XGXiaoyang Guo

Xiaoyang Guo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaoyang Guo has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Water-Based Ultrasonic Cavitation-Enhanced Coalbed Methane Recovery: Multiphysics Simulation, Sensitivity Analysis, and Long-Term Performance

    by Hui Duan, Xiaoyang Guo, Cunbao Deng, Tielian Shi, Jiehao Ren, Rui Shang, Zheng Zhang, Hongyu Mao, Jinhua Zhang, Manzheng Li

  • Open Access

    Effects of Ultrasonic Cavitation on Damage Evolution in Coal and Coalbed Methane Production Enhancement

    by Wenhao Deng, Zhixin Jin, Cunbao Deng, Xiaoyang Guo, Lemei Zhang, Yongpeng Fan, Rui Shang, Yuxin He, Hongyu Mao, Zheng Zhang, et al.

    This study addresses the significant increase in gas content and gas pressure caused by the rising proportion of high gas, low-permeability coal seams under high geostress conditions. This problem not only limits the efficient extraction of coalbed methane (CBM) but also poses a serious threat to mining safety. To overcome this challenge, a novel water-based ultrasonic cavitation-enhanced coalbed methane recovery (WUC-ECBM) is proposed. A self-developed multimodal ultrasonic cavitation reaction system is used to treat coal samples at different cavitation power levels (0–1100 W). Mechanical tests are then performed, and the damage evolution process is synchronously characterised using a multichannel acoustic emission monitoring system. Permeability tests are also conducted to evaluate the effect of ultrasonic cavitation on coal seepage performance. The results show that ultrasonic cavitation systematically alters the mechanical behaviour of coal, driving the evolution from microstructural modification to macroscopic mechanical response. The compressive strength decreased by up to 53.71%, and the elastic modulus fell to 1.34 GPa, indicating a marked reduction in coal stiffness. The cumulative acoustic emission energy decreased to 0.77 × 106 mV·ms, demonstrating that ultrasonic cavitation promoted the initiation, propagation, and coalescence of internal microcracks, thereby accelerating damage evolution from microscale to macroscale. A progressive failure mechanism, characterised by primary cavitation-induced damage followed by secondary loading-induced damage, is ultimately formed. In addition, ultrasonic cavitation significantly enhanced coal permeability, with a maximum increase of 504.22%. These findings provide a theoretical basis for the further development of WUC-ECBM and for the efficient extraction of CBM.

  • Open Access

    Molecular Dynamics Simulation of Methane Adsorption and Diffusion in Limestone Pores in the Taiyuan Formation of the Ordos Basin, China: Effects of Pore Shapes, Apertures, and Formation Water

    by Tielian Shi, Cunbao Deng, Xiaoyang Guo, Lemei Zhang, Yu Zhang, Yue Bai, Dengke Liang, Yuanjing Li

    The Taiyuan Formation limestone in the Ordos Basin of China holds significant gas-bearing potential, making it a key target for unconventional natural gas exploration. Clarifying the microscopic occurrence mechanism of gas in limestone is necessary. The effects of pore morphology, aperture, and formation water were systematically studied in this paper through MD and GCMC. The results indicate that specific surface area, pore volume, tortuosity, and interaction synergistically influence methane adsorption and diffusion. Pore shape is intricately linked to these factors, and variations in pore width impact pore volume and interaction, with a slit pore being most conducive to gas diffusion. Formation water mainly forms water films and clusters in organic–inorganic pores. Water molecules preferentially form a water film, while increasing moisture content, expanding aperture, and introducing ions promote cluster formation. Formation water can enhance surface diffusion, reduce the adsorbed phase proportion, and decrease interaction, but it also occupies flow space and forms clusters that hinder gas diffusion. At low moisture content, gas diffusion is promoted in 2 nm and 4 nm pores, while high moisture content inhibits it. In contrast, 6 nm pores consistently curb diffusion.

