Jui-Sheng Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jui-Sheng Wu has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Edward Yi Chang
Department of Materials Science and Engineering National Yang Ming Chiao Tung University Hsinchu 300 Taiwan
14 shared publications - Tsung-Ying Yang
International College of Semiconductor Technology, National Yang Ming Chiao Tung University, Hsinchu 300, Taiwan
6 shared publications You-Chen Weng
Industry Academia Innovation School, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
6 shared publications- Yan-Kui Liang
International College of Semiconductor Technology, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
5 shared publications Chih-Chieh Lee
Department of Materials Science and Engineering National Yang Ming Chiao Tung University Hsinchu 300 Taiwan
4 shared publicationsMei-Yan Kuo
Graduate Program for Nanotechnology, Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
3 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6417-6423
Investigation of Leakage Mechanisms in Nonetched-Barrier AlGaN/GaN Schottky Barrier Diodes
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6417-6423
Investigation of Leakage Mechanisms in Nonetched-Barrier AlGaN/GaN Schottky Barrier Diodes
- Open Access
- 1 October 2026
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 15 (10) , 104006
Investigating the Effects of Growth Conditions of the Ultra-Thin InAlGaN Back Barrier on the Performance of the Sub-50 nm Channel Thickness InAlGaN DHEMTs
High performance InAlGaN double-heterostructures HEMTs with 2.8 nm InAlGaN back barrier and sub-50 nm channel thickness is demonstrated in this paper. By altering V/III ratios during the growth of the back barrier, transport properties and device characteristics were significantly improved. Remarkable decreases of off-state leakage currents and current collapses (CC) were also observed, with achieved 2.9% gate-lag, 5.6% drain-lag, 28% CC, and suppressed self-heating effect. These results have shown the potential of this structure for high-power and high-frequency applications. Suppression of parasitic electron conduction and total trap density were found to be the main mechanisms for the improvements of the device performance.
- 1 October 2026
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 15 (10) , 104006
Open AccessInvestigating the Effects of Growth Conditions of the Ultra-Thin InAlGaN Back Barrier on the Performance of the Sub-50 nm Channel Thickness InAlGaN DHEMTs
High performance InAlGaN double-heterostructures HEMTs with 2.8 nm InAlGaN back barrier and sub-50 nm channel thickness is demonstrated in this paper. By altering V/III ratios during the growth of the back barrier, transport properties and device characteristics were significantly improved. Remarkable decreases of off-state leakage currents and current collapses (CC) were also observed, with achieved 2.9% gate-lag, 5.6% drain-lag, 28% CC, and suppressed self-heating effect. These results have shown the potential of this structure for high-power and high-frequency applications. Suppression of parasitic electron conduction and total trap density were found to be the main mechanisms for the improvements of the device performance.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (7) , 3970-3976
Passivation Engineering for Recess-Free Enhancement Mode Ultrathin-Barrier AlGaN/GaN MIS-HEMT
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (7) , 3970-3976
Passivation Engineering for Recess-Free Enhancement Mode Ultrathin-Barrier AlGaN/GaN MIS-HEMT
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (6) , 3366-3371
High-Performance Tri-Gate GaN MIS-HEMT With a Lanthanum-Doped Hybrid Ferroelectric Charge-Trap Gate-Stack
This study demonstrates a high-performance E-mode GaN MIS-HEMT with a tri-gate architecture and a ferroelectric-engineered (lanthanum) La-doped Hf0.5Zr0.5O2 (HZLO) gate-stack (FEG) incorporating a 1-nm ZrO2 seed layer (SL). The tri-gate design enables superior electrostatic control, while La-doping enhances ferroelectric (FE) polarization and gate breakdown, and ZrO2 (SL) improves crystallinity and reduces thermal budget. The fabricated devices achieve VTH values of $\text {4.85}~{\pm}~\text {0.2}$ V (W ${}_{\text {Fin}} =\text {80}$ nm) and ~3.7 V (100 nm), with the W ${}_{\text {Fin}}~\text {80}$ -nm device showing a low R ${}_{\text {ON-SP}}$ of 0.69 m $\Omega \cdot $ cm2, I ${}_{\text {DS-MAX}}$ of $\text {869}~{\pm}~\text {12}$ mA/mm (~40% higher than E-mode planar), and an off-state breakdown of 805 V. Long-term reliability is confirmed with stable VTH (3.34 V after ten years fit by power law), a gate breakdown voltage of 24.87 V, and robust time-dependent dielectric breakdown (TDDB) lifetime (13.78 V at 1% failure). These results highlight the promise of FEG tri-gate GaN high electron mobility transistors (HEMTs) for power-switching applications.
