PGPavlo Gultsov

Pavlo Gultsov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pavlo Gultsov has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Simulation modeling of artillery systems for improving game simulators. From theory to practice

    by Maksym Maksymov, Pavlo Gultsov, Oleksandr Toshev, Ruslan Riaboshapka, Volodymyr Demydenko, Valentin Davydov, Olexander Brunetkin, Oleksandr Sidelnykov, Oksana Maksymova, Yevhenii Dobrynin, et al.

    At the present stage of development of computer simulation of military processes, the problem lies not only in obtaining a visually convincing picture of combat actions, but in reproducing their internal logic in such a way that the modelled process resembles a real one not externally only, but by its sequence, interrelations, dependencies, and consequences. This is especially true in relation to artillery systems. In many modern simulators and computer gaming products, one can observe sufficiently advanced visualization, dynamic effects, and a high degree of graphical realism, while the functioning of artillery means itself is often presented in a simplified form, where separate stages are shown, but not united into one logically complete cycle. Because of this, the issue arises of creating such generalized simulation approaches that would make it possible to reproduce the operation of artillery means not as a set of disconnected effects, but as a full process beginning with the choice of a target and continuing through preparation, aiming, firing, flight, influence of disturbances, target hit, and final action of ammunition. This book is devoted exactly to such an approach. Its main idea is to consider artillery functioning in a simulation environment as a complete and internally connected cycle, where every stage has its own logic, its own modelling task, and at the same time forms part of the common system. For this reason, the book consistently addresses trajectory formation, sensor and perception issues, accuracy and randomness, the influence of stochastic disturbances, reaction to changing conditions, and the role of all these factors in forming realistic behaviour of artillery means in a simulator. The importance of such an approach lies in the fact that it allows moving away from purely illustrative reproduction of fire action and toward a more physically and logically grounded simulation, where the visible result becomes only the outer manifestation of deeper modelled processes. A significant feature of the presented material is that the proposed models are generalized and do not include any actual secret tactical or technical characteristics. They were created not for the disclosure of real data, but for the formation of a methodological basis that can be used in educational systems, training environments, computer simulators, and computer gaming. This makes it possible to combine scientific correctness, practical applicability, and safety of use. At the same time, the book is connected not only with simulation itself, but also with automation, computer-integrated technologies, decision support, and operations research, because artillery action is treated here as a complex controlled process influenced by many interrelated factors, including uncertainty, timing, observation, reaction, and probability of result. Thus, the book offers the reader not a fragmented set of separate models, but a holistic view of artillery simulation as a field where mathematical modelling, stochastic methods, ballistic logic, sensor representation, and decision-making principles are combined into one framework. Precisely because of this, the presented material may be useful both for developers of realistic military simulators and gaming products, and for engineers, researchers, cadets, officers, and all those who are interested in creating more realistic and scientifically grounded models of artillery processes.

  • Open Access

    Current state of automated control systems for field artillery combat employment in condition diagnostics

    by Maksym Maksymov, Pavlo Gultsov, Oleksandr Toshev, Ruslan Riaboshapka

    This chapter provides a comprehensive overview of automated artillery command and control systems (ACS) for field artillery at the tactical level, emphasizing their role in condition diagnostics and adaptive fire management. The theoretical foundations of information and control systems are analyzed, including mathematical modeling, algorithmization of military tasks, and integration of hardware-software components. International experience in the design and implementation of field artillery ACS, including systems such as TACFIRE (Tactical Fire Direction System) (USA), ADLER (Artillery Data, Location and Evaluation/Reconnaissance system) (Germany), and BATES (Battlefield Artillery Target Engagement System) (UK), is examined. Special attention is given to the structure, functionality, and performance metrics of ACS, highlighting the importance of real-time verification of the artillery firing cycle, Multiple Round Simultaneous Impact (MRSI), and “shoot and scoot” tactics. The chapter also discusses the principles of modern information and communication infrastructure, operational efficiency, and resilience of ACS under complex combat conditions, providing a methodological basis for future development of high-performance automated artillery systems.