  • Time response of injection pressure sensitivity and increasement potential controlled by pore topology in CO2-ECBM

    by Yijia Liu, Xiaoyang Guo, Cunbao Deng, Liuni Song, Dengke Liang, Yue Bai, Xingyun Yang, Rui Shang, Hongyu Mao


  • Improvement Mechanism of Coal Pore Microstructure by Mineral Variations in the Ultrasonic Cavitation Environment

    by Yujuan Wang, Cunbao Deng, Xiaoyang Guo, Liuni Song, Tielian Shi, Lemei Zhang, Yu Zhang

    Ultrasonic technology is regarded as a potential new method for coalbed methane recovery due to its excellent directionality, powerful penetrating power, easy acquisition, and focused sound energy. However, research on ultrasonic excitation fracturing has primarily focused on thermal and vibration effects, with little scientific understanding of ultrasonic cavitation damage to coal pore microstructure based on mineral variations. In this study, a water‐based ultrasonic cavitation device is used to fracture and increase coal permeability. The spatial morphological alterations of pores and mineral structures in coal before and after ultrasonic treatment are investigated using computed tomography scanning, and the changes of parameters, including fractal dimensions, equivalent hole radii, equivalent throat radii, equivalent throat lengths, and coordination numbers prior to and subsequent to ultrasonic treatment, are quantitatively analyzed. The results show that ultrasonic cavitation can improve the coal pore microstructure by facilitating mineral migration, dispersion, and fragmentation. Such an effect can be reflected in the increased number of pores and improved pore connectivity. Ultrasonic cavitation increased the number of pores in coal samples by 1.7 times (4–20 μm), the number of throats by 1.5 times (2–8 μm), and the frequency of coordination numbers surpassing 18 rose from 1 to 12.


  • Impact of ultrasonic power on evolution mechanism of cavitation effect in water-bearing coal pores microstructure

    by Lemei Zhang, Xiaoyang Guo, Cunbao Deng, Yujuan Wang, Liuni Song, Yanfeng Li, Jiahua Xu


  • Open Access

    Mechanical Damage to Coal and Increased Coal Permeability Caused by Water-Based Ultrasonic Cavitation

    by Xiaoyang Guo, Yijia Liu, Yanfeng Li, Cunbao Deng, Lemei Zhang, Yu Zhang

    Coalbed methane (CBM), recognized as a sustainable and environmentally friendly energy source, plays a crucial role in mitigating global climate change and advancing low-carbon energy solutions. However, the prevalence of low-permeability coal seams poses a significant challenge to effective CBM extraction. Improving coal permeability has emerged as a viable strategy to address the issue of low-permeability coal. Conventional CBM stimulation methods fall short in overcoming this obstacle. In contrast, the enhanced technique of CBM extraction by water-based ultrasonic cavitation holds great promise due to its use of high energy intensity, safety, and efficiency. Nevertheless, the inadequate theoretical framework for managing this technology impedes its widespread adoption for large-scale applications. This study investigated the impact of water-based ultrasonic cavitation treatment on coal’s properties and permeability through mechanical testing and permeability measurements conducted before and after treatment. This study also explored the process by which this technology, known as WUC-ECBM, improves coal’s mechanical properties and permeability. The findings suggest a potential stimulation technique (WUC-ECBM) for use in CBM extraction, and its physical mechanism.


  • Spatial evolution mechanism of coal structure damage and gas permeability under water-based ultrasonic treatment

    by Linjie Cao, Xiaoyang Guo, Liuni Song, Cunbao Deng, Yu Zhang, Yongliang Mu, Fengyu Liu, Jiahua Xu


  • Open Access

    Spatial evolution mechanism of coal structure damage and gas permeability under water-based ultrasonic treatment

    by 林杰 曹, Xiaoyang Guo, Liuni Song, Cunbao Deng, Yu Zhang, Yongliang Mu, Fengyu Liu, Jiahua Xu

    This study investigates the spatial damage effect of water-based ultrasonic on the structure and permeability of high-grade coal. Herein, anthracite from No.10 coal seam of Bangou Coal Mine in Shanxi Province as the research object, and the following were drawn from the experimental research and the gas seepage simulation: (1) the matrix and minerals attached to the coal surface are shattered by bubbles, and some irregular pores and impact pits appear on the surface of the coal. (2) The internal pore structure of coal can be significantly improved in a relatively short period of time, while the fracture structure requires a longer action time. (3) Some large pores and fractures will achieve breakthroughs from nothing to something, with previously isolated and larger aperture seepage pores and fractures interconnected, forming larger connected pore clusters and fractures over the longer action time. (4) With the prolongation of the action time, the coal permeability shows an order of magnitude increase. The growth rate is fast in the pore-creating stage and the formation stage of connected pore clusters, but it is relatively slower in the pore expansion stage.

  • Controlled mechanism of dynamic behavior of water-based ultrasonic cavitation in coal pore microstructure

    by Lemei Zhang, Xiaoyang Guo, Yijia Liu, Cunbao Deng, Liuni Song, Quanjiang Zhou, Junjie Shi, Yonglu Zhou