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (6) , 3366-3371
High-Performance Tri-Gate GaN MIS-HEMT With a Lanthanum-Doped Hybrid Ferroelectric Charge-Trap Gate-Stack
This study demonstrates a high-performance E-mode GaN MIS-HEMT with a tri-gate architecture and a ferroelectric-engineered (lanthanum) La-doped Hf0.5Zr0.5O2 (HZLO) gate-stack (FEG) incorporating a 1-nm ZrO2 seed layer (SL). The tri-gate design enables superior electrostatic control, while La-doping enhances ferroelectric (FE) polarization and gate breakdown, and ZrO2 (SL) improves crystallinity and reduces thermal budget. The fabricated devices achieve VTH values of $\text {4.85}~{\pm}~\text {0.2}$ V (W ${}_{\text {Fin}} =\text {80}$ nm) and ~3.7 V (100 nm), with the W ${}_{\text {Fin}}~\text {80}$ -nm device showing a low R ${}_{\text {ON-SP}}$ of 0.69 m $\Omega \cdot $ cm2, I ${}_{\text {DS-MAX}}$ of $\text {869}~{\pm}~\text {12}$ mA/mm (~40% higher than E-mode planar), and an off-state breakdown of 805 V. Long-term reliability is confirmed with stable VTH (3.34 V after ten years fit by power law), a gate breakdown voltage of 24.87 V, and robust time-dependent dielectric breakdown (TDDB) lifetime (13.78 V at 1% failure). These results highlight the promise of FEG tri-gate GaN high electron mobility transistors (HEMTs) for power-switching applications.
- Open Access
- 1 November 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (11) , 114004
Low-Damage Atomic Layer Etching for Contact Resistance Reduction in Millimeter Wave AlGaN/GaN HEMTs on Si
High-performance AlGaN/GaN MOSHEMTs on Si were demonstrated using atomic layer etching (ALE) for ohmic recess. The ALE technique enabled atomic-scale precision and effectively mitigated plasma-induced damage, leading to a smoother surface morphology ( R RMS ) and a notable reduction in contact resistance ( R c ) to 0.15 Ω·mm. The fabricated device exhibited enhanced maximum drain current ( I DS, MAX ), transconductance ( g m ), and a more positive threshold voltage ( V th ), along with suppressed gate and drain lag. Owing to the reduction in access resistance ( R S and R D ) and parasitic capacitance ( C GS and C GD ) extracted from small-signal modeling, the current-gain cut-off frequency ( f T ) and maximum oscillation frequency ( f MAX ) were enhanced to 58.7/121.5 GHz. At 28 GHz, the device achieved 3.02 W mm −1 output power ( P out ), 17.6% power-added efficiency ( PAE ), and 7.9 dB gain. In addition, power performance evaluated at both 6 GHz and 28 GHz showed clear improvements at 5 V and 10 V, with significantly greater enhancement observed at 20 V. These results demonstrate the effectiveness of ALE ohmic recess for high-power and high-performance mm-wave GaN-on-Si applications.
- 1 November 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (11) , 114004
Open AccessLow-Damage Atomic Layer Etching for Contact Resistance Reduction in Millimeter Wave AlGaN/GaN HEMTs on Si
High-performance AlGaN/GaN MOSHEMTs on Si were demonstrated using atomic layer etching (ALE) for ohmic recess. The ALE technique enabled atomic-scale precision and effectively mitigated plasma-induced damage, leading to a smoother surface morphology ( R RMS ) and a notable reduction in contact resistance ( R c ) to 0.15 Ω·mm. The fabricated device exhibited enhanced maximum drain current ( I DS, MAX ), transconductance ( g m ), and a more positive threshold voltage ( V th ), along with suppressed gate and drain lag. Owing to the reduction in access resistance ( R S and R D ) and parasitic capacitance ( C GS and C GD ) extracted from small-signal modeling, the current-gain cut-off frequency ( f T ) and maximum oscillation frequency ( f MAX ) were enhanced to 58.7/121.5 GHz. At 28 GHz, the device achieved 3.02 W mm −1 output power ( P out ), 17.6% power-added efficiency ( PAE ), and 7.9 dB gain. In addition, power performance evaluated at both 6 GHz and 28 GHz showed clear improvements at 5 V and 10 V, with significantly greater enhancement observed at 20 V. These results demonstrate the effectiveness of ALE ohmic recess for high-power and high-performance mm-wave GaN-on-Si applications.
