Sylvain Calassou
Research Subjects
Sylvain Calassou has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Emmanuel Masini
M&U sas, Sassenage, France; ISTerre, Earth Sciences Institute, Grenoble, France
4 shared publications - Maxime Ducoux
M&U sas, Sassenage, France
4 shared publications - Laurent Jolivet
ISTEP
3 shared publications Emmanuel Masini
M&U France Grenoble France
2 shared publications- Frédéric Mouthereau
Laboratoire des Fluides Complexes et de leurs Réservoirs, Universite de Pau et des Pays de l’Adour, CNRS, E2S UPPA, LFCR, Pau, France
2 shared publications - Gianreto Manatschal
Université de Strasbourg, CNRS, ENGEES Strasbourg France
2 shared publications
Latest Publications
- Open Access
- 7 November 2023
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 24 (11)
Mantle Deformation Processes During the Rift‐To‐Drift Transition at Magma‐Poor Margins
The rift‐to‐drift transition at rifted margins is an area of active investigation due to an incomplete understanding of the spatial and temporal evolution of physical and chemical processes at the ocean‐continent transition (OCT). Deep structures that characterize modern OCTs are often difficult to identify by seismic observations, while terrestrial exposures are preserved in fragments separated by tectonic discontinuities. Numerical modeling is a powerful method for contextualizing physical processes and observations relevant to rifted margin evolution. We synthesize results from geological observations of fossil OCTs preserved in ophiolites, a recent seismic experiment on the Ivorian margin, and numerical modeling to characterize mantle deformation and melt production for magma‐poor margins. Across varied surface heat fluxes, mantle potential temperatures, and extension rates, our model results show homologies with geological observations. We propose that the development of large shear zones in the mantle, melt infiltration, grain size reduction, and anastomosing detachment faults control the structure of OCTs. We also infer that a hot, upwelling, melt‐rich asthenosphere is an important control on the local stress environment. During the exhumation phase, continentward‐dipping shear zones couple with seaward‐dipping detachment faults to exhume the subcontinental and formerly asthenospheric mantle. The mantle forms core‐complex‐like domes of peridotite at or near the surface. The faults that exhume these peridotite bodies are largely anastomosing and exhibit magmatic accretion in their footwalls. A combination of magmatic accretion and volcanic activity derived from the shallow melt region constructs the oceanic lithosphere in the footwalls of the out‐of‐sequence continentward‐dipping detachment faults in the oceanic crust and subcontinental mantle.
- 7 November 2023
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 24 (11)
Open AccessMantle Deformation Processes During the Rift‐To‐Drift Transition at Magma‐Poor Margins
The rift‐to‐drift transition at rifted margins is an area of active investigation due to an incomplete understanding of the spatial and temporal evolution of physical and chemical processes at the ocean‐continent transition (OCT). Deep structures that characterize modern OCTs are often difficult to identify by seismic observations, while terrestrial exposures are preserved in fragments separated by tectonic discontinuities. Numerical modeling is a powerful method for contextualizing physical processes and observations relevant to rifted margin evolution. We synthesize results from geological observations of fossil OCTs preserved in ophiolites, a recent seismic experiment on the Ivorian margin, and numerical modeling to characterize mantle deformation and melt production for magma‐poor margins. Across varied surface heat fluxes, mantle potential temperatures, and extension rates, our model results show homologies with geological observations. We propose that the development of large shear zones in the mantle, melt infiltration, grain size reduction, and anastomosing detachment faults control the structure of OCTs. We also infer that a hot, upwelling, melt‐rich asthenosphere is an important control on the local stress environment. During the exhumation phase, continentward‐dipping shear zones couple with seaward‐dipping detachment faults to exhume the subcontinental and formerly asthenospheric mantle. The mantle forms core‐complex‐like domes of peridotite at or near the surface. The faults that exhume these peridotite bodies are largely anastomosing and exhibit magmatic accretion in their footwalls. A combination of magmatic accretion and volcanic activity derived from the shallow melt region constructs the oceanic lithosphere in the footwalls of the out‐of‐sequence continentward‐dipping detachment faults in the oceanic crust and subcontinental mantle.
