Irene Sánchez-Ramos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Irene Sánchez-Ramos has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
David Mediavilla-Martín
Colegio Los Sauces
2 shared publications- Fernando Meseguer-Garrido
Universidad Politécnica de Madrid
2 shared publications - Javier Francisco Raposo Grau
Universidad Politécnica de Madrid
2 shared publications - Enrique Martinez-Gonzalez
Instituto de Física de Cantabria (IFCA), Avda. Los Castros s/n, 39005 Santander, Spain
1 shared publication - Francisco Javier Casas
Instituto de Física de Cantabria (IFCA), Avda. Los Castros s/n, 39005 Santander, Spain
1 shared publication - Guillermo Pascual-Cisneros
Kavli Institute for the Physics and Mathematics of the Universe (Kavli IPMU), The University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa 277-8583, Chiba, Japan
1 shared publication
Latest Publications
- Open Access
- 7 May 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 133 (1) , 89
From Ground to Orbit: Adapting CMB Calibration Technology for Space
The Cosmic Microwave Background (CMB) carries crucial information about the origin and evolution of the Universe, with its polarization patterns providing potential evidence of primordial gravitational waves. Achieving the precision required for these measurements demands highly accurate calibration methods. This study presents the development of a reference signal source to be integrated as the payload of LEO-CalSat, a Low-Earth Orbit satellite designed to serve as an artificial, far-field calibration tool for ground-based CMB polarization experiments. The system aims both to validate the technological readiness of a compact calibration payload for future L2 missions and to provide reference signals in the W-band (75–110 GHz) for current observatories. The calibration source, integrated within the volume of a CubeSat’s 2 U, was designed to balance miniaturization with performance, incorporating key components such as a frequency multiplier with a Voltage-Controlled Oscillator, horn antenna, and polarizer. Laboratory tests demonstrated fully polarized emission with output powers up to 6 dBm and a signal-to-noise ratio of approximately 30 dB, confirming the feasibility of precise polarization calibration. The reduced mass and power consumption (1 kg, 9 W) ensure compatibility with CubeSat constraints. The results validate the core concept and readiness of LEO-CalSat for space operation, representing a significant step toward establishing standardized, space-based calibration for future CMB missions and advancing precision cosmology.
- 7 May 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 133 (1) , 89
Open AccessFrom Ground to Orbit: Adapting CMB Calibration Technology for Space
The Cosmic Microwave Background (CMB) carries crucial information about the origin and evolution of the Universe, with its polarization patterns providing potential evidence of primordial gravitational waves. Achieving the precision required for these measurements demands highly accurate calibration methods. This study presents the development of a reference signal source to be integrated as the payload of LEO-CalSat, a Low-Earth Orbit satellite designed to serve as an artificial, far-field calibration tool for ground-based CMB polarization experiments. The system aims both to validate the technological readiness of a compact calibration payload for future L2 missions and to provide reference signals in the W-band (75–110 GHz) for current observatories. The calibration source, integrated within the volume of a CubeSat’s 2 U, was designed to balance miniaturization with performance, incorporating key components such as a frequency multiplier with a Voltage-Controlled Oscillator, horn antenna, and polarizer. Laboratory tests demonstrated fully polarized emission with output powers up to 6 dBm and a signal-to-noise ratio of approximately 30 dB, confirming the feasibility of precise polarization calibration. The reduced mass and power consumption (1 kg, 9 W) ensure compatibility with CubeSat constraints. The results validate the core concept and readiness of LEO-CalSat for space operation, representing a significant step toward establishing standardized, space-based calibration for future CMB missions and advancing precision cosmology.
