Sivaraj Murugan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sivaraj Murugan has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Sreedharan Christopher Ezhil Singh
Department of Mechanical Engineering, Vimal Jyothi Engineering College, Kannur, Kerala, India
4 shared publications - Muthuraman Subbiah
Department of Engineering, University of Technology and Applied Sciences, Muscat 133, Oman
3 shared publications N. Selvakumar
Mepco Schlenk Engineering College
3 shared publications- V. Andal
Department of Chemistry, KCG College of Technology, Chennai, India
3 shared publications G. Jayanthi
Department of Research, Hindustan Institute of Technology and Science, Chennai, India
2 shared publications- A. Kajavali
Department of Mechanical Engineering, Government College of Engineering, Bargur, India
1 shared publication
Latest Publications
- Open Access
- 13 July 2025
- Published by Academic Publishing Pte. Ltd. in Building Engineering
- Vol. 3 (3)
Evaluation of the microbiological indoor air quality at a commercial building in Muscat, Oman, utilizing an all-air multi-zone HVAC system
This study evaluates the microbiological indoor air quality (IAQ) of a commercial office building in Muscat, Oman, equipped with an all-air multi-zone heating, ventilation, and air-conditioning (HVAC) system operating under hot-arid climatic conditions. Active air sampling was conducted at multiple locations, including open-plan offices, outdoor air intake, supply air diffusers, fan coil units, and the humidification water tank of the air handling unit (AHU), across different seasons. Airborne bacteria were analyzed using incubation at 22 ℃ and 37 ℃ to distinguish environmental and human-associated microbial populations, while fungal concentrations were assessed at 25 ℃, with results expressed as colony-forming units per cubic meter (CFU/m3). For analytical consistency, data from the three office spaces investigated were aggregated and evaluated as seasonal averages. Bacterial concentrations in indoor air generally ranged from 32 to 496 CFU/m3 at 37 ℃ and 4 to 500 CFU/m3 at 22 ℃, indicating low to moderate contamination levels under normal operating conditions. In contrast, a pronounced increase in fungal concentrations was observed during the initial winter sampling, exceeding 2000 CFU/m3, which was attributed to an exceptional flooding event. Comparative analysis of outdoor air, AHU-treated air, and indoor air demonstrated that the HVAC system effectively reduced microbial loads during standard climatic conditions. The findings provide region-specific baseline data on microbiological IAQ and highlight the influence of HVAC operation, seasonal variation, and extreme environmental events on indoor bioaerosol levels in commercial buildings located in hot-arid climates.
- 13 July 2025
- Published by Academic Publishing Pte. Ltd. in Building Engineering
- Vol. 3 (3)
Open AccessEvaluation of the microbiological indoor air quality at a commercial building in Muscat, Oman, utilizing an all-air multi-zone HVAC system
This study evaluates the microbiological indoor air quality (IAQ) of a commercial office building in Muscat, Oman, equipped with an all-air multi-zone heating, ventilation, and air-conditioning (HVAC) system operating under hot-arid climatic conditions. Active air sampling was conducted at multiple locations, including open-plan offices, outdoor air intake, supply air diffusers, fan coil units, and the humidification water tank of the air handling unit (AHU), across different seasons. Airborne bacteria were analyzed using incubation at 22 ℃ and 37 ℃ to distinguish environmental and human-associated microbial populations, while fungal concentrations were assessed at 25 ℃, with results expressed as colony-forming units per cubic meter (CFU/m3). For analytical consistency, data from the three office spaces investigated were aggregated and evaluated as seasonal averages. Bacterial concentrations in indoor air generally ranged from 32 to 496 CFU/m3 at 37 ℃ and 4 to 500 CFU/m3 at 22 ℃, indicating low to moderate contamination levels under normal operating conditions. In contrast, a pronounced increase in fungal concentrations was observed during the initial winter sampling, exceeding 2000 CFU/m3, which was attributed to an exceptional flooding event. Comparative analysis of outdoor air, AHU-treated air, and indoor air demonstrated that the HVAC system effectively reduced microbial loads during standard climatic conditions. The findings provide region-specific baseline data on microbiological IAQ and highlight the influence of HVAC operation, seasonal variation, and extreme environmental events on indoor bioaerosol levels in commercial buildings located in hot-arid climates.
