Hua-Lun Ko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hua-Lun Ko has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Edward Yi Chang
Department of Materials Science and Engineering National Yang Ming Chiao Tung University Hsinchu 300 Taiwan
6 shared publications - Quang Ho Luc
Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
6 shared publications - Ping Huang
International College of Semiconductor Technology, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
5 shared publications Jing-Yuan Wu
International College of Semiconductor Technology, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
3 shared publicationsNhan-Ai Tran
Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
3 shared publications- Si-Meng Chen
Institute of Science Tokyo
3 shared publications
Latest Publications
- 9 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 22 (1536125X) , 445-448
High Performance Inversion-Mode In0.53Ga0.47As FinFETs for Logic and RF Applications
An inversion-mode In 0.53 Ga 0.47 As FinFET exhibiting a transition frequency (fT) of 271 GHz and a maximum oscillation frequency (f max ) of 78 GHz at V ds = 0.5 V is reported in this work. Simultaneously, the transconductance (gm) of 2056 (μS/μm) and drain induced barrier lowering (DIBL) of 121 (mV/V) obtained were also exhibited. Moreover, a subthreshold swing (SS) of 86 and 97 (mV/dec) was obtained at V ds = 0.05 and 0.5 V, respectively. These exceptional properties are the result of employing N 2 remote plasma treatment, enhancing the quality of high-k/III-V interface and carrier mobility. The fin structure contributes to good suppression of short channel effects (SCEs), and the superior transfer characteristics are due to the improved gate controllability. We also extracted an effective electron velocity (ν eff ) of 2.18×10 7 (cm/s) by delay time analysis, providing a probable explanation for the obtained fT performance. This work explicitly exhibits the potential of high-performance inversion-mode InGaAs FinFETs, positioning them as promising candidates for future high-frequency system applications.
- 9 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 22 (1536125X) , 445-448
High Performance Inversion-Mode In0.53Ga0.47As FinFETs for Logic and RF Applications
An inversion-mode In 0.53 Ga 0.47 As FinFET exhibiting a transition frequency (fT) of 271 GHz and a maximum oscillation frequency (f max ) of 78 GHz at V ds = 0.5 V is reported in this work. Simultaneously, the transconductance (gm) of 2056 (μS/μm) and drain induced barrier lowering (DIBL) of 121 (mV/V) obtained were also exhibited. Moreover, a subthreshold swing (SS) of 86 and 97 (mV/dec) was obtained at V ds = 0.05 and 0.5 V, respectively. These exceptional properties are the result of employing N 2 remote plasma treatment, enhancing the quality of high-k/III-V interface and carrier mobility. The fin structure contributes to good suppression of short channel effects (SCEs), and the superior transfer characteristics are due to the improved gate controllability. We also extracted an effective electron velocity (ν eff ) of 2.18×10 7 (cm/s) by delay time analysis, providing a probable explanation for the obtained fT performance. This work explicitly exhibits the potential of high-performance inversion-mode InGaAs FinFETs, positioning them as promising candidates for future high-frequency system applications.
- Open Access
- 6 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 10, 854-859
The Impact of Width Downscaling on the High-Frequency Characteristics of InGaAs Nanowire FETs
This work demonstrates the high-frequency characteristics of In0.53Ga0.47As nanowire with scaled wire width by implementing TCAD simulations. The physical models and correlated parameters have been calibrated to the experiments in the literature 19. As the width of the nanowire is scaled to 10 nm, the electron density peaks are no longer located close to the oxide/semiconductor interface. Instead, the peaks merge and volume inversion effects appear due to the strong quantum confinement. The volume inversion effects lead to higher cut-off frequency due to the reduced total transport delay time. To have a better understanding of this phenomena, the high-frequency properties of nanowire were quantified with the assistance of small-signal analysis and delay time analysis using TCAD. It is found that the channel charging delay increases with narrower wire width due to the raise of source/drain resistance. Regarding the extrinsic and intrinsic delay, they increase with smaller wire width and drop at width of 10 nm due to the volume inversion effects. Electron distribution which aims to clarify the abovementioned observation is also plotted.
