Saravanan Kandhasamy Ganesan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Saravanan Kandhasamy Ganesan has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Kumaar Jeevarathnam Ravi Kumar Vinod
Department of Mechanical Engineering, Dr. N. G. P. Institute of Technology, Coimbatore, 641048, India
2 shared publications - R. Prabu
Department of Mechanical Engineering
2 shared publications - A. R. Venkataramanan
Department of Mechanical Engineering
1 shared publication - A. Sivapragasam
Department of Mechanical Engineering
1 shared publication - Deepak Janardhanan
Department of Manufacturing Engineering, College of Engineering Guindy, Anna University, Chennai, India
1 shared publication - Eden Tekle Beyessa
School of Biomedical Engineering,Jimma Institute of Technology
1 shared publication
Latest Publications
- Open Access
- 14 November 2026
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- Vol. 16
Experimental investigation of electrochemical machining performance of AISI 304 stainless steel using a palladium-coated electrode with ascorbic acid - mixed electrolyte
Passive film generation, buildup of insoluble hydroxide sludge, and dimensional errors caused by uncontrolled anodic dissolution are issues that arise during electrochemical machining (ECM) of AISI 304 stainless steel (SS). While electrode coatings and electrolyte additives have been studied separately, the combination of palladium (Pd)-coated electrodes and ascorbic acid-modified electrolytes to enhance ECM performance has received less attention. Using a Pd-coated needle electrode and a sodium nitrate (NaNO3) electrolyte containing 10 g L-1 ascorbic acid, this study experimentally analyses the machining properties of AISI 304 SS. The effects on machining rate (MR) and overcut (OC) of electrolyte concentration (0.328 to 0.386 mol L-2), machining voltage (7 to 12 V), duty cycle (40 to 90 %), and pulse frequency (40 to 90 Hz) were methodically assessed. The machined-hole shape was examined using scanning electron microscopy (SEM), and the electrode substrate was characterized using energy-dispersive X-ray spectroscopy. Experimental data show that increasing electrolyte concentration, machining voltage, duty cycle, and pulse frequency enhanced MR and decreased OC within the examined ranges. With a 58.4 % improvement in MR from 0.219 to 0.347 μm s-1 and a 23.4 % decrease in OC from 290 to 222 μm when frequency increased from 40 to 90 Hz, pulse frequency showed the greatest increase in MR. At an electrolyte concentration of 0.386 mol L-1, a machining voltage of 12 V, a 90 % duty cycle, and a pulse frequency of 90 Hz, the maximum recorded MR of 0.347 μm s-1 with an OC of 222 μm was attained. Nearly circular machined holes with comparatively clean edges and few surface deposits were visible in SEM examinations, suggesting regulated anodic dissolution. By reducing Fe3+ to Fe2+, ascorbic acid is suggested to prevent the formation of insoluble ferric hydroxide, promoting electrolyte stability and eliminating reaction products. Using a Pd-coated electrode and an electrolyte modified with ascorbic acid, the study determines an experimentally assessed processing window for ECM of AISI 304 stainless steel, offering insights into increasing machining productivity and dimensional correctness.
- 14 November 2026
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- Vol. 16
Open AccessExperimental investigation of electrochemical machining performance of AISI 304 stainless steel using a palladium-coated electrode with ascorbic acid - mixed electrolyte
Passive film generation, buildup of insoluble hydroxide sludge, and dimensional errors caused by uncontrolled anodic dissolution are issues that arise during electrochemical machining (ECM) of AISI 304 stainless steel (SS). While electrode coatings and electrolyte additives have been studied separately, the combination of palladium (Pd)-coated electrodes and ascorbic acid-modified electrolytes to enhance ECM performance has received less attention. Using a Pd-coated needle electrode and a sodium nitrate (NaNO3) electrolyte containing 10 g L-1 ascorbic acid, this study experimentally analyses the machining properties of AISI 304 SS. The effects on machining rate (MR) and overcut (OC) of electrolyte concentration (0.328 to 0.386 mol L-2), machining voltage (7 to 12 V), duty cycle (40 to 90 %), and pulse frequency (40 to 90 Hz) were methodically assessed. The machined-hole shape was examined using scanning electron microscopy (SEM), and the electrode substrate was characterized using energy-dispersive X-ray spectroscopy. Experimental data show that increasing electrolyte concentration, machining voltage, duty cycle, and pulse frequency enhanced MR and decreased OC within the examined ranges. With a 58.4 % improvement in MR from 0.219 to 0.347 μm s-1 and a 23.4 % decrease in OC from 290 to 222 μm when frequency increased from 40 to 90 Hz, pulse frequency showed the greatest increase in MR. At an electrolyte concentration of 0.386 mol L-1, a machining voltage of 12 V, a 90 % duty cycle, and a pulse frequency of 90 Hz, the maximum recorded MR of 0.347 μm s-1 with an OC of 222 μm was attained. Nearly circular machined holes with comparatively clean edges and few surface deposits were visible in SEM examinations, suggesting regulated anodic dissolution. By reducing Fe3+ to Fe2+, ascorbic acid is suggested to prevent the formation of insoluble ferric hydroxide, promoting electrolyte stability and eliminating reaction products. Using a Pd-coated electrode and an electrolyte modified with ascorbic acid, the study determines an experimentally assessed processing window for ECM of AISI 304 stainless steel, offering insights into increasing machining productivity and dimensional correctness.