- Open Access
- 28 March 2023
- Published by Wiley in ESS Open Archive
Mantle Deformation Processes during the Rift-to-Drift Transition at Magma-Poor Margins
The rift-to-drift transition at rifted margins is an area of active investigation due to unresolved issues of the ocean-continent transition (OCT). Deep structures that characterize modern OCTs are often difficult to identify by seismic observations, while terrestrial exposures are preserved in fragments separated by tectonic discontinuities. Numerical modeling is a powerful method for contextualizing observations within rifted margin evolution. In this article, we synthesize geological observations from fossil ocean-continent transitions preserved in ophiolites, a recent seismic experiment on the Ivorian Margin of West Africa, and GeoFLAC models to characterize mantle deformation and melt production for magma-poor margins. Across varied surface heat fluxes, mantle potential temperatures, and extension rates our model results show important homologies with geological observations. We propose that the development of large shear zones in the mantle, melt infiltration, grain size reduction, and anastomosing detachment faults control the structure of OCTs. We also infer through changes in fault orientation that upwelling, melt-rich asthenosphere is an important control on the local stress environment. During the exhumation phase of rifting, continentward-dipping shear zones couple with seaward-dipping detachment faults to exhume the subcontinental and formerly asthenospheric mantle. The mantle forms into core-complex-like domes of peridotite at or near the surface. The faults that exhume these peridotite bodies are largely anastomosing and exhibit magmatic accretion in their footwalls. A combination of magmatic accretion and volcanic activity derived from the shallow melt region constructs the oceanic lithosphere in the footwalls of the out-of-sequence, continentward-dipping detachment faults in the oceanic crust and subcontinental mantle.
- 28 March 2023
- Published by Wiley in ESS Open Archive
Open AccessMantle Deformation Processes during the Rift-to-Drift Transition at Magma-Poor Margins
The rift-to-drift transition at rifted margins is an area of active investigation due to unresolved issues of the ocean-continent transition (OCT). Deep structures that characterize modern OCTs are often difficult to identify by seismic observations, while terrestrial exposures are preserved in fragments separated by tectonic discontinuities. Numerical modeling is a powerful method for contextualizing observations within rifted margin evolution. In this article, we synthesize geological observations from fossil ocean-continent transitions preserved in ophiolites, a recent seismic experiment on the Ivorian Margin of West Africa, and GeoFLAC models to characterize mantle deformation and melt production for magma-poor margins. Across varied surface heat fluxes, mantle potential temperatures, and extension rates our model results show important homologies with geological observations. We propose that the development of large shear zones in the mantle, melt infiltration, grain size reduction, and anastomosing detachment faults control the structure of OCTs. We also infer through changes in fault orientation that upwelling, melt-rich asthenosphere is an important control on the local stress environment. During the exhumation phase of rifting, continentward-dipping shear zones couple with seaward-dipping detachment faults to exhume the subcontinental and formerly asthenospheric mantle. The mantle forms into core-complex-like domes of peridotite at or near the surface. The faults that exhume these peridotite bodies are largely anastomosing and exhibit magmatic accretion in their footwalls. A combination of magmatic accretion and volcanic activity derived from the shallow melt region constructs the oceanic lithosphere in the footwalls of the out-of-sequence, continentward-dipping detachment faults in the oceanic crust and subcontinental mantle.
- Open Access
Inverted Magma-rich Versus Magma-poor Rifted Margins: Implications for Early Orogenic Systems
Mountain belts are often the result of former inverted rifts or rifted margins. Up to date, relics of magma-poor rifted margins have been found in orogens allowing the investigation of how these margins reactivate and control the formation of mountain belts. In contrast, magma-rich rifted margins have barely been recognized within orogenic systems, and consequently how these margins reactivate and control subsequent orogenesis is poorly understood. We use a thermo-mechanical model to investigate the mechanical behaviour of reactivated magma-rich versus magma-poor rifted margins during early orogenesis (i.e. margin inversion). Input data for our modelling experiments are obtained from two natural laboratories. One is the Demerara Plateau characterized by a mildly shortened magma-rich rifted margin. Its décollement level is observed at the top of the syn-kinematic volcanics, which propagates downwards into a frozen incipient subduction. The other study-case is the Basque-Cantabrian Belt consisting of a reactivated magma-poor hyper-extended rift system with the décollement level at the bottom of the syn-rift sediments. Our modelling results, for inverted magma-rich rifted margin, show that the syn-kinematic volcanics undergo subduction as they are mechanically coupled with the underlying rifted lithosphere. Hence, only post-rift sediments are accreted within the early orogenic accretionary wedge. In contrast, both the syn- and post-rift sediments from a reactivated magma-poor rifted margin are expected to be preserved within the accretionary wedge. Therefore, we conclude that the presence or absence of syn-rift sediments within an accretionary prism may represent a robust indicator to determine the nature of reactivated rifted margins within orogens. We believe that our results may strongly contribute to recognize, the so far poorly identified, magma-rich rifted margins within present-day orogenic systems.
