DMDevi Shanker Misra

Devi Shanker Misra

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Devi Shanker Misra has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nitrogen centers in single crystal diamond grown by chemical vapor deposition

    by D. S. Misra

    The single crystals of diamond grown by chemical vapor deposition (CVD) are getting wider acceptance in the market for gem purposes and various other applications. Most popular applications are gems, particle detectors, high pressure anvils, and laser windows. It is widely accepted that, unless specifically made, the CVD diamond single crystals are type IIa, which implies that they have a nitrogen concentration of less than 5 ppm in the diamond. The concentration of nitrogen in CVD grown single crystal diamond is a serious deterrent for certain applications such as particle detectors, high pressure anvils, and laser windows. The threshold of nitrogen for these specific applications is subparts per billion (less than 1 ppb). On the other hand, the CVD single crystal diamonds for gems could hold nitrogen in subparts per million (less than 1 ppm) range and would still qualify as excellent gems. In this paper, an attempt is made to understand the nature of nitrogen in two types of CVD single crystal diamonds: one that shows very week fluorescence in the PL spectrum (light color or white color) with low nitrogen concentration and the other with high nitrogen concentration that shows strong fluorescence in the PL spectrum (brown to dark brown color). The correlation of nitrogen in different forms of vacancy centers in these two types of single crystals of CVD diamonds is studied. The results indicate that a strong relationship exists in concentrations of the (NVH)0 and NS+ centers in brown and dark brown color CVD grown single crystal diamonds.


  • Open Access

    Studies of Dislocations in Type Ib, Type IIa HPHT and CVD Single Crystal Diamonds

    by Devi Shanker Misra

    In this review, the X-ray topography results of various types of single crystal diamonds (SCDs) are reported. Dislocations and dislocation bundles are present in all types of SCDs, the only exception being type IIa high-pressure, high-temperature (HPHT) SCDs. The technology of growing HPHT type IIa SCDs has advanced to a level where the samples show almost no dislocations or dislocation bundles. However, very few groups appear to have perfected the process of HPHT growth of type IIa SCDs. There appears to be a characteristic difference in the dislocations present in type Ib HPHT and chemical vapor deposited (CVD) SCDs. The dislocations in CVD SCDs are mostly in aggregate form, while in HPHT type Ib diamonds there are line dislocations which propagate in or directions. The CVD SCDs growth appears to be in the early stage in terms of the control of dislocations and dislocation bundles, compared to other semiconductor wafers. The dislocations and dislocation bundles and aggregates in SCDs limit their applications in electronic and optical devices. For instance, high-power laser windows must have low dislocations and dislocation bundles. For electronic devices such as high-power diodes, dislocations reduce the breakdown voltage of SCDs, limiting their applications. The knowledge of dislocations, their identification and their origin are, therefore, of utmost importance for the applications of SCDs, be they HPHT or CVD grown.


  • Open Access

    Vertically Aligned Few-Layered Graphene-Based Non-Cryogenic Bolometer

    by Anil K. Yadav, Saba Mehsar Khan, Anirban Kundu, Renu Rani, Navneet Soin, James McLaughlin, Devi Shanker Misra, Kiran Shankar Hazra

    In this study, we report the photoresponse of vertically aligned few-layered graphene (VAG) upon infra-red (IR) irradiation at room temperature. Four probe measurements showed the current–voltage (I–V) characteristic of electrical switching during pulsed IR irradiation. The photoresponse reported here for VAG was significantly higher than that reported for carbon nanotube (CNT) samples. Our investigation shows that such a photoresponse arose solely from the bolometric effect, where the conductivity changed with temperature. The resistance magnitude of the VAGs increased ~two fold for each 6 °C increase in temperature. Also, the Thermal Coefficient of Resistance (TCR) in this region was ~11%/K, which is the highest TCR value reported for any carbon nanomaterial.


  • Plasma modified flexible bucky paper as an efficient counter electrode in dye sensitized solar cells

    by Soumyendu Roy, Reeti Bajpai, Ajay Kumar Jena, Pragyensh Kumar, Neha Kulshrestha, D. S. Misra

    Platinum (Pt) -free counter electrodes (CEs) for dye sensitized solar cells (DSSCs) were developed using freestanding flexible single wall carbon nanotube (SWNT) films called bucky papers (BPs). BP was irradiated with microwave plasma, created using a mixture of Ar (1%) and H2 (99%) gases, for 2 h. Raman scattering measurements revealed that no significant defects were created in the SWNTs as a result of the treatment. Plasma-treated BP (P-BP) developed vertically oriented, micron sized, pillar-like structures on its surface, while its base was still a dense random mesh of SWNTs. This unique flexible film had a larger accessible surface area and better catalytic properties. The plasma treatment improved the efficiency of BP-based DSSCs from 2.44% to 4.02%, which is comparable to Pt thin film (4.08%). The P-BP based solar cell operated with an open circuit voltage of 0.73 V and a fill factor of 0.70. It also had much higher efficiencies than films of randomly oriented plasma treated SWNTs. Using electrochemical impedance spectroscopy, the charge transfer resistances of P-BP and Pt were found to be 1.46 and 1.73 Ω cm2, respectively.


