VAV. Andal

V. Andal

*This is an algorithmically generated author record based on publicly available information.

V. Andal has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Moisture Management Properties of Sportswear Finished with AC-ZnO Nanoparticles

    by G. Mohamed Zakriya, Andal. V, G. Jayanthi, R. Jayadharshini, K. Jaya Venkata Prasad, P. Jothika, E. Bhuvaneshwari

    The fabrics used to make sportswear should be able to regulate moisture levels and maintain heat balance in order to withstand increased perspiration during physical activity. The use of green synthesized activated carbon@zinc oxide (AC@ZnO) nanoparticle-functionalized textiles has shown promise in addressing the aforementioned problem. Green synthesis is used to create ZnO nanoparticles utilizing Artemisia pallen, a plant source, and activated porous carbon from biomass waste. To verify the phase formation and structure, the synthesized nanoparticles were examined using XRD and SEM. The synthesized nanoparticles were functionalized on the fabric in various composition to study its antimicrobial and moisture management properties. From the results, it was observed that the overall moisture management capacity (OMMC) of polypropylene-bamboo fabric is higher than that of the polyester-bamboo fabric. Both polypropylene-bamboo and polyester–bamboo fabrics exhibited effectiveness against Gram‑negative bacteria, and the tensile strength of polypropylene–bamboo fabric was also found to be superior compared to the polyester-bamboo fabric. Hence, AC@ZnO Np functionalized fabrics exhibits improved adsorption capacities and OMMC which facilitates their suitability for the fabrication of sportswear items for athletes.

  • Open Access

    TMAB modified NiFe2O4 nanoparticles for the Effective removal of Eriochrome Black-T azo dye

    by G. Jayanthi, V. Andal, M. Prabaharan, Suba Kannaiyan

    The Eriochrome Black-T (EBT) azo dye was removed from aqueous solution using TMAB (tetramethyl ammonium bromide) stabilised NiFe2O4 (TMAB@NFO) nanoparticles, which have been synthesized through polymeric precursor method. X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectra (FTIR) were used to analyse the TMAB@NFO nanoparticles. Adsorption studies were conducted under a variety of conditions, including pH, adsorbent dosage, and contact time, intraparticle diffusion, pseudo-first- and pseudo-second-order kinetic models were used to analyse the kinetic data. According to the systematic study of adsorption isotherms and kinetics models, TMAB@NFO nanoparticles will adsorb EBT dye utilising the Freundlich model and pseudo-second-order kinetics. The intraparticle diffusion model revealed a linear relationship (R2 - 0.98, 0.97, and 0.94 for TMAB@NiFe2O4 and bare NiFe2O4-NPs), demonstrating how surface modification influences the overall EBT adsorption process and the pore diffusion rate. Additionally, the manufactured nano adsorbents of NiFe2O4 were effectively regenerated and reused after the treatments up to four times following the elimination of 89% of EBT dye by TMAB@NiFe2O4-NPs. The results have demonstrated the enormous potential of TMAB @NiFe2O4-NPs to eliminate EBT in a practical way. KEY WORDS: Tetramethyl ammonium bromide, NiFe2O4, EBT, Surface capping, Adsorption, Kinetics Bull. Chem. Soc. Ethiop. 2024, 38(6), 1569-1581. DOI: https://dx.doi.org/10.4314/bcse.v38i6.6

  • Plant-Derived Nanoparticles for Heavy Metal Remediation

    by V. Andal, Karthik Kannan, V. Selvaraj, K. Suba


  • Open Access

    A Review on Synthesis, Properties, and Environmental Application of Fe-Based Perovskite

    by G. Jayanthi, Sowrirajan Sumathi, Karthik Kannan, V. Andal, Sivaraj Murugan

    Perovskite has attracted the attention of researchers owing to its intriguing physicochemical properties and wide applications. Recently, Fe-based Perovskite as well as its nanoforms is an extensively studied material due to its photocatalytic activity, multiferroic properties, and chemical stability. Fe-based Perovskite exhibits a range of characteristics that become helpful for different applications such as catalysis, electrochemical sensors, and solar cells. This review summarizes the synthesis, properties, and environmental applications of Fe-based Perovskite. This review highlights and provides an overview of the transition metal substituent in Fe-based Perovskite and its properties and how it influences its application in wastewater treatment and catalysis. This article furnishes an overview on synthesis, properties, and environmental application of Fe-based Perovskite.


