Oksana Maksymova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oksana Maksymova has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Yevhenii Dobrynin
Naval Institute of the National University "Odessa Maritime Academy
5 shared publications - Kristina Zhanko
Department of Software and Computer-Integrated Technologies «Odessа Polytechnic State University», Odesa, Ukraine
4 shared publications - Oleksandr Sidelnykov
Odesа Polytechnic National University
4 shared publications - Pavlo Gultsov
Odesa Polytechnic National University
4 shared publications M. Maksymov
Odesа Polytechnic National University
3 shared publicationsMaksym Maksymov
Odessa National Polytechnic University Shevchenka ave., 1, Odessa, Ukraine, 65044
3 shared publications
Latest Publications
- Open Access
- 10 June 2026
- Published by OU Scientific Route
Simulation modeling of artillery systems for improving game simulators. From theory to practice
At the present stage of development of computer simulation of military processes, the problem lies not only in obtaining a visually convincing picture of combat actions, but in reproducing their internal logic in such a way that the modelled process resembles a real one not externally only, but by its sequence, interrelations, dependencies, and consequences. This is especially true in relation to artillery systems. In many modern simulators and computer gaming products, one can observe sufficiently advanced visualization, dynamic effects, and a high degree of graphical realism, while the functioning of artillery means itself is often presented in a simplified form, where separate stages are shown, but not united into one logically complete cycle. Because of this, the issue arises of creating such generalized simulation approaches that would make it possible to reproduce the operation of artillery means not as a set of disconnected effects, but as a full process beginning with the choice of a target and continuing through preparation, aiming, firing, flight, influence of disturbances, target hit, and final action of ammunition. This book is devoted exactly to such an approach. Its main idea is to consider artillery functioning in a simulation environment as a complete and internally connected cycle, where every stage has its own logic, its own modelling task, and at the same time forms part of the common system. For this reason, the book consistently addresses trajectory formation, sensor and perception issues, accuracy and randomness, the influence of stochastic disturbances, reaction to changing conditions, and the role of all these factors in forming realistic behaviour of artillery means in a simulator. The importance of such an approach lies in the fact that it allows moving away from purely illustrative reproduction of fire action and toward a more physically and logically grounded simulation, where the visible result becomes only the outer manifestation of deeper modelled processes. A significant feature of the presented material is that the proposed models are generalized and do not include any actual secret tactical or technical characteristics. They were created not for the disclosure of real data, but for the formation of a methodological basis that can be used in educational systems, training environments, computer simulators, and computer gaming. This makes it possible to combine scientific correctness, practical applicability, and safety of use. At the same time, the book is connected not only with simulation itself, but also with automation, computer-integrated technologies, decision support, and operations research, because artillery action is treated here as a complex controlled process influenced by many interrelated factors, including uncertainty, timing, observation, reaction, and probability of result. Thus, the book offers the reader not a fragmented set of separate models, but a holistic view of artillery simulation as a field where mathematical modelling, stochastic methods, ballistic logic, sensor representation, and decision-making principles are combined into one framework. Precisely because of this, the presented material may be useful both for developers of realistic military simulators and gaming products, and for engineers, researchers, cadets, officers, and all those who are interested in creating more realistic and scientifically grounded models of artillery processes.
