HQHuawei Qiao

Huawei Qiao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huawei Qiao has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Overcoming the Processability–Property Trade-Off in Biobased Thermoplastic Vulcanizates via Reactive Plasticization

    by Junyu Qi, Wenjie Wu, Huawei Qiao, Baochun Guo, Liqun Zhang, Zhao Wang

    Developing biobased and high-performance thermoplastic vulcanizates (TPVs) represents a vital paradigm shift toward sustainable elastomer engineering and a circular economy, yet their industrial processing is severely constrained by the melt-fluidity bottleneck. Conventional approaches typically rely on physical plasticization, which inherently suffers from the thermodynamically uncontrolled migration and uncontrolled phase redistribution of volatile plasticizers, inevitably compromising mechanical integrity and environmental friendliness. Herein, a green grafting plasticization strategy is developed to construct biobased TPVs (BBTPVs) consisting of poly(lactic acid) (PLA) and biobased polyester rubber (BPR) via in situ dynamic vulcanization. Tributyl citrate (TBC) is covalently grafted onto the PLA-based polymer structure using poly(ethylene glycol) diglycidyl ether as a reactive bridging agent, rendering the viscoelasticity of the grafted PLA precisely tunable and extending the phase inversion window during dynamic vulcanization. This widened time window enables efficient shear-induced breakup of the rubber phase at relatively low crosslink densities, yielding a refined sea-island morphology with the rubber particle size reduced from 2.04 to 1.17 μm compared to the physical blend. Consequently, the BBTPV achieves a tensile strength of 15.9 MPa and an elongation at break of 439%, representing improvements of 42% and 43%, respectively. Moreover, covalent bonding effectively suppresses plasticizer migration under organic solvent exposure and high temperatures, ensuring long-term service stability. Segmental mobility analysis further elucidates the mechanisms underlying the enhanced extrusion processability and excellent recyclability. Overall, this work provides a viable pathway toward high-performance, sustainable TPVs that overcome the processability–mechanical property trade-off.

  • Janus nanoparticles as efficient interface compatibilizer in blends of polylactide and elastomers: Importance of interfacial relaxation on toughening

    by Huawei Qiao, Bingrui Yang, Botuo Zheng, Mingfeng Chen, Ruth Cardinaels, Paula Moldenaers, Khalid Lamnawar, Abderrahim Maazouz, Huagui Zhang

    For blending immiscible polymers, such as in the toughening modification of polylactide (PLA) via blending with rubbery materials, interfacial compatibilization is of great significance while the mechanism, especially the role of interfacial rheology, remains elusive. In this study, styrene-butadiene block copolymer elastomer (SBC) was employed to toughen PLA and a dumbbell-shaped Janus nanoparticle (JNP) consisting of polymethyl methacrylate and polystyrene spheres with equal size (∼80 nm) was used as the compatibilizer. Located at the interface, JNPs exhibited a great compatibilization efficiency in PLA/SBC blends, as demonstrated by the good morphology stabilization against droplet coalescence under static annealing and low shear flow conditions, as well as by the resistance against droplet breakup under high shear flow conditions. Moreover, as revealed from the linear viscoelasticity of JNP compatibilized blends, when JNP loading is more than 2 phr, aside from shape relaxation, an interfacial relaxation dominated by Marangoni stress was observed, indicating the possibility of particle redistribution on droplet surfaces. However, when loading is more than 4 phr, relaxations in the terminal zone no longer exist, implying the possible formation of a particle network on the droplet surface. This is consistent with the mechanical properties. The blend shows the greatest toughness at JNP loading around 3 phr, while the toughness is very poor when JNP loading is either too low or too high. This suggests interfacial relaxation to be crucial to guarantee a good toughening effect of SBC in PLA.


