Tsung-Ying Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tsung-Ying Yang has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Edward Yi Chang
Department of Materials Science and Engineering National Yang Ming Chiao Tung University Hsinchu 300 Taiwan
12 shared publications - Jui-Sheng Wu
National yang Ming Chiao Tung University
6 shared publications - Yan-Kui Liang
International College of Semiconductor Technology, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
4 shared publications Jui-Sheng Wu
Industry Academia Innovation School, National Yang Ming Chiao Tung University, Hsinchu 300, Taiwan
3 shared publicationsMei-Yan Kuo
Graduate Program for Nanotechnology, Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
3 shared publications- Shivendra K. Rathaur
Department of Electrical Engineering, Indian Institute of Technology Delhi, New Delhi, India
3 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6417-6423
Investigation of Leakage Mechanisms in Nonetched-Barrier AlGaN/GaN Schottky Barrier Diodes
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6417-6423
Investigation of Leakage Mechanisms in Nonetched-Barrier AlGaN/GaN Schottky Barrier Diodes
- Open Access
- 14 July 2026
- Published by Springer Nature in Discover Electronics
- Vol. 3 (1) , 101
Enhanced power performance and threshold voltage stability in quaternary InAlGaN/GaN MIS-HEMTs on Si with gate field plate
This work presents GaN-on-Si metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs) featuring a quaternary InAlGaN barrier and gate field plate (GFP) for power device applications. The proposed device has achieved a 40% increase in drain current and a 21.6% lower ON-resistance (R $$_{ON}$$ ) compared to conventional AlGaN/GaN HEMTs, due to a high carrier density of $$\sim$$ 1.9 $$\times 10^{13}\text{cm}^{-2},$$ high mobility of 1540 $$\text{cm}^{2}$$ /V·s. These enhancements yield a low specific ON-resistance (R $$_{ON,sp}$$ ) of 2.27 m $$\Omega$$ $$\cdot$$ cm $$^{2}$$ . The device also exhibits excellent breakdown performance, with a drain breakdown voltage of $$\sim$$ 950 V without Gate Field Plate (GFP) and >1500 V with GFP optimized at 4 $$\mu$$ m, enabled by a low sheet resistance (R $$_{sh}$$ ) of $$\sim$$ 215 $$\Omega$$ / $$\square$$ . Furthermore, thermal reliability is confirmed by a minimal threshold voltage (V $$_{TH}$$ ) of $$\sim$$ 0.4 V and a variation of approximately 20% in maximum drain current (I $$_{D,max}$$ ) at 150 $$^{\circ }$$ C. Moreover, this study attains a state-of-the-art achievement with a tradeoff of a high device figure-of-merit (FOM) on BV $$_{DS}^{2}$$ /R $$_{ON, sp}$$ of $$\sim$$ 1100 MW/cm $$^{2}$$ . In addition, we have also carried out the Long-term reliability under positive and negative bias temperature instability (PBTI/NBTI) stress tests under the specific bias of V $$_{GS}$$ =10 V, V $$_{DS}$$ =0 V and V $$_{GS}$$ = -30 V, V $$_{DS}$$ =0 V, respectively. It reveals that all GFP-equipped devices exhibit smaller V $$_{TH}$$ shifts under PBTI, while NBTI induces a slightly higher degradation, indicating distinct charge-trapping mechanisms in both processes.- 14 July 2026
- Published by Springer Nature in Discover Electronics
- Vol. 3 (1) , 101
Open AccessEnhanced power performance and threshold voltage stability in quaternary InAlGaN/GaN MIS-HEMTs on Si with gate field plate
This work presents GaN-on-Si metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs) featuring a quaternary InAlGaN barrier and gate field plate (GFP) for power device applications. The proposed device has achieved a 40% increase in drain current and a 21.6% lower ON-resistance (R $$_{ON}$$ ) compared to conventional AlGaN/GaN HEMTs, due to a high carrier density of $$\sim$$ 1.9 $$\times 10^{13}\text{cm}^{-2},$$ high mobility of 1540 $$\text{cm}^{2}$$ /V·s. These enhancements yield a low specific ON-resistance (R $$_{ON,sp}$$ ) of 2.27 m $$\Omega$$ $$\cdot$$ cm $$^{2}$$ . The device also exhibits excellent breakdown performance, with a drain breakdown voltage of $$\sim$$ 950 V without Gate Field Plate (GFP) and >1500 V with GFP optimized at 4 $$\mu$$ m, enabled by a low sheet resistance (R $$_{sh}$$ ) of $$\sim$$ 215 $$\Omega$$ / $$\square$$ . Furthermore, thermal reliability is confirmed by a minimal threshold voltage (V $$_{TH}$$ ) of $$\sim$$ 0.4 V and a variation of approximately 20% in maximum drain current (I $$_{D,max}$$ ) at 150 $$^{\circ }$$ C. Moreover, this study attains a state-of-the-art achievement with a tradeoff of a high device figure-of-merit (FOM) on BV $$_{DS}^{2}$$ /R $$_{ON, sp}$$ of $$\sim$$ 1100 MW/cm $$^{2}$$ . In addition, we have also carried out the Long-term reliability under positive and negative bias temperature instability (PBTI/NBTI) stress tests under the specific bias of V $$_{GS}$$ =10 V, V $$_{DS}$$ =0 V and V $$_{GS}$$ = -30 V, V $$_{DS}$$ =0 V, respectively. It reveals that all GFP-equipped devices exhibit smaller V $$_{TH}$$ shifts under PBTI, while NBTI induces a slightly higher degradation, indicating distinct charge-trapping mechanisms in both processes. - Open Access
- 1 December 2025
- Published by IOP Publishing in Applied Physics Express
- Vol. 18 (12) , 126501
High-frequency and high-power AlGaN/GaN MOSHEMTs fabricated using atomic layer etching for gate recess
Atomic layer etching (ALE) is demonstrated as a superior gate recess technique for AlGaN/GaN high-electron-mobility transistors (HEMTs) on Si, offering notable enhancements in high-frequency performance. By suppressing plasma-induced defects and reducing surface roughness, ALE minimizes interface traps and electron scattering, leading to a 16.7% increase in transconductance ( g m ), a nearly two-order reduction in gate leakage ( I GS ), and a significant positive shift in threshold voltage ( V th ). These improvements drive a substantial enhancement in f T / f MAX , a 15.2% increase in output power ( P out ), and a 51.1% boost in power-added-efficiency (PAE) at V DS = 20 V, positioning ALE as a promising approach for millimeter-wave power amplifiers.
- 1 December 2025
- Published by IOP Publishing in Applied Physics Express
- Vol. 18 (12) , 126501
Open AccessHigh-frequency and high-power AlGaN/GaN MOSHEMTs fabricated using atomic layer etching for gate recess
Atomic layer etching (ALE) is demonstrated as a superior gate recess technique for AlGaN/GaN high-electron-mobility transistors (HEMTs) on Si, offering notable enhancements in high-frequency performance. By suppressing plasma-induced defects and reducing surface roughness, ALE minimizes interface traps and electron scattering, leading to a 16.7% increase in transconductance ( g m ), a nearly two-order reduction in gate leakage ( I GS ), and a significant positive shift in threshold voltage ( V th ). These improvements drive a substantial enhancement in f T / f MAX , a 15.2% increase in output power ( P out ), and a 51.1% boost in power-added-efficiency (PAE) at V DS = 20 V, positioning ALE as a promising approach for millimeter-wave power amplifiers.
- Open Access
- 1 November 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (11) , 114004
Low-Damage Atomic Layer Etching for Contact Resistance Reduction in Millimeter Wave AlGaN/GaN HEMTs on Si
High-performance AlGaN/GaN MOSHEMTs on Si were demonstrated using atomic layer etching (ALE) for ohmic recess. The ALE technique enabled atomic-scale precision and effectively mitigated plasma-induced damage, leading to a smoother surface morphology ( R RMS ) and a notable reduction in contact resistance ( R c ) to 0.15 Ω·mm. The fabricated device exhibited enhanced maximum drain current ( I DS, MAX ), transconductance ( g m ), and a more positive threshold voltage ( V th ), along with suppressed gate and drain lag. Owing to the reduction in access resistance ( R S and R D ) and parasitic capacitance ( C GS and C GD ) extracted from small-signal modeling, the current-gain cut-off frequency ( f T ) and maximum oscillation frequency ( f MAX ) were enhanced to 58.7/121.5 GHz. At 28 GHz, the device achieved 3.02 W mm −1 output power ( P out ), 17.6% power-added efficiency ( PAE ), and 7.9 dB gain. In addition, power performance evaluated at both 6 GHz and 28 GHz showed clear improvements at 5 V and 10 V, with significantly greater enhancement observed at 20 V. These results demonstrate the effectiveness of ALE ohmic recess for high-power and high-performance mm-wave GaN-on-Si applications.
