WMWan Mazlina Wan Mohamed

Wan Mazlina Wan Mohamed

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wan Mazlina Wan Mohamed has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development and Validation of the Commuting Safety Management Coordinator Module

    by Mohd Hafzi Md Isa, Harun Bakar, Wan Mazlina Wan Mohamed, Mouloud Khelf

    The lack of commuting safety management at workplaces is a contributing factor to the increase in commuting accidents in Malaysia. Thus, this study aimed to develop and validate a Commuting Safety Management Coordinator module using the Design and Development Research (DDR) approach integrated with the Sidek Module Development Model (SMDM). The module, consisting of 11 units, was reviewed by 11 experts through a Focus Group Discussion (FGD) and achieved a content validity level of 87%, indicating strong content validity. The validated module supports organizations in enhancing commuting safety practices and warrants further research on module reliability and effectiveness.

  • Enhancing Green Sustainability Through Micromobility Implementation at UiTM Shah Alam

    by Khairunnisa Johar, Wan Mazlina Wan Mohamed, Ahmad Khushairy Makhtar, Nur Farizan Tarudin

  • Market Analysis on the Acceptance of Level 2 Automated Vehicles of Malaysian Public

    by Abdul Rahman Sulong, Shafiq Suhaimi, Wan Mazlina Wan Mohamed

    Level 2 Automatic Vehicles are vehicles that have been equipped with some technological equipment as an additional aid for more comfortable driving. Vehicles are categorized under Level 2 when it has more than one Advanced Driver Assistance System (ADAS). This study aims to measure the level of public acceptance of the use of level 2 automatic vehicles. This was done by conducting a questionnaire study which involved 86 respondents. The questionnaire was separated into four sections where, section A focused on the profile of the respondents, section B focused on the awareness factor, section C focused on the willingness of the respondent, and section D focused on the accessibility to facilities or infrastructure. The results have shown that the main factor for the acceptance of level 2 automatic vehicles was the awareness of the respondents towards the technology. This was followed by the accessibility to facilities and, willingness was shown to have the lowest rated factor. The result of this study reveals the main issues of the Malaysian public and can be used to shape policies that can lead to a broader adaptation of level 2 automated vehicles.

  • Effects of Passenger Capacity and Climate Control Settings on the Thermal Comfort Levels of Automated Rapid Transit (ART) System

    by Aina Balqis Azrin, Shafiq Suhaimi, Hazran Husain, Wan Mazlina Wan Mohamed

    Thermal comfort plays an important role in the quality of life of people especially for a hot and humid environment such as experience in Malaysia. This is issue is even more important for a small and tight conditions filled with crowded people like found in a public transportation setting. A well-designed climate control system will not only give comfort to the passengers of these public transportation system but also ensures their health and well-being. This study aims to investigate the effects of number of passengers and climate control settings on the thermal comfort of passengers in a new Automated Rapid Transit (ART) transit system. This is done by conducting a Computational Fluid Dynamics (CFD) simulation to simulate the heat dissipation and airflow inside of an ART carriage model. The inlet air velocity of the climate control system was set at blower level; level 2 (1.6 m/s), level 4 (2.9 m/s), and level 6 (3.2 m/s), the climate control temperature that were set at 14.7 °C and 8.7 °C, and the passenger capacity tested are; low capacity (16 passengers), nominal capacity (74 passengers), and maximum capacity (90 passengers). The thermal comfort of the passengers was measured by calculating the level of Predicted Mean Vote (PMV) and the Predicted Percentage Dissatisfied (PPD). According to ASHRAE Standard 55-2020, the permissible PPD level must fall within -0.5 to +0.5 for the climate to be considered comfortable. Form the results, it was found that the combination of level 4 air velocity and 8.7 °C thermal settings has is the optimal setting for nominal and maximum passenger capacity. However, there are no combinations that resulted in zero passenger discomfort since all results shows that there are passengers in the corners or standing in the centre that falls too high or too low on the comfort scale. This is due to the air outlet conditions and passenger seating layout. The results from this study shows the relations between passenger capacity and thermal comfort and the data collected can be used for carriage design for maximum thermal comfort.

  • Open Access

    Enhancing Precision: Leveraging Diverse Acquisition Functions in Dynamic Data Segmentation Using GPR-KNN Approach for Improved Nominal Current Forecasting

    by W. M. R. Jamaludin, W. M. Wan Mohamed, N. H. Nik Ali

    JAIT is a scientific open access journal which focuses on empirical research results and critical analysis of technology development, use, management and impacts in information technology.

  • Open Access

    COMPARATIVE STUDY ON URBAN TRANSPORT AND THE ENVIRONMENT (CUTE) FRAMEWORK AS STRATEGY FOR THE REDUCTION OF CARBON DIOXIDE EMISSIONS OF ROAD VEHICLES AT ZAPOTE STREET

    by Joanna Marie L. Acierto, Susane Marie H. Quilla, Bobby Joel N. Valencia, Geoffrey L. Cueto, Cris Edward F. Monjardin, Wan Mazlina Wan Mohamed