- 10 June 2026
- Published by OU Scientific Route
Open AccessSimulation modeling of artillery systems for improving game simulators. From theory to practice
At the present stage of development of computer simulation of military processes, the problem lies not only in obtaining a visually convincing picture of combat actions, but in reproducing their internal logic in such a way that the modelled process resembles a real one not externally only, but by its sequence, interrelations, dependencies, and consequences. This is especially true in relation to artillery systems. In many modern simulators and computer gaming products, one can observe sufficiently advanced visualization, dynamic effects, and a high degree of graphical realism, while the functioning of artillery means itself is often presented in a simplified form, where separate stages are shown, but not united into one logically complete cycle. Because of this, the issue arises of creating such generalized simulation approaches that would make it possible to reproduce the operation of artillery means not as a set of disconnected effects, but as a full process beginning with the choice of a target and continuing through preparation, aiming, firing, flight, influence of disturbances, target hit, and final action of ammunition. This book is devoted exactly to such an approach. Its main idea is to consider artillery functioning in a simulation environment as a complete and internally connected cycle, where every stage has its own logic, its own modelling task, and at the same time forms part of the common system. For this reason, the book consistently addresses trajectory formation, sensor and perception issues, accuracy and randomness, the influence of stochastic disturbances, reaction to changing conditions, and the role of all these factors in forming realistic behaviour of artillery means in a simulator. The importance of such an approach lies in the fact that it allows moving away from purely illustrative reproduction of fire action and toward a more physically and logically grounded simulation, where the visible result becomes only the outer manifestation of deeper modelled processes. A significant feature of the presented material is that the proposed models are generalized and do not include any actual secret tactical or technical characteristics. They were created not for the disclosure of real data, but for the formation of a methodological basis that can be used in educational systems, training environments, computer simulators, and computer gaming. This makes it possible to combine scientific correctness, practical applicability, and safety of use. At the same time, the book is connected not only with simulation itself, but also with automation, computer-integrated technologies, decision support, and operations research, because artillery action is treated here as a complex controlled process influenced by many interrelated factors, including uncertainty, timing, observation, reaction, and probability of result. Thus, the book offers the reader not a fragmented set of separate models, but a holistic view of artillery simulation as a field where mathematical modelling, stochastic methods, ballistic logic, sensor representation, and decision-making principles are combined into one framework. Precisely because of this, the presented material may be useful both for developers of realistic military simulators and gaming products, and for engineers, researchers, cadets, officers, and all those who are interested in creating more realistic and scientifically grounded models of artillery processes.
- 17 January 2026
- Published by Springer Nature
- p. 185-195
Mathematical Modeling of Mine Barrier Stability for Countering Landing Operations
- 17 January 2026
- Published by Springer Nature
- p. 185-195
Mathematical Modeling of Mine Barrier Stability for Countering Landing Operations
- Open Access
- 1 January 2026
- Published by OU Scientific Route
- p. 117-142
Methods for rapid determination of the composition and condition of nitrocellulose propellants based on thermodynamic modeling
A method for rapid verification of the composition and energetic characteristics of nitrocellulose propellants is presented. It is based on a library approach to solving direct and inverse problems of thermal decomposition modeling. The library method forms a multidimensional array of solutions by varying elemental composition, enthalpy, and combustion conditions. This approach allows efficient determination of propellant composition from measurable parameters, primarily the temperature and combustion conditions of the reaction products, even in ill-conditioned inverse problems. An algorithm for encoding initial parameters and a procedure for successive data reduction ensure unambiguous reconstruction of the composition. Special attention is given to modeling combustion in closed volumes, selecting real-gas equations of state, accounting for pressure effects, chemical equilibrium, and possible formation of condensed phases. The results provide a theoretical and methodological basis for practical tools to rapidly assess propellant condition and refine internal ballistics parameters under limited information.
- 1 January 2026
- Published by OU Scientific Route
- p. 117-142
Open AccessMethods for rapid determination of the composition and condition of nitrocellulose propellants based on thermodynamic modeling
A method for rapid verification of the composition and energetic characteristics of nitrocellulose propellants is presented. It is based on a library approach to solving direct and inverse problems of thermal decomposition modeling. The library method forms a multidimensional array of solutions by varying elemental composition, enthalpy, and combustion conditions. This approach allows efficient determination of propellant composition from measurable parameters, primarily the temperature and combustion conditions of the reaction products, even in ill-conditioned inverse problems. An algorithm for encoding initial parameters and a procedure for successive data reduction ensure unambiguous reconstruction of the composition. Special attention is given to modeling combustion in closed volumes, selecting real-gas equations of state, accounting for pressure effects, chemical equilibrium, and possible formation of condensed phases. The results provide a theoretical and methodological basis for practical tools to rapidly assess propellant condition and refine internal ballistics parameters under limited information.