- 1 November 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (11) , 114004
Open AccessLow-Damage Atomic Layer Etching for Contact Resistance Reduction in Millimeter Wave AlGaN/GaN HEMTs on Si
High-performance AlGaN/GaN MOSHEMTs on Si were demonstrated using atomic layer etching (ALE) for ohmic recess. The ALE technique enabled atomic-scale precision and effectively mitigated plasma-induced damage, leading to a smoother surface morphology ( R RMS ) and a notable reduction in contact resistance ( R c ) to 0.15 Ω·mm. The fabricated device exhibited enhanced maximum drain current ( I DS, MAX ), transconductance ( g m ), and a more positive threshold voltage ( V th ), along with suppressed gate and drain lag. Owing to the reduction in access resistance ( R S and R D ) and parasitic capacitance ( C GS and C GD ) extracted from small-signal modeling, the current-gain cut-off frequency ( f T ) and maximum oscillation frequency ( f MAX ) were enhanced to 58.7/121.5 GHz. At 28 GHz, the device achieved 3.02 W mm −1 output power ( P out ), 17.6% power-added efficiency ( PAE ), and 7.9 dB gain. In addition, power performance evaluated at both 6 GHz and 28 GHz showed clear improvements at 5 V and 10 V, with significantly greater enhancement observed at 20 V. These results demonstrate the effectiveness of ALE ohmic recess for high-power and high-performance mm-wave GaN-on-Si applications.
- 21 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (3)
Demonstration of high threshold voltage Tri-gate hybrid ferroelectric gate stack GaN HEMT with 1.2 GW/cm2 Baliga's figure-of-merit and highly robust TDDB stability
This work demonstrates a highly robust time-dependent dielectric breakdown (TDDB) lifetime analysis and high threshold voltage (Vth) in a tri-gate metal–insulator–semiconductor high-electron-mobility transistor (MIS-HEMT). The combination of tetramethylammonium hydroxide treated tri-gate and hybrid ferroelectric gate stack allows effective depletion of the 2-DEG channel by trapped charges in the hafnium oxynitride charge-trapping layer, resulting in a high threshold voltage (Vth) of 3.15 ± 0.2 V, a higher off-state breakdown voltage of 870 V, a low specific on-resistance (RON-SP) of 0.64 mΩ cm2, a high maximum drain current density (IDS-MAX) of 987 ± 10 mA/mm, and an excellent high-power figure-of-merit up to 1.2 GW/cm2. Finally, a TDDB test analyzes the gate insulator degradation of GaN-based tri-gate MIS-HEMTs. The device demonstrates an operating voltage of 12.02 V at a failure rate of 1% for a 10-year lifetime at room temperature by fitting the data with a power law, which is the highest value amongst reported GaN HEMTs.
- 21 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (3)
Demonstration of high threshold voltage Tri-gate hybrid ferroelectric gate stack GaN HEMT with 1.2 GW/cm2 Baliga's figure-of-merit and highly robust TDDB stability
This work demonstrates a highly robust time-dependent dielectric breakdown (TDDB) lifetime analysis and high threshold voltage (Vth) in a tri-gate metal–insulator–semiconductor high-electron-mobility transistor (MIS-HEMT). The combination of tetramethylammonium hydroxide treated tri-gate and hybrid ferroelectric gate stack allows effective depletion of the 2-DEG channel by trapped charges in the hafnium oxynitride charge-trapping layer, resulting in a high threshold voltage (Vth) of 3.15 ± 0.2 V, a higher off-state breakdown voltage of 870 V, a low specific on-resistance (RON-SP) of 0.64 mΩ cm2, a high maximum drain current density (IDS-MAX) of 987 ± 10 mA/mm, and an excellent high-power figure-of-merit up to 1.2 GW/cm2. Finally, a TDDB test analyzes the gate insulator degradation of GaN-based tri-gate MIS-HEMTs. The device demonstrates an operating voltage of 12.02 V at a failure rate of 1% for a 10-year lifetime at room temperature by fitting the data with a power law, which is the highest value amongst reported GaN HEMTs.