  • Open Access

    Bio‐Based Graphene Sheet/Copolymer Composite as Supporting Material for Nanocatalysts towards Electrochemical Studies and Direct Alkaline Alcohol Fuel Cells

    by V. Selvaraj, R. ThamilMagal, V. Andal, K. Arunkumar, Sivaraj Murugan

    In this work, graphene carbon sheets (BGS) were prepared from writing paper and lemon peel, and its polymer composite has a higher surface area compared with the existing Vulcan carbon. Further, the use of lead as a promoter for the oxidation of alcohol and CO on platinum‐supported poly(amine‐terminated cyclophosphazene‐co‐cyclophosphazene)‐biobased graphene sheet (Poly(AFCP‐co‐CP)‐BGS) composite was demonstrated. The size, phase morphology, and distribution of metal nanoparticles on Poly(AFCP‐co‐CP)‐BGS composite as well as the formation of composite based catalysts were confirmed from TEM, XRD, and FTIR studies. The catalytic activity and stability of the prepared catalysts were tested and compared to methanol, ethylene glycol, glycerol, and CO in 0.5 M KOH solution. The results conclude that the lead‐doped Pt/Poly(AFCP‐co‐CP)‐BGS catalyst shows higher oxidation current with respect to onset potential and lower If/Ir ratio for alcohol as well as CO oxidation. In addition, Pt‐Pb/Poly(AFCP‐co‐CP)‐BGS catalyst was checked for direct alkaline fuel cells and proved as a potent anode catalyst in alkaline medium for real‐time fuel battery applications. In addition, Poly(AFCP‐co‐CP)‐BGS composite also promotes the catalytic reaction compared to Poly(AFCP‐co‐CP) and BGS supports as noticed from methanol oxidation in alkaline medium. The surface area of the prepared supporting material is 750.72 m2g-1, which is higher than the activated carbon (250.12m2g-1). So, the prepared Poly(AFCP‐co‐CP)‐BGS composite is a potent support for metal deposition, electrooxidation, and single stack fuel cell constructions.


  • Open Access

    Comparative Analysis of NOx Emission Reduction in Engines Using NiCo2O4 Nanoparticles without External Reductant at Low Temperatures: An Experimental Investigation

    by C. G. Aswin, A. Kumareswaran, R. Lakshmanan, S. Mathavan, V. Andal, R. Lakshmipathy, Ivan Leandro Rodriguez Rico

    Due to increasingly stringent rules, eliminating pollutants (NOx) emitted by diesel engines in the automobile sector remains an intriguing scientific and technological problem. To meet the strict NOx emission restrictions, a catalytic system with a high level of complexity, unit size, and quantity, as well as higher fuel consumption, is required. As a result, for a reduction in individual exhaust gas emissions, an after‐treatment system for a diesel vehicle must employ integrated catalyst technology. For selective catalytic reduction of NOx without any external reductant, a highly effective catalyst “spinel nickel cobaltite” (NiCo2O4) was produced using a polymeric precursor technique. In this work, an exhaust gas treatment system without external reductants using nano‐NiCo2O4 as catalyst was designed and fabricated, for NOx control in diesel and petrol engines at low temperature. In order to determine the NOx conversion efficiency in the selective catalytic reduction system, tests were carried out at different engine loads. The system was supposed to be cost‐effective due to the nano‐NiCo2O4 catalyst’s ability to work at low temperatures. The findings proved the developed SCR system’s potential to reduce NOx emissions. At a high load, the nitric oxide (NO) emissions were reduced by 54 and 96 percent, respectively, without increasing HC, CO, and CO2 emissions or compromising efficiency.