- Open Access
- 1 January 2026
- Published by OU Scientific Route
- p. 89-116
Methods for determining the states of an artillery gun under dynamic disturbances
This chapter develops a comprehensive model for assessing the technical condition and combat capabilities of a self-propelled artillery system (SPAS) considered as a complex dynamic object operating under conditions of cumulative wear and exposure to external combat factors. An approach to formalizing the system state is proposed, based on the integration of acoustic, visual, thermodynamic, and mechanical parameters with the construction of a generalized system of serviceability criteria. Mathematical models are developed to describe the acoustic field of a shot, the processes of formation and evolution of the muzzle discharge, as well as methods for evaluating barrel stability with account taken of thermal and mechanical wear factors. An information model of artillery barrel operation is formulated, incorporating multivector serviceability conditions and enabling automation of residual life calculations. A state tree of the system is constructed for rank-based assessment of the current technical condition, and combat capability criteria are integrated into a unified decision-making model using the ideal point method. An analytical relationship is derived to determine the required number of rounds to engage a target with a specified probability, together with a time-based model for evaluating mission execution that considers a window of particular vulnerability and maneuverability constraints. Computational examples demonstrate the practical implementation of the proposed approach and its applicability to assessing the risk of system loss and substantiating the advisability of opening fire. The results establish a methodological foundation for further automation of condition monitoring of artillery systems and may be employed as an algorithmic module within decision-support systems for combat employment.
- 1 January 2026
- Published by OU Scientific Route
- p. 89-116
Open AccessMethods for determining the states of an artillery gun under dynamic disturbances
This chapter develops a comprehensive model for assessing the technical condition and combat capabilities of a self-propelled artillery system (SPAS) considered as a complex dynamic object operating under conditions of cumulative wear and exposure to external combat factors. An approach to formalizing the system state is proposed, based on the integration of acoustic, visual, thermodynamic, and mechanical parameters with the construction of a generalized system of serviceability criteria. Mathematical models are developed to describe the acoustic field of a shot, the processes of formation and evolution of the muzzle discharge, as well as methods for evaluating barrel stability with account taken of thermal and mechanical wear factors. An information model of artillery barrel operation is formulated, incorporating multivector serviceability conditions and enabling automation of residual life calculations. A state tree of the system is constructed for rank-based assessment of the current technical condition, and combat capability criteria are integrated into a unified decision-making model using the ideal point method. An analytical relationship is derived to determine the required number of rounds to engage a target with a specified probability, together with a time-based model for evaluating mission execution that considers a window of particular vulnerability and maneuverability constraints. Computational examples demonstrate the practical implementation of the proposed approach and its applicability to assessing the risk of system loss and substantiating the advisability of opening fire. The results establish a methodological foundation for further automation of condition monitoring of artillery systems and may be employed as an algorithmic module within decision-support systems for combat employment.
- Open Access
- 1 January 2026
- Published by OU Scientific Route
- p. 143-169
Improving methods and models for artillery combat control
This chapter deals with methodological approaches to estimating the effectiveness of the combat employment of artillery units considering minimization of the loss of combat capability. The definition of combat capability is proposed, which is seen as the ability of a unit to perform assigned tasks under specified operating and external conditions. The influence of external factors and loads on the state of the unit and on the intensity of failure of its elements is analyzed. A stochastic model of the combat operation of an artillery battery is presented. The model is based on a discrete Markov chain structure which allows to estimate time and dynamic characteristics, including the recovery rate, the probability of destructing a target and the average firing time. Criteria for an effective shot are defined. The use of a combined criterion to estimate combat effectiveness is justified. The proposed approaches provide a scientific basis to predict combat capability, optimize control processes and decision-making in automated systems for estimating artillery fire effectiveness. Simulation results demonstrate that the proposed approach allows maintaining the combat capability at a level of 0.78–0.81 for a 10-shot mission, while the ratio between optimal and worst mission structures reaches values from 4 to 10.
