Tomáš Funtík
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tomáš Funtík has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Ján Erdélyi
Department of Surveying, Faculty of Civil Engineering, Slovak University of Technology, 810 05 Bratislava, Slovakia
5 shared publications - Richard Honti
Department of Surveying, Faculty of Civil Engineering, Slovak University of Technology in Bratislava, Radlinskeho 11, 810 05 Bratislava, Slovakia
5 shared publications - Tomo Cerovšek
Faculty of Civil and Geodetic Engineering, University of Ljubljana, Jamova cesta 2, 1000 Ljubljana, Slovenia
4 shared publications - Pavol Mayer
Slovak University of Technology in Bratislava, Faculty of Civil Engineering, Radlinského 11, 81005 Bratislava, Slovakia
3 shared publications - Aleksandar Krleski
Faculty of Electrical Engineering and Information Technologies, “Ss. Cyril and Methodius” University in Skopje, Rugjer Bošković bb, P.O.Box 574, 1001 Skopje, Republic of North Macedonia
2 shared publications - Hristina Spasevska
Faculty of Electrical Engineering and Informational Technology, Ss. Cyril and Methodius University - Skopje
2 shared publications
Latest Publications
- 3 February 2026
- Published by Springer Nature
- p. 51-63
Evaluation of Apple’s LiDAR Sensor for Rapid Indoor 3D Capture
- 3 February 2026
- Published by Springer Nature
- p. 51-63
Evaluation of Apple’s LiDAR Sensor for Rapid Indoor 3D Capture
- 3 February 2026
- Published by Springer Nature
- p. 125-140
Building Information Modeling: A Case Study of the Natural History Museum in Bratislava
- 3 February 2026
- Published by Springer Nature
- p. 125-140
Building Information Modeling: A Case Study of the Natural History Museum in Bratislava
- Open Access
- 31 December 2024
- Published by Czech Journal of Civil Engineering in Czech Journal of Civil Engineering
- Vol. 10 (1) , 22-33
Enhancing BIM for more efficient energy performance calculations of buildings
Building Information Modeling (BIM) has the potential to revolutionize energy management by enabling stakeholders to analyze and optimize energy efficiency throughout the entire life cycle of a building—from initial design, through construction, to operation and maintenance (facility management). A BIM model serves as a foundational tool for decision-making processes, encompassing not only geometric data but also non-graphic information about the building's properties, systems, and environment. This rich data set facilitates various simulations and design optimizations, including those related to energy efficiency. For designers, BIM provides a powerful resource that aids in assessing measures by considering the characteristics of construction in relation to the future operation of the building. A significant advancement is the ability to conduct initial evaluations during the early stages of the project cycle, allowing for better-informed decisions and more effective planning right from the outset. Overall, the integration of BIM into energy management processes underscores its critical role in promoting sustainability and operational efficiency in building projects.
- 31 December 2024
- Published by Czech Journal of Civil Engineering in Czech Journal of Civil Engineering
- Vol. 10 (1) , 22-33
Open AccessEnhancing BIM for more efficient energy performance calculations of buildings
Building Information Modeling (BIM) has the potential to revolutionize energy management by enabling stakeholders to analyze and optimize energy efficiency throughout the entire life cycle of a building—from initial design, through construction, to operation and maintenance (facility management). A BIM model serves as a foundational tool for decision-making processes, encompassing not only geometric data but also non-graphic information about the building's properties, systems, and environment. This rich data set facilitates various simulations and design optimizations, including those related to energy efficiency. For designers, BIM provides a powerful resource that aids in assessing measures by considering the characteristics of construction in relation to the future operation of the building. A significant advancement is the ability to conduct initial evaluations during the early stages of the project cycle, allowing for better-informed decisions and more effective planning right from the outset. Overall, the integration of BIM into energy management processes underscores its critical role in promoting sustainability and operational efficiency in building projects.
- Open Access
The Status of Building Information Modeling Adoption in Slovakia
Building information modeling (BIM) is a key approach for the digitization of the sector. Therefore, states worldwide put BIM at the center of their construction digitalization strategies. However, strategies vary significantly, and so does BIM implementation and its adoption over time, thus making the comparison between countries considerably challenging. Therefore, the first part of this article provides a comprehensive review of available publications in the field of BIM adoption at the national and international level. BIM adoption in Slovakia is systematically analyzed based on an anonymous online BIM survey that focuses on various areas of BIM. The focus of the BIM survey was on the assessment of the readiness of experts who work with BIM methodology, their maturity, skillsets, and BIM adoption motivation, along with the means of communication and collaboration using Common Data Environment (CDE). Furthermore, we focused on the project management perspective, which covers the existence and compliance with BIM execution plan (BEP) evaluation. In the concluding part, requirements, barriers, and future developments are discussed in detail. The BIM survey provides an insight in the current state of the art of BIM in the industry that allows for a better understanding of its potential and a more informed development and implementation of BIM strategies. This study is an important contribution to BIM and digitalization benchmarking that provides valuable information to digitalization policy makers at the governmental and business levels.
