YTYong Tang

Yong Tang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yong Tang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The application of the state-of-the-art turbulence models in the OpenFOAM CFD codes and the validation for different flow control cases in the continuous casting process

    by Yong Tang, Wolfgang Fellner, Gernot Lukesch, Gernot Hackl

    Computational fluid dynamics (CFD) is an established approach to study flow behaviour. Despite advances in mathematical numerical modelling in recent decades, accurately predicting the turbulent flow behaviour of steel using CFD remains a challenge. In the continuous casting process, two main flow control systems are employed to transfer liquid steel from the tundish to the mould, namely stopper control and slide gate control. In additional to these two main flow control systems, the casting nozzle geometries, casting rate, and casting mould dimensions vary considerably, and this complexity makes it difficult to precisely simulate turbulent flow in the casting channel. In this paper, examples are presented showing how different turbulence models influence the simulation results, using the latest version of the open source CFD simulation software OpenFOAM. Prior to the CFD modelling, RHI Magnesita's water modelling facilities in Leoben (Austria) were used to validate the state-of-the-art turbulence models selected for a particular casting nozzle geometry and flow control system.


  • Open Access

    Impact of Submerged Entry Nozzle (SEN) Immersion Depth on Meniscus Flow in Continuous Casting Mold under Electromagnetic Brake (EMBr)

    by Alexander Vakhrushev, Ebrahim Karimi-Sibaki, Jan Bohacek, Menghuai Wu, Andreas Ludwig, Yong Tang, Gernot Hackl, Gerald Nitzl, Josef Watzinger, Abdellah Kharicha

    Complex multi-phase phenomena, including turbulent flow, solidification, and magnetohydrodynamics (MHD) forces, occur during the continuous casting (CC) under the applied electromagnetic brake (EMBr). The results of the small-scale experiment of the liquid metal model for continuous casting (mini-LIMMCAST) at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR), investigating MHD flow with a deep immersion depth of 100 mm, are supplemented by newly presented numerical studies with the shallow position of the submerged entry nozzle (SEN) at 50 mm below the meniscus. Herein, the focus is on the MHD effects at the meniscus level considering (i) a fully insulating domain boundary, (ii) a perfectly conductive mold, or (iii) the presence of the solid shell. The volume-of-fluid (VOF) approach is utilized to model a Galinstan flow, including free surface behavior. A multiphase solver is developed using conservative MHD formulations in the framework of the open-source computational fluid dynamics (CFD) package OpenFOAM®. The wall-adapting local eddy-viscosity (WALE) subgrid-scale (SGS) model is employed to model the turbulent effects on the free surface flow. We found that, for the deep immersion depth, the meniscus remains calm under the EMBr for the conductive and semi-conductive domain. For the insulated mold disregarding the SEN position, the self-inducing MHD vortices, aligned with the magnetic field, cause strong waving of the meniscus and air bubble entrapment for shallow immersion depth. Secondary MHD structures can form close to the meniscus under specific conditions. The influence of the EMBr and immersion depth on the flow energy characteristics is analyzed using power spectral density (PSD).


  • Open Access

    Correction to: Norton-Hoff model for deformation of growing solid shell of thin slab casting in funnel-shape mold

    by Alexander Vakhrushev, Abdellah Kharicha, Menghuai Wu, Andreas Ludwig, Gerald Nitzl, Yong Tang, Gernot Hackl, Josef Watzinger, Christian M. G. Rodrigues


  • Open Access

    Norton-Hoff model for deformation of growing solid shell of thin slab casting in funnel-shape mold

    by Alexander Vakhrushev, Abdellah Kharicha, Menghuai Wu, Andreas Ludwig, Gerald Nitzl, Yong Tang, Gernot Hackl, Josef Watzinger, Christian M. G. Rodrigues

    A funnel-type mold is commonly used to provide necessary clearance for the submerged entry nozzle in the thin slab casting (TSC). The partially solidified shell is subjected to the mechanical deformations, which can lead to the defects formation and, as a results, to a breakout. Traditionally, the results of the flow simulation, performed by the finite volume method (FVM), are fed to the external package for the finite element analysis of stress and strain. A coupled model was assembled using “creeping solid” approach by blending the Norton-Hoff viscoplastic stress for the solidifying shell with the Newtonian viscous stress of the liquid melt. The FVM was used to combine both liquid and solid stress models within a single solver. The iterative procedure based on the improved both side diffusion method was introduced to treat the nonlinear relation between the viscoplastic stress and the strain rate. The modeled shell thickness was verified by previously published breakout measurements and the simulation results. Temperature distribution, obtained during the TSC simulation, dominantly corresponds to the viscoplastic range. Developed numerical approach is robust and has direct industrial application.


  • Open Access

    On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    by Alexander Vakhrushev, Abdellah Kharicha, Menghuai Wu, Andreas Ludwig, Yong Tang, Gernot Hackl, Gerald Nitzl, Josef Watzinger, Jan Bohacek

    Continuous casting (CC) is one of the most important processes of steel production; it features a high production rate and close to the net shape. The quality improvement of final CC products is an important goal of scientific research. One of the defining issues of this goal is the stability of the casting process. The clogging of submerged entry nozzles (SENs) typically results in asymmetric mold flow, uneven solidification, meniscus fluctuations, and possible slag entrapment. Analyses of retained SENs have evidenced the solidification of entrapped melt inside clog material. The experimental study of these phenomena has significant difficulties that make numerical simulation a perfect investigation tool. In the present study, verified 2D simulations were performed with an advanced multi-material model based on a newly presented single mesh approach for the liquid and solid regions. Implemented as an in-house code using the OpenFOAM finite volume method libraries, it aggregated the liquid melt flow, solidification of the steel, and heat transfer through the refractory SENs, copper mold plates, and the slag layer, including its convection. The introduced novel technique dynamically couples the momentum at the steel/slag interface without complex multi-phase interface tracking. The following scenarios were studied: (i) SEN with proper fiber insulation, (ii) partial damage of SEN insulation, and (iii) complete damage of SEN insulation. A uniform 12 mm clog layer with 45% entrapped liquid steel was additionally considered. The simulations showed that parasitic solidification occurred inside an SEN bore with partially or completely absent insulation. SEN clogging was found to promote the solidification of the entrapped melt; without SEN insulation, it could overgrow the clogged region. The jet flow was shown to be accelerated due to the combined effect of the clogging and parasitic solidification; simultaneously, the superheat transport was impaired inside the mold cavity.