- 2 February 2024
- Published by Springer Nature
- p. 853-861
Anamorphosis to Improve Students’ Perception of Geometry. Intervention Methodology in Upper Secondary Education
- 2 February 2024
- Published by Springer Nature
- p. 853-861
Anamorphosis to Improve Students’ Perception of Geometry. Intervention Methodology in Upper Secondary Education
- Open Access
- 1 January 2023
- Published by Universidad de Zaragoza
Aprendizaje de razonamiento lógico-espacial mediante el uso de puzles impresos en 3D - [Training spatial and logic reasoning with 3D printed puzzles]
El presente proyecto pretende mejorar la capacidad de visión espacial del alumnado mediante la visualización y manipulación de objetos tridimensionales impresos en 3D. La intervención se enfocó en estudiantes de primero de ingeniería debido a las dificultades de razonamiento abstracto y de visualización espacial que presentan. Durante el desarrollo del proyecto se creó un conjunto de piezas modulares, diseñadas específicamente para la intervención, que posteriormente se imprimieron en 3D. Con este proyecto se pretende que el alumnado conozca y comprenda el Método Lógico Geométrico como una estrategia que mejore su capacidad de razonar ordenadamente y de evaluar problemas geométricos, analizando su determinación y vías de solución. Finalmente, se analizaron los resultados obtenidos mediante unas pruebas de evaluación, diseñados para el proyecto. Los resultados arrojaron una ligera mejora en la comprensión espacial de los estudiantes y en el aprendizaje del Método Lógico Geométrico. González Pérez, Raquel; Sánchez-Ramos, Irene; Avila-Sanchez, Sergio
- 1 January 2023
- Published by Universidad de Zaragoza
Open AccessAprendizaje de razonamiento lógico-espacial mediante el uso de puzles impresos en 3D - [Training spatial and logic reasoning with 3D printed puzzles]
El presente proyecto pretende mejorar la capacidad de visión espacial del alumnado mediante la visualización y manipulación de objetos tridimensionales impresos en 3D. La intervención se enfocó en estudiantes de primero de ingeniería debido a las dificultades de razonamiento abstracto y de visualización espacial que presentan. Durante el desarrollo del proyecto se creó un conjunto de piezas modulares, diseñadas específicamente para la intervención, que posteriormente se imprimieron en 3D. Con este proyecto se pretende que el alumnado conozca y comprenda el Método Lógico Geométrico como una estrategia que mejore su capacidad de razonar ordenadamente y de evaluar problemas geométricos, analizando su determinación y vías de solución. Finalmente, se analizaron los resultados obtenidos mediante unas pruebas de evaluación, diseñados para el proyecto. Los resultados arrojaron una ligera mejora en la comprensión espacial de los estudiantes y en el aprendizaje del Método Lógico Geométrico. González Pérez, Raquel; Sánchez-Ramos, Irene; Avila-Sanchez, Sergio
- Open Access
- 28 October 2022
- Published by Universitat Politecnica de Valencia in VLC arquitectura. Research Journal
- Vol. 9 (2) , 179-200
Energy and comfort. The historical evolution of the façade in Western Architecture
The envelope is considered to be the boundary between the outside and the inside of a building. The aim of this study is to analyze both the process that led the concept of the façade to evolve in Western architecture and the repercussions of such evolution, focusing on energy consumption and comfort. The entire evolution of the façade has been closely related to the evolution of materials and construction technologies. The comfort and energy characteristics of architecture have always been determined by the materials and construction technologies employed in façades. Architecture has improved in technical aspects, especially in terms of lighting and thermal comfort. Nevertheless, thermal comfort is usually linked to energy consumption, which is the parameter that has increased the most in this development, with the only exception being sustainable architecture.
- 28 October 2022
- Published by Universitat Politecnica de Valencia in VLC arquitectura. Research Journal
- Vol. 9 (2) , 179-200
Open AccessEnergy and comfort. The historical evolution of the façade in Western Architecture
The envelope is considered to be the boundary between the outside and the inside of a building. The aim of this study is to analyze both the process that led the concept of the façade to evolve in Western architecture and the repercussions of such evolution, focusing on energy consumption and comfort. The entire evolution of the façade has been closely related to the evolution of materials and construction technologies. The comfort and energy characteristics of architecture have always been determined by the materials and construction technologies employed in façades. Architecture has improved in technical aspects, especially in terms of lighting and thermal comfort. Nevertheless, thermal comfort is usually linked to energy consumption, which is the parameter that has increased the most in this development, with the only exception being sustainable architecture.
- Open Access
- 22 February 2021
- Published by Universidad Nacional de Colombia in DYNA
- Vol. 88 (216) , 196-202
Generalization of the pedal concept in bidimensional spaces. Application to the limaçon of Pascal
The concept of a pedal curve is used in geometry as a generation method for a multitude of curves. The definition of a pedal curve is linked to the concept of minimal distance. However, an interesting distinction can be made for ℝ2. In this space, the pedal curve of another curve C is defined as the locus of the foot of the perpendicular from the pedal point P to the tangent to the curve. This allows the generalization of the definition of the pedal curve for any given angle that is not 90º.In this paper, we use the generalization of the pedal curve to describe a different method to generate a limaçon of Pascal, which can be seen as a singular case of the locus generation method and is not well described in the literature. Some additional properties that can be deduced from these definitions are also described.
- 22 February 2021
- Published by Universidad Nacional de Colombia in DYNA
- Vol. 88 (216) , 196-202
Open AccessGeneralization of the pedal concept in bidimensional spaces. Application to the limaçon of Pascal
The concept of a pedal curve is used in geometry as a generation method for a multitude of curves. The definition of a pedal curve is linked to the concept of minimal distance. However, an interesting distinction can be made for ℝ2. In this space, the pedal curve of another curve C is defined as the locus of the foot of the perpendicular from the pedal point P to the tangent to the curve. This allows the generalization of the definition of the pedal curve for any given angle that is not 90º.In this paper, we use the generalization of the pedal curve to describe a different method to generate a limaçon of Pascal, which can be seen as a singular case of the locus generation method and is not well described in the literature. Some additional properties that can be deduced from these definitions are also described.