- 8 October 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Multi-objective precision optimization of μ-ECM performance for Hastelloy C-22 using hybrid AHP–MOORA analysis
Hastelloy C22 is a nickel-based superalloy utilized in chemical processing, aero engines, and pollution control equipment. Electrochemical micromachining is a suitable process for addressing the formidable hardness of nickel alloys, alongside the challenges of miniaturization. However, achieving a precise surface finish and dimensional characteristics in the microchannels of chemical reactors and microfluidic channels presents a potential avenue for this research. In this study, Hastelloy C22 was machined using a brass tool of 500 µm under two electrolyte combinations, namely sodium chloride (NaCl) + sodium nitrate (NaNO 3 ) and sodium bromide (NaBr) + sodium nitrate (NaNO 3 ). Two sets of Taguchi's L9 runs were employed to derive the machining performance with applied voltage, electrolyte concentration, tool feed rate, and duty cycle as input variables. The output responses considered in this study include material removal rate, surface roughness, radial overcut, and taper angle. The results of the analysis of variance showed that variations in voltage and duty cycle are statistically significant factors impacting the output responses. The results from the analytical hierarchy process (AHP)–MOORA (multi-objective optimization by ratio analysis) method showed that the best results from the NaBr and NaNO 3 mixture produced surface roughness (0.176 µm), taper angle (23.47°), material removal rate (0.0366 mm 3 /min) and radial overcut (0.418 mm) comparably better than those using the NaNO 3 + NaCl mixture. Using a combination of NaBr and NaNO 3 has shown to provide synergistic effects that work to provide superior control of the dissolution and surface refinement of Hastelloy C22.
- 8 October 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Multi-objective precision optimization of μ-ECM performance for Hastelloy C-22 using hybrid AHP–MOORA analysis
Hastelloy C22 is a nickel-based superalloy utilized in chemical processing, aero engines, and pollution control equipment. Electrochemical micromachining is a suitable process for addressing the formidable hardness of nickel alloys, alongside the challenges of miniaturization. However, achieving a precise surface finish and dimensional characteristics in the microchannels of chemical reactors and microfluidic channels presents a potential avenue for this research. In this study, Hastelloy C22 was machined using a brass tool of 500 µm under two electrolyte combinations, namely sodium chloride (NaCl) + sodium nitrate (NaNO 3 ) and sodium bromide (NaBr) + sodium nitrate (NaNO 3 ). Two sets of Taguchi's L9 runs were employed to derive the machining performance with applied voltage, electrolyte concentration, tool feed rate, and duty cycle as input variables. The output responses considered in this study include material removal rate, surface roughness, radial overcut, and taper angle. The results of the analysis of variance showed that variations in voltage and duty cycle are statistically significant factors impacting the output responses. The results from the analytical hierarchy process (AHP)–MOORA (multi-objective optimization by ratio analysis) method showed that the best results from the NaBr and NaNO 3 mixture produced surface roughness (0.176 µm), taper angle (23.47°), material removal rate (0.0366 mm 3 /min) and radial overcut (0.418 mm) comparably better than those using the NaNO 3 + NaCl mixture. Using a combination of NaBr and NaNO 3 has shown to provide synergistic effects that work to provide superior control of the dissolution and surface refinement of Hastelloy C22.