  • Open Access

    Synthesis of CuAl2O4 Nanoparticle and Its Conversion to CuO Nanorods

    by V. Andal, G. Buvaneswari, R. Lakshmipathy

    The molten salt approach was used to convert CuAl2O4 nanoparticles to CuO nanorods in this study. Molten hydroxide (NaOH) synthesis was chosen over molten salts (NaCl/KCl) for removing aluminium oxide from copper aluminate at low temperatures. The molten salt process is environmentally beneficial. Polymeric precursors were used to make nanosized copper aluminates. Alginic acid polymer is used to gel aqueous solutions of copper acetate and aluminium nitrate, yielding precursor after further heating. The precursor provides 14nm nanosized copper aluminates after being heated at 900C for 5 hours. XRD, FTIR, SEM, and TEM were used to characterize the nanosized copper aluminate powder. Solid state mixing and solution technique were used to investigate molten hydroxide treatment of spinel CuAl2O4. The products of the reaction were identified using XRD. FTIR and SEM are also used to analyze the sample. Using UV-DRS absorbance spectrum analysis, the optical characteristics of CuAl2O4 and CuO nanorods were examined. Using the Tauc plot method, the band gaps of CuAl2O4 and CuO were calculated to be 4.3 and 3.93eV.


  • Synthesis, Characterisation, and Antimicrobial Efficacy of Acid Fuchsin Schiff Base-Modified Silver Nanoparticles

    by Suba Kannaiyan, Easwaramoorthy, Karthik Kannan, V. Andal

    In the current work, silver nanoparticles (AgNPs) were green synthesized using starch and modified with anionic dye (acid fuchsin) and aldehyde (salicylaldehyde and cinnamaldehyde). Thus in situ formation of Schiff base stabilized AgNPs were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis. The size and the stability of the Schiff base modified AgNPs were explored using DLS and Zeta potential analysis. TEM analyses showed the size of the Schiff base (cinnamaldehyde) modified AgNPs with an average particle size of 5–10 nm. The synthesized Schiff base modified AgNPs were tested for their antibacterial efficacy against gram-negative bacteria such as Escherichia coli (MTCC733), Pseudomonas aeruginosa (MTCC1688) and gram-positive bacteria such as Bacillus subtilis (MTCC41) and Enterococcus faecalis (MTCC96). The antifungal activity of the synthesized materials has been studied against Candida albicans along with standard fluconazole. Higher antibacterial and antifungal activities were observed for the Schiff base (SB) capped AgNPs due to the combined effect of SB and AgNPs. The mechanism of the bactericidal activity of nanoparticles is suggested as due to the interaction of AgNPs with the cell membrane. The results of the present study confirm that SB stabilized AgNPs have significant potential as an antimicrobial agent in treating infectious diseases.


  • Silver oxide nano-colloid based selective colorimetric sensor for the recognition of cystine in aqueous solution

    by V. Andal, G. Bhuvaneswari

    Sodium alginate modified Ag2O (SA@Ag2O) nano-colloid is synthesised and studied colorimetric response towards eight selected amino acids in aqueous medium at room temperature. The synthesised SA@Ag2O nano-colloid showed a surface plasmon band at 469 nm. Distinctive colour change of the dark brown colloid to colourless is observed in the case of Cystine. Among the eight amino acids studied such as D-L- Aspartic acid, L-Glutamic acid, Glycine, Alanine, D-L Methionine, L-Cysteine, L-Cystine and L-Tyrosine. L-Cystine stands out by completely decolorising the brown colloid which can be detected by the ‘naked-eye’. This sensor selectively detects Cystine. To understand the sensing mechanism, the amino acid treated SA@Ag2O colloids were characterised by UV, XRD, FTIR and TEM analysis. This approach offers several advantages such as simplicity, low cost and high sensitivity. An environment friendly approach for the detection of cystine in aqueous solution using SA@Ag2O nano-colloid