  • Open Access

    Model of free carbon formation when firing an artillery piece

    by Olexander Brunetkin, Pavlo Gultsov, Oleksandr Sidelnykov

    A phenomenon present in almost every shot, yet rarely addressed or explained in the literature, has been identified. It manifests itself in the muzzle discharge in the form of a certain volume of soot. The Boudouard thermochemical reaction (also referred to in some sources as the Boudouard–Bell reaction carbon monoxide disproportionation), which accounts for soot formation in propellant gases during firing, has been identified. The conditions under which this reaction can occur are discussed. A distinctive feature of this reaction is the formation of a condensed carbon phase during the firing process after gasification of the propellant charge. Based on the physicochemical processes governing the expansion of propellant gases in the gun barrel, a mathematical model is proposed that makes it possible to estimate the temperature distribution during firing. The initial model is constructed using generally accepted assumptions. The modeling results obtained on its basis can therefore only be regarded as approximate. For this reason, the method relies on simple calculations, making it unnecessary to employ high-performance computing equipment. A simulation of the temperature distribution of propellant gases along the barrel, between the chamber and the moving projectile, was carried out using a model system similar to the 2A38 artillery system. The possibility of varying the extent of the Boudouard–Bell reaction zone (the soot formation zone) depending on the initial parameters is demonstrated. The use of both fresh and degraded propellant charges was modeled. Full and reduced charges were considered. The simulation results reveal the cause of possible initiation of a secondary muzzle flash, both from the frontal side and from the side of the muzzle brake.

  • Open Access

    Methods for determining the states of an artillery gun under dynamic disturbances

    by Oksana Maksymova, Pavlo Gultsov, Volodymyr Demydenko, Yevhenii Dobrynin, Valentin Davydov

    This chapter develops a comprehensive model for assessing the technical condition and combat capabilities of a self-propelled artillery system (SPAS) considered as a complex dynamic object operating under conditions of cumulative wear and exposure to external combat factors. An approach to formalizing the system state is proposed, based on the integration of acoustic, visual, thermodynamic, and mechanical parameters with the construction of a generalized system of serviceability criteria. Mathematical models are developed to describe the acoustic field of a shot, the processes of formation and evolution of the muzzle discharge, as well as methods for evaluating barrel stability with account taken of thermal and mechanical wear factors. An information model of artillery barrel operation is formulated, incorporating multivector serviceability conditions and enabling automation of residual life calculations. A state tree of the system is constructed for rank-based assessment of the current technical condition, and combat capability criteria are integrated into a unified decision-making model using the ideal point method. An analytical relationship is derived to determine the required number of rounds to engage a target with a specified probability, together with a time-based model for evaluating mission execution that considers a window of particular vulnerability and maneuverability constraints. Computational examples demonstrate the practical implementation of the proposed approach and its applicability to assessing the risk of system loss and substantiating the advisability of opening fire. The results establish a methodological foundation for further automation of condition monitoring of artillery systems and may be employed as an algorithmic module within decision-support systems for combat employment.

  • Open Access

    Method of parabolic approximation for determining the impact point coordinates of an artillery projectile

    by Pavlo Gultsov, Viktor Boltenkov, Yevhenii Dobrynin, Oleksii Maksymov

    This section considers a method for verifying an artillery shot under conditions of random disturbances, which is based on the registration of acoustic fields formed by ballistic and muzzle waves. The position of the proposed approach among modern technologies for ensuring the accuracy of artillery fire is demonstrated, and the feasibility of using the ballistic wave as a source of useful information for estimating projectile flight parameters is substantiated. A general description of the method, the layout of the measuring equipment, and the sequence of measurement data processing are presented. The method is based on recording the moments when the projectile passes over spatially separated observation points, followed by approximation of the flight trajectory using a system of parabolas. The proposed algorithm takes into account possible changes in the relative positions of the measurement points with respect to the ascending and descending branches of the trajectory, which makes it possible to partially compensate for random disturbances caused by instability of the initial velocity and other firing-related factors. The effectiveness of the method is investigated by means of simulation modeling for a large-caliber artillery projectile, taking into account random disturbances of temporal parameters. It is shown that the use of a system of approximating parabolas provides estimation of the projectile impact point coordinates with an error on the order of fractions of a percent of the firing range. A comparative analysis with the traditional method of compensating random disturbances by successive corrective shots is carried out, and the results of a field experiment involving the registration of ballistic wave signals are presented. The obtained results confirm the fundamental possibility of verifying an artillery shot using a single firing with acceptable accuracy.