  • Understanding the Rheology of Polymer–Polymer Interfaces Covered with Janus Nanoparticles: Polymer Blends versus Particle Sandwiched Multilayers

    by Huawei Qiao, Botuo Zheng, Gang Zhong, Zhicong Li, Ruth Cardinaels, Paula Moldenaers, Khalid Lamnawar, Abderrahim Maazouz, Canpei Liu, Huagui Zhang


  • From laboratory to industrialization: Eco‐friendly flame retardant endowing epoxy resin with excellent flame retardancy, transparency, and mechanical properties

    by Huawei Qiao, Liping Su, Canpei Liu, Huagui Zhang, Mingfeng Chen

    To eliminate the fire safety hazards (flammability and smoke toxicity) of epoxy resins (EP), while reaching industrial production of flame retardants, we proposed a facile strategy to successfully synthesize an industrially scalable phosphorus‐nitrogen flame retardant (named FNU) by the substitution reaction of 2‐(2‐aminoethylamino) ethanol and 9,10‐dihydro‐9‐oxo‐10‐phosphofi‐10‐oxide. FNU was synthesized in a simple and heat‐free step with room temperature stirring, and such process optimizations facilitate industrially scalable. As expected, FNU endowed EP with excellent flame retardancy and smoke suppression properties. EP mixing with 10 phr of FNU reached the highest limiting oxygen index value of 44.5%, UL‐94 reached V‐0 level, total smoke production and total heat release were reduced by 15.5% and 19.8% compared with pure EP. Residual carbon analysis showed that the presence of FNU could promote to form dense and continuous carbon layer. Thermogravimetric analysis‐infrared spectrometry results demonstrated a significant reduction in the pyrolysis products, especially in the yield of CO. Moreover, the structure of FNU contained aromatic rigid and reactive amine groups that significantly improved the mechanical properties of EP without affecting its transparency, retaining its value for applications in optical materials.


  • Open Access

    Novel Si/N/P‐Containing Flame Retardant for Epoxy Resin with Excellent Comprehensive Performance

    by Chen Mingfeng, Qiao Huawei, Li Shanshan, Zhong Wei, Lan Jiashui, Liu Canpei, Zhang Huagui

    Because of the highly inherent flammability of epoxy resin (EP), its application especially in high‐performance fields that have demands on flame retardancy was greatly limited. Herein, a novel Si/N/P‐containing flame retardant (PMBZ) was prepared to solve the flammability defects of EP. In particular, the sample with 10.0 wt% PMBZ reached a limiting oxygen index (LOI) of 32.4 % and could successfully pass UL‐94 V‐0 rating. Meanwhile, there was a 16.1 % and 22.4 % decrease in total smoke production (TSP) and total heat release (THR), respectively. The satisfactory flame retardancy and smoke suppression were due to the introduction of PMBZ, which could function both in condensed and gas phases through forming a compact and coherence self‐extinguishing char layer and inducing a dilution effect. More importantly, the tensile strength, impact strength and flexural strength had also increased by 33.0 %, 53.7 % and 20.7 %, respectively, which indicated the incorporation of PMBZ could also maintain its desired mechanical properties due to the excellent compatibility and enhanced intermolecular interactions. This work provides an exploitable flame retardant additive for epoxy resin to guarantee a superior flame retardancy, favorable smoke suppression and mechanical properties.


  • Smoke suppression and thermal conductivity of epoxy resin modified byAl2O3and hyperbranched flame retardant

    by Huawei Qiao, Xiuhuang Lin, Wei Zhong, Jiashui Lan, Huagui Zhang, Mingfeng Chen

    In this work, aluminum oxide (Al2O3) was added to hyperbranched flame retardant (PTDOB) modified epoxy resin (EP) system to develop a novel EP thermoset (Al2O3‐PTDOB/EP) with superior comprehensive performance. Al2O3‐PTDOB/EP exhibited excellent flame retardancy, smoke‐suppressing effects, and enhanced mechanical properties due to the crack pinning effects caused by the introduction of Al2O3. In detail, the limiting oxygen index (LOI) and UL‐94 rating of Al2O3‐PTDOB/EP‐3 reached 34.6% and V‐0 rating, respectively. Cone calorimeter test showed that the total heat release, total smoke production (TSP) and average effective heat of combustion of Al2O3‐PTDOB/EP‐3 were reduced by 14.5, 27.3 and 19.2% in comparison to PTDOB/EP, respectively. Furthermore, the impact, tensile and flexural strengths of Al2O3‐PTDOB/EP‐3 were significantly improved by 16.7 28.4 and 10.7%, respectively, because the addition of Al2O3provided the carbon layer barrier and crack pinning effect for the EP matrix. Moreover, thermal conductivity of Al2O3‐PTDOB/EP was also improved due to the excellent thermal conductivity of Al2O3, which had broadened its application in the field of electronic packaging.