- Open Access
- 30 June 2025
- Published by University of Chemistry and Technology - Faculty of Environmental Technology in Paliva
- p. 20-26
Experimental studies on CI engine performance ad emission usingneem-based biodiesel as an alternative fuel
The depletion of fossil fuels and increasing greenhouse gas emissions have intensified interest in biodiesel as a feasible substitute for fossil fuels. Biodiesel has multiple benefits, such as its renewability and reduced emissions of toxic exhaust upon combustion. This study examines the generation of Neem seed biodiesel and its impact on the performance of compression ignition (CI) engines when combined with pure diesel. The biodiesel was produced by the transesterification process. Transesterification occurred in two phases: acid catalysis and base catalysis. Three unique blends were produced by amalgamating neem biodiesel with pure diesel (B10, B15, and B20). The performance of various combinations was evaluated and contrasted with that of pure diesel. As the load increased, the brake thermal efficiency and specific fuel consumption of all blends enhanced. Hydrocarbons, carbon monoxide, and smoke opacity were diminished in comparison to pure diesel. Nitrogen oxides increased with load in all mixes relative to pure diesel. This study indicates that neem-based biodiesel serves as a viable alternative to conventional diesel.
- 30 June 2025
- Published by University of Chemistry and Technology - Faculty of Environmental Technology in Paliva
- p. 20-26
Open AccessExperimental studies on CI engine performance ad emission usingneem-based biodiesel as an alternative fuel
The depletion of fossil fuels and increasing greenhouse gas emissions have intensified interest in biodiesel as a feasible substitute for fossil fuels. Biodiesel has multiple benefits, such as its renewability and reduced emissions of toxic exhaust upon combustion. This study examines the generation of Neem seed biodiesel and its impact on the performance of compression ignition (CI) engines when combined with pure diesel. The biodiesel was produced by the transesterification process. Transesterification occurred in two phases: acid catalysis and base catalysis. Three unique blends were produced by amalgamating neem biodiesel with pure diesel (B10, B15, and B20). The performance of various combinations was evaluated and contrasted with that of pure diesel. As the load increased, the brake thermal efficiency and specific fuel consumption of all blends enhanced. Hydrocarbons, carbon monoxide, and smoke opacity were diminished in comparison to pure diesel. Nitrogen oxides increased with load in all mixes relative to pure diesel. This study indicates that neem-based biodiesel serves as a viable alternative to conventional diesel.
- 22 May 2025
- Published by Springer Nature in Chemistry Africa
- Vol. 8 (5) , 2055-2067
Investigation of the Microwave Absorption Properties of Silane-Modified Activated Carbon @ ZnFe2O4 Binary Nanocomposite
- 22 May 2025
- Published by Springer Nature in Chemistry Africa
- Vol. 8 (5) , 2055-2067
Investigation of the Microwave Absorption Properties of Silane-Modified Activated Carbon @ ZnFe2O4 Binary Nanocomposite
- Open Access
- 24 January 2023
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2023, 1-7
Experimental Analysis for Nitrogen Oxide Reduction in a Diesel Engine by the Hydrogen-Assisted Selective Catalytic Reduction Technique
Diesel engine emissions pose a serious threat to the environment and cause inevitable hazards to the atmosphere. The technique that is used to control and combat nitrogen oxide (NOX) emissions is selective catalytic reduction. However, the various experimental conditions in the SCR technique will reduce NOX emissions. Former studies experimentally discovered the decrease of NOx discharges at a higher temperature. In this study, a two-cylinder diesel engine with a 34 kW rated power at 3750 rpm under low-temperature operating conditions underwent hydrogen-assisted selective catalytic reduction of NOx. The experiment was performed by differing the hydrogen injection duration (040CA) and NOX emissions were studied. Variation in emissions with H2 injection was investigated. On varying the hydrogen injection duration, NOX, HC, CO2, CO, and smoke emissions are reduced (mention the of reduction) and it can be applied in real time to reduce global warming.
- 24 January 2023
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2023, 1-7
Open AccessExperimental Analysis for Nitrogen Oxide Reduction in a Diesel Engine by the Hydrogen-Assisted Selective Catalytic Reduction Technique
Diesel engine emissions pose a serious threat to the environment and cause inevitable hazards to the atmosphere. The technique that is used to control and combat nitrogen oxide (NOX) emissions is selective catalytic reduction. However, the various experimental conditions in the SCR technique will reduce NOX emissions. Former studies experimentally discovered the decrease of NOx discharges at a higher temperature. In this study, a two-cylinder diesel engine with a 34 kW rated power at 3750 rpm under low-temperature operating conditions underwent hydrogen-assisted selective catalytic reduction of NOx. The experiment was performed by differing the hydrogen injection duration (040CA) and NOX emissions were studied. Variation in emissions with H2 injection was investigated. On varying the hydrogen injection duration, NOX, HC, CO2, CO, and smoke emissions are reduced (mention the of reduction) and it can be applied in real time to reduce global warming.