- 1 January 2026
- Published by OU Scientific Route
- p. 143-169
Open AccessImproving methods and models for artillery combat control
This chapter deals with methodological approaches to estimating the effectiveness of the combat employment of artillery units considering minimization of the loss of combat capability. The definition of combat capability is proposed, which is seen as the ability of a unit to perform assigned tasks under specified operating and external conditions. The influence of external factors and loads on the state of the unit and on the intensity of failure of its elements is analyzed. A stochastic model of the combat operation of an artillery battery is presented. The model is based on a discrete Markov chain structure which allows to estimate time and dynamic characteristics, including the recovery rate, the probability of destructing a target and the average firing time. Criteria for an effective shot are defined. The use of a combined criterion to estimate combat effectiveness is justified. The proposed approaches provide a scientific basis to predict combat capability, optimize control processes and decision-making in automated systems for estimating artillery fire effectiveness. Simulation results demonstrate that the proposed approach allows maintaining the combat capability at a level of 0.78–0.81 for a 10-shot mission, while the ratio between optimal and worst mission structures reaches values from 4 to 10.
- Open Access
- 30 May 2025
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 3,p. 207-220
Development of mathematical models for temperature control objects in thermal destruction systems based on transient process identification
Thermal destruction systems are essential for processing hydrocarbon waste, requiring precise temperature control to ensure operational efficiency and high product quality. However, accurately modeling the thermal behavior of such systems remains a challenging task due to the need for precise identification of transient heating characteristics. This study addresses this problem by developing an advanced two-point identification approach for constructing transfer function models of temperature control objects. Unlike conventional methods that rely on fixed reference points for each model order, the proposed approach leverages predetermined empirical coefficients, enabling flexible and more accurate identification from any two points on the transient characteristic, even in the presence of noise. The effectiveness of the developed method is validated through the identification of two distinct experimental transient characteristics of a 100-liter reactor within a pilot thermal destruction system under noise conditions. Comparative analysis against three known identification techniques demonstrates that the proposed approach consistently yields the most accurate models while maintaining relatively low computational complexity, due to its versatility and ability to operate in noisy conditions. In particular, the values of the integral squared deviation were reduced by 0.126·105 for the first case and by 0.092·105 for the second case when compared with the best results achieved using the conventional two-point method. This confirms its high efficiency and the feasibility of using it to create comprehensive mathematical models of various systems for thermal destruction of hydrocarbon waste. The proposed approach is particularly well suited for rapid identification of transfer functions under varying operating conditions and can be applied to enhance control strategies, ultimately improving process stability, energy efficiency, and product quality in thermal destruction applications
- 30 May 2025
- Published by OU Scientific Route in EUREKA: Physics and Engineering
- No. 3,p. 207-220
Open AccessDevelopment of mathematical models for temperature control objects in thermal destruction systems based on transient process identification
Thermal destruction systems are essential for processing hydrocarbon waste, requiring precise temperature control to ensure operational efficiency and high product quality. However, accurately modeling the thermal behavior of such systems remains a challenging task due to the need for precise identification of transient heating characteristics. This study addresses this problem by developing an advanced two-point identification approach for constructing transfer function models of temperature control objects. Unlike conventional methods that rely on fixed reference points for each model order, the proposed approach leverages predetermined empirical coefficients, enabling flexible and more accurate identification from any two points on the transient characteristic, even in the presence of noise. The effectiveness of the developed method is validated through the identification of two distinct experimental transient characteristics of a 100-liter reactor within a pilot thermal destruction system under noise conditions. Comparative analysis against three known identification techniques demonstrates that the proposed approach consistently yields the most accurate models while maintaining relatively low computational complexity, due to its versatility and ability to operate in noisy conditions. In particular, the values of the integral squared deviation were reduced by 0.126·105 for the first case and by 0.092·105 for the second case when compared with the best results achieved using the conventional two-point method. This confirms its high efficiency and the feasibility of using it to create comprehensive mathematical models of various systems for thermal destruction of hydrocarbon waste. The proposed approach is particularly well suited for rapid identification of transfer functions under varying operating conditions and can be applied to enhance control strategies, ultimately improving process stability, energy efficiency, and product quality in thermal destruction applications