Open AccessInverted Magma-rich Versus Magma-poor Rifted Margins: Implications for Early Orogenic Systems
Mountain belts are often the result of former inverted rifts or rifted margins. Up to date, relics of magma-poor rifted margins have been found in orogens allowing the investigation of how these margins reactivate and control the formation of mountain belts. In contrast, magma-rich rifted margins have barely been recognized within orogenic systems, and consequently how these margins reactivate and control subsequent orogenesis is poorly understood. We use a thermo-mechanical model to investigate the mechanical behaviour of reactivated magma-rich versus magma-poor rifted margins during early orogenesis (i.e. margin inversion). Input data for our modelling experiments are obtained from two natural laboratories. One is the Demerara Plateau characterized by a mildly shortened magma-rich rifted margin. Its décollement level is observed at the top of the syn-kinematic volcanics, which propagates downwards into a frozen incipient subduction. The other study-case is the Basque-Cantabrian Belt consisting of a reactivated magma-poor hyper-extended rift system with the décollement level at the bottom of the syn-rift sediments. Our modelling results, for inverted magma-rich rifted margin, show that the syn-kinematic volcanics undergo subduction as they are mechanically coupled with the underlying rifted lithosphere. Hence, only post-rift sediments are accreted within the early orogenic accretionary wedge. In contrast, both the syn- and post-rift sediments from a reactivated magma-poor rifted margin are expected to be preserved within the accretionary wedge. Therefore, we conclude that the presence or absence of syn-rift sediments within an accretionary prism may represent a robust indicator to determine the nature of reactivated rifted margins within orogens. We believe that our results may strongly contribute to recognize, the so far poorly identified, magma-rich rifted margins within present-day orogenic systems.
- Open Access
- 4 January 2022
- Published by EDP Sciences in BSGF - Earth Sciences Bulletin
- Vol. 193, 1
Passive imaging of collisional orogens: a review of a decade of geophysical studies in the Pyrénées
This contribution reviews the challenges of imaging collisional orogens, focusing on the example of the Pyrenean domain. Indeed, important progresses have been accomplished regarding our understanding of the architecture of this mountain range over the last decades, thanks to the development of innovative passive imaging techniques, relying on a more thorough exploitation of the information in seismic signals, as well as new seismic acquisitions. New tomographic images provide evidence for continental subduction of Iberian crust beneath the western and central Pyrénées, but not beneath the eastern Pyrénées. Relics of a Cretaceous hyper-extended and segmented rift are found within the North Pyrenean Zone, where the imaged crust is thinner (10–25 km). This zone of thinned crust coincides with a band of positive Bouguer anomalies that is absent in the Eastern Pyrénées. Overall, the new tomographic images provide further support to the idea that the Pyrénées result from the inversion of hyperextended segmented rift systems.
- 4 January 2022
- Published by EDP Sciences in BSGF - Earth Sciences Bulletin
- Vol. 193, 1
Open AccessPassive imaging of collisional orogens: a review of a decade of geophysical studies in the Pyrénées
This contribution reviews the challenges of imaging collisional orogens, focusing on the example of the Pyrenean domain. Indeed, important progresses have been accomplished regarding our understanding of the architecture of this mountain range over the last decades, thanks to the development of innovative passive imaging techniques, relying on a more thorough exploitation of the information in seismic signals, as well as new seismic acquisitions. New tomographic images provide evidence for continental subduction of Iberian crust beneath the western and central Pyrénées, but not beneath the eastern Pyrénées. Relics of a Cretaceous hyper-extended and segmented rift are found within the North Pyrenean Zone, where the imaged crust is thinner (10–25 km). This zone of thinned crust coincides with a band of positive Bouguer anomalies that is absent in the Eastern Pyrénées. Overall, the new tomographic images provide further support to the idea that the Pyrénées result from the inversion of hyperextended segmented rift systems.