- Open Access
- 15 October 2022
- Published by Wiley in International Journal of Digital Multimedia Broadcasting
- Vol. 2022, 1-5
Effectiveness of Feature Extraction by PCA-Based Detection and Naive Bayes Classifier for Glaucoma Images
After cataract, glaucoma is one of the second leading retinal diseases in the world. This paper presents the methodology to detect the glaucoma using principal component analysis. The images are involved in dilation as a preprocessing, enhancement using the contrast limited adaptive histogram equalization method, and followed by the extraction of features using principal component analysis. The extracted features are classified using support vector machine, Naive Bayes, and K-nearest neighbor classifiers. Comparing with other classifiers, the Naive Bayes provides high accuracy of 95% which demonstrates the effectiveness of the feature extraction and the classifier.
- 15 October 2022
- Published by Wiley in International Journal of Digital Multimedia Broadcasting
- Vol. 2022, 1-5
Open AccessEffectiveness of Feature Extraction by PCA-Based Detection and Naive Bayes Classifier for Glaucoma Images
After cataract, glaucoma is one of the second leading retinal diseases in the world. This paper presents the methodology to detect the glaucoma using principal component analysis. The images are involved in dilation as a preprocessing, enhancement using the contrast limited adaptive histogram equalization method, and followed by the extraction of features using principal component analysis. The extracted features are classified using support vector machine, Naive Bayes, and K-nearest neighbor classifiers. Comparing with other classifiers, the Naive Bayes provides high accuracy of 95% which demonstrates the effectiveness of the feature extraction and the classifier.
- Open Access
- 20 September 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-14
A Review on Synthesis, Properties, and Environmental Application of Fe-Based Perovskite
Perovskite has attracted the attention of researchers owing to its intriguing physicochemical properties and wide applications. Recently, Fe-based Perovskite as well as its nanoforms is an extensively studied material due to its photocatalytic activity, multiferroic properties, and chemical stability. Fe-based Perovskite exhibits a range of characteristics that become helpful for different applications such as catalysis, electrochemical sensors, and solar cells. This review summarizes the synthesis, properties, and environmental applications of Fe-based Perovskite. This review highlights and provides an overview of the transition metal substituent in Fe-based Perovskite and its properties and how it influences its application in wastewater treatment and catalysis. This article furnishes an overview on synthesis, properties, and environmental application of Fe-based Perovskite.
- 20 September 2022
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-14
Open AccessA Review on Synthesis, Properties, and Environmental Application of Fe-Based Perovskite
Perovskite has attracted the attention of researchers owing to its intriguing physicochemical properties and wide applications. Recently, Fe-based Perovskite as well as its nanoforms is an extensively studied material due to its photocatalytic activity, multiferroic properties, and chemical stability. Fe-based Perovskite exhibits a range of characteristics that become helpful for different applications such as catalysis, electrochemical sensors, and solar cells. This review summarizes the synthesis, properties, and environmental applications of Fe-based Perovskite. This review highlights and provides an overview of the transition metal substituent in Fe-based Perovskite and its properties and how it influences its application in wastewater treatment and catalysis. This article furnishes an overview on synthesis, properties, and environmental application of Fe-based Perovskite.
- Open Access
- 23 March 2022
- Published by Wiley in Modelling and Simulation in Engineering
- Vol. 2022, 1-9
Performance Characterization of a Solar Cavity Collector Using Artificial Neural Network
It is mandatory to improve the design of the flat plate collector (FPC) used for solar thermal applications to perform well. One way to improve the performance characteristics of FPC is to retain the heat energy available inside the collector. That is, a collector should be capable to give more heat energy to working fluid for a longer duration. It has been implemented in such a way in an entertained and improved model which is known as solar cavity collector (SCC). It consists of 5 numbers of cavities equipped with inlet and outlet tubes. The same having with an enclosure has been constructed and investigated to find the optimal performance. In general, the physical dimensions of the collector influence more the functioning behaviors of SCC. The performance variables that are considered for the present study are the comparison between 5 and 7 numbers of cavities and the effect of aperture entry. Collector angle of tilt, two types of flow mode, and water mass flow rates are the other performance variables that are also considered. The data from the experimentations are trained, tested, and validated with the help of the artificial neural network (ANN). The accuracy of the model is 96%, and the end results revealed the same trend followed by both experimental and ANN simulation results. Also, the variations that occur between ANN and experimented results are ±4%.