- Open Access
- 29 January 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 1 (2(81)) , 26-33
Development of methods of artillery control for suppression of an enemy amphibious operation in video game simulations
The paper describes the tactical methods of using artillery guns for counter-amphibious in deep and shallow water landscapes. The study's object is to model military game scenarios, in particular, the role of artillery forces in countering an amphibious operation of one or two divisions. One of the most problematic areas is combining continuous fire support and maneuvering to maintain artillery survivability and save ammunition with limited resources. The study used mathematical models of combat resource utilization based on Markov chains, taking into account the probabilistic aspects of target destruction. Simulation models were also developed for various scenarios of countering amphibious assault ships, which allows for optimizing the number of shells and determining the most effective moments for opening fire. Several approaches to firing have been developed and analyzed: methods of minimizing the number of shells, rapid neutralization of enemy targets, and mixed methods that allow finding a balance between minimizing resources and speed of response. Each method has its advantages depending on the combat situation: cost minimization methods are suitable for controlled scenarios. Instead, methods of rapid destruction are effective in high-risk situations but require more resources. A new mixed tactical method has been developed. This is because the proposed methods have several features, in particular, a large discrepancy in the predicted minefield, which also made it possible to assess the ability to hold the minefield of the fairway, which is important for protection against further attacks. This ensures the possibility of obtaining a high level of minefields on the fairway (up to 67.77 %). Compared to similar indicators, which ranged from 46.42 % to 67.77 %, but without specifying the method, this provided advantages in the form of the possibility of tactical maneuvering between the proposed methods, depending on the current state of resources and the proximity of enemy targets.
- 29 January 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 1 (2(81)) , 26-33
Open AccessDevelopment of methods of artillery control for suppression of an enemy amphibious operation in video game simulations
The paper describes the tactical methods of using artillery guns for counter-amphibious in deep and shallow water landscapes. The study's object is to model military game scenarios, in particular, the role of artillery forces in countering an amphibious operation of one or two divisions. One of the most problematic areas is combining continuous fire support and maneuvering to maintain artillery survivability and save ammunition with limited resources. The study used mathematical models of combat resource utilization based on Markov chains, taking into account the probabilistic aspects of target destruction. Simulation models were also developed for various scenarios of countering amphibious assault ships, which allows for optimizing the number of shells and determining the most effective moments for opening fire. Several approaches to firing have been developed and analyzed: methods of minimizing the number of shells, rapid neutralization of enemy targets, and mixed methods that allow finding a balance between minimizing resources and speed of response. Each method has its advantages depending on the combat situation: cost minimization methods are suitable for controlled scenarios. Instead, methods of rapid destruction are effective in high-risk situations but require more resources. A new mixed tactical method has been developed. This is because the proposed methods have several features, in particular, a large discrepancy in the predicted minefield, which also made it possible to assess the ability to hold the minefield of the fairway, which is important for protection against further attacks. This ensures the possibility of obtaining a high level of minefields on the fairway (up to 67.77 %). Compared to similar indicators, which ranged from 46.42 % to 67.77 %, but without specifying the method, this provided advantages in the form of the possibility of tactical maneuvering between the proposed methods, depending on the current state of resources and the proximity of enemy targets.
- 1 January 2024
- Published by Odessa Polytechnic National University in ELECTRICAL AND COMPUTER SYSTEMS
- No. 39(115),p. 42-54
MODEL AND METHOD OF DECISION-MAKING RULES FOR THE FORMATION OF THE STRUCTURE OF TECHNICAL EQUIPMENT IN PROCESSES OF THERMAL DESTRUCTION OF MSW IN THE NORMATION OF ACID GASES EMISSIONS
A simulation model for the purification process of classified municipal solid waste (MSW) has been developed, taking into account the consumption of resources to bring the resulting carbon-hydrogen gases from the classified MSW of the main group to an environmentally acceptable state, which will ensure that the impurities of groups that form acid gases are taken into account for various conditions of processing by thermal destruction methods. Decision-making rules for the formation of the structure of technical means for the purpose of processing solid waste using thermal destruction. A comprehensive technological scheme of the thermal recycling method is presented, ensuring compliance with environmental conditions for emissions into the environment when using secondary energy resources obtained from solid waste. Key words: municipal solid waste, thermal destruction, thermal utilization, pyrolysis, incineration, acid gases.
