Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Pradeep Kumar has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Defect Passivation and Enhanced Hole Extraction in Inverted Perovskite Solar Cells via CeO2@MoS2 Interfacial Engineering

    by Pradeep Kumar, Chia-Feng Li, Hou-Chin Cha, Yun-Ming Sung, Yu-Ching Huang, Kuen-Lin Chen

    Nanomaterial-based hole transport layers (HTLs) play a vital role in regulating interfacial charge extraction and recombination in perovskite solar cells (PSCs). To improve PSC efficiency, hydrothermally synthesized CeO2@MoS2 nanocomposites (CM NCs) were incorporated as an interfacial buffer layer into a NiOX/MeO-2PACz HTL. The introduction of CM NCs induces strong interfacial interactions, where Mo sites in MoS2 interact with NiOX, modulating the Ni2+/Ni3+ ratio and reducing the interfacial trap density. Moreover, CeO2 promotes the formation of oxygen vacancies, collectively improving the conductivity and hole transport capability of the NiOX HTL. The MoS2-grafted CeO2 interlayer effectively tailors the interfacial energetics and creates an effective channel for hole transfer, thereby reducing open-circuit voltage (VOC) loss and enhancing device performance. This interface modification efficiently enhances hole extraction, and non-radiative recombination is effectively suppressed at the NiOX/MeO-2PACz/perovskite interface. Thereby, incorporating 2 vol% CM NCs into PSCs achieved a power conversion efficiency (PCE) of 17.93%, compared to 17.50% for a 1 vol% CM NCs-based device and 17.01% for the unmodified control device. The enhanced performance at the optimized CM NCs concentration is attributed to effective defect passivation, reduced VOC loss, and improved interfacial band alignment, which together facilitate hole extraction and suppress non-radiative recombination. However, excessive CM NCs incorporation (4 vol%) leads to increased interfacial resistance, partial hole blocking effects associated with the n-type nature of CeO2, and aggravated recombination, resulting in degraded device performance. These results demonstrate that precise control over CM NCs interlayer thickness and concentration is critical for maximizing device performance, providing a robust strategy for designing high-efficiency and stable NiOX-based PSCs and advancing nanocomposite-enabled interfacial engineering for photovoltaic applications.

  • Synergistic effects of Au/Ag-modified Fe3O4@MoS2 nanocomposites in photocatalytic methylene blue degradation under green light

    by Pradeep Kumar, Zu-Yin Deng, Yu-Ching Huang, Jui-Yang Chang, Chin-Ya Chiou, Bal Chandra Yadav, Hephsiba Kochupappy Siju, Chiu-Hsien Wu, Kuen-Lin Chen


  • Open Access

    Enhancing Power Conversion Efficiency of Organic Solar Cells with Magnetoplasmonic Fe3O4@Au@m-ABS Nanoparticles

    by Pradeep Kumar, Shih-Han Huang, Chia-Yi Hsu, Ssu-Yung Chung, Hou-Chin Cha, Chih-Min Chuang, Kuen-Lin Chen, Yu-Ching Huang

    Organic–inorganic nanocomposites have the potential to be used in photovoltaic materials due to their eco-friendliness, suitable band gaps, and high stability. In this work, we integrated gold and Fe3O4 magnetic nanoparticles with poly-m-amino benzene sulfonic (m-ABS) to synthesize Fe3O4@Au@poly-(m-aminobenzenesulfonic acid) (Fe3O4@Au@m-ABS) magneto-plasmonic nanoparticles (MPNPs) to enhance the performance of the organic photovoltaic (OPV). These MPNPs exhibit broad UV-Vis absorption and a low band gap of 2.878 eV, enhancing their suitability for photovoltaic applications. The MPNPs were introduced into the ZnO electron transporting layer (ETL) and active layer to investigate the influence of MPNPs on the power conversion efficiency (PCE) of the OPVs. When 0.1 vol% MPNPs were incorporated in the ETL, the OPVs achieved a PCE of 14.24% and a fill factor (FF) of 69.10%. On the other hand, when 0.1 vol% MPNPs were incorporated in the active layer, the OPVs showed a PCE of 14.11% and an FF of 68.83%. However, the OPVs without MPNPs only possessed a PCE of 13.15% and an FF of 63.69%. The incorporation of MPNPs increased the PCE by 8.3% in the OPV device. These findings suggest that Fe3O4@Au@m-ABS MPNPs are promising nanocomposite materials for enhancing the performance of OPVs.