- Open Access
- 18 October 2021
- Published by EDP Sciences in BSGF - Earth Sciences Bulletin
- Vol. 192, 43
Distribution and intensity of High-Temperature Low-Pressure metamorphism across the Pyrenean-Cantabrian belt: constraints on the thermal record of the pre-orogenic hyperextension rifting
Whereas a straightforward link between crustal thinning and geothermal gradients during rifting is now well established, the thermal structure of sedimentary basins within hyperextended domains remains poorly documented. For this purpose, we investigate the spatial distribution of rift-related High-Temperature Low-Pressure (HT/LP) metamorphism recorded in the preserved hyperextended rift basins inverted and integrated in the Pyrenean-Cantabrian belt. Based on Vitrinite Reflectance (Ro) data measured in 169 boreholes and more than 200 peak-metamorphic temperatures (Tmax) data obtained by Raman Spectroscopy of Carbonaceous Material (RSCM) added to ∼425 previously publishedTmaxdata, we propose a new map depicting the spatial distribution of the HT/LPmetamorphism of the Pyrenean-Cantabrian belt. We also provide three regional-scale geological cross-sections associated with RoandTmaxdata to constrain the distribution of paleo-isograds at depth. Based on these results, we show that the impact of rift-related metamorphism is restricted to the pre- and syn-rift sequence suggested by the depth profiles of Rovalues measured in different tectonostratigraphic intervals (pre-, syn- and post-rift and syn-convergence sediments). However, a small strip of early orogenic sediments (Santonian in age) appears also affected by high temperatures along the North Pyrenean Frontal Thrust and above the Grand Rieu ridge, which we attribute to the percolation of hot hydrothermal fluids sourced from the dehydration of underthrust basement and/or sedimentary rocks at depth during the early orogenic stage. The map shows that the HT/LPmetamorphism (reaching ∼500 °C) is recorded with similar intensity along the Pyrenean-Cantabrian belt from the west in the Basque-Cantabrian Basin to the east in the Boucheville and Bas-Agly basins, for similar burial and rift-related structural settings. This thermal peak is also recorded underneath the northern border of the Mauléon Basin (calibrated by wells). It suggests that the high temperatures were recorded at the basement-sediment interface underneath the most distal part of the hyperextended domain. At basin-scale, we observe in the Basque-Cantabrian, Mauléon-Arzacq and Tarascon rift segments an asymmetry of the thermal structure revealed by different horizontal thermal gradients, supporting an asymmetry of the former hyperextended rift system. Using our results, we compare the Pyrénées to the Alps that also recorded hyperextension but no HT/LPmetamorphic event and suggest that the high-temperature record within the basins depends on high sedimentation rate promoting a thermal blanketing effect and circulation of hydrothermal fluids.
- 18 October 2021
- Published by EDP Sciences in BSGF - Earth Sciences Bulletin
- Vol. 192, 43
Open AccessDistribution and intensity of High-Temperature Low-Pressure metamorphism across the Pyrenean-Cantabrian belt: constraints on the thermal record of the pre-orogenic hyperextension rifting
Whereas a straightforward link between crustal thinning and geothermal gradients during rifting is now well established, the thermal structure of sedimentary basins within hyperextended domains remains poorly documented. For this purpose, we investigate the spatial distribution of rift-related High-Temperature Low-Pressure (HT/LP) metamorphism recorded in the preserved hyperextended rift basins inverted and integrated in the Pyrenean-Cantabrian belt. Based on Vitrinite Reflectance (Ro) data measured in 169 boreholes and more than 200 peak-metamorphic temperatures (Tmax) data obtained by Raman Spectroscopy of Carbonaceous Material (RSCM) added to ∼425 previously publishedTmaxdata, we propose a new map depicting the spatial distribution of the HT/LPmetamorphism of the Pyrenean-Cantabrian belt. We also provide three regional-scale geological cross-sections associated with RoandTmaxdata to constrain the distribution of paleo-isograds at depth. Based on these results, we show that the impact of rift-related metamorphism is restricted to the pre- and syn-rift sequence suggested by the depth profiles of Rovalues measured in different tectonostratigraphic intervals (pre-, syn- and post-rift and syn-convergence sediments). However, a small strip of early orogenic sediments (Santonian in age) appears also affected by high temperatures along the North Pyrenean Frontal Thrust and above the Grand Rieu ridge, which we attribute to the percolation of hot hydrothermal fluids sourced from the dehydration of underthrust basement and/or sedimentary rocks at depth during the early orogenic stage. The map shows that the HT/LPmetamorphism (reaching ∼500 °C) is recorded with similar intensity along the Pyrenean-Cantabrian belt from the west in the Basque-Cantabrian Basin to the east in the Boucheville and Bas-Agly basins, for similar burial and rift-related structural settings. This thermal peak is also recorded underneath the northern border of the Mauléon Basin (calibrated by wells). It suggests that the high temperatures were recorded at the basement-sediment interface underneath the most distal part of the hyperextended domain. At basin-scale, we observe in the Basque-Cantabrian, Mauléon-Arzacq and Tarascon rift segments an asymmetry of the thermal structure revealed by different horizontal thermal gradients, supporting an asymmetry of the former hyperextended rift system. Using our results, we compare the Pyrénées to the Alps that also recorded hyperextension but no HT/LPmetamorphic event and suggest that the high-temperature record within the basins depends on high sedimentation rate promoting a thermal blanketing effect and circulation of hydrothermal fluids.
