static standard excavation model of a conventional header. Employing CFD analysis accompanied by field measurements, it was highlighted that the dynamic tunneling of the header leads to an increase in the pressure difference and the turbulent kinetic energy at the working face. Moreover, an increase in the number of vortices was reported, and a higher concentration of dust spreads more quickly along the return wind side wall to the return flow area. On the other hand, the high concentration of dust under the standard tunneling model was found to accumulate a lot on the return wind side. Simultaneously, as the distance between the pressurized air outlet and the working face increases, the average wind speed in the vortex-type wind flow area at the front of the tunnel decreases. When t = 60 s, the return flow area expands to a space of 8 m~24 m from the head, and the dust accumulated above the header spreads to the back of the header to form a high concentration dust region of more than 500 mg/m³. It was shown that the range of high-concentration dust clouds in the breathing zone decreases compared to the results of the standard tunneling model. Moreover, the dust concentration in the breathing zone of the driver is significantly lower than that reported by the standard tunneling model. Based on the results of the field test, the average error between the simulated and measured data of the dynamic tunneling model was calculated to be around 6.46%, thus demonstrating the model’s capability in describing the real working conditions of the heave tunnel.


  • Open Access

    Molecular Simulation of the Effects of Cyclic Organic Compounds on the Stability of Lccbm Hydrates

    by Wenbo Lv, Cunbao Deng, Zhixin Jin, Hao Zhang, Yansheng Wang

    CH4 can be separated from low-concentration coal bed methane (LCCBM) by using the hydrate-based gas separation (HBGS) method. To study the contribution of different cyclic organic compounds to the separation of CH4 in LCCBM, an LCCBM hydrate model was constructed. Based on the Monte Carlo and molecular dynamics theory, we simulated the effect of three cyclic organic compounds—cyclopentane (CP), cyclopentanone (CP-one), and cyclopentanol (CP-ol)—on the stability of the LCCBM hydrate at P = 2 MPa, various temperatures, and discussed the structural stability of the hydrate in depth in terms of final snapshots, radial distribution function, mean square displacement, diffusion coefficient, and potential energy change. The results showed that for the CH4-N2 LCCMM gas mixture, CP showed the best facilitation effect compared to the other two cyclic compounds by maintaining the stability of the LCCBM hydrate well at T = 293 K. The promotion effect of CP-one is between CP and CP-ol, and when the temperature increases to T = 293 K, the oxygen atoms in the water molecule can maintain the essential stability of the hydrate structure, although the orderliness decreases significantly. Moreover, the structure of the hydrate model containing CP-ol is destroyed at T = 293 K, and the eventual escape of CH4 and N2 molecules in solution occurs as bubbles. The research results are important for further exploration of the mechanism of action of cyclic promoter molecules with LCCBM hydrate molecules and promoter preferences.


  • Open Access

    Pressure Relief Mechanism and Gas Extraction Method during the Mining of the Steep and Extra-Thick Coal Seam: A Case Study in the Yaojie No. 3 Coal Mine

    by Hao Zhang, Lehua Xu, Mengmeng Yang, Cunbao Deng, Yuanping Cheng

    Gas disasters, such as coal and gas outburst and gas overflow, always occur during the mining of the steep and extra-thick coal seam in the horizontal, fully mechanized, top coal slice caving (HFMTCSC) method. To solve these issues and guarantee the safe and efficient mining in the Yaojie No. 3 coal mine, 3DEC software was used in this work to investigate the overburden movement and collapse law as well as the stress redistribution and coal-seam deformation characteristics below the goaf. The results show that a pressure arch structure and a hinge structure are formed in succession in the overburden rock, which induces stress redistribution in the coal below the goaf. During the mining of the upper slice, more than 75% of the coal in the lower slice is located at the effective pressure relief zone; therefore, the steep and extra-thick coal seam can then be protected slice by slice. Meanwhile, with the increase of mining depth, the efficient pressure relief range expands. Based on this pressure relief mechanism, crossing boreholes and bedding boreholes were reasonably designed to efficiently extract the pressure relief gas during the mining of the steep and extra-thick coal seam in the Yaojie No. 3 coal mine.


  • Open Access

    Molecular Simulation on Competitive Adsorption Differences of Gas with Different Pore Sizes in Coal

    by Qing Han, Cunbao Deng, Tao Gao, Zhixin Jin

    Micropores are the primary sites for methane occurrence in coal. Studying the regularity of methane occurrence in micropores is significant for targeted displacement and other yield-increasing measures in the future. This study used simplified graphene sheets as pore walls to construct coal-structural models with pore sizes of 1 nm, 2 nm, and 4 nm. Based on the Grand Canonical Monte Carlo (GCMC) and molecular dynamics theory, we simulated the adsorption characteristics of methane in pores of different sizes. The results showed that the adsorption capacity was positively correlated with the pore size for pure gas adsorption. The adsorption capacity increased with pressure and pore size for competitive adsorption of binary mixtures in pores. As the average isosteric heat decreased, the interaction between the gas and the pore wall weakened, and the desorption amount of CH4 decreased. In ultramicropores, the high concentration of CO2 (50–70%) is more conducive to CH4 desorption; however, when the CO2 concentration is greater than 70%, the corresponding CH4 adsorption amount is meager, and the selected adsorption coefficient SCO2/CH4 is small. Therefore, to achieve effective desorption of methane in coal micropores, relatively low pressure (4–6 MPa) and a relatively low CO2 concentration (50–70%) should be selected in the process of increasing methane production by CO2 injection in later stages. These research results provide theoretical support for gas injection to promote CH4 desorption in coal pores and to increase yield.