- 1 July 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (7) , 070908
Ultra-low leakage current recess-free thin barrier AlGaN/GaN Schottky diodes featuring hybrid MOS/MIS GET anodes with optimized MOS-gate length and LPCVD SiN x thickness
In this letter, a recess-free thin-barrier AlGaN/GaN lateral Schottky diode with a hybrid MOS/MIS gate-edge-termination anode is presented, which reduces the reverse leakage current (I R) to the nA mm−1 level at a reverse bias (V R) of −200 V. High thermal stability is also demonstrated, with the leakage current limited to 304 nA mm−1 at 200 °C. By employing a recess-free process and optimizing both the MOS-gate length (L G) and the LPCVD SiN x thickness, the design balances leakage suppression with high forward-current performance, offering a new approach to high-efficiency GaN power rectifiers.
- 1 July 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (7) , 070908
Ultra-low leakage current recess-free thin barrier AlGaN/GaN Schottky diodes featuring hybrid MOS/MIS GET anodes with optimized MOS-gate length and LPCVD SiN x thickness
In this letter, a recess-free thin-barrier AlGaN/GaN lateral Schottky diode with a hybrid MOS/MIS gate-edge-termination anode is presented, which reduces the reverse leakage current (I R) to the nA mm−1 level at a reverse bias (V R) of −200 V. High thermal stability is also demonstrated, with the leakage current limited to 304 nA mm−1 at 200 °C. By employing a recess-free process and optimizing both the MOS-gate length (L G) and the LPCVD SiN x thickness, the design balances leakage suppression with high forward-current performance, offering a new approach to high-efficiency GaN power rectifiers.
- Open Access
- 1 January 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (1) , 01SP18
Impact of aluminum concentration variations on the performance of thin barrier enhancement-mode GaN MIS-HEMTs
This research explores the feasibility of employing thin AlGaN barriers as a substitute for the conventional gate recess process in GaN MIS-HEMTs. By systematically varying the AlGaN aluminum concentrations, we successfully fabricated devices exhibiting enhancement-mode (E-mode) operation. A ferroelectric charge trap gate stack (FEG gate stack) was integrated to elevate the threshold voltage (V th) and enhance device performance. Experimental characterization reveals the effectiveness of this approach in simplifying the fabrication process while maintaining desirable device characteristics. The influence of AlGaN barrier composition on threshold voltage, output current, breakdown voltage, double sweep test, and dynamic on-resistance is comprehensively analyzed.
- 1 January 2025
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 64 (1) , 01SP18
Open AccessImpact of aluminum concentration variations on the performance of thin barrier enhancement-mode GaN MIS-HEMTs
This research explores the feasibility of employing thin AlGaN barriers as a substitute for the conventional gate recess process in GaN MIS-HEMTs. By systematically varying the AlGaN aluminum concentrations, we successfully fabricated devices exhibiting enhancement-mode (E-mode) operation. A ferroelectric charge trap gate stack (FEG gate stack) was integrated to elevate the threshold voltage (V th) and enhance device performance. Experimental characterization reveals the effectiveness of this approach in simplifying the fabrication process while maintaining desirable device characteristics. The influence of AlGaN barrier composition on threshold voltage, output current, breakdown voltage, double sweep test, and dynamic on-resistance is comprehensively analyzed.
