SHSusanne Heyder

Susanne Heyder

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Susanne Heyder has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Corrosion of 1.4016 Ferritic Steel by Urea at High Temperature

    by Anastasiia Galakhova, Fabian Kadisch, Gregor Mori, Susanne Heyder, Helmut Wieser, Bernhard Sartory, Jaroslaw Wosik, Sabine Schwarz, Simon Burger

    The corrosion behavior of a ferritic unstabilized stainless steel 1.4016 during decomposition of aqueous urea solution at high temperature has been investigated. Corrosion was obtained from 100 h of cyclic heating (from room temperature up to 600 °C) and injection of aqueous urea solution on the steel plate in a laboratory-scale test bench. The evaluation procedure covered the metallographic analysis of corroded steel samples by high-resolution scanning electron microscopy (HR-SEM) and transmission electron microscopy (TEM). Uniform corrosion underneath deposits was found as one of the drivers for degradation of the steel. Damage happened by high-temperature depassivation of stainless steel due to the excess of the aggressive medium. Besides uniform corrosion, a nitridation layer underneath surface oxides together with chromium carbonitride particles precipitated through the whole depth of the sample was identified resulting in intergranular attack.

  • Open Access

    Corrosion of Stainless Steel by Urea at High Temperature

    by Anastasiia Galakhova, Fabian Kadisch, Gregor Mori, Susanne Heyder, Helmut Wieser, Bernhard Sartory, Simon Burger

    The corrosion mechanism of stainless steel caused by high temperature decomposition of aqueous urea solution has been investigated. The relationship between aqueous urea solution, its thermal decomposition products and the corrosion mechanism of stainless steel is studied by FTIR spectroscopy, SEM and stereo microscopy. The corroded steel samples, together with deposits, were obtained from the injection of aqueous urea solution on the steel plate at high temperatures. Uniform corrosion underneath the deposits was proposed as the main driver for corrosion of the steel samples. At the crevices, corrosion due to the used geometry and due to high temperature cycling could play an acceleration role as well.