- 23 March 2022
- Published by Wiley in Modelling and Simulation in Engineering
- Vol. 2022, 1-9
Open AccessPerformance Characterization of a Solar Cavity Collector Using Artificial Neural Network
It is mandatory to improve the design of the flat plate collector (FPC) used for solar thermal applications to perform well. One way to improve the performance characteristics of FPC is to retain the heat energy available inside the collector. That is, a collector should be capable to give more heat energy to working fluid for a longer duration. It has been implemented in such a way in an entertained and improved model which is known as solar cavity collector (SCC). It consists of 5 numbers of cavities equipped with inlet and outlet tubes. The same having with an enclosure has been constructed and investigated to find the optimal performance. In general, the physical dimensions of the collector influence more the functioning behaviors of SCC. The performance variables that are considered for the present study are the comparison between 5 and 7 numbers of cavities and the effect of aperture entry. Collector angle of tilt, two types of flow mode, and water mass flow rates are the other performance variables that are also considered. The data from the experimentations are trained, tested, and validated with the help of the artificial neural network (ANN). The accuracy of the model is 96%, and the end results revealed the same trend followed by both experimental and ANN simulation results. Also, the variations that occur between ANN and experimented results are ±4%.
- Open Access
- 17 January 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-13
Mechanical Behavior of Polymer Composites Reinforced with Coir and Date Palm Frond Fibers
This article explains to study the feasibility of natural fiber (date palm frond and coir fibers from Oman) reinforced polymer composite laminates processed using the hand lay method. Untreated and alkali-treated fiber composite laminate specimens of longitudinal and transverse direction fibers were subjected to various mechanical property tests (such as tensile, flexural, compression, shear, and hardness). Results show that the required polymer composite is ecofriendly, has no harm by natural fiber composite, and enhances mechanical strength and low density with specific strength. Hence, it is suitable for industrial and structural applications due to its improved mechanical properties.
- 17 January 2022
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2022, 1-13
Open AccessMechanical Behavior of Polymer Composites Reinforced with Coir and Date Palm Frond Fibers
This article explains to study the feasibility of natural fiber (date palm frond and coir fibers from Oman) reinforced polymer composite laminates processed using the hand lay method. Untreated and alkali-treated fiber composite laminate specimens of longitudinal and transverse direction fibers were subjected to various mechanical property tests (such as tensile, flexural, compression, shear, and hardness). Results show that the required polymer composite is ecofriendly, has no harm by natural fiber composite, and enhances mechanical strength and low density with specific strength. Hence, it is suitable for industrial and structural applications due to its improved mechanical properties.
- Open Access
- 6 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Bio‐Based Graphene Sheet/Copolymer Composite as Supporting Material for Nanocatalysts towards Electrochemical Studies and Direct Alkaline Alcohol Fuel Cells
In this work, graphene carbon sheets (BGS) were prepared from writing paper and lemon peel, and its polymer composite has a higher surface area compared with the existing Vulcan carbon. Further, the use of lead as a promoter for the oxidation of alcohol and CO on platinum‐supported poly(amine‐terminated cyclophosphazene‐co‐cyclophosphazene)‐biobased graphene sheet (Poly(AFCP‐co‐CP)‐BGS) composite was demonstrated. The size, phase morphology, and distribution of metal nanoparticles on Poly(AFCP‐co‐CP)‐BGS composite as well as the formation of composite based catalysts were confirmed from TEM, XRD, and FTIR studies. The catalytic activity and stability of the prepared catalysts were tested and compared to methanol, ethylene glycol, glycerol, and CO in 0.5 M KOH solution. The results conclude that the lead‐doped Pt/Poly(AFCP‐co‐CP)‐BGS catalyst shows higher oxidation current with respect to onset potential and lower If/Ir ratio for alcohol as well as CO oxidation. In addition, Pt‐Pb/Poly(AFCP‐co‐CP)‐BGS catalyst was checked for direct alkaline fuel cells and proved as a potent anode catalyst in alkaline medium for real‐time fuel battery applications. In addition, Poly(AFCP‐co‐CP)‐BGS composite also promotes the catalytic reaction compared to Poly(AFCP‐co‐CP) and BGS supports as noticed from methanol oxidation in alkaline medium. The surface area of the prepared supporting material is 750.72 m2g-1, which is higher than the activated carbon (250.12m2g-1). So, the prepared Poly(AFCP‐co‐CP)‐BGS composite is a potent support for metal deposition, electrooxidation, and single stack fuel cell constructions.