- 25 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 24 (1536125X) , 42-47
Improvement of the Enhancement-Mode GaN MIS-HEMTs by Fluorine Doping in the Dielectric Gate Stack
This study tested fluorine doping on various regions of the ferroelectric charge trap gate stack (FEG stack). Fluorine doping effectively reduces oxygen vacancies in the dielectric layer, thus reducing leakage current and stabilizing charge in the dielectric layer. Moreover, fluorine doping can passivate the dangling bonds at the interface and increase the ability of trapping carriers in the trap layer. The FEG stack comprises a tunnel oxide layer (TL), a charge trap layer (CTL), and a ferroelectric layer (FE). Four types of devices were fabricated: undoped, doping in TL, doping in CTL, and doping in both TL and CTL, to investigate the impact of fluorine doping on the FEG gate stack. Devices doping in TL and CTL demonstrated superior performance, achieving the highest Vth of 5.4 V with a retention time of 70.42% after 10,000 seconds. The off-state and gate leakage tests revealed impressive breakdown voltages of 735 V and 24.55 V, respectively. Furthermore, the device exhibited a high operation voltage of 14.3 V for a 10-year lifetime prediction, enabling a wide operating range.
- 25 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 24 (1536125X) , 42-47
Improvement of the Enhancement-Mode GaN MIS-HEMTs by Fluorine Doping in the Dielectric Gate Stack
This study tested fluorine doping on various regions of the ferroelectric charge trap gate stack (FEG stack). Fluorine doping effectively reduces oxygen vacancies in the dielectric layer, thus reducing leakage current and stabilizing charge in the dielectric layer. Moreover, fluorine doping can passivate the dangling bonds at the interface and increase the ability of trapping carriers in the trap layer. The FEG stack comprises a tunnel oxide layer (TL), a charge trap layer (CTL), and a ferroelectric layer (FE). Four types of devices were fabricated: undoped, doping in TL, doping in CTL, and doping in both TL and CTL, to investigate the impact of fluorine doping on the FEG gate stack. Devices doping in TL and CTL demonstrated superior performance, achieving the highest Vth of 5.4 V with a retention time of 70.42% after 10,000 seconds. The off-state and gate leakage tests revealed impressive breakdown voltages of 735 V and 24.55 V, respectively. Furthermore, the device exhibited a high operation voltage of 14.3 V for a 10-year lifetime prediction, enabling a wide operating range.
- 1 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (9) , 5788-5791
Improved Stability of BEOL-Compatible Highly Scaled Ultrathin InZnO Channel Ferroelectric Thin-Film Transistor With TiO₂ Interfacial Layer
In this study, we investigated the impact of inserting an interfacial layer (IL) between the InZnO channel and ZrO $_{\text{2}}$ /HfO $_{\text{2}}$ superlattice (SL) ferroelectric (FE) gate-stack on the performance and stability of highly scaled FE thin-film transistors (FeTFTs). FeTFTs with various channel lengths (50–750 nm) were characterized to reveal the impact of two IL (i.e., TiO $_{\text{2}}$ and Al $_{\text{2}}$ O $_{\text{3}}\text{)}$ on device characteristics. All the memory window (MW) contours of FeTFTs with a pulsewidth of 1 ms–100 ns and an amplitude of 2.5–5 V have been investigated. The FeTFT with TiO $_{\text{2}}$ IL demonstrated impressive stability in MW ( $\bm{\Delta} $ MW/MW $_{\text{1}\text{st cy}\text{cle}}$ $\bm{\le} $ 3.6%) up to 10 $^{\text{8}}$ cycles for a program/erase voltage of $\bm{\pm}$ 3 V and pulsewidth of 1 $\bm{\mu} $ s. It was suggested that the FeTFT with a higher dielectric constant $\text{(}\textit{k}\text{)}$ TiO $_{\text{2}}$ IL may reduce the electrical field and depolarization field at the interface between the channel and gate dielectric, as well as improve interfacial quality, thereby enhancing the reliability of FeTFTs.
