Corrosion of 1.4016 Ferritic Steel by Urea at High Temperature
Open Access
- 9 March 2023
- journal article
- research article
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 32 (20) , 9153-9162
Abstract
The corrosion behavior of a ferritic unstabilized stainless steel 1.4016 during decomposition of aqueous urea solution at high temperature has been investigated. Corrosion was obtained from 100 h of cyclic heating (from room temperature up to 600 °C) and injection of aqueous urea solution on the steel plate in a laboratory-scale test bench. The evaluation procedure covered the metallographic analysis of corroded steel samples by high-resolution scanning electron microscopy (HR-SEM) and transmission electron microscopy (TEM). Uniform corrosion underneath deposits was found as one of the drivers for degradation of the steel. Damage happened by high-temperature depassivation of stainless steel due to the excess of the aggressive medium. Besides uniform corrosion, a nitridation layer underneath surface oxides together with chromium carbonitride particles precipitated through the whole depth of the sample was identified resulting in intergranular attack.Keywords
Funding Information
- Montanuniversität Leoben
This publication has 17 references indexed in Scilit:
- Corrosion Behavior of Candidate Materials Used for Urea Hydrolysis Equipment in Coal-Fired Selective Catalytic Reduction UnitsJournal of Materials Engineering and Performance, 2018
- Oxidation behavior of ferritic stainless steels in simulated automotive exhaust gas containing 5 vol.% water vaporMaterials Chemistry and Physics, 2018
- Failure Analysis of an 18% Cr Ferritic Stainless Steel in a Simulated Exhaust Condensate Containing UreaJournal of Failure Analysis and Prevention, 2018
- Corrosion at the urea injection in SCR‐system during component testMaterials and Corrosion, 2011
- Suitable Stainless Steel Selection for Exhaust Line Containing a Selective Catalytic Reduction (SCR) SystemSAE International Journal of Advances and Current Practices in Mobility, 2011
- Corrosion of stainless steels in simulated diesel exhaust environment with ureaMaterials and Corrosion, 2011
- Comparison of influences of NaCl and CaCl2 on the corrosion of 11% and 17% Cr ferritic stainless steels during cyclic corrosion testCorrosion Science, 2010
- Material Corrosion Investigations for Urea SCR Diesel Exhaust SystemsSAE International Journal of Advances and Current Practices in Mobility, 2009
- Synthesis of transition metal carbide nanoparticles through melamine and metal oxidesJournal of the European Ceramic Society, 2008
- Facile route to metal nitrides through melamine and metal oxidesJournal of Materials Chemistry, 2006