  • Improving Sensitivity and Reproducibility of Surface-Enhanced Raman Scattering Biochips Utilizing Magnetoplasmonic Nanoparticles and Statistical Methods

    by Chin-Wei Lin, Li-Yu Chen, Yu-Ching Huang, Pradeep Kumar, Yu-Zhi Guo, Chiu-Hsien Wu, Li-Min Wang, Kuen-Lin Chen

    Surface-enhanced Raman scattering (SERS) technology has been widely recognized for its remarkable sensitivity in biochip development. This study presents a novel sandwich immunoassay that synergizes SERS with magnetoplasmonic nanoparticles (MPNs) to improve sensitivity. By taking advantage of the unique magnetism of these nanoparticles, we further enhance the detection sensitivity of SERS biochips through the applied magnetic field. Despite the high sensitivity, practical applications of SERS biochips are often limited by the issues of stability and reproducibility. In this study, we introduced a straightforward statistical method known as "Gaussian binning", which involves initially binning the two-dimensional Raman mapping data and subsequently applying Gaussian fitting. This approach enables a more consistent and reliable interpretation of data by reducing the variability inherent in Raman signal measurements. Based on our method, the biochip, targeting for C-reactive protein (CRP), achieves an impressive detection limit of 5.96 fg/mL, and with the application of a 3700 G magnetic field, it further enhances the detection limit by 5.7 times, reaching 1.05 fg/mL. Furthermore, this highly sensitive and magnetically tunable SERS biochip is easily designed for versatile adaptability, enabling the detection of other proteins. We believe that this innovation holds promise in enhancing the clinical applicability of SERS biochips.


  • Highly sensitive CO gas sensor based on ternary metal sulfides PbSbS quantum dots: Experimental and DFT study

    by Pradeep Kumar, Hsin-Yuan Peng, Yu-Hsuan Yang, Utkarsh Kumar, Zu-Yin Deng, Kuen-Lin Chen, Ming-Way Lee, Chiu-Hsien Wu


  • Open Access

    Photocatalytic Activity of a Hydrothermally Synthesized Γ-Fe2o3@Au/Mos2 Heterostructure for Organic Dye Degradation Under Green Light

    by Pradeep Kumar, Utkarsh Kumar, Yu-Ching Huang, Po-Yo Tsai, Chia-Hao Liu, Chiu-Hsien Wu, Wen-Min Huang, Kuen-Lin Chen

    Hydrothermally synthesized γ-Fe2O3@Au/MoS2 heterostructure with excellent photocatalysis properties for the degradation of Methyl blue dye under green light at room temperature (300 K) has been reported in this article. The bandgap of the heterostructure was estimated from the Tauc plot and found as 0.91 eV (indirect) and 2.23 eV (direct). The Raman spectra revealed the optical and electrical activity of the heterostructure. The photocatalyst properties of γ-Fe2O3@Au/MoS2 heterostructures were investigated by degrading Methyl Blue (MB) dye under green light (8 watts) at various catalysis concentrations and pH values. At a pH of 12, more than 98 % efficiency was achieved within a few hours. The pseudo-first-order reaction rate constant (K_app) showed that there was no reaction between MB and catalyst. The energies, geometric structure, and vibrational numbers of MoS2 and γ-Fe2O3@Au were calculated using Density functional techniques (DFT/B3LYP) with the LANL2MB basis set. The basic vibrational wavenumbers, intensities, and the shifting of energy levels for each step in the photodegradation reaction were extracted using DFT. A good agreement was seen between the experimental and theoretical results.