- 6 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
Open AccessBio‐Based Graphene Sheet/Copolymer Composite as Supporting Material for Nanocatalysts towards Electrochemical Studies and Direct Alkaline Alcohol Fuel Cells
In this work, graphene carbon sheets (BGS) were prepared from writing paper and lemon peel, and its polymer composite has a higher surface area compared with the existing Vulcan carbon. Further, the use of lead as a promoter for the oxidation of alcohol and CO on platinum‐supported poly(amine‐terminated cyclophosphazene‐co‐cyclophosphazene)‐biobased graphene sheet (Poly(AFCP‐co‐CP)‐BGS) composite was demonstrated. The size, phase morphology, and distribution of metal nanoparticles on Poly(AFCP‐co‐CP)‐BGS composite as well as the formation of composite based catalysts were confirmed from TEM, XRD, and FTIR studies. The catalytic activity and stability of the prepared catalysts were tested and compared to methanol, ethylene glycol, glycerol, and CO in 0.5 M KOH solution. The results conclude that the lead‐doped Pt/Poly(AFCP‐co‐CP)‐BGS catalyst shows higher oxidation current with respect to onset potential and lower If/Ir ratio for alcohol as well as CO oxidation. In addition, Pt‐Pb/Poly(AFCP‐co‐CP)‐BGS catalyst was checked for direct alkaline fuel cells and proved as a potent anode catalyst in alkaline medium for real‐time fuel battery applications. In addition, Poly(AFCP‐co‐CP)‐BGS composite also promotes the catalytic reaction compared to Poly(AFCP‐co‐CP) and BGS supports as noticed from methanol oxidation in alkaline medium. The surface area of the prepared supporting material is 750.72 m2g-1, which is higher than the activated carbon (250.12m2g-1). So, the prepared Poly(AFCP‐co‐CP)‐BGS composite is a potent support for metal deposition, electrooxidation, and single stack fuel cell constructions.
- Open Access
- 1 October 2021
- Published by IOP Publishing in Materials Research Express
- Vol. 8 (10) , 105007
Influence of AZ91 alloy reinforced with nano B4C particles on microstructural characterization, hardness and tribological properties prepared through powder metallurgy
In this present work, a milled B4C nanoparticle was reinforced into the AZ91 alloy with different weight percentages (5, 10, 15, and 20 %) by powder metallurgy. Crystalline behavior and morphology of AZ91-xB4C composite were observed with the help of XRD and SEM. The wear resistance on the load and Sliding Distance (SD) of the specimen was measured by the pin-on-disc apparatus and Vickers hardness machine to measure hardness. Wear loss decreased gradually with the addition of milled B4C nanoparticles is identified for AZ91-xB4C nanocomposites. Coefficients of friction (COF) increased with an increase in load for AZ91-xB4C nanocomposites. Microhardness was linear with the increase in the wt. % of milled B4C nanoparticles. The worn surface micrograph was also studied using a scanning electron microscope.
- 1 October 2021
- Published by IOP Publishing in Materials Research Express
- Vol. 8 (10) , 105007
Open AccessInfluence of AZ91 alloy reinforced with nano B4C particles on microstructural characterization, hardness and tribological properties prepared through powder metallurgy
In this present work, a milled B4C nanoparticle was reinforced into the AZ91 alloy with different weight percentages (5, 10, 15, and 20 %) by powder metallurgy. Crystalline behavior and morphology of AZ91-xB4C composite were observed with the help of XRD and SEM. The wear resistance on the load and Sliding Distance (SD) of the specimen was measured by the pin-on-disc apparatus and Vickers hardness machine to measure hardness. Wear loss decreased gradually with the addition of milled B4C nanoparticles is identified for AZ91-xB4C nanocomposites. Coefficients of friction (COF) increased with an increase in load for AZ91-xB4C nanocomposites. Microhardness was linear with the increase in the wt. % of milled B4C nanoparticles. The worn surface micrograph was also studied using a scanning electron microscope.