Open AccessThe Status of Building Information Modeling Adoption in Slovakia
Building information modeling (BIM) is a key approach for the digitization of the sector. Therefore, states worldwide put BIM at the center of their construction digitalization strategies. However, strategies vary significantly, and so does BIM implementation and its adoption over time, thus making the comparison between countries considerably challenging. Therefore, the first part of this article provides a comprehensive review of available publications in the field of BIM adoption at the national and international level. BIM adoption in Slovakia is systematically analyzed based on an anonymous online BIM survey that focuses on various areas of BIM. The focus of the BIM survey was on the assessment of the readiness of experts who work with BIM methodology, their maturity, skillsets, and BIM adoption motivation, along with the means of communication and collaboration using Common Data Environment (CDE). Furthermore, we focused on the project management perspective, which covers the existence and compliance with BIM execution plan (BEP) evaluation. In the concluding part, requirements, barriers, and future developments are discussed in detail. The BIM survey provides an insight in the current state of the art of BIM in the industry that allows for a better understanding of its potential and a more informed development and implementation of BIM strategies. This study is an important contribution to BIM and digitalization benchmarking that provides valuable information to digitalization policy makers at the governmental and business levels.
- Open Access
- 30 June 2023
- Published by Czech Journal of Civil Engineering in Czech Journal of Civil Engineering
- Vol. 9 (1) , 23-34
Dátovo-orientovaný prístup na zníženie vlhkosti v pamiatkových budovách
Dnes sa v praxi používa viacero metód merania zameraných na identifikáciu úrovne vlhkosti stavebných konštrukcií. Namerané dáta je možné prepojiť s informačným modelom stavby, výsledkom čoho bude usporiadaná databáza, čo umožní nielen lepšie a komplexnejšie vyhodnocovanie, ale umožní automatizáciu vyhodnocovania s využitím umelej inteligencie. Problémom je najmä absencia informačných modelov stavby, ktoré obzvlášť pri historických objektoch nie sú k dispozícii. V tomto článku sa zameriavame na vytvorenie metodiky pre systematický zber údajov o vlhkostných pomeroch v konštrukciách pamiatkových objektov, ktorá bude podkladom pre návrh vhodných opatrení na úpravu. Prvým krokom je digitalizácia stavby prostredníctvom fotogrametrie, prípadne terestrického laserového skenovania. Druhým krokom je vytvorenie informačného modelu stavby. Posledným krokom je prepojenie informácií z merania s informačným modelom stavby. Obohatenie BIM o dátový súbor vlhkostných záznamov z rôznych budov môže výrazne prispieť lepšiemu pochopeniu miery zavlhnutia, identifikácii príčin a tiež napomôcť k výberu vhodných opatrení na základe navrhnutých opatrení v minulosti.
- 30 June 2023
- Published by Czech Journal of Civil Engineering in Czech Journal of Civil Engineering
- Vol. 9 (1) , 23-34
Open AccessDátovo-orientovaný prístup na zníženie vlhkosti v pamiatkových budovách
Dnes sa v praxi používa viacero metód merania zameraných na identifikáciu úrovne vlhkosti stavebných konštrukcií. Namerané dáta je možné prepojiť s informačným modelom stavby, výsledkom čoho bude usporiadaná databáza, čo umožní nielen lepšie a komplexnejšie vyhodnocovanie, ale umožní automatizáciu vyhodnocovania s využitím umelej inteligencie. Problémom je najmä absencia informačných modelov stavby, ktoré obzvlášť pri historických objektoch nie sú k dispozícii. V tomto článku sa zameriavame na vytvorenie metodiky pre systematický zber údajov o vlhkostných pomeroch v konštrukciách pamiatkových objektov, ktorá bude podkladom pre návrh vhodných opatrení na úpravu. Prvým krokom je digitalizácia stavby prostredníctvom fotogrametrie, prípadne terestrického laserového skenovania. Druhým krokom je vytvorenie informačného modelu stavby. Posledným krokom je prepojenie informácií z merania s informačným modelom stavby. Obohatenie BIM o dátový súbor vlhkostných záznamov z rôznych budov môže výrazne prispieť lepšiemu pochopeniu miery zavlhnutia, identifikácii príčin a tiež napomôcť k výberu vhodných opatrení na základe navrhnutých opatrení v minulosti.