    Carbon emissions from vehicles contribute significantly to carbon footprint production, which is one of the primary causes of climate change. In Caloocan City, increasing air pollution is observed despite the drastic decrease in air pollutants in major Metro Manila cities. This study primarily aims to provide strategies to reduce carbon dioxide emissions in Zapote St., Caloocan City, through a Comparative study on Urban Transport and the Environment (CUTE) Framework. The study identified that the hourly average carbon footprint contributed by private and public vehicles along Zapote Street is 686.27 and 243.71 kg CO2e on weekdays and 634.65 and 212.97 kg CO2e on weekends. The exploratory data analysis via Python shows that only the vehicle and fuel types affect the emissions volume. Accordingly, the Unified Vehicular Volume Reduction Program (UVVRP) was ineffective. It only resulted in additional private vehicles and increased congestion, indicating the need for an improved public transport system to encourage Filipinos to shift to public transport. Furthermore, the Traffic Volume Emission Projection (TVEP) model projects a decrease of 87.19 kg CO2e per hour in 2023 and 164.72 kg CO2e per hour by 2052, resulting from the 20% reduction in volume upon the implementation of the "no exemption of motorcycles" in the number coding scheme of Caloocan city.


  • Open Access

    The Aerodynamic Characteristics Investigation on NACA 0012 Airfoil with Owl’s Wing Serrations for Future Air Vehicle

    by Muhammad Ridzwan Ramli, Wan Mazlina Wan Mohamed, Hamid Yusoff, Mohd Azmi Ismail, Ahmed Awaludeen Mansor, Azmi Hussin, Aliff Farhan Mohd Yamin

    Owls have an incredibly unique ability to fly in silence, and this ability has significant potential to reduce noise pollution from aircraft engines. For decades, researchers have been studying the noise abatement system in conventional aircraft, but only a few of them had looked into the owl’s ability to reduce the aircraft noise level, especially on the serrated wing. The present study aims to investigate the lift and drag coefficient of the serrated wings including leading-edge serrations, trailing-edge serrations, both-edge serrations, and the original/baseline wing model from the NACA 0012 airfoil. The experimental testing was performed in a wind tunnel at Reynolds numbers of 20,000 and 40,000 and angle of attack from 2° to 30°, in 2° angle intervals. In general, the results showed that each wing model produced a similar lift and drag coefficient profiles, which were proportional to the angle of attack. At Reynolds number of 40,000, the lift coefficient increases from 0.45 to 1.5, as the angle of attack increases from 2° to 24°. Afterward, it decreased as the angle of attack exceeded 24°. According to the data, the trailing-edge serrations model showed the lowest drag coefficient at a Reynolds number of 40,000. Meanwhile, the highest lift coefficient at Reynolds number of 40,000 had been produced by the baseline wing model. This result is beneficial in reducing the noise generation produced by wing structure and at the same time enhancing aerodynamic efficiency.


  • Open Access

    The Evolution of Induced Drag of Multi-Winglets for Aerodynamic Performance of NACA23015

    by Hamid Yusoff, Koay Mei Hyie, Halim Ghaffar, Aliff Farhan Mohd Yamin, Muhammad Ridzwan Ramli, Wan Mazlina Wan Mohamed, Siti Nur Amalina Mohd Halidi

    Eagle is one of the most manoeuvrable and aerodynamically efficient bird capable of soaring for a mile, and it has high gliding ratio that can reach high velocities. Unmanned Aerial Vehicles () used in military and civilian applications are required to loiter at significant altitude without being targeted by observers. However, the induced drag is usually held mainly at the wingtip, which affects the performance of the in steady state condition due to wingtip vortex. Therefore, the objectives of this paper are to study the effect of multi-winglet on different configurations in the performance of lift and drag coefficients and to analyse the flow pattern of multi-winglet with difference configurations. The wing airfoil used was with chord length of and wingspan of . The multi-winglet device was simulated using software with three, five and seven multi-winglet configurations at angles of attack between -5° to 20° (with increment of 5°) and at flying speed of . This study found that seven multi-winglets demonstrated better results in lift and drag coefficients compared to other models at low angles of attack. In conclusion, multi-winglets can improve the aerodynamic performance of airfoil in reducing the induced drag and increasing the lift coefficient, which is suitable to be implemented at low angles of attack due to the bluffing body of winglet at high angles of attack.


  • Open Access

    The Optimisation of Aerodynamic Performance Enhancement of a Flapping Wing using Response Surface Methodology

    by Hamid Yusoff, Aliff Farhan Mohd Yamin, Siti Nur Amalina Mohd Halidi, Nor Suhada Abdullah, Halim Ghafar, Shafiq Suhaimi, Koay Mei Hyie, Wan Mazlina Wan Mohamed

    Flapping-Wing Micro Air Vehicles (FW-MAVs) are small hand-held flying vehicles that can manoeuvre in constrained space owing to their lightweight, low aspect ratio and can fly in a low Reynolds number environment. Among all wing types, flapping wings have the most potential in fulfilling this flight requirement since it offers good agility in confined spaces. However, the design problem for the flapping wings lies in lift generation and figuring out the main factors that play the biggest role in generating lift. In the present work, the effects of design parameters such as camber, velocity and frequency of the flapping wing have been investigated using the response surface methodology (RSM). The standard quadratic model of RSM called Central Composite Design (CCD) was utilized to identify and optimize the flapping wing. The experimental results were found to be in good agreement with the predicted outcomes. Out of 20 experimental trials determined by CCD, the optimum camber, velocity, and frequency were found to be 15%, 4.29 m/s and 9 Hz respectively. The experimental results in this study are reasonable and accurate and can be used for describing the aerodynamic parameters. This study also established the usefulness of RSM in optimizing the aerodynamic properties for flapping wing mechanism.