- 2 October 2025
- Published by Elsevier in Solid-State Electronics
- Vol. 230
Enhancing ultra-thin-barrier AlGaN/GaN HEMTs with LPCVD SiN passivation for high-power applications
- 2 October 2025
- Published by Elsevier in Solid-State Electronics
- Vol. 230
Enhancing ultra-thin-barrier AlGaN/GaN HEMTs with LPCVD SiN passivation for high-power applications
- 25 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 24 (1536125X) , 42-47
Improvement of the Enhancement-Mode GaN MIS-HEMTs by Fluorine Doping in the Dielectric Gate Stack
This study tested fluorine doping on various regions of the ferroelectric charge trap gate stack (FEG stack). Fluorine doping effectively reduces oxygen vacancies in the dielectric layer, thus reducing leakage current and stabilizing charge in the dielectric layer. Moreover, fluorine doping can passivate the dangling bonds at the interface and increase the ability of trapping carriers in the trap layer. The FEG stack comprises a tunnel oxide layer (TL), a charge trap layer (CTL), and a ferroelectric layer (FE). Four types of devices were fabricated: undoped, doping in TL, doping in CTL, and doping in both TL and CTL, to investigate the impact of fluorine doping on the FEG gate stack. Devices doping in TL and CTL demonstrated superior performance, achieving the highest Vth of 5.4 V with a retention time of 70.42% after 10,000 seconds. The off-state and gate leakage tests revealed impressive breakdown voltages of 735 V and 24.55 V, respectively. Furthermore, the device exhibited a high operation voltage of 14.3 V for a 10-year lifetime prediction, enabling a wide operating range.
- 25 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 24 (1536125X) , 42-47
Improvement of the Enhancement-Mode GaN MIS-HEMTs by Fluorine Doping in the Dielectric Gate Stack
This study tested fluorine doping on various regions of the ferroelectric charge trap gate stack (FEG stack). Fluorine doping effectively reduces oxygen vacancies in the dielectric layer, thus reducing leakage current and stabilizing charge in the dielectric layer. Moreover, fluorine doping can passivate the dangling bonds at the interface and increase the ability of trapping carriers in the trap layer. The FEG stack comprises a tunnel oxide layer (TL), a charge trap layer (CTL), and a ferroelectric layer (FE). Four types of devices were fabricated: undoped, doping in TL, doping in CTL, and doping in both TL and CTL, to investigate the impact of fluorine doping on the FEG gate stack. Devices doping in TL and CTL demonstrated superior performance, achieving the highest Vth of 5.4 V with a retention time of 70.42% after 10,000 seconds. The off-state and gate leakage tests revealed impressive breakdown voltages of 735 V and 24.55 V, respectively. Furthermore, the device exhibited a high operation voltage of 14.3 V for a 10-year lifetime prediction, enabling a wide operating range.
- 13 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (6) , 3603-3608
The Effect of Fluorine Doping in the Charge Trapping Layer on Device Characteristics and Reliability of E-Mode GaN MIS-HEMTs
In this study, we investigate the device characteristics and reliability of the hybrid ferroelectric charge trap gate-stack enhancement-mode gallium nitride MIS-high electron mobility transistors (FEG-HEMTs) with various doping elements in the charge trapping layer (CTL). FEG-HEMTs were fabricated with fluorine-doped (F-HfO2) and nitrogen-doped HfO2 (HfON) films as the CTLs. Incorporating fluorine and nitrogen into HfO2 resulted in a notable decrease in oxygen vacancy and dangling bond densities. This, in turn, improved the interface stability and subsequently enhanced the device performance and reliability. The F-doped FEG-HEMT was confirmed to have high performance as well as high stability with high threshold voltage ( ${V}_{\text {th}})$ of 5.43 V, maximum drain current ( ${I}_{\text {D, {MAX}}})$ of 760.2 mA/mm, and breakdown voltage (BV) of 906 V. Furthermore, stress gate BV, retention time, time-dependent dielectric breakdown (TDDB), and constant stress bias test, which contribute significantly to the reliability of FEG gate-stack, are reported in this article.