- Top Cited PapersOpen Access
- 20 August 2021
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 22 (8)
Native H2 Exploration in the Western Pyrenean Foothills
Native hydrogen (H2) may represent a new carbon free‐energy resource, but to date there is no specific exploration guide to target H2‐fertile geological settings. Here, we present the first soil gas survey specifically designed to explore H2 migration in a region where no surface seepage has been documented so far. We choose the Pyrenean orogenic belt and its northern foreland basin (Aquitaine, France) as a test site for our strategy. The presence of mantle rocks at shallow depth (2 generation and drainage. On this basis, more than 1,100 in situ soil gas analysis (H2, CO, CO2, CH4, H2S, and 222Rn) were performed at ∼1 m depth at the regional scale along a 10 × 10 km grid spanning over 7,500 km2. The analysis campaign reveals several areas of high occurrence to the north of the Mauléon Basin where H2, CO2, and 222Rn concentrations exceed 1,000 ppmv, 10 vol%, and 50 kBq m−3, respectively. Most of these hot spots are located along the North Pyrenean Frontal Thrust and other related faults rooted in the mantle body. These results, together with evidence from the literature of fluid migration at depth, suggest that H2 may be sourced from mantle rocks serpentinization and carried to the surface along major thrusting faults. Traps containing hydrogen remain unidentified up to now but the presence of salt‐related structures (diapirs) near these hot spots is considered encouraging.
- 20 August 2021
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 22 (8)
Top Cited PapersOpen AccessNative H2 Exploration in the Western Pyrenean Foothills
Native hydrogen (H2) may represent a new carbon free‐energy resource, but to date there is no specific exploration guide to target H2‐fertile geological settings. Here, we present the first soil gas survey specifically designed to explore H2 migration in a region where no surface seepage has been documented so far. We choose the Pyrenean orogenic belt and its northern foreland basin (Aquitaine, France) as a test site for our strategy. The presence of mantle rocks at shallow depth (2 generation and drainage. On this basis, more than 1,100 in situ soil gas analysis (H2, CO, CO2, CH4, H2S, and 222Rn) were performed at ∼1 m depth at the regional scale along a 10 × 10 km grid spanning over 7,500 km2. The analysis campaign reveals several areas of high occurrence to the north of the Mauléon Basin where H2, CO2, and 222Rn concentrations exceed 1,000 ppmv, 10 vol%, and 50 kBq m−3, respectively. Most of these hot spots are located along the North Pyrenean Frontal Thrust and other related faults rooted in the mantle body. These results, together with evidence from the literature of fluid migration at depth, suggest that H2 may be sourced from mantle rocks serpentinization and carried to the surface along major thrusting faults. Traps containing hydrogen remain unidentified up to now but the presence of salt‐related structures (diapirs) near these hot spots is considered encouraging.
- Open Access
- 10 March 2020
- Published by Copernicus GmbH
The Pyrenees within the Iberian plate boundary: How much an orogenic lifecycle can be influenced by rift structural inheritances?