- 1 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (9) , 5788-5791
Improved Stability of BEOL-Compatible Highly Scaled Ultrathin InZnO Channel Ferroelectric Thin-Film Transistor With TiO₂ Interfacial Layer
In this study, we investigated the impact of inserting an interfacial layer (IL) between the InZnO channel and ZrO $_{\text{2}}$ /HfO $_{\text{2}}$ superlattice (SL) ferroelectric (FE) gate-stack on the performance and stability of highly scaled FE thin-film transistors (FeTFTs). FeTFTs with various channel lengths (50–750 nm) were characterized to reveal the impact of two IL (i.e., TiO $_{\text{2}}$ and Al $_{\text{2}}$ O $_{\text{3}}\text{)}$ on device characteristics. All the memory window (MW) contours of FeTFTs with a pulsewidth of 1 ms–100 ns and an amplitude of 2.5–5 V have been investigated. The FeTFT with TiO $_{\text{2}}$ IL demonstrated impressive stability in MW ( $\bm{\Delta} $ MW/MW $_{\text{1}\text{st cy}\text{cle}}$ $\bm{\le} $ 3.6%) up to 10 $^{\text{8}}$ cycles for a program/erase voltage of $\bm{\pm}$ 3 V and pulsewidth of 1 $\bm{\mu} $ s. It was suggested that the FeTFT with a higher dielectric constant $\text{(}\textit{k}\text{)}$ TiO $_{\text{2}}$ IL may reduce the electrical field and depolarization field at the interface between the channel and gate dielectric, as well as improve interfacial quality, thereby enhancing the reliability of FeTFTs.
- 10 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 24 (3) , 414-421
Investigation on Traps Dynamics & Negative Bias Stress in D-Mode GaN-on-Si Power MIS HEMTs Under High-Temperature
This experimental study investigates the traps dynamics and threshold voltage (VTH) shift mechanism under negative bias temperature stress for the GaN-on-Si Power MIS HEMTs on field plate design structure. Based on the experimental analysis, two distinct activation energies (Ea) have been identified under the specific reverse bias conditions of VGS = -30 V and VDS = 0 V in a wide temperature range. Reverse bias stress experiments (up to 10 ks) show a positive VTH shift of 1.6 V at room temperature due to the inversion of the charges at the interface between the insulator and AlGaN layer, resulting in net negative charge near the gate region. Subsequently, there is a decrease in VTH shift till 125 ° C because of the de-trapping of the inversion charges. This phenomenon shows a strong correlation with a thermally activated activation energy of (E a ≈ 0.23 eV). Further, the shift in VTH turns negative when the temperature is raised to 175 ° C, indicating the accumulation of electrons in the channel layer with activation energy (Ea ≈ 0.78 eV) attributed to the activation of nitrogen interstitials from the GaN buffer layer. Additionally, the recovery (up to 10 ks) behavior demonstrates the exponential-linear settlement of the traps to recover the VTH shift. Moreover, nitrogen interstitials take more time to suppress the threshold voltage instabilities. These findings explain the VTH shift mechanisms in GaN-on-Si Power MIS HEMTs under NBTI.
- 10 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 24 (3) , 414-421
Investigation on Traps Dynamics & Negative Bias Stress in D-Mode GaN-on-Si Power MIS HEMTs Under High-Temperature
This experimental study investigates the traps dynamics and threshold voltage (VTH) shift mechanism under negative bias temperature stress for the GaN-on-Si Power MIS HEMTs on field plate design structure. Based on the experimental analysis, two distinct activation energies (Ea) have been identified under the specific reverse bias conditions of VGS = -30 V and VDS = 0 V in a wide temperature range. Reverse bias stress experiments (up to 10 ks) show a positive VTH shift of 1.6 V at room temperature due to the inversion of the charges at the interface between the insulator and AlGaN layer, resulting in net negative charge near the gate region. Subsequently, there is a decrease in VTH shift till 125 ° C because of the de-trapping of the inversion charges. This phenomenon shows a strong correlation with a thermally activated activation energy of (E a ≈ 0.23 eV). Further, the shift in VTH turns negative when the temperature is raised to 175 ° C, indicating the accumulation of electrons in the channel layer with activation energy (Ea ≈ 0.78 eV) attributed to the activation of nitrogen interstitials from the GaN buffer layer. Additionally, the recovery (up to 10 ks) behavior demonstrates the exponential-linear settlement of the traps to recover the VTH shift. Moreover, nitrogen interstitials take more time to suppress the threshold voltage instabilities. These findings explain the VTH shift mechanisms in GaN-on-Si Power MIS HEMTs under NBTI.