- Open Access
- 31 December 2022
- Published by Czech Journal of Civil Engineering in Czech Journal of Civil Engineering
- Vol. 8 (2) , 42-53
VYUŽITIE BIM A CDE NA ZEFEKTÍVNENIE PROCESOV MANAŽMENTU KVALITY NA STAVBE
Complex quality management based on effective planning, execution and archiving of quality inspections of construction works, materials, products and structures is an essential prerequisite for high-quality execution of construction of the asset. Such management can be achieved by digitizing quality inspection plans, which are based on the principles and possibilities offered by Building Information Modeling (BIM) and Common Data Environment (CDE). This article describes the possibilities, procedures and results of creating quality inspection plans and forms in CDE systems based on BIM.
- 31 December 2022
- Published by Czech Journal of Civil Engineering in Czech Journal of Civil Engineering
- Vol. 8 (2) , 42-53
Open AccessVYUŽITIE BIM A CDE NA ZEFEKTÍVNENIE PROCESOV MANAŽMENTU KVALITY NA STAVBE
Complex quality management based on effective planning, execution and archiving of quality inspections of construction works, materials, products and structures is an essential prerequisite for high-quality execution of construction of the asset. Such management can be achieved by digitizing quality inspection plans, which are based on the principles and possibilities offered by Building Information Modeling (BIM) and Common Data Environment (CDE). This article describes the possibilities, procedures and results of creating quality inspection plans and forms in CDE systems based on BIM.
- Open Access
- 31 December 2022
- Published by Czech Journal of Civil Engineering in Czech Journal of Civil Engineering
- Vol. 8 (2) , 18-26
ANALYSIS OF BIM MANAGEMENT AND COORDINATION PROCESSES IN SLOVAKIA
Building Information Modeling (BIM) is one of the main tools of digitization and enables the achievement of higher process efficiency, introducing new procedures to which companies on the market must adapt. There is a need for new professions that will ensure correct procedures and control mechanisms within the scope of defining, executing, and handing over BIM projects. This article focuses on the analysis of the rate of BIM adoption in Slovakia, especially in the field of BIM management and coordination in order to monitor the situation regarding the operation of specialized positions such as BIM managers and coordinators, based on data from industry research performed in the form of anonymous on-line survey.
- 31 December 2022
- Published by Czech Journal of Civil Engineering in Czech Journal of Civil Engineering
- Vol. 8 (2) , 18-26
Open AccessANALYSIS OF BIM MANAGEMENT AND COORDINATION PROCESSES IN SLOVAKIA
Building Information Modeling (BIM) is one of the main tools of digitization and enables the achievement of higher process efficiency, introducing new procedures to which companies on the market must adapt. There is a need for new professions that will ensure correct procedures and control mechanisms within the scope of defining, executing, and handing over BIM projects. This article focuses on the analysis of the rate of BIM adoption in Slovakia, especially in the field of BIM management and coordination in order to monitor the situation regarding the operation of specialized positions such as BIM managers and coordinators, based on data from industry research performed in the form of anonymous on-line survey.
- Open Access
Verification of Building Structures Using Point Clouds and Building Information Models
The effort towards automation of the building industry processes has increased significantly over the last years worldwide. One of the key tools in this process is the modeling of buildings using Building Information Modeling (BIM). When following fundamental principles, a BIM model serves as an up-to-date pool of information. Combining the results of effective spatial data collection techniques with the information from a BIM model, it is possible to increase the effectiveness of as-built documentation of the structures or in-site clash detection between the built and planned parts. In this paper, we describe an approach for the verification of building structures by comparing the as-built model created from point clouds with the as-planned model of the building. The point clouds can be collected by laser scanning or photogrammetry, while the geometry of the planned (designed) structures is derived from the BIM model in the Industry Foundation Classes (IFC) format. The advantage of the approach is that the as-built model is created by regression models from point clouds preprocessed by detailed segmentation. The deviations from the design and the relative geometry (e.g., flatness) of the elements are expressed by signed color maps. The presented workflow enables semi-automated verification of building structures.
Open AccessVerification of Building Structures Using Point Clouds and Building Information Models
The effort towards automation of the building industry processes has increased significantly over the last years worldwide. One of the key tools in this process is the modeling of buildings using Building Information Modeling (BIM). When following fundamental principles, a BIM model serves as an up-to-date pool of information. Combining the results of effective spatial data collection techniques with the information from a BIM model, it is possible to increase the effectiveness of as-built documentation of the structures or in-site clash detection between the built and planned parts. In this paper, we describe an approach for the verification of building structures by comparing the as-built model created from point clouds with the as-planned model of the building. The point clouds can be collected by laser scanning or photogrammetry, while the geometry of the planned (designed) structures is derived from the BIM model in the Industry Foundation Classes (IFC) format. The advantage of the approach is that the as-built model is created by regression models from point clouds preprocessed by detailed segmentation. The deviations from the design and the relative geometry (e.g., flatness) of the elements are expressed by signed color maps. The presented workflow enables semi-automated verification of building structures.