- 8 April 2025
- Published by World Scientific Pub Co Pte Ltd in SPIN
Optimizing Spark Ignition Engine Performance and Emission Control with Spike Neural Networks Using Gasoline–Ethanol Blends
This study introduces a novel approach utilizing Spike Neural Networks (SNNs) to analyze the performance and emissions of pollutants of a 4-stroke Spark Ignition (SI) engine running on ethanol–gasoline blends. By dynamically adjusting synaptic weights based on various application data, the SNNs technique aims to enhance the solution model for improved exploration and exploitation. Isoamyl alcohol is utilized at high Compression Ratios (CR) in SI engines to boost performance and reduce emissions. The main objectives of the SNNs approach are to evaluate waste products as potential alternative fuels, improve the performance of the engine and lower emissions. Using a variety of gasoline–ethanol combinations and speed conditions as input data, the SNNs model predicts relationships between braking power, Brake-Specific Fuel Consumption (BSFC), thermal and volumetric efficiency, torque and components of emissions. Performance evaluation is conducted using MATLAB, comparing against existing methods like Heap-based Optimizer (HBO), Color Harmony Algorithm (CHA) and Random Forest Algorithm (RFA). Results show low Mean Relative Errors (MRE) ranging from 0.46% to 5.57% and relatively low Root Mean Square Errors (RMSE) compared to existing approaches.
- 8 April 2025
- Published by World Scientific Pub Co Pte Ltd in SPIN
Optimizing Spark Ignition Engine Performance and Emission Control with Spike Neural Networks Using Gasoline–Ethanol Blends
This study introduces a novel approach utilizing Spike Neural Networks (SNNs) to analyze the performance and emissions of pollutants of a 4-stroke Spark Ignition (SI) engine running on ethanol–gasoline blends. By dynamically adjusting synaptic weights based on various application data, the SNNs technique aims to enhance the solution model for improved exploration and exploitation. Isoamyl alcohol is utilized at high Compression Ratios (CR) in SI engines to boost performance and reduce emissions. The main objectives of the SNNs approach are to evaluate waste products as potential alternative fuels, improve the performance of the engine and lower emissions. Using a variety of gasoline–ethanol combinations and speed conditions as input data, the SNNs model predicts relationships between braking power, Brake-Specific Fuel Consumption (BSFC), thermal and volumetric efficiency, torque and components of emissions. Performance evaluation is conducted using MATLAB, comparing against existing methods like Heap-based Optimizer (HBO), Color Harmony Algorithm (CHA) and Random Forest Algorithm (RFA). Results show low Mean Relative Errors (MRE) ranging from 0.46% to 5.57% and relatively low Root Mean Square Errors (RMSE) compared to existing approaches.
- 18 March 2025
- Published by SAGE Publications in Intelligent Decision Technologies
- Vol. 19 (4) , 2563-2574
Application of multi-criteria decision making techniques for selection of wire-EDM process parameters
Wire Electric Discharge Machining (WEDM) is essential in precision machining, particularly for complex components. While previous research has investigated the optimisation of WEDM parameters for a variety of materials, little emphasis has been paid to aluminium metal matrix composites (AMMCs) reinforced with Al 2 O 3 . This work uses a unique method to optimise WEDM parameters—gap voltage (Vg), input current (IP), wire tension (WT), and dielectric pressure (Pd)—for machining Al6061 alloy reinforced with 6% Al 2 O 3 . Unlike previous research, which frequently focusses on single methodologies, this study compares three Multi-Criteria Decision-Making (MCDM) techniques: Grey Relational Analysis (GRA), Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), and Vise Kriterijumska Optimizacija Kompromisno Resenje (VIKOR). The findings provide novel insights into the optimal parameter combinations for achieving high machining rate (MR) and exceptional surface finish (Ra), bridging the parameter optimisation gap for AMMCs in WEDM applications.
- 18 March 2025
- Published by SAGE Publications in Intelligent Decision Technologies
- Vol. 19 (4) , 2563-2574
Application of multi-criteria decision making techniques for selection of wire-EDM process parameters
Wire Electric Discharge Machining (WEDM) is essential in precision machining, particularly for complex components. While previous research has investigated the optimisation of WEDM parameters for a variety of materials, little emphasis has been paid to aluminium metal matrix composites (AMMCs) reinforced with Al 2 O 3 . This work uses a unique method to optimise WEDM parameters—gap voltage (Vg), input current (IP), wire tension (WT), and dielectric pressure (Pd)—for machining Al6061 alloy reinforced with 6% Al 2 O 3 . Unlike previous research, which frequently focusses on single methodologies, this study compares three Multi-Criteria Decision-Making (MCDM) techniques: Grey Relational Analysis (GRA), Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), and Vise Kriterijumska Optimizacija Kompromisno Resenje (VIKOR). The findings provide novel insights into the optimal parameter combinations for achieving high machining rate (MR) and exceptional surface finish (Ra), bridging the parameter optimisation gap for AMMCs in WEDM applications.