  • Open Access

    Information localization and verification of the firing states of an artillery gun

    by Maksym Maksymov, Pavlo Gultsov, Volodymyr Demydenko, Valentin Davydov

    This chapter investigates the problem of informational localization and verification of the states that characterize the lifecycle of an individual artillery shot. The study considers the sequential chain of physical processes occurring in the system propellant charge – chamber – barrel – projectile – flight trajectory – impact with the surface. These processes form the basis for assessing the technical condition and operational efficiency of artillery systems. A conceptual framework is developed for identifying measurable parameters associated with different stages of the shot process. The approach relies on the analysis of acoustic, thermodynamic, and optoelectronic phenomena accompanying the firing event. Particular attention is given to the diagnostic potential of the acoustic field generated by ballistic and muzzle waves. A method for verifying the heat of explosion of the propellant charge is proposed. The method is based on determining the gross chemical formula of the propellant gases and performing a thermodynamic evaluation of the energy characteristics of the charge. This approach enables verification of the declared energetic parameters of propellant compositions. An acoustic method for estimating the initial velocity of the projectile is presented. The method utilizes temporal characteristics of ballistic and muzzle waves recorded at remote measurement points and allows indirect assessment of the wear state of the barrel and chamber. The chapter also introduces a method for evaluating the energetic efficiency of an artillery gun based on video‑metric observation of projectile exit and the expansion of propellant gases. In addition, a technique for verifying the coordinates of projectile impact is proposed using acoustic measurements of the shot-generated wave field along the projectile trajectory. The presented models and methods provide a basis for partial verification of different stages of the artillery shot process and may serve as elements of integrated automated systems for monitoring the technical condition and operational parameters of artillery weapons.

  • Open Access

    Improving methods and models for artillery combat control

    by Pavlo Gultsov, Oksana Maksymova, Yevhenii Dobrynin

    This chapter deals with methodological approaches to estimating the effectiveness of the combat employment of artillery units considering minimization of the loss of combat capability. The definition of combat capability is proposed, which is seen as the ability of a unit to perform assigned tasks under specified operating and external conditions. The influence of external factors and loads on the state of the unit and on the intensity of failure of its elements is analyzed. A stochastic model of the combat operation of an artillery battery is presented. The model is based on a discrete Markov chain structure which allows to estimate time and dynamic characteristics, including the recovery rate, the probability of destructing a target and the average firing time. Criteria for an effective shot are defined. The use of a combined criterion to estimate combat effectiveness is justified. The proposed approaches provide a scientific basis to predict combat capability, optimize control processes and decision-making in automated systems for estimating artillery fire effectiveness. Simulation results demonstrate that the proposed approach allows maintaining the combat capability at a level of 0.78–0.81 for a 10-shot mission, while the ratio between optimal and worst mission structures reaches values from 4 to 10.

  • Open Access

    МЕТОД ВЕРИФІКАЦІЇ АРТИЛЕРІЙСЬКОГО ВИСТРІЛУ ПІД ЧАС ВПЛИВУ ВИПАДКОВИХ ЗБУРЕНЬ

    by М. В. Максимов, П. С. Гульцов, В. О. Болтьонков, О. М. Максимов

    В артилерійському пострілі завжди присутні випадкові збурення. Ці збурення не можна усунути в процесі підготовки стрільби. Традиційно вони компенсуються шляхом послідовної пристрілки. Сучасна тактика контр-батарейної боротьби потребує максимального скорочення часу вогневого прояву артилерійського підрозділу. Лише така тактика дає змогу зберегти боєздатність та саме існування артилерійського підрозділу. У цьому плані дуже актуальні методи верифікації кожного артилерійського пострілу. Під верифікацією розуміється підтвердження ефективності пострілу одразу після його здійснення. Верифікація як оцінка помилки координат розриву снаряда може здійснюватися із застосуванням засобів оптичного чи радіолокаційного спостереження або систем звукової розвідки. Однак застосування додаткових засобів не завжди можливе та ефективне. У цьому плані перспективними є методи верифікації, засновані на аналізі акустичних полів, що виникають під час пострілу. Для такого аналізу використовуються прогресивні інформаційні технології. Запропоновано метод верифікації пострілу з реєстрацією балістичної хвилі, що створюється снарядом, який летить по балістичній траєкторії з надзвуковою швидкістю. Сигнал балістичної хвилі реєструється розподіленою системою акустичних сенсорів, що розташовані на лінії стрільби. На підставі зареєстрованих сенсорами моментів приходу балістичної хвилі будується система апроксимуючих парабол. Рішення системи дає змогу визначити очікувану точку розриву снаряда ще до його приземлення. Оцінкою відхилення точки розриву від точки прицілювання верифікується якість артилерійського пострілу. Проведено імітаційне моделювання запропонованого методу. Продемонстровано, що параболічна апроксимація дає змогу ефективно компенсувати випадкові збурення пострілу. Проведено порівняння запропонованого методу з методом компенсації збурень шляхом послідовного пристрілювання. Показано, що запропонований метод дає змогу істотно скоротити час вогневого прояву гармати та витрати снарядів на поразку цілі. Працездатність методу верифікації підтверджена натурною польовою перевіркою.