- 6 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 10, 854-859
Open AccessThe Impact of Width Downscaling on the High-Frequency Characteristics of InGaAs Nanowire FETs
This work demonstrates the high-frequency characteristics of In0.53Ga0.47As nanowire with scaled wire width by implementing TCAD simulations. The physical models and correlated parameters have been calibrated to the experiments in the literature 19. As the width of the nanowire is scaled to 10 nm, the electron density peaks are no longer located close to the oxide/semiconductor interface. Instead, the peaks merge and volume inversion effects appear due to the strong quantum confinement. The volume inversion effects lead to higher cut-off frequency due to the reduced total transport delay time. To have a better understanding of this phenomena, the high-frequency properties of nanowire were quantified with the assistance of small-signal analysis and delay time analysis using TCAD. It is found that the channel charging delay increases with narrower wire width due to the raise of source/drain resistance. Regarding the extrinsic and intrinsic delay, they increase with smaller wire width and drop at width of 10 nm due to the volume inversion effects. Electron distribution which aims to clarify the abovementioned observation is also plotted.
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4183-4187
Electrical Characteristics of In0.53Ga0.47As Gate-All-Around MOSFETs With Different Nanowire Shapes
In this article, we investigate the electrical properties of In$_{\text{0.53}}$ Ga$_{\text{0.47}}$ As gate-all-around (GAA) MOSFETs with different nanowire shapes. InGaAs GAA MOSFETs with trapezoid and triangle nanowire shapes have been fabricated and characterized. Improved output performance was observed as the nanowire top width reduces from 20 to 11 nm. It was found that the electrical characteristics degraded as the nanowire top width was decreased to nearly 0 nm. To explain the carrier transport mechanism in ultralow-scale devices, TCAD simulation has been performed to study the electron density distribution for different nanowire widths and explain the transport mechanism in these ultralow-scale transistor devices.- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4183-4187
Electrical Characteristics of In0.53Ga0.47As Gate-All-Around MOSFETs With Different Nanowire Shapes
In this article, we investigate the electrical properties of In$_{\text{0.53}}$ Ga$_{\text{0.47}}$ As gate-all-around (GAA) MOSFETs with different nanowire shapes. InGaAs GAA MOSFETs with trapezoid and triangle nanowire shapes have been fabricated and characterized. Improved output performance was observed as the nanowire top width reduces from 20 to 11 nm. It was found that the electrical characteristics degraded as the nanowire top width was decreased to nearly 0 nm. To explain the carrier transport mechanism in ultralow-scale devices, TCAD simulation has been performed to study the electron density distribution for different nanowire widths and explain the transport mechanism in these ultralow-scale transistor devices.- Open Access
- 8 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 10, 188-191
Sub-10 nm Top Width Nanowire InGaAs Gate-All-Around MOSFETs With Improved Subthreshold Characteristics and Device Reliability
In this article, sub-10 nm top width nanowire In0.53Ga0.47As gate-all-around (GAA) MOSFETs with improved subthreshold characteristics and reliability are demonstrated. These devices exhibit a significant improvement in the subthreshold performances with subthreshold swing (SS) of 70 mV/dec, drain induced barrier lowering (DIBL) of 46 mV/V, and off-current (Ioff) of 1.6 × 10-4 μA/μm for InGaAs GAA MOSFETs. Effective control of short channel effects (SCEs) is confirmed by the error bar of statistical variation analysis. Under gate bias stress, a low degradation of SS and threshold voltage (Vth) shift has been achieved due to N2 RP treatment of the InGaAs GAA MOSFETs. The superior performance can be attributed to the strong electrostatic control and high quality of high-κ/InGaAs interface, originating from shrinking nanowire width and RP passivation effects. These results show the developed GAA MOSFET devices have good potential for future low-power high-switching speed CMOS logic applications.
- 8 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 10, 188-191
Open AccessSub-10 nm Top Width Nanowire InGaAs Gate-All-Around MOSFETs With Improved Subthreshold Characteristics and Device Reliability
In this article, sub-10 nm top width nanowire In0.53Ga0.47As gate-all-around (GAA) MOSFETs with improved subthreshold characteristics and reliability are demonstrated. These devices exhibit a significant improvement in the subthreshold performances with subthreshold swing (SS) of 70 mV/dec, drain induced barrier lowering (DIBL) of 46 mV/V, and off-current (Ioff) of 1.6 × 10-4 μA/μm for InGaAs GAA MOSFETs. Effective control of short channel effects (SCEs) is confirmed by the error bar of statistical variation analysis. Under gate bias stress, a low degradation of SS and threshold voltage (Vth) shift has been achieved due to N2 RP treatment of the InGaAs GAA MOSFETs. The superior performance can be attributed to the strong electrostatic control and high quality of high-κ/InGaAs interface, originating from shrinking nanowire width and RP passivation effects. These results show the developed GAA MOSFET devices have good potential for future low-power high-switching speed CMOS logic applications.