- 13 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (6) , 3603-3608
The Effect of Fluorine Doping in the Charge Trapping Layer on Device Characteristics and Reliability of E-Mode GaN MIS-HEMTs
In this study, we investigate the device characteristics and reliability of the hybrid ferroelectric charge trap gate-stack enhancement-mode gallium nitride MIS-high electron mobility transistors (FEG-HEMTs) with various doping elements in the charge trapping layer (CTL). FEG-HEMTs were fabricated with fluorine-doped (F-HfO2) and nitrogen-doped HfO2 (HfON) films as the CTLs. Incorporating fluorine and nitrogen into HfO2 resulted in a notable decrease in oxygen vacancy and dangling bond densities. This, in turn, improved the interface stability and subsequently enhanced the device performance and reliability. The F-doped FEG-HEMT was confirmed to have high performance as well as high stability with high threshold voltage ( ${V}_{\text {th}})$ of 5.43 V, maximum drain current ( ${I}_{\text {D, {MAX}}})$ of 760.2 mA/mm, and breakdown voltage (BV) of 906 V. Furthermore, stress gate BV, retention time, time-dependent dielectric breakdown (TDDB), and constant stress bias test, which contribute significantly to the reliability of FEG gate-stack, are reported in this article.
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (9) , 4584-4590
High-Temperature TDDB Investigation on High Performance-Centered Hybrid HZO/HfON/Al2O3, Ferro-Electric Charge-Trap (FEG) GaN-HEMT
This article investigates a hybrid ferroelectric charge trap (HFCT)-based HfZrO4/HfO $_{\textit{X}}$ N $_{\textit{Y}}$ / Al2O3/AlGaN/GaN gate-stack under constant positive gate voltage stress over time and temperature variability. The experimentally characterized breakdown (BD) analysis implies a thermally assisted tunneling (TAT) BD owing to the negative temperature coefficient of BD voltage. Moreover, the step gate stress depicts a relatively lower BD voltage of $\sim$ 20 V compared to the linear gate stress voltage of $\sim$ 21.85 V attributed to performance degradation due to stress. In addition, the Weibull distribution, which validates the intrinsic degradation of the gate-stack, is used to estimate its lifetime. An operating voltage of $\sim$ 7.41 V exhibits a ten-year lifetime at 150 $^{\circ}$ C extrapolated over multiple stress conditions. Furthermore, the activation energy from $\sim$ 0.63 to $\sim$ 0.67 eV validates deep-level E3 traps within the GaN barrier layer and the trapping of electrons during degradation, thus, revealing the point-level defect generation leading to the time-dependent gate dielectric BD (TDDB). The robustness and superior reliability of the HFCT gate-stack are recognized, and the single degradation mechanism contributes to the final device failure in the TDDB test.
- 24 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (9) , 4584-4590
High-Temperature TDDB Investigation on High Performance-Centered Hybrid HZO/HfON/Al2O3, Ferro-Electric Charge-Trap (FEG) GaN-HEMT
This article investigates a hybrid ferroelectric charge trap (HFCT)-based HfZrO4/HfO $_{\textit{X}}$ N $_{\textit{Y}}$ / Al2O3/AlGaN/GaN gate-stack under constant positive gate voltage stress over time and temperature variability. The experimentally characterized breakdown (BD) analysis implies a thermally assisted tunneling (TAT) BD owing to the negative temperature coefficient of BD voltage. Moreover, the step gate stress depicts a relatively lower BD voltage of $\sim$ 20 V compared to the linear gate stress voltage of $\sim$ 21.85 V attributed to performance degradation due to stress. In addition, the Weibull distribution, which validates the intrinsic degradation of the gate-stack, is used to estimate its lifetime. An operating voltage of $\sim$ 7.41 V exhibits a ten-year lifetime at 150 $^{\circ}$ C extrapolated over multiple stress conditions. Furthermore, the activation energy from $\sim$ 0.63 to $\sim$ 0.67 eV validates deep-level E3 traps within the GaN barrier layer and the trapping of electrons during degradation, thus, revealing the point-level defect generation leading to the time-dependent gate dielectric BD (TDDB). The robustness and superior reliability of the HFCT gate-stack are recognized, and the single degradation mechanism contributes to the final device failure in the TDDB test.