  • Open Access

    Devising a method for improving the efficiency of artillery shooting based on the Markov model

    by Viktor Boltenkov, Olexander Brunetkin, Yevhenii Dobrynin, Oksana Maksymova, Vitalii Kuzmenko, Pavlo Gultsov, Volodymyr Demydenko, Olha Soloviova

    This paper reports a method for improving the firing efficiency of an artillery unit that results in enhanced effectiveness. Given the modern use of artillery for counter-battery warfare, the effectiveness of shooting is not enough assessed by accuracy only. It is also necessary to take into consideration and minimize the time spent by the unit in the firing position and the consumption of shells to hit the target. It has been shown that in order to assess the effectiveness of an artillery shot due to the initial velocity of the projectile, the most rapid and simple means is to classify the quality of the shot by the acoustic field. A procedure for categorizing the shot has been improved by applying an automatic classifier with training based on a machine of support vectors with the least squares. It is established that the error in the classification of the effectiveness of the second shot does not exceed 0.05. The concept of the effectiveness of a single artillery shot was introduced. Under the conditions of intense shooting, there may be accidental disturbances in each shot due to the wear of the charging chamber of the gun, its barrel, and incomplete information about the powder charge. When firing involves disturbances, the firing of an artillery unit can be described by a model of a discrete Markov chain. Based on the Markov model, a method for improving the efficiency of artillery fire has been devised. The method is based on the identification of guns that produce ineffective shots. The fire control phase of the unit has been introduced. In the process of controlling the fire of the unit, such guns are excluded from further firing. A generalized criterion for the effectiveness of artillery firing of a unit, based on the convolution of criteria, has been introduced. It is shown that the devised method significantly improves the effectiveness of shooting according to the generalized criterion.


  • Open Access

    Development of the model and the method for determining the influence of the temperature of gunpowder gases in the gun barrel for explaining visualize of free carbon at shot

    by Olexander Brunetkin, Maksym Maksymov, Vladimir Brunetkin, Оleksii Maksymov, Yevhenii Dobrynin, Vitalii Kuzmenko, Pavlo Gultsov

    A phenomenon that is present in almost every shot is highlighted. It manifests itself in the muzzle discharge as a certain amount of free carbon. The thermochemical reaction of Boudouard-Bell (disproportionation of carbon monoxide) was determined, which explains the formation of free carbon in the gunpowder gases during the firing process. A feature of this reaction is the formation of a condensed phase of carbon during the firing process after the gasification of the gunpowder charge. The reason is revealed that does not allow describing the formation of free carbon during firing on the basis of existing models of internal ballistics processes. It is the lack of taking into account the temperature distribution of the gunpowder gases along the length of the gun barrel and its change. A mathematical model is proposed that makes it possible to estimate the temperature distribution during the shot. A method has been developed for solving the problem of internal ballistics with the ability to determine the temperature of gunpowder gases along the length of the gun barrel at different times and at different positions of the projectile in the barrel. The original model is built using generally accepted assumptions. Modeling results can only be estimated. For this reason, the method is based on simple calculations, which makes it possible not to involve high-power computing equipment. The modeling of the temperature distribution of gunpowder gases in the space of the gun barrel between the charging ball and the moving projectile in the model system is carried out. The possibility of changing the length of the zone of the Boudouard-Bell reaction (the zone of formation of free carbon) depending on the initial data is shown. The use of a fresh gunpowder charge and a degraded one is simulated. Full and reduced charges are considered. The simulation results showed the reason for the possibility of initiating a secondary muzzle discharge flash both from the front side and from the side of the muzzle brake.