- 28 June 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (16) , 19369-19381
Effect of cassava tuber nanocellulose and satin weaved bamboo fiber addition on mechanical, wear, hydrophobic, and thermal behavior of unsaturated polyester resin composites
- 28 June 2023
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 14 (16) , 19369-19381
Effect of cassava tuber nanocellulose and satin weaved bamboo fiber addition on mechanical, wear, hydrophobic, and thermal behavior of unsaturated polyester resin composites
- Open Access
- 22 February 2023
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2023, 1-9
Optimization of Process Parameters in Electrochemical Micromachining of AMCs by Using Different Techniques of Weight Evaluation
The application of electrode heating is proposed in electrochemical micromachining (EMM). In the EMM process, the temperature of the electrode, voltage, duty cycle, and electrolyte concentration are considered process parameters. Taguchi L18 mixed-level orthogonal array (OA) design was adopted for designing the experiments and this study highlights the effect of temperature on responses such as radial overcut (ROC), material removal rate (MRR), and conicity factor (CF). In addition, multicriterion design making (MCDM) with VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje, i.e., multi-criteria optimization and compromise solution) technique is used for finding the best alternatives based on the distinct weight assessing methods such as equal weights method (EWM), analytic hierarchy process (AHP), and entropy-based weights method (EBWM). Furthermore, a confirmation test is also conducted to find the best optimal parameters and their levels among the EWM-VIKOR, AHP-VIKOR, and EBWM-VIKOR. The results revealed that AHP-VIKOR provides a maximum improvement of 0.945 among the three methods.
- 22 February 2023
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2023, 1-9
Open AccessOptimization of Process Parameters in Electrochemical Micromachining of AMCs by Using Different Techniques of Weight Evaluation
The application of electrode heating is proposed in electrochemical micromachining (EMM). In the EMM process, the temperature of the electrode, voltage, duty cycle, and electrolyte concentration are considered process parameters. Taguchi L18 mixed-level orthogonal array (OA) design was adopted for designing the experiments and this study highlights the effect of temperature on responses such as radial overcut (ROC), material removal rate (MRR), and conicity factor (CF). In addition, multicriterion design making (MCDM) with VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje, i.e., multi-criteria optimization and compromise solution) technique is used for finding the best alternatives based on the distinct weight assessing methods such as equal weights method (EWM), analytic hierarchy process (AHP), and entropy-based weights method (EBWM). Furthermore, a confirmation test is also conducted to find the best optimal parameters and their levels among the EWM-VIKOR, AHP-VIKOR, and EBWM-VIKOR. The results revealed that AHP-VIKOR provides a maximum improvement of 0.945 among the three methods.
- RetractedOpen Access
- 1 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
[Retracted] Comparative Analysis of Natural Fibre Reinforced Composite Material Using ANSYS
The regulations of legislative bodies regarding the recycling and reusage of automotive materials has caused a great deal of obligation among automotive manufacturers to use natural fibres or green composites. Green composites or more commonly known as bio‐composites are made up of natural fibres. Natural fibres are used by humankind since prehistoric times. The natural fibre is obtained from plants as well as animals. Since the natural fibre is obtained from natural as well as biological resources, it is biodegradable and recyclable. This paper presents the study and analysis conducted to address the suitability of natural fibre in the automotive industry. This paper discusses the finite element analysis of four different natural fibre composites used for making car door panel, i.e., flax, jute, sisal, and leather are taken for the material study. This paper helps to find the effectiveness of each of the four natural fibre composites that have already been used in the automotive sector. This paper includes the analysis of four different natural fibres with and without the addition of the aluminium as the reinforcement material. This project revolves around the design of the composite fibre sheet and analysis of the mechanical parameters such as equivalent stress, shear stress, strain, deformation, and so on. The studies and observations of the analysis showed that the natural fibre with the aluminium reinforcement proved to be much stronger than that without the reinforcement. The results of finite element analysis showcased lowest total deformation and equivalent strain in the flax as 1.026 m and 0.017 mm/mm, respectively. However, sisal showed the lowest equivalent stress and shear stress which were 68.09 and 38.178 MPa, respectively. Additionally, leather showed the highest amount of stress, strain, and deformation, and hence leather was deemed to have undesirable properties regarding the usage in car door panels. All the materials except leather were found to be safe under the loading conditions. Hence, the flax fibre is recommended by the project to have superior properties compared to the other materials.