- Open Access
BIM in the Center of Digital Transformation of the Construction Sector—The Status of BIM Adoption in North Macedonia
The building sector nowadays has come to the stage where it needs a “digital” renovation. This is to be accomplished by an introduction of change into the methodology of construction and using new tools and technologies, such as BIM technology. This paper gives an insight into the status of BIM adoption in North Macedonia. It presents the threefold actions toward introduction of BIM in the national construction industry. These actions refer to scanning the current situation regarding digitalization of the sector, then taking promotional actions to express the benefits of BIM, and finally identifying and proposing the most suitable measures, summarized in the proposal of the National Roadmap for BIM adoption. The methods used consist of a brief literature review of the global status of BIM development. Then, the results of a survey conducted on more than 300 respondents representing a sample of building professionals in the country are discussed, and the barriers for successful BIM adoption are accordingly identified. The next step is to showcase the potential benefits of BIM for assessment of energy performance of buildings. As a final point, the conclusions drafted toward identification of the most important challenges are addressed in the proposed National Roadmap for BIM adoption.
Open AccessBIM in the Center of Digital Transformation of the Construction Sector—The Status of BIM Adoption in North Macedonia
The building sector nowadays has come to the stage where it needs a “digital” renovation. This is to be accomplished by an introduction of change into the methodology of construction and using new tools and technologies, such as BIM technology. This paper gives an insight into the status of BIM adoption in North Macedonia. It presents the threefold actions toward introduction of BIM in the national construction industry. These actions refer to scanning the current situation regarding digitalization of the sector, then taking promotional actions to express the benefits of BIM, and finally identifying and proposing the most suitable measures, summarized in the proposal of the National Roadmap for BIM adoption. The methods used consist of a brief literature review of the global status of BIM development. Then, the results of a survey conducted on more than 300 respondents representing a sample of building professionals in the country are discussed, and the barriers for successful BIM adoption are accordingly identified. The next step is to showcase the potential benefits of BIM for assessment of energy performance of buildings. As a final point, the conclusions drafted toward identification of the most important challenges are addressed in the proposed National Roadmap for BIM adoption.
- Open Access
Assessing the Duration of the Lead Appointed Party Coordination Tasks and Evaluating the Appropriate Team Composition on BIM Projects
This paper addresses critical success factors for the delivery of BIM projects. The lack of experience with BIM projects on both the demand and supply side often leads to insufficient project teams, unsatisfied clients, schedule, and cost overruns. In order to better structure and control the information delivery in BIM projects requirements, planning and delivery must be standardized. The latter was achieved by EIR (Exchange Information Requirements), new BIM roles, BEP (BIM Execution Plan), and specified digital handover, which must be supported by a common data environment (CDE). This paper provides an analysis of the characteristics of BIM project delivery and duration in Architectural and Engineering companies in Slovakia. The analysis is based on the web survey of BIM managers and coordinators, which reveals that a significant amount of BIM project efforts must be executed by BIM specialists. The results also graphically depict the scope of critical BIM activities across project phases. The presented study is relevant for various project stakeholders and allows for a deeper understanding of the resources needed for the successful delivery of BIM projects in terms of adequate project team capacity, capability, organization, and planning.
Open AccessAssessing the Duration of the Lead Appointed Party Coordination Tasks and Evaluating the Appropriate Team Composition on BIM Projects
This paper addresses critical success factors for the delivery of BIM projects. The lack of experience with BIM projects on both the demand and supply side often leads to insufficient project teams, unsatisfied clients, schedule, and cost overruns. In order to better structure and control the information delivery in BIM projects requirements, planning and delivery must be standardized. The latter was achieved by EIR (Exchange Information Requirements), new BIM roles, BEP (BIM Execution Plan), and specified digital handover, which must be supported by a common data environment (CDE). This paper provides an analysis of the characteristics of BIM project delivery and duration in Architectural and Engineering companies in Slovakia. The analysis is based on the web survey of BIM managers and coordinators, which reveals that a significant amount of BIM project efforts must be executed by BIM specialists. The results also graphically depict the scope of critical BIM activities across project phases. The presented study is relevant for various project stakeholders and allows for a deeper understanding of the resources needed for the successful delivery of BIM projects in terms of adequate project team capacity, capability, organization, and planning.