- 1 January 2024
- Published by Odessa Polytechnic National University in ELECTRICAL AND COMPUTER SYSTEMS
- No. 39(115),p. 42-54
MODEL AND METHOD OF DECISION-MAKING RULES FOR THE FORMATION OF THE STRUCTURE OF TECHNICAL EQUIPMENT IN PROCESSES OF THERMAL DESTRUCTION OF MSW IN THE NORMATION OF ACID GASES EMISSIONS
A simulation model for the purification process of classified municipal solid waste (MSW) has been developed, taking into account the consumption of resources to bring the resulting carbon-hydrogen gases from the classified MSW of the main group to an environmentally acceptable state, which will ensure that the impurities of groups that form acid gases are taken into account for various conditions of processing by thermal destruction methods. Decision-making rules for the formation of the structure of technical means for the purpose of processing solid waste using thermal destruction. A comprehensive technological scheme of the thermal recycling method is presented, ensuring compliance with environmental conditions for emissions into the environment when using secondary energy resources obtained from solid waste. Key words: municipal solid waste, thermal destruction, thermal utilization, pyrolysis, incineration, acid gases.
- Open Access
- 24 November 2023
- Published by European Scientific Platform (Publications)
- No. November 2,p. 118-124
ПОСТАНОВКА ОПТИМІЗАЦІЙНОГО ЗАВДАННЯ ОПТИМАЛЬНОГО КЕРУВАННЯ ЗАСОБАМИ АСУ ТП
Для оцінки ефективності управління системою теплопостачання із змінюваною структурою було запропоновано критерій. Для розв’язання задачі оптимального управління використовувати комплексний критерій, який враховує надійність системи, якість управління, вартісний показник ресурсів та ефективність обладнання. Надійність визначається двома складовими ймовірностями раптових та зносових відмов. Якість перехідних процесів розраховується з використанням дисперсії відхилення поточної температури повітря в приміщенні від заданої на мінімальному інтервалі для поточного плану перемикання обладнання. Ефективність обладнання обчислюється за енергетичним ККД. Математична модель вибору оптимальної структури системи має додатковій аргумент план перемикання технічних засобів за часом. В остаточній формі ураховуються зважування критеріїв цільова функція за рахунок вагових коефіцієнтів, які визначаються експертним методом.
- 24 November 2023
- Published by European Scientific Platform (Publications)
- No. November 2,p. 118-124
Open AccessПОСТАНОВКА ОПТИМІЗАЦІЙНОГО ЗАВДАННЯ ОПТИМАЛЬНОГО КЕРУВАННЯ ЗАСОБАМИ АСУ ТП
Для оцінки ефективності управління системою теплопостачання із змінюваною структурою було запропоновано критерій. Для розв’язання задачі оптимального управління використовувати комплексний критерій, який враховує надійність системи, якість управління, вартісний показник ресурсів та ефективність обладнання. Надійність визначається двома складовими ймовірностями раптових та зносових відмов. Якість перехідних процесів розраховується з використанням дисперсії відхилення поточної температури повітря в приміщенні від заданої на мінімальному інтервалі для поточного плану перемикання обладнання. Ефективність обладнання обчислюється за енергетичним ККД. Математична модель вибору оптимальної структури системи має додатковій аргумент план перемикання технічних засобів за часом. В остаточній формі ураховуються зважування критеріїв цільова функція за рахунок вагових коефіцієнтів, які визначаються експертним методом.
- 1 November 2023
- Published by Odessa Polytechnic National University in ELECTRICAL AND COMPUTER SYSTEMS
- Vol. 38 (114) , 30-39
AUTOMATED CONTROL OF THE HEAT SUPPLY SYSTEM WITH A VARIABLE STRUCTURE ACCORDING TO THE VALUE OF THE OBJECTIVE FUNCTION OF THE OPTIMIZATION PROBLEM
- 1 November 2023
- Published by Odessa Polytechnic National University in ELECTRICAL AND COMPUTER SYSTEMS
- Vol. 38 (114) , 30-39
AUTOMATED CONTROL OF THE HEAT SUPPLY SYSTEM WITH A VARIABLE STRUCTURE ACCORDING TO THE VALUE OF THE OBJECTIVE FUNCTION OF THE OPTIMIZATION PROBLEM