- 1 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
RetractedOpen Access[Retracted] Comparative Analysis of Natural Fibre Reinforced Composite Material Using ANSYS
The regulations of legislative bodies regarding the recycling and reusage of automotive materials has caused a great deal of obligation among automotive manufacturers to use natural fibres or green composites. Green composites or more commonly known as bio‐composites are made up of natural fibres. Natural fibres are used by humankind since prehistoric times. The natural fibre is obtained from plants as well as animals. Since the natural fibre is obtained from natural as well as biological resources, it is biodegradable and recyclable. This paper presents the study and analysis conducted to address the suitability of natural fibre in the automotive industry. This paper discusses the finite element analysis of four different natural fibre composites used for making car door panel, i.e., flax, jute, sisal, and leather are taken for the material study. This paper helps to find the effectiveness of each of the four natural fibre composites that have already been used in the automotive sector. This paper includes the analysis of four different natural fibres with and without the addition of the aluminium as the reinforcement material. This project revolves around the design of the composite fibre sheet and analysis of the mechanical parameters such as equivalent stress, shear stress, strain, deformation, and so on. The studies and observations of the analysis showed that the natural fibre with the aluminium reinforcement proved to be much stronger than that without the reinforcement. The results of finite element analysis showcased lowest total deformation and equivalent strain in the flax as 1.026 m and 0.017 mm/mm, respectively. However, sisal showed the lowest equivalent stress and shear stress which were 68.09 and 38.178 MPa, respectively. Additionally, leather showed the highest amount of stress, strain, and deformation, and hence leather was deemed to have undesirable properties regarding the usage in car door panels. All the materials except leather were found to be safe under the loading conditions. Hence, the flax fibre is recommended by the project to have superior properties compared to the other materials.
- RetractedOpen Access
- 1 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
[Retracted] Impact of Different Electrolytes on the Machining Rate in ECM Process
Electrochemical machining is a nonconventional machining process in which the metal removal is achieved by the electricity and chemical solution known as an electrolyte. It is the reverse electrolysis process where the application of electricity facilitates the current travel in between anode and cathode. The mechanism of the ion movement is similar to the electrolysis process. Electrochemical machining (ECM) is a type of advanced machining process which employs electricity to perform the machining process on the workpiece. It is also known as a reverse electroplating process where metal removal is achieved instead of metal deposition on the metal surface. There are various parameters that affect the metal removal process in the ECM process, such as electrolyte, power supply, workpiece material, and tool material. The electrolyte is one of the key factors impacting the machining rate, surface finish, and reliability of the produced parts. In this project, a brief study is carried out regarding the electrochemical process and the electrolytes where the properties, functions, merits, and demerits are evaluated. The impact of the various electrolytes and their suitability for machining of various metals is also discussed. The findings of the effect produced by using the mixture of the electrolyte in the electrochemical machining process are discussed in this project. The effects of the complexing agents on the electrolyte and the electrochemical process as a whole are also reviewed.
- 1 January 2021
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
RetractedOpen Access[Retracted] Impact of Different Electrolytes on the Machining Rate in ECM Process
Electrochemical machining is a nonconventional machining process in which the metal removal is achieved by the electricity and chemical solution known as an electrolyte. It is the reverse electrolysis process where the application of electricity facilitates the current travel in between anode and cathode. The mechanism of the ion movement is similar to the electrolysis process. Electrochemical machining (ECM) is a type of advanced machining process which employs electricity to perform the machining process on the workpiece. It is also known as a reverse electroplating process where metal removal is achieved instead of metal deposition on the metal surface. There are various parameters that affect the metal removal process in the ECM process, such as electrolyte, power supply, workpiece material, and tool material. The electrolyte is one of the key factors impacting the machining rate, surface finish, and reliability of the produced parts. In this project, a brief study is carried out regarding the electrochemical process and the electrolytes where the properties, functions, merits, and demerits are evaluated. The impact of the various electrolytes and their suitability for machining of various metals is also discussed. The findings of the effect produced by using the mixture of the electrolyte in the electrochemical machining process are discussed in this project. The effects of the complexing agents on the electrolyte and the electrochemical process as a whole are also reviewed.