- 20 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (2) , 495-499
Nitrogen-Passivated (010) In0.53Ga0.47As FinFETs With High Peak g m and Reduced Leakage Current
In this article, InGaAs FinFETs using (010) orientation channel and nitrogen post remote plasma (RP) treatment have been fabricated. This device exhibits a peak transconductance, ${g}_{m}$ , of 2727 $\mu \text{S}/\mu \text{m}$ which is among the highest values reported for In 0.53 Ga 0.47 As FinFETs. In addition, subthreshold performances are improved with leakage current ( ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ ) of $1.13\times 10^{-{4}}~\mu \text{A}/\mu \text{m}$ , subthreshold swing (SS) of 78 mV/dec, drain-induced barrier lowering (DIBL) of 55 mV/V, and equivalent oxide thickness (EOT) ~0.8 nm. These excellent results are attributed to the strong electrostatic control and the superior high- $\kappa $ /InGaAs interface quality achieved by scaled fin width and RP passivation.
- 20 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (2) , 495-499
Nitrogen-Passivated (010) In0.53Ga0.47As FinFETs With High Peak g m and Reduced Leakage Current
In this article, InGaAs FinFETs using (010) orientation channel and nitrogen post remote plasma (RP) treatment have been fabricated. This device exhibits a peak transconductance, ${g}_{m}$ , of 2727 $\mu \text{S}/\mu \text{m}$ which is among the highest values reported for In 0.53 Ga 0.47 As FinFETs. In addition, subthreshold performances are improved with leakage current ( ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ ) of $1.13\times 10^{-{4}}~\mu \text{A}/\mu \text{m}$ , subthreshold swing (SS) of 78 mV/dec, drain-induced barrier lowering (DIBL) of 55 mV/V, and equivalent oxide thickness (EOT) ~0.8 nm. These excellent results are attributed to the strong electrostatic control and the superior high- $\kappa $ /InGaAs interface quality achieved by scaled fin width and RP passivation.
- 5 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 42 (9) , 1299-1302
Demonstration of Highly Robust 5 nm Hf0.5Zr0.5O₂ Ultra-Thin Ferroelectric Capacitor by Improving Interface Quality
In this letter, 5 nm-thick HZO ultra-thin ferroelectric capacitors with excellent remanent polarization (P r ) and reliability are presented. The TiN/HZO/TiN metal-ferroelectric-metal (MFM) capacitor stack was deposited consecutively in the same atomic layer deposition (ALD) system without breaking the vacuum (i.e. “in-situ” like) to improve the interface quality between TiN electrodes and HZO ferroelectric layer. The samples show high P r of 20.5 μC/cm 2 (i.e. 2P r = 41 μC/cm 2 ) under driving voltage of 3 V with low coercive voltage of approximately 0.6 V. The robustness of the MFM capacitor was presented by the outstanding endurance characteristics for keeping 2P r value higher than 20 μC/cm 2 after 10 10 cycles at a high electric field of 5 MV/cm without breakdown, though the P r values gradually degrade with cycles at low field (i.e. 2.4 MV/cm). The highly robust endurance characteristics of the 5nm-thick HZO MFM capacitor indicate the good interface quality achieved in this study.
- 5 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 42 (9) , 1299-1302
Demonstration of Highly Robust 5 nm Hf0.5Zr0.5O₂ Ultra-Thin Ferroelectric Capacitor by Improving Interface Quality
In this letter, 5 nm-thick HZO ultra-thin ferroelectric capacitors with excellent remanent polarization (P r ) and reliability are presented. The TiN/HZO/TiN metal-ferroelectric-metal (MFM) capacitor stack was deposited consecutively in the same atomic layer deposition (ALD) system without breaking the vacuum (i.e. “in-situ” like) to improve the interface quality between TiN electrodes and HZO ferroelectric layer. The samples show high P r of 20.5 μC/cm 2 (i.e. 2P r = 41 μC/cm 2 ) under driving voltage of 3 V with low coercive voltage of approximately 0.6 V. The robustness of the MFM capacitor was presented by the outstanding endurance characteristics for keeping 2P r value higher than 20 μC/cm 2 after 10 10 cycles at a high electric field of 5 MV/cm without breakdown, though the P r values gradually degrade with cycles at low field (i.e. 2.4 MV/cm). The highly robust endurance characteristics of the 5nm-thick HZO MFM capacitor indicate the good interface quality achieved in this study.