  • Graphene supported nickel nanoparticle as a viable replacement for platinum in dye sensitized solar cells

    by Reeti Bajpai, Soumyendu Roy, Neha Kulshrestha, Javad Rafiee, Nikhil Koratkar, D. S. Misra

    A platinum free counter electrode for dye sensitized solar cells was developed using graphene platelets (GP) supported nickel nanoparticles (NPs) as the active catalyst. Few layered GP were prepared by chemical oxidation of graphite powders followed by thermal exfoliation and reduction. The nanoparticles of nickel were deposited directly onto the platelets by pulsed laser ablation. The composite electrodes of GP and Ni nanoparticles (GP–Ni) thus obtained showed better performance compared to conventional Pt thin film electrodes (Std Pt) and unsupported Ni NPs. The efficiencies of the cells fabricated using GP–Ni, Std Pt and Ni NP CEs were 2.19%, 2% and 1.62%, respectively. The GP–Ni composite solar cell operated with an open circuit voltage of 0.7 V and a fill factor of 0.6. Electrochemical impedance spectroscopy using the I3 −/I−redox couple confirms lower values of charge transfer resistance for the composite electrodes, 4.67 Ω cm2 as opposed to 7.73 Ω cm2 of Std Pt. The better catalytic capability of these composite materials is also reflected in the stronger I3 −reduction peaks in cyclic voltammetry scans.


  • Graphene Supported Platinum Nanoparticle Counter-Electrode for Enhanced Performance of Dye-Sensitized Solar Cells

    by Reeti Bajpai, Soumyendu Roy, Pragyensh Kumar, Preeti Bajpai, Neha Kulshrestha, Javad Rafiee, Nikhil Koratkar, D. S. Misra

    Composites of few layered graphene (G) and platinum (Pt) nanoparticles (NP) with different loadings of Pt were used as counter electrode (CE) in dye-sensitized solar cell (DSSC). NPs were deposited directly on to G using pulsed laser ablation method (PLD). DSSCs formed using the composite CEs show improved performance compared to conventional Pt thin film electrode (Std Pt) and unsupported Pt NPs. Composite with 27% loading of Pt shows 45% higher efficiency (η = 2.9%), greater short circuit current (Jsc = 6.67 mA cm–2), and open circuit voltage (Voc = 0.74 V) without any loss of the fill factor (FF = 58%) as compared to the cells fabricated using Std Pt electrodes. Values of η, Jsc and Voc for DSSC using Std Pt CE were 2%, 5.05 mA cm–2 and 0.68 V, respectively. Electrochemical impedance spectroscopy using I–3/I– redox couple confirm lower values of charge transfer resistance for the composite electrodes, e.g., 2.36 Ω cm2 as opposed to 7.73 Ω cm2 of Std Pt. The better catalytic activity of these composite materials is also reflected in the stronger I–3 reduction peaks in cyclic voltammetry scans.


  • Enhanced Field Emission and Improved Supercapacitor Obtained from Plasma‐Modified Bucky Paper

    by Soumyendu Roy, Reeti Bajpai, Navneet Soin, Preeti Bajpai, Kiran S. Hazra, Neha Kulshrestha, Susanta Sinha Roy, James A. McLaughlin, D. S. Misra

    The surface morphology of bucky papers (BPs) made from single‐walled carbon nanotubes (CNTs) is modified by plasma treatment resulting in the formation of vertical microstructures on the surface. The shapes of these structures are either pillarlike or conelike depending on whether the gas used during plasma treatment is Ar or CH4. A complex interplay between different factors, such as the electric field within the plasma sheath, polarization of the CNT, intertubular cohesive forces, and ion bombardment, result in the formation of these structures. The roles played by these factors are quantitatively and qualitatively analyzed. The final material is flexible, substrate‐free, composite‐free, made only of CNTs, and has discrete vertically aligned structures on its surface. It shows enhanced field emission and electrochemical charge‐storage capabilities. The field enhancement factor is increased by 6.8 times, and the turn‐on field drops by 3.5 times from an initial value of 0.35 to 0.1 V μm−1 as a result of the treatment. The increase in Brunauer–Emmett–Teller surface area results in about a fourfold improvement in the specific capacitance of the BP electrodes. Capacitance values before and after the treatments are 75 and 290 F g−1, respectively. It is predicted that this controlled surface modification technique could be put to good use in several applications based on macroscopic CNT films.


  • Correlation between the saturation of emission current and defect co-ordination number for irradiated aligned multiwalled carbon nanotubes

    by Brahmananda Chakraborty, Padmnabh Rai, Kiran Shankar Hazra, Dipti R. Mohapatra, D.S. Misra, S. Banerjee

  • Step growth in single crystal diamond grown by microwave plasma chemical vapor deposition

    by Pawan K. Tyagi, Abha Misra, K.N. Narayanan Unni, Padmnabh Rai, Manoj K. Singh, Umesh Palnitkar, D.S. Misra, F. Le Normand, Mainak Roy, S.K. Kulshreshtha


  • Melting and defect generation in chemical vapor deposited diamond due to irradiation with 100 MeV Au + and Ag + ions

    by D.S. Misra, Umesh Palnitkar, Pawan K. Tyagi, M.K. Singh, E. Titus, D.K. Avasthi, P. Vasa, P. Ayyub