The Orogen project is a 5-years geosciences research program resulting from an alliance between the CNRS, the French geological survey (BRGM) and Total R&D. Focusing on the Africa-Europe diffuse plate boundary across Iberia, « Orogen » aims at to better understand orogenic processes and its driving mechanisms. One advantage of the project’s playground is that all of the orogenic maturity stages are today exposed from the incipient subduction of the Bay of Biscay to the post orogenic back-arc extension of the Gulf of Lion. One of the significant outcomes of the project is to reveal the fundamental control of the divergent setting on orogenesis through space and time. Through the reconstructed evolution of the Pyrenees, two main types of structural controls can be documented: 1) the crustal template and the spatial partitioning of rifts. Orogenesis starts by a pre-collision stage that consists in the subduction/underthrusting of an inherited divergent « consumable ». It corresponds to the domains located ahead of crustal necking zones (i.e. hyperextended rifts). An exception to the subduction fate of the « consumable » results from the 3D segmentation of rifts. At this stage, shortening needs to spatially linkup different rift axes by shortcutting relay zone. It results in by back stepping the “subduction” from one branch of rift to the other. It leads to anomalously sample pieces of the « consumable » on the upper plate of the subduction (e.g. Mauléon hyperextended rift in the Western Pyrenees). Once convergence consumes its « consumable », mature collision occurs when crustal necking zones interact with the "subduction" fault plane. Indeed, underthrusting more buoyant thicker crust requires an increase of tectonic stress. At the plate boundary scale, it forces convergence to reorganize spatially and implies the inversion of neighboring less mature branches of rifts by far field stress transmission rather than rupturing unstretched continental domains. When reaching a critical level of stress, crustal indentation starts and thick-skin nappe-stacking propagates beyond necking zones into thick crustal domains. Crustal thickening accelerates launching foreland basin dynamics while orogenic reliefs increase. The orogenic system tends to reach a new equilibrium between tectonic and body forces, accommodated strain, sustaining reliefs and their surface processes counterpart. Then, two end-member cases of post-orogenic dynamic can be defined. Starting right after early orogeny and forced by lateral mature collision, an orogenic system can enter in a "forced" back-arc dynamic (e.g. Gulf of Lion). To achieve this it requires a mature subduction (i.e. enough for a slab-pull) and a remaining "consumable" to subduct (oceanic domain/hyper-thinned crust). The other post-orogenic path following a collision, may be caused by the decrease of tectonic forces relative to body forces. This breaks the depth-surface equilibrium inherited from collision and lead to post-orogenic extension/collapse.
- 10 March 2020
- Published by Copernicus GmbH
Open AccessThe Pyrenees within the Iberian plate boundary: How much an orogenic lifecycle can be influenced by rift structural inheritances?
The Orogen project is a 5-years geosciences research program resulting from an alliance between the CNRS, the French geological survey (BRGM) and Total R&D. Focusing on the Africa-Europe diffuse plate boundary across Iberia, « Orogen » aims at to better understand orogenic processes and its driving mechanisms. One advantage of the project’s playground is that all of the orogenic maturity stages are today exposed from the incipient subduction of the Bay of Biscay to the post orogenic back-arc extension of the Gulf of Lion. One of the significant outcomes of the project is to reveal the fundamental control of the divergent setting on orogenesis through space and time. Through the reconstructed evolution of the Pyrenees, two main types of structural controls can be documented: 1) the crustal template and the spatial partitioning of rifts. Orogenesis starts by a pre-collision stage that consists in the subduction/underthrusting of an inherited divergent « consumable ». It corresponds to the domains located ahead of crustal necking zones (i.e. hyperextended rifts). An exception to the subduction fate of the « consumable » results from the 3D segmentation of rifts. At this stage, shortening needs to spatially linkup different rift axes by shortcutting relay zone. It results in by back stepping the “subduction” from one branch of rift to the other. It leads to anomalously sample pieces of the « consumable » on the upper plate of the subduction (e.g. Mauléon hyperextended rift in the Western Pyrenees). Once convergence consumes its « consumable », mature collision occurs when crustal necking zones interact with the "subduction" fault plane. Indeed, underthrusting more buoyant thicker crust requires an increase of tectonic stress. At the plate boundary scale, it forces convergence to reorganize spatially and implies the inversion of neighboring less mature branches of rifts by far field stress transmission rather than rupturing unstretched continental domains. When reaching a critical level of stress, crustal indentation starts and thick-skin nappe-stacking propagates beyond necking zones into thick crustal domains. Crustal thickening accelerates launching foreland basin dynamics while orogenic reliefs increase. The orogenic system tends to reach a new equilibrium between tectonic and body forces, accommodated strain, sustaining reliefs and their surface processes counterpart. Then, two end-member cases of post-orogenic dynamic can be defined. Starting right after early orogeny and forced by lateral mature collision, an orogenic system can enter in a "forced" back-arc dynamic (e.g. Gulf of Lion). To achieve this it requires a mature subduction (i.e. enough for a slab-pull) and a remaining "consumable" to subduct (oceanic domain/hyper-thinned crust). The other post-orogenic path following a collision, may be caused by the decrease of tectonic forces relative to body forces. This breaks the depth-surface equilibrium inherited from